TY  - JOUR
AU  - Radivojević, Jelena
AU  - Ivanović, Evica
AU  - Popović-Đorđević, Jelena
AU  - Trišović, Nemanja
AU  - Banjac, Nebojša
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4286
AB  - The solvent influence on absorption spectra of food azo dyes was examined by the method of Linear Solvation Energy Relationships (LSER). For this purpose, six azo dyes were used: tartrazine (E 102), ponceau 4R (E 124), azorubin (E 122), brilliant black (E 151), amaranth (E 123) and gelb orange S (E 110). Absorption spectra of dissolved azo dye have been recorded in the wavelength range of visible radiation, or from 380 to 760 nm, in eight solvent of different polarity. The choice of the solvent was limited due to the high polarity of the azo dye molecules themselves. The effect of solvent dipolarity/polarizability and solvent/solute hydrogen bonding interaction are analysed by means of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The linear correlation of the absorption maxima with parameters of Kamlet-Taft solvatochrome equation yielded satisfactory results.
AB  - Uticaj polarnosti rastvarača na apsorpcione spektre prehrambenih azo boja ispitivan je metodom linearne korelacije energije solvatacije (LSER). U ovu svrhu korišćeno je šest prehrambenih azo boja i to: tartrazin (E 102), ponceau 4R (E 124), azorubin (E 122), brilijant crna (E 151), amarant (E 123) i gelb oranž S (E 110). Apsorpcioni spektri rastvorenih azo boja određeni su u talasnom opsegu vidljivog zračenja, odnosno u opsegu od 380 do 760 nm, u osam rastvarača različite polarnosti. Polarnost samih boja je uticala na izbor malog broja polarnih rastvarača. Spektre ispitivanih azo boja karakteriše jedan apsorpcioni maksimum. Efekat polarnosti rastvarača i efakat vodoničnog vezivanja rastvarač-rastvorena supstanca ispitivan je primenom KamletTaftove solvatohromne jednačine. Linearna korelacija apsorbcionih maksimuma sa parametrima Kamlet-Taftove solvatohromne jednačine dala je zadovoljavajuće rezultate.
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Solvent influence on absorption spectra of food azo dyes
T1  - Uticaj rastvarača na apsorpcione spektre prehrambenih azo boja
EP  - 335
IS  - 4
SP  - 331
VL  - 60
DO  - 10.5937/zasmat1904331R
ER  - 

@article{
author = "Radivojević, Jelena and Ivanović, Evica and Popović-Đorđević, Jelena and Trišović, Nemanja and Banjac, Nebojša",
year = "2019",
abstract = "The solvent influence on absorption spectra of food azo dyes was examined by the method of Linear Solvation Energy Relationships (LSER). For this purpose, six azo dyes were used: tartrazine (E 102), ponceau 4R (E 124), azorubin (E 122), brilliant black (E 151), amaranth (E 123) and gelb orange S (E 110). Absorption spectra of dissolved azo dye have been recorded in the wavelength range of visible radiation, or from 380 to 760 nm, in eight solvent of different polarity. The choice of the solvent was limited due to the high polarity of the azo dye molecules themselves. The effect of solvent dipolarity/polarizability and solvent/solute hydrogen bonding interaction are analysed by means of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The linear correlation of the absorption maxima with parameters of Kamlet-Taft solvatochrome equation yielded satisfactory results., Uticaj polarnosti rastvarača na apsorpcione spektre prehrambenih azo boja ispitivan je metodom linearne korelacije energije solvatacije (LSER). U ovu svrhu korišćeno je šest prehrambenih azo boja i to: tartrazin (E 102), ponceau 4R (E 124), azorubin (E 122), brilijant crna (E 151), amarant (E 123) i gelb oranž S (E 110). Apsorpcioni spektri rastvorenih azo boja određeni su u talasnom opsegu vidljivog zračenja, odnosno u opsegu od 380 do 760 nm, u osam rastvarača različite polarnosti. Polarnost samih boja je uticala na izbor malog broja polarnih rastvarača. Spektre ispitivanih azo boja karakteriše jedan apsorpcioni maksimum. Efekat polarnosti rastvarača i efakat vodoničnog vezivanja rastvarač-rastvorena supstanca ispitivan je primenom KamletTaftove solvatohromne jednačine. Linearna korelacija apsorbcionih maksimuma sa parametrima Kamlet-Taftove solvatohromne jednačine dala je zadovoljavajuće rezultate.",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Solvent influence on absorption spectra of food azo dyes, Uticaj rastvarača na apsorpcione spektre prehrambenih azo boja",
pages = "335-331",
number = "4",
volume = "60",
doi = "10.5937/zasmat1904331R"
}

Radivojević, J., Ivanović, E., Popović-Đorđević, J., Trišović, N.,& Banjac, N.. (2019). Solvent influence on absorption spectra of food azo dyes. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 60(4), 331-335.
https://doi.org/10.5937/zasmat1904331R

Radivojević J, Ivanović E, Popović-Đorđević J, Trišović N, Banjac N. Solvent influence on absorption spectra of food azo dyes. in Zaštita materijala. 2019;60(4):331-335.
doi:10.5937/zasmat1904331R .

Radivojević, Jelena, Ivanović, Evica, Popović-Đorđević, Jelena, Trišović, Nemanja, Banjac, Nebojša, "Solvent influence on absorption spectra of food azo dyes" in Zaštita materijala, 60, no. 4 (2019):331-335,
https://doi.org/10.5937/zasmat1904331R . .

TY  - JOUR
AU  - Radmilović, Vuk
AU  - Kacher, Josh
AU  - Ivanović, Evica
AU  - Minor, Andrew M.
AU  - Radmilović, Velimir R.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3410
AB  - Detailed defect structure of dendrite formation was studied in order to connect the mesoscopic with the atomistic structure. It was demonstrated that twinning and stacking fault formation play a central role in the growth of electrodeposited Ag dendrites. The broad faces of Ag dendrites and the main trunk growth direction were found to be ((1) over bar 11) and [(1) over bar1 (2) over bar], respectively. Dendrite branches also formed and grew from the main trunk parallel to the [12 (1) over bar] and [(211) over bar] crystallographic directions. Twins and stacking faults were found to reside on the {111} crystallographic planes, as expected for a face centered cubic (FCC) Ag crystal. Using electron back scattered diffraction (EBSD) we found two variants of in-plane 60 degrees rotational twin domains in the ((1) over bar 11) broad dendrite surface plane. The intersections of twins and stacking faults with dendrite arm surfaces are perpendicular to the (112) arm growth directions. However, occasionally twins on the {111} planes parallel to the (112) arm growth directions were also observed. Although defect assisted dendrite growth is facilitated by twinning and stacking fault formation on {111} planes, the growth directions of the trunk and branches are not of the (111) type, but rather close to (112). The (112) growth directions are maintained by breaking dendrite facets into thermodynamically stable 111 and 200 steps and structural ledges of different length.
PB  - Amer Chemical Soc, Washington
T2  - Crystal Growth & Design
T1  - Multiple Twinning and Stacking Faults in Silver Dendrites
EP  - 474
IS  - 1
SP  - 467
VL  - 16
DO  - 10.1021/acs.cgd.5b01459
ER  - 

@article{
author = "Radmilović, Vuk and Kacher, Josh and Ivanović, Evica and Minor, Andrew M. and Radmilović, Velimir R.",
year = "2016",
abstract = "Detailed defect structure of dendrite formation was studied in order to connect the mesoscopic with the atomistic structure. It was demonstrated that twinning and stacking fault formation play a central role in the growth of electrodeposited Ag dendrites. The broad faces of Ag dendrites and the main trunk growth direction were found to be ((1) over bar 11) and [(1) over bar1 (2) over bar], respectively. Dendrite branches also formed and grew from the main trunk parallel to the [12 (1) over bar] and [(211) over bar] crystallographic directions. Twins and stacking faults were found to reside on the {111} crystallographic planes, as expected for a face centered cubic (FCC) Ag crystal. Using electron back scattered diffraction (EBSD) we found two variants of in-plane 60 degrees rotational twin domains in the ((1) over bar 11) broad dendrite surface plane. The intersections of twins and stacking faults with dendrite arm surfaces are perpendicular to the (112) arm growth directions. However, occasionally twins on the {111} planes parallel to the (112) arm growth directions were also observed. Although defect assisted dendrite growth is facilitated by twinning and stacking fault formation on {111} planes, the growth directions of the trunk and branches are not of the (111) type, but rather close to (112). The (112) growth directions are maintained by breaking dendrite facets into thermodynamically stable 111 and 200 steps and structural ledges of different length.",
publisher = "Amer Chemical Soc, Washington",
journal = "Crystal Growth & Design",
title = "Multiple Twinning and Stacking Faults in Silver Dendrites",
pages = "474-467",
number = "1",
volume = "16",
doi = "10.1021/acs.cgd.5b01459"
}

Radmilović, V., Kacher, J., Ivanović, E., Minor, A. M.,& Radmilović, V. R.. (2016). Multiple Twinning and Stacking Faults in Silver Dendrites. in Crystal Growth & Design
Amer Chemical Soc, Washington., 16(1), 467-474.
https://doi.org/10.1021/acs.cgd.5b01459

Radmilović V, Kacher J, Ivanović E, Minor AM, Radmilović VR. Multiple Twinning and Stacking Faults in Silver Dendrites. in Crystal Growth & Design. 2016;16(1):467-474.
doi:10.1021/acs.cgd.5b01459 .

Radmilović, Vuk, Kacher, Josh, Ivanović, Evica, Minor, Andrew M., Radmilović, Velimir R., "Multiple Twinning and Stacking Faults in Silver Dendrites" in Crystal Growth & Design, 16, no. 1 (2016):467-474,
https://doi.org/10.1021/acs.cgd.5b01459 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Ivanović, Evica
AU  - Branković, Goran
AU  - Stevanović, Sanja
AU  - Živković, Predrag M.
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5806
AB  - Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope (SEM). It was found that the process of Pb nucleation from the concentrated electrolyte follows Scharifker model based on the 3D (three-dimensional) instantaneous nucleation with diffusion-controlled growth. The deviations of the obtained dependencies from the theoretical prediction for this model have been also discussed. Needle-like and fern-like dendrites, as well as crystals of irregular shape (precursors of dendrites) were formed in the diffusion controlled electrodeposition. The SEM analysis of these dendritic forms revealed their 2D (two-dimensional) growth. The size of needle-like dendrites was considerably larger than the size of both the fern-like dendrites and the irregular crystals. Although the electrodeposition process occurred inside the linear diffusion layer of the macroelectrode, the shape and size of dendrites were determined by the effect of local diffusion fields formed around tips (spherical diffusion) and top edges (cylindrical diffusion) of protrusions formed in the initial stage of the electrodeposition. The growth rates under the conditions of spherical and cylindrical diffusion control were mutually compared and a faster growth under the conditions of the spherical, in relation to the cylindrical diffusion, was proved. The effect of the current density distribution on formation of the final forms of Pb dendrites was also discussed.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
EP  - 148
SP  - 137
VL  - 739
DO  - 10.1016/j.jelechem.2014.12.020
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Ivanović, Evica and Branković, Goran and Stevanović, Sanja and Živković, Predrag M.",
year = "2015",
abstract = "Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope (SEM). It was found that the process of Pb nucleation from the concentrated electrolyte follows Scharifker model based on the 3D (three-dimensional) instantaneous nucleation with diffusion-controlled growth. The deviations of the obtained dependencies from the theoretical prediction for this model have been also discussed. Needle-like and fern-like dendrites, as well as crystals of irregular shape (precursors of dendrites) were formed in the diffusion controlled electrodeposition. The SEM analysis of these dendritic forms revealed their 2D (two-dimensional) growth. The size of needle-like dendrites was considerably larger than the size of both the fern-like dendrites and the irregular crystals. Although the electrodeposition process occurred inside the linear diffusion layer of the macroelectrode, the shape and size of dendrites were determined by the effect of local diffusion fields formed around tips (spherical diffusion) and top edges (cylindrical diffusion) of protrusions formed in the initial stage of the electrodeposition. The growth rates under the conditions of spherical and cylindrical diffusion control were mutually compared and a faster growth under the conditions of the spherical, in relation to the cylindrical diffusion, was proved. The effect of the current density distribution on formation of the final forms of Pb dendrites was also discussed.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte",
pages = "148-137",
volume = "739",
doi = "10.1016/j.jelechem.2014.12.020"
}

Nikolić, N. D., Popov, K. I., Ivanović, E., Branković, G., Stevanović, S.,& Živković, P. M.. (2015). The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte. in Journal of Electroanalytical Chemistry
Elsevier., 739, 137-148.
https://doi.org/10.1016/j.jelechem.2014.12.020

Nikolić ND, Popov KI, Ivanović E, Branković G, Stevanović S, Živković PM. The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte. in Journal of Electroanalytical Chemistry. 2015;739:137-148.
doi:10.1016/j.jelechem.2014.12.020 .

Nikolić, Nebojša D., Popov, Konstantin I., Ivanović, Evica, Branković, Goran, Stevanović, Sanja, Živković, Predrag M., "The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte" in Journal of Electroanalytical Chemistry, 739 (2015):137-148,
https://doi.org/10.1016/j.jelechem.2014.12.020 . .

TY  - JOUR
AU  - Ivanović, Evica
AU  - Nikolić, Nebojša D.
AU  - Radmilović, Velimir R.
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5783
AB  - Silver dendrites were prepared by electrochemical deposition. The structures of the Ag dendrites, the type of twins and their distribution were investigated by scanning electron microscopy (SEM), Z-contrast high angle annular dark field transmission electron microscopy (HAADF), and crystallographically sensitive orientation imaging microscopy (OIM). The results revealed that the silver dendrites were characterized by the presence of randomly distributed 180 degrees rotational twin domains. The broad surface of dendrites was of the {111} type. The directions of growth of the main dendrite stem and all branches were of the  LT 112> type.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Randomly oriented twin domains in electrodeposited silver dendrites
EP  - 113
IS  - 1
SP  - 107
VL  - 80
DO  - 10.2298/JSC140306045I
ER  - 

@article{
author = "Ivanović, Evica and Nikolić, Nebojša D. and Radmilović, Velimir R.",
year = "2015",
abstract = "Silver dendrites were prepared by electrochemical deposition. The structures of the Ag dendrites, the type of twins and their distribution were investigated by scanning electron microscopy (SEM), Z-contrast high angle annular dark field transmission electron microscopy (HAADF), and crystallographically sensitive orientation imaging microscopy (OIM). The results revealed that the silver dendrites were characterized by the presence of randomly distributed 180 degrees rotational twin domains. The broad surface of dendrites was of the {111} type. The directions of growth of the main dendrite stem and all branches were of the  LT 112> type.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Randomly oriented twin domains in electrodeposited silver dendrites",
pages = "113-107",
number = "1",
volume = "80",
doi = "10.2298/JSC140306045I"
}

Ivanović, E., Nikolić, N. D.,& Radmilović, V. R.. (2015). Randomly oriented twin domains in electrodeposited silver dendrites. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 80(1), 107-113.
https://doi.org/10.2298/JSC140306045I

Ivanović E, Nikolić ND, Radmilović VR. Randomly oriented twin domains in electrodeposited silver dendrites. in Journal of the Serbian Chemical Society. 2015;80(1):107-113.
doi:10.2298/JSC140306045I .

Ivanović, Evica, Nikolić, Nebojša D., Radmilović, Velimir R., "Randomly oriented twin domains in electrodeposited silver dendrites" in Journal of the Serbian Chemical Society, 80, no. 1 (2015):107-113,
https://doi.org/10.2298/JSC140306045I . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Ivanović, Evica
AU  - Branković, Goran
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5770
AB  - The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of electrodeposition strongly affected the final morphology of the Pb crystals. The formation of Pb crystals of the different shape from the same initial shape was discussed in terms of the effect of orientation of initially formed grains on the type of diffusion control. A spherical diffusion layer was formed around the tip of the hexagonal-shaped grain oriented with its tip towards the bulk solution that led to the formation of elongated crystals in the growth process. On the other hand, a cylindrical type of diffusion was responsible for the growth of hexagonal-shaped grains oriented with the lateral side towards the bulk solution. Pb crystals with well-defined sides parallel to the surface area of the macroelectrode were formed under this type of diffusion.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
EP  - 1005
IS  - 8
SP  - 993
VL  - 79
DO  - 10.2298/JSC131211006N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Ivanović, Evica and Branković, Goran",
year = "2014",
abstract = "The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of electrodeposition strongly affected the final morphology of the Pb crystals. The formation of Pb crystals of the different shape from the same initial shape was discussed in terms of the effect of orientation of initially formed grains on the type of diffusion control. A spherical diffusion layer was formed around the tip of the hexagonal-shaped grain oriented with its tip towards the bulk solution that led to the formation of elongated crystals in the growth process. On the other hand, a cylindrical type of diffusion was responsible for the growth of hexagonal-shaped grains oriented with the lateral side towards the bulk solution. Pb crystals with well-defined sides parallel to the surface area of the macroelectrode were formed under this type of diffusion.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead",
pages = "1005-993",
number = "8",
volume = "79",
doi = "10.2298/JSC131211006N"
}

Nikolić, N. D., Popov, K. I., Ivanović, E.,& Branković, G.. (2014). Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 79(8), 993-1005.
https://doi.org/10.2298/JSC131211006N

Nikolić ND, Popov KI, Ivanović E, Branković G. Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead. in Journal of the Serbian Chemical Society. 2014;79(8):993-1005.
doi:10.2298/JSC131211006N .

Nikolić, Nebojša D., Popov, Konstantin I., Ivanović, Evica, Branković, Goran, "Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead" in Journal of the Serbian Chemical Society, 79, no. 8 (2014):993-1005,
https://doi.org/10.2298/JSC131211006N . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2004
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5417
AB  - The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes.
AB  - Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current
T1  - Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom
EP  - 51
IS  - 1
SP  - 43
VL  - 69
DO  - 10.2298/JSC0401043P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2004",
abstract = "The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes., Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current, Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom",
pages = "51-43",
number = "1",
volume = "69",
doi = "10.2298/JSC0401043P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(1), 43-51.
https://doi.org/10.2298/JSC0401043P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society. 2004;69(1):43-51.
doi:10.2298/JSC0401043P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current" in Journal of the Serbian Chemical Society, 69, no. 1 (2004):43-51,
https://doi.org/10.2298/JSC0401043P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5389
AB  - One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.
AB  - Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha
EP  - 778
IS  - 10
SP  - 771
VL  - 68
DO  - 10.2298/JSC0310771P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2003",
abstract = "One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed., Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha",
pages = "778-771",
number = "10",
volume = "68",
doi = "10.2298/JSC0310771P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2003). The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 771-778.
https://doi.org/10.2298/JSC0310771P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):771-778.
doi:10.2298/JSC0310771P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):771-778,
https://doi.org/10.2298/JSC0310771P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5388
AB  - An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles.
AB  - Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha
EP  - 783
IS  - 10
SP  - 779
VL  - 68
DO  - 10.2298/JSC0310779P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica and Krstić, Snežana B. and Obradović, Milutin Č.",
year = "2003",
abstract = "An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles., Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha",
pages = "783-779",
number = "10",
volume = "68",
doi = "10.2298/JSC0310779P"
}

Popov, K. I., Pavlović, M., Pavlović, L., Ivanović, E., Krstić, S. B.,& Obradović, M. Č.. (2003). The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 779-783.
https://doi.org/10.2298/JSC0310779P

Popov KI, Pavlović M, Pavlović L, Ivanović E, Krstić SB, Obradović MČ. The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):779-783.
doi:10.2298/JSC0310779P .

Popov, Konstantin I., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, Krstić, Snežana B., Obradović, Milutin Č., "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):779-783,
https://doi.org/10.2298/JSC0310779P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Radmilović, Velimir R.
AU  - Pavlović, Miomir
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5378
AB  - The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by changing shape of the reversing current wave and, hence, the apparent density of powders. The relation of apparent density with particle morphology and structure was illustrated.
AB  - U radu je pokazana mogućnost dobijanja bakarnih prahova različitih nasipnih masa promenom oblika talasa reversne struje. Uspostavljena je zadovoljavajuća veza između morfologije i strukture čestica praha bakra i nasipne mase praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of reversing current deposition on the apparent density of electrolytic copper powder
T1  - Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha
EP  - 67
IS  - 1
SP  - 61
VL  - 67
DO  - 10.2298/JSC0201061P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Ljubica and Ivanović, Evica and Radmilović, Velimir R. and Pavlović, Miomir",
year = "2002",
abstract = "The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by changing shape of the reversing current wave and, hence, the apparent density of powders. The relation of apparent density with particle morphology and structure was illustrated., U radu je pokazana mogućnost dobijanja bakarnih prahova različitih nasipnih masa promenom oblika talasa reversne struje. Uspostavljena je zadovoljavajuća veza između morfologije i strukture čestica praha bakra i nasipne mase praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of reversing current deposition on the apparent density of electrolytic copper powder, Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha",
pages = "67-61",
number = "1",
volume = "67",
doi = "10.2298/JSC0201061P"
}

Popov, K. I., Pavlović, L., Ivanović, E., Radmilović, V. R.,& Pavlović, M.. (2002). The effect of reversing current deposition on the apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(1), 61-67.
https://doi.org/10.2298/JSC0201061P

Popov KI, Pavlović L, Ivanović E, Radmilović VR, Pavlović M. The effect of reversing current deposition on the apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society. 2002;67(1):61-67.
doi:10.2298/JSC0201061P .

Popov, Konstantin I., Pavlović, Ljubica, Ivanović, Evica, Radmilović, Velimir R., Pavlović, Miomir, "The effect of reversing current deposition on the apparent density of electrolytic copper powder" in Journal of the Serbian Chemical Society, 67, no. 1 (2002):61-67,
https://doi.org/10.2298/JSC0201061P . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Pavlović, Lj.J.
AU  - Ivanović, Evica
AU  - Radmilović, V.
AU  - Popov, Konstantin I.
PY  - 2001
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5354
AB  - The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder.
AB  - Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of particle structure on apparent density of electrolytic copper powder
T1  - Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha
EP  - 933
IS  - 11-12
SP  - 923
VL  - 66
DO  - 10.2298/jsc0112923p
UR  - https://hdl.handle.net/21.15107/rcub_cer_28
ER  - 

@article{
author = "Pavlović, Miomir and Pavlović, Lj.J. and Ivanović, Evica and Radmilović, V. and Popov, Konstantin I.",
year = "2001",
abstract = "The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder., Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of particle structure on apparent density of electrolytic copper powder, Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha",
pages = "933-923",
number = "11-12",
volume = "66",
doi = "10.2298/jsc0112923p",
url = "https://hdl.handle.net/21.15107/rcub_cer_28"
}

Pavlović, M., Pavlović, Lj.J., Ivanović, E., Radmilović, V.,& Popov, K. I.. (2001). The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 66(11-12), 923-933.
https://doi.org/10.2298/jsc0112923p
https://hdl.handle.net/21.15107/rcub_cer_28

Pavlović M, Pavlović L, Ivanović E, Radmilović V, Popov KI. The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society. 2001;66(11-12):923-933.
doi:10.2298/jsc0112923p
https://hdl.handle.net/21.15107/rcub_cer_28 .

Pavlović, Miomir, Pavlović, Lj.J., Ivanović, Evica, Radmilović, V., Popov, Konstantin I., "The effect of particle structure on apparent density of electrolytic copper powder" in Journal of the Serbian Chemical Society, 66, no. 11-12 (2001):923-933,
https://doi.org/10.2298/jsc0112923p .,
https://hdl.handle.net/21.15107/rcub_cer_28 .