TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6939
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w . .

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Đokić, Veljko
AU  - Blagojević, Vladimir
AU  - Pavlović, Vera P.
AU  - Ćirković, Jovana
AU  - Horváth, Endre
AU  - Forró, László
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5921
AB  - In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.
PB  - MDPI
T2  - Catalysts
T1  - Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal
IS  - 2
SP  - 352
VL  - 13
DO  - 10.3390/catal13020352
ER  - 

@article{
author = "Vujančević, Jelena and Andričević, Pavao and Đokić, Veljko and Blagojević, Vladimir and Pavlović, Vera P. and Ćirković, Jovana and Horváth, Endre and Forró, László and Karoui, Abdennaceur and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2023",
abstract = "In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.",
publisher = "MDPI",
journal = "Catalysts",
title = "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal",
number = "2",
pages = "352",
volume = "13",
doi = "10.3390/catal13020352"
}

Vujančević, J., Andričević, P., Đokić, V., Blagojević, V., Pavlović, V. P., Ćirković, J., Horváth, E., Forró, L., Karoui, A., Pavlović, V. B.,& Janaćković, Đ.. (2023). Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts
MDPI., 13(2), 352.
https://doi.org/10.3390/catal13020352

Vujančević J, Andričević P, Đokić V, Blagojević V, Pavlović VP, Ćirković J, Horváth E, Forró L, Karoui A, Pavlović VB, Janaćković Đ. Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts. 2023;13(2):352.
doi:10.3390/catal13020352 .

Vujančević, Jelena, Andričević, Pavao, Đokić, Veljko, Blagojević, Vladimir, Pavlović, Vera P., Ćirković, Jovana, Horváth, Endre, Forró, László, Karoui, Abdennaceur, Pavlović, Vladimir B., Janaćković, Đorđe, "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal" in Catalysts, 13, no. 2 (2023):352,
https://doi.org/10.3390/catal13020352 . .

TY  - JOUR
AU  - Salih, Rabab
AU  - Veličković, Zlate
AU  - Milošević, Milena
AU  - Pavlović, Vera P.
AU  - Cvijetić, Ilija
AU  - Sofrenić, Ivana V.
AU  - Gržetić, Jelena D.
AU  - Marinković, Aleksandar
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5275
AB  - Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (KfL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of KfL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m2 g−1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g−1 for MG, 86.8 mg g−1 for T, and 68.6 mg g−1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO3H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.
PB  - Academic Press
T2  - Journal of Environmental Management
T1  - Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study
SP  - 116838
VL  - 326
DO  - 10.1016/j.jenvman.2022.116838
ER  - 

@article{
author = "Salih, Rabab and Veličković, Zlate and Milošević, Milena and Pavlović, Vera P. and Cvijetić, Ilija and Sofrenić, Ivana V. and Gržetić, Jelena D. and Marinković, Aleksandar",
year = "2023",
abstract = "Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (KfL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of KfL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m2 g−1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g−1 for MG, 86.8 mg g−1 for T, and 68.6 mg g−1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO3H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.",
publisher = "Academic Press",
journal = "Journal of Environmental Management",
title = "Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study",
pages = "116838",
volume = "326",
doi = "10.1016/j.jenvman.2022.116838"
}

Salih, R., Veličković, Z., Milošević, M., Pavlović, V. P., Cvijetić, I., Sofrenić, I. V., Gržetić, J. D.,& Marinković, A.. (2023). Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study. in Journal of Environmental Management
Academic Press., 326, 116838.
https://doi.org/10.1016/j.jenvman.2022.116838

Salih R, Veličković Z, Milošević M, Pavlović VP, Cvijetić I, Sofrenić IV, Gržetić JD, Marinković A. Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study. in Journal of Environmental Management. 2023;326:116838.
doi:10.1016/j.jenvman.2022.116838 .

Salih, Rabab, Veličković, Zlate, Milošević, Milena, Pavlović, Vera P., Cvijetić, Ilija, Sofrenić, Ivana V., Gržetić, Jelena D., Marinković, Aleksandar, "Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study" in Journal of Environmental Management, 326 (2023):116838,
https://doi.org/10.1016/j.jenvman.2022.116838 . .

TY  - JOUR
AU  - Ivanović, Marija
AU  - Nenadović, Snežana S.
AU  - Pavlović, Vera P.
AU  - Radović, Ivona R.
AU  - Kijevčanin, Mirjana Lj.
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana M.
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5121
AB  - Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. Mixtures of Na2SiO3and NaOH of different molar concentrations (from 2M to 8M with step 2) were used as an alkaline activator. The sample with the highest NaOH concentrationalso shows the highest values of all thermodynamic parameters.Metakaolin, obtained by calcination of kaolin at 750 °C, was used as the starting material.The samples were characterized by X-ray diffraction (XRD),FTIR and Raman spectroscopy, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray (EDX) Spectroscopy. Results of FTIR analysis correlated with results of Raman Spectroscopy. Due to the polymerization process, the changes in the phonon spectrum were confirmed. The different concentra-tions of activators do not notably change the Si/Al ratio.
T2  - Macedonian Journal of Chemistry and Chemical Engineering
T1  - The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers
IS  - 1
SP  - 99
VL  - 40
DO  - 10.20450/mjcce.2021.2127
ER  - 

@article{
author = "Ivanović, Marija and Nenadović, Snežana S. and Pavlović, Vera P. and Radović, Ivona R. and Kijevčanin, Mirjana Lj. and Pavlović, Vladimir B. and Kljajević, Ljiljana M.",
year = "2021",
abstract = "Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. Mixtures of Na2SiO3and NaOH of different molar concentrations (from 2M to 8M with step 2) were used as an alkaline activator. The sample with the highest NaOH concentrationalso shows the highest values of all thermodynamic parameters.Metakaolin, obtained by calcination of kaolin at 750 °C, was used as the starting material.The samples were characterized by X-ray diffraction (XRD),FTIR and Raman spectroscopy, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray (EDX) Spectroscopy. Results of FTIR analysis correlated with results of Raman Spectroscopy. Due to the polymerization process, the changes in the phonon spectrum were confirmed. The different concentra-tions of activators do not notably change the Si/Al ratio.",
journal = "Macedonian Journal of Chemistry and Chemical Engineering",
title = "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers",
number = "1",
pages = "99",
volume = "40",
doi = "10.20450/mjcce.2021.2127"
}

Ivanović, M., Nenadović, S. S., Pavlović, V. P., Radović, I. R., Kijevčanin, M. Lj., Pavlović, V. B.,& Kljajević, L. M.. (2021). The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers. in Macedonian Journal of Chemistry and Chemical Engineering, 40(1), 99.
https://doi.org/10.20450/mjcce.2021.2127

Ivanović M, Nenadović SS, Pavlović VP, Radović IR, Kijevčanin ML, Pavlović VB, Kljajević LM. The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers. in Macedonian Journal of Chemistry and Chemical Engineering. 2021;40(1):99.
doi:10.20450/mjcce.2021.2127 .

Ivanović, Marija, Nenadović, Snežana S., Pavlović, Vera P., Radović, Ivona R., Kijevčanin, Mirjana Lj., Pavlović, Vladimir B., Kljajević, Ljiljana M., "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers" in Macedonian Journal of Chemistry and Chemical Engineering, 40, no. 1 (2021):99,
https://doi.org/10.20450/mjcce.2021.2127 . .

TY  - JOUR
AU  - Popović, Ana L.
AU  - Rusmirović, Jelena
AU  - Veličković, Zlate
AU  - Radovanović, Željko
AU  - Ristić, Mirjana
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4540
AB  - Novel highly effective amino-functionalized lignin-based biosorbent in the microsphere geometry (A-LMS) for removal of heavy metal ions, was synthesized via inverse suspension copolymerization of kraft lignin with poly(ethylene imine) grafting-agent and epoxy chloropropane cross-linker. Optimization of A-LMS synthesis, performed with respect to the quantity of sodium alginate emulsifier (1, 5 and 10 wt%), provides highly porous microspheres A-LMS_5, using 5 wt% emulsifier, with 800 +/- 80 mu m diameter, 7.68 m(2) g(-1) surface area and 7.7 mmol g(-1) of terminal amino groups. Structural and surface characteristics were obtained from Brunauer-Emmett-Teller method, Fourier Transform-Infrared spectroscopy, scanning electron microscopy, X-ray photo-electron spectroscopy and porosity determination. In a batch test, the influence of pH, A-LMS_5 dose, temperature, contact time on adsorption efficiency of Ni2+, Cd2+, As(V) and Cr(VI) ions were studied. The adsorption is spontaneous and feasible with maximum adsorption capacity of 74.84, 54.20, 53.12 and 49.42 mg g(-1) for Cd2+, Cr(VI), As(V) and Ni2+ ions, respectively, obtained by using Langmuir model. Modeling of kinetic data indicated fast adsorbate removal rate with pore diffusional transport as rate limiting step (pseudo-second order model and Weber-Morris equations), thus further confirming high performances of produced bio-adsorbent for heavy metal ions removal.
PB  - Elsevier, Amsterdam
T2  - International Journal of Biological Macromolecules
T1  - Novel amino-functionalized lignin microspheres: High performance biosorbent with enhanced capacity for heavy metal ion removal
EP  - 1173
SP  - 1160
VL  - 156
DO  - 10.1016/j.ijbiomac.2019.11.152
ER  - 

@article{
author = "Popović, Ana L. and Rusmirović, Jelena and Veličković, Zlate and Radovanović, Željko and Ristić, Mirjana and Pavlović, Vera P. and Marinković, Aleksandar",
year = "2020",
abstract = "Novel highly effective amino-functionalized lignin-based biosorbent in the microsphere geometry (A-LMS) for removal of heavy metal ions, was synthesized via inverse suspension copolymerization of kraft lignin with poly(ethylene imine) grafting-agent and epoxy chloropropane cross-linker. Optimization of A-LMS synthesis, performed with respect to the quantity of sodium alginate emulsifier (1, 5 and 10 wt%), provides highly porous microspheres A-LMS_5, using 5 wt% emulsifier, with 800 +/- 80 mu m diameter, 7.68 m(2) g(-1) surface area and 7.7 mmol g(-1) of terminal amino groups. Structural and surface characteristics were obtained from Brunauer-Emmett-Teller method, Fourier Transform-Infrared spectroscopy, scanning electron microscopy, X-ray photo-electron spectroscopy and porosity determination. In a batch test, the influence of pH, A-LMS_5 dose, temperature, contact time on adsorption efficiency of Ni2+, Cd2+, As(V) and Cr(VI) ions were studied. The adsorption is spontaneous and feasible with maximum adsorption capacity of 74.84, 54.20, 53.12 and 49.42 mg g(-1) for Cd2+, Cr(VI), As(V) and Ni2+ ions, respectively, obtained by using Langmuir model. Modeling of kinetic data indicated fast adsorbate removal rate with pore diffusional transport as rate limiting step (pseudo-second order model and Weber-Morris equations), thus further confirming high performances of produced bio-adsorbent for heavy metal ions removal.",
publisher = "Elsevier, Amsterdam",
journal = "International Journal of Biological Macromolecules",
title = "Novel amino-functionalized lignin microspheres: High performance biosorbent with enhanced capacity for heavy metal ion removal",
pages = "1173-1160",
volume = "156",
doi = "10.1016/j.ijbiomac.2019.11.152"
}

Popović, A. L., Rusmirović, J., Veličković, Z., Radovanović, Ž., Ristić, M., Pavlović, V. P.,& Marinković, A.. (2020). Novel amino-functionalized lignin microspheres: High performance biosorbent with enhanced capacity for heavy metal ion removal. in International Journal of Biological Macromolecules
Elsevier, Amsterdam., 156, 1160-1173.
https://doi.org/10.1016/j.ijbiomac.2019.11.152

Popović AL, Rusmirović J, Veličković Z, Radovanović Ž, Ristić M, Pavlović VP, Marinković A. Novel amino-functionalized lignin microspheres: High performance biosorbent with enhanced capacity for heavy metal ion removal. in International Journal of Biological Macromolecules. 2020;156:1160-1173.
doi:10.1016/j.ijbiomac.2019.11.152 .

Popović, Ana L., Rusmirović, Jelena, Veličković, Zlate, Radovanović, Željko, Ristić, Mirjana, Pavlović, Vera P., Marinković, Aleksandar, "Novel amino-functionalized lignin microspheres: High performance biosorbent with enhanced capacity for heavy metal ion removal" in International Journal of Biological Macromolecules, 156 (2020):1160-1173,
https://doi.org/10.1016/j.ijbiomac.2019.11.152 . .

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Horvath, Endre
AU  - Kollar, Marton
AU  - Nafradi, Balint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forro, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4251
AB  - Highly ordered, anodically grown TiO2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping ( lt = 2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 +/- 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO2/CH3NH3PbI3 single crystals. The N-TiO2/perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
EP  - 10020
IS  - 8
SP  - 10013
VL  - 45
DO  - 10.1016/j.ceramint.2019.02.045
ER  - 

@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko Lj. and Horvath, Endre and Kollar, Marton and Nafradi, Balint and Schiller, Andreas and Domanski, Konrad and Forro, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Highly ordered, anodically grown TiO2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping ( lt = 2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 +/- 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO2/CH3NH3PbI3 single crystals. The N-TiO2/perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
pages = "10020-10013",
number = "8",
volume = "45",
doi = "10.1016/j.ceramint.2019.02.045"
}

Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z. Lj., Horvath, E., Kollar, M., Nafradi, B., Schiller, A., Domanski, K., Forro, L., Pavlović, V. P.,& Janaćković, Đ.. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. in Ceramics International
Elsevier Sci Ltd, Oxford., 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045

Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević ZL, Horvath E, Kollar M, Nafradi B, Schiller A, Domanski K, Forro L, Pavlović VP, Janaćković Đ. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. in Ceramics International. 2019;45(8):10013-10020.
doi:10.1016/j.ceramint.2019.02.045 .

Vujančević, Jelena, Andričević, Pavao, Bjelajac, Anđelika, Đokić, Veljko, Popović, Maja, Rakočević, Zlatko Lj., Horvath, Endre, Kollar, Marton, Nafradi, Balint, Schiller, Andreas, Domanski, Konrad, Forro, Laszlo, Pavlović, Vera P., Janaćković, Đorđe, "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" in Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 . .

TY  - DATA
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Horváth, Endre
AU  - Kollar, Marton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4163
AB  - Table S1. Reported methods for nitrogen doping of anodized TiO2 nanotube arrays; Figure S1. SEM images and statistical distributions of outer diameters obtained by analyzing SEM micrographs of 100 nanotubes; Table S2. Average morphology parameters for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S3. Average crystals size for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S2. Deconvoluted XPS spectra of N 1s core level of Ti foil (black line-experimental, grey line-background, magenta line-envelope); Table S4. Peak positions and atomic percentages of N1s core levels for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S5. Positions and atomic percentages of Ti 2p3/2 and O1s core peaks for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S3. The time evolution of the current during the preconditioning of the TiO2/perovskite sample at a bias voltage of 100 V for 75 sec. Dashed line is the logarithmic fit of the base line of the current time evolution; Figure S4. Ideality factor for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples
T2  - Ceramics International
T1  - Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5969
ER  - 

@misc{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko Lj. and Horváth, Endre and Kollar, Marton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Table S1. Reported methods for nitrogen doping of anodized TiO2 nanotube arrays; Figure S1. SEM images and statistical distributions of outer diameters obtained by analyzing SEM micrographs of 100 nanotubes; Table S2. Average morphology parameters for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S3. Average crystals size for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S2. Deconvoluted XPS spectra of N 1s core level of Ti foil (black line-experimental, grey line-background, magenta line-envelope); Table S4. Peak positions and atomic percentages of N1s core levels for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S5. Positions and atomic percentages of Ti 2p3/2 and O1s core peaks for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S3. The time evolution of the current during the preconditioning of the TiO2/perovskite sample at a bias voltage of 100 V for 75 sec. Dashed line is the logarithmic fit of the base line of the current time evolution; Figure S4. Ideality factor for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples",
journal = "Ceramics International",
title = "Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5969"
}

Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z. Lj., Horváth, E., Kollar, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ.. (2019). Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045. in Ceramics International.
https://hdl.handle.net/21.15107/rcub_dais_5969

Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević ZL, Horváth E, Kollar M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045. in Ceramics International. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5969 .

Vujančević, Jelena, Andričević, Pavao, Bjelajac, Anđelika, Đokić, Veljko, Popović, Maja, Rakočević, Zlatko Lj., Horváth, Endre, Kollar, Marton, Náfrádi, Bálint, Schiller, Andreas, Domanski, Konrad, Forró, Laszlo, Pavlović, Vera P., Janaćković, Đorđe, "Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045" in Ceramics International (2019),
https://hdl.handle.net/21.15107/rcub_dais_5969 .

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4223
AB  - Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL--APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mossbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456mgg(-1) for WL--APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382mgg(-1) for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL--APS/MG, e.g., 1.17-13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL--APS.
PB  - Springer Heidelberg, Heidelberg
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
EP  - 12398
IS  - 12
SP  - 12379
VL  - 26
DO  - 10.1007/s11356-019-04625-0
ER  - 

@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL--APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mossbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456mgg(-1) for WL--APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382mgg(-1) for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL--APS/MG, e.g., 1.17-13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL--APS.",
publisher = "Springer Heidelberg, Heidelberg",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12398-12379",
number = "12",
volume = "26",
doi = "10.1007/s11356-019-04625-0"
}

Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research
Springer Heidelberg, Heidelberg., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0

Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković A, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0 .

Rusmirović, Jelena, Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar, Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 . .

TY  - JOUR
AU  - Mladenović, Nataša N.
AU  - Ivanović, Marija M.
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Snežana S.
AU  - Gulicovski, Jelena
AU  - Pavlović, Vera P.
AU  - Trivunac, Katarina
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3806
AB  - Alumosilicate polymers (geopolymers) based on metakaolin as precursor and alkaline activators of different concentrations (2M, 4M, 6M and 8M NaOH/Na2SiO3) were used to remove ions of cadmium from wastewater. Experiments were carried out in a batch process at room temperature (23 ± 1 ° C) for different operating parameters: adsorption time, pH value of solution, initial concentration of metal and mass of adsorbents. It was found that the optimum pH value for all adsorbents is above 6.0. The adsorption efficiency increases with increasing pH of the solution. With an increase in the initial concentration of cadmium, the adsorption capacity increases and reaches a value of over 200.0 mg/g. The experimental results have better agreement with Freundlich's adsorption isotherm (surface heterogeneity, hemisorption mechanism) and the pseudo-second order model (the principle of the chemisorption mechanism and adsorption rate depend on the adsorbent concentration). Alumosilicate geopolymer samples were characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier-Transform Infrared Spectroscopy (FTIR).
AB  - Za uklanjanje jona kadmijuma iz otpadnih voda korišćeni su alumosilikatni polimeri (geopolimeri) na bazi metakaolina kao prekursora i alkalni aktivator različitih koncentracija (2M, 4M, 6M i 8M NaOH/ Na2SiO3). Eksperimenti su vršeni u šaržnom procesu na sobnoj temperaturi (23±1 °C) pri različitim radnim parametrima: vreme adsorpcije, pH vrednost rastvora, početna koncentracija metala i masa adsorbenata. Utvrđeno je da je optimalna pH vrednost za sve adsorbente iznad 6,0. Efikasnost adsorpcije raste sa porastom pH vrednosti rastvora. Sa povećanjem početne koncentracije kadmijuma raste adsorpcioni kapacitet i dostiže vrednost preko 200,0 mg/g. Ekperimentalni rezultati su pokazali dobro slaganje sa Freundlich-ovom adsorpcionom izotermom i modelom pseudo-drugog reda. Karakterizacija geopolimera urađena je pomoću rendgenske difrakcije (XRD), skenirajuće elektronske mikroskopije (SEM) i infracrvene spektroskopije sa Furijeovom transformacijom (FTIR).
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater
T1  - Primena alumosilikatnih polimera na bazi metakaolina u adsorpciji jona kadmijuma iz otpadnih voda
EP  - 756
IS  - 6
SP  - 749
VL  - 73
DO  - 10.5937/tehnika1806749M
ER  - 

@article{
author = "Mladenović, Nataša N. and Ivanović, Marija M. and Kljajević, Ljiljana M. and Nenadović, Snežana S. and Gulicovski, Jelena and Pavlović, Vera P. and Trivunac, Katarina",
year = "2018",
abstract = "Alumosilicate polymers (geopolymers) based on metakaolin as precursor and alkaline activators of different concentrations (2M, 4M, 6M and 8M NaOH/Na2SiO3) were used to remove ions of cadmium from wastewater. Experiments were carried out in a batch process at room temperature (23 ± 1 ° C) for different operating parameters: adsorption time, pH value of solution, initial concentration of metal and mass of adsorbents. It was found that the optimum pH value for all adsorbents is above 6.0. The adsorption efficiency increases with increasing pH of the solution. With an increase in the initial concentration of cadmium, the adsorption capacity increases and reaches a value of over 200.0 mg/g. The experimental results have better agreement with Freundlich's adsorption isotherm (surface heterogeneity, hemisorption mechanism) and the pseudo-second order model (the principle of the chemisorption mechanism and adsorption rate depend on the adsorbent concentration). Alumosilicate geopolymer samples were characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier-Transform Infrared Spectroscopy (FTIR)., Za uklanjanje jona kadmijuma iz otpadnih voda korišćeni su alumosilikatni polimeri (geopolimeri) na bazi metakaolina kao prekursora i alkalni aktivator različitih koncentracija (2M, 4M, 6M i 8M NaOH/ Na2SiO3). Eksperimenti su vršeni u šaržnom procesu na sobnoj temperaturi (23±1 °C) pri različitim radnim parametrima: vreme adsorpcije, pH vrednost rastvora, početna koncentracija metala i masa adsorbenata. Utvrđeno je da je optimalna pH vrednost za sve adsorbente iznad 6,0. Efikasnost adsorpcije raste sa porastom pH vrednosti rastvora. Sa povećanjem početne koncentracije kadmijuma raste adsorpcioni kapacitet i dostiže vrednost preko 200,0 mg/g. Ekperimentalni rezultati su pokazali dobro slaganje sa Freundlich-ovom adsorpcionom izotermom i modelom pseudo-drugog reda. Karakterizacija geopolimera urađena je pomoću rendgenske difrakcije (XRD), skenirajuće elektronske mikroskopije (SEM) i infracrvene spektroskopije sa Furijeovom transformacijom (FTIR).",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater, Primena alumosilikatnih polimera na bazi metakaolina u adsorpciji jona kadmijuma iz otpadnih voda",
pages = "756-749",
number = "6",
volume = "73",
doi = "10.5937/tehnika1806749M"
}

Mladenović, N. N., Ivanović, M. M., Kljajević, L. M., Nenadović, S. S., Gulicovski, J., Pavlović, V. P.,& Trivunac, K.. (2018). Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 73(6), 749-756.
https://doi.org/10.5937/tehnika1806749M

Mladenović NN, Ivanović MM, Kljajević LM, Nenadović SS, Gulicovski J, Pavlović VP, Trivunac K. Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater. in Tehnika. 2018;73(6):749-756.
doi:10.5937/tehnika1806749M .

Mladenović, Nataša N., Ivanović, Marija M., Kljajević, Ljiljana M., Nenadović, Snežana S., Gulicovski, Jelena, Pavlović, Vera P., Trivunac, Katarina, "Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater" in Tehnika, 73, no. 6 (2018):749-756,
https://doi.org/10.5937/tehnika1806749M . .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3767
AB  - Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and
T1  - Customizing nanotubular titania for photocatalytic activity
EP  - 77
SP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3767
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and",
title = "Customizing nanotubular titania for photocatalytic activity",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3767"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Janaćković, Đ.,& Pavlović, V. B.. (2018). Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and
Belgrade : Institute of Technical Sciences of SASA., 77-77.
https://hdl.handle.net/21.15107/rcub_technorep_3767

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Janaćković Đ, Pavlović VB. Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and. 2018;:77-77.
https://hdl.handle.net/21.15107/rcub_technorep_3767 .

Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horváth, Endre, Forró, László, Janaćković, Đorđe, Pavlović, Vladimir B., "Customizing nanotubular titania for photocatalytic activity" in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and (2018):77-77,
https://hdl.handle.net/21.15107/rcub_technorep_3767 .

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horvath, Endre
AU  - Forro, Laszlo
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4032
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
EP  - 50
IS  - 1
SP  - 39
VL  - 50
DO  - 10.2298/SOS1801039V
ER  - 

@article{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forro, Laszlo and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
pages = "50-39",
number = "1",
volume = "50",
doi = "10.2298/SOS1801039V"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forro, L., Vlahović, B., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forro L, Vlahović B, Mitrić M, Janaćković Đ, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering. 2018;50(1):39-50.
doi:10.2298/SOS1801039V .

Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horvath, Endre, Forro, Laszlo, Vlahović, Branislav, Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" in Science of Sintering, 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V . .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3479
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-2
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - 44
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3479
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-2",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3479"
}

Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V. B.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-2
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., 44-44.
https://hdl.handle.net/21.15107/rcub_technorep_3479

Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović VB. Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-2. 2017;:44-44.
https://hdl.handle.net/21.15107/rcub_technorep_3479 .

Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir B., "Fabrication and applications of multifunctional nanostructured TiO2" in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-2 (2017):44-44,
https://hdl.handle.net/21.15107/rcub_technorep_3479 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3487
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Proceedings / The Third International Symposium on Agricultural Engineering, ISAE-2017, October, 20t
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - VII - 18
SP  - VII - 10
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3487
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Proceedings / The Third International Symposium on Agricultural Engineering, ISAE-2017, October, 20t",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "VII - 18-VII - 10",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3487"
}

Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V. B.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Proceedings / The Third International Symposium on Agricultural Engineering, ISAE-2017, October, 20t
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., VII - 10-VII - 18.
https://hdl.handle.net/21.15107/rcub_technorep_3487

Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović VB. Fabrication and applications of multifunctional nanostructured TiO2. in Proceedings / The Third International Symposium on Agricultural Engineering, ISAE-2017, October, 20t. 2017;:VII - 10-VII - 18.
https://hdl.handle.net/21.15107/rcub_technorep_3487 .

Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir B., "Fabrication and applications of multifunctional nanostructured TiO2" in Proceedings / The Third International Symposium on Agricultural Engineering, ISAE-2017, October, 20t (2017):VII - 10-VII - 18,
https://hdl.handle.net/21.15107/rcub_technorep_3487 .

TY  - JOUR
AU  - Brković, Danijela V.
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Obradović, Nina
AU  - Mitrić, Miodrag
AU  - Stevanović, Sanja
AU  - Vlahović, Branislav
AU  - Uskoković, Petar
AU  - Marinković, Aleksandar
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3550
AB  - The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. Different functional groups have been covalently attached on the MWCNTs sidewalls in order to induce interfacial interactions at nanofiller/polymer interface, which resulted in an improved nanomechanical features. Structural properties of nanocomposites, studied with XRD and Raman analysis, indicated the most pronounced decrease in a degree of amorphousness for samples containing 0.5 and 1 wt% of MWCNTs functionalized with dapsone (dapson-MWCNT) and diethyl malonate (dem-MWCNT). SEM and TEM micrographs confirmed improved dispersibility of the MWCNTs modified with aromatic structure of dapsone inside PMMA matrix. A significant increase in a glass transition temperature of over 60 degrees C has been found for the 1 wt% dapson-MWCNT nanocomposite. Additional modification of dapson-MWCNT by further increasing aromaticity and voluminosity of attached moiety (fid-MWCNT), showed 30 degrees C increases in a glass transition temperature at 4 wt% of nanofiller loading, which is similar to shift of 37 degrees C with loading of MWCNTs modified with ester terminal group. A maximum increase of 56% of reduced modulus and 86% of hardness was obtained for 1 wt% loading of dapson-MWCNT nanofiller.
PB  - Wiley, Hoboken
T2  - Polymer Composites
T1  - Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization
EP  - E489
SP  - E472
VL  - 38
DO  - 10.1002/pc.23996
ER  - 

@article{
author = "Brković, Danijela V. and Pavlović, Vladimir B. and Pavlović, Vera P. and Obradović, Nina and Mitrić, Miodrag and Stevanović, Sanja and Vlahović, Branislav and Uskoković, Petar and Marinković, Aleksandar",
year = "2017",
abstract = "The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. Different functional groups have been covalently attached on the MWCNTs sidewalls in order to induce interfacial interactions at nanofiller/polymer interface, which resulted in an improved nanomechanical features. Structural properties of nanocomposites, studied with XRD and Raman analysis, indicated the most pronounced decrease in a degree of amorphousness for samples containing 0.5 and 1 wt% of MWCNTs functionalized with dapsone (dapson-MWCNT) and diethyl malonate (dem-MWCNT). SEM and TEM micrographs confirmed improved dispersibility of the MWCNTs modified with aromatic structure of dapsone inside PMMA matrix. A significant increase in a glass transition temperature of over 60 degrees C has been found for the 1 wt% dapson-MWCNT nanocomposite. Additional modification of dapson-MWCNT by further increasing aromaticity and voluminosity of attached moiety (fid-MWCNT), showed 30 degrees C increases in a glass transition temperature at 4 wt% of nanofiller loading, which is similar to shift of 37 degrees C with loading of MWCNTs modified with ester terminal group. A maximum increase of 56% of reduced modulus and 86% of hardness was obtained for 1 wt% loading of dapson-MWCNT nanofiller.",
publisher = "Wiley, Hoboken",
journal = "Polymer Composites",
title = "Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization",
pages = "E489-E472",
volume = "38",
doi = "10.1002/pc.23996"
}

Brković, D. V., Pavlović, V. B., Pavlović, V. P., Obradović, N., Mitrić, M., Stevanović, S., Vlahović, B., Uskoković, P.,& Marinković, A.. (2017). Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization. in Polymer Composites
Wiley, Hoboken., 38, E472-E489.
https://doi.org/10.1002/pc.23996

Brković DV, Pavlović VB, Pavlović VP, Obradović N, Mitrić M, Stevanović S, Vlahović B, Uskoković P, Marinković A. Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization. in Polymer Composites. 2017;38:E472-E489.
doi:10.1002/pc.23996 .

Brković, Danijela V., Pavlović, Vladimir B., Pavlović, Vera P., Obradović, Nina, Mitrić, Miodrag, Stevanović, Sanja, Vlahović, Branislav, Uskoković, Petar, Marinković, Aleksandar, "Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization" in Polymer Composites, 38 (2017):E472-E489,
https://doi.org/10.1002/pc.23996 . .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2870
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
EP  - 18
SP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7545
ER  - 

@conference{
author = "Vujančević, Jelena and Đokić, Veljko and Bjelajac, Anđelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2015",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7545"
}

Vujančević, J., Đokić, V., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and
Belgrade : Institute of Technical Sciences of SASA., 18-18.
https://hdl.handle.net/21.15107/rcub_vinar_7545

Vujančević J, Đokić V, Bjelajac A, Pavlović VP, Mitrić M, Janaćković Đ, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and. 2015;:18-18.
https://hdl.handle.net/21.15107/rcub_vinar_7545 .

Vujančević, Jelena, Đokić, Veljko, Bjelajac, Anđelika, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and (2015):18-18,
https://hdl.handle.net/21.15107/rcub_vinar_7545 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2864
AB  - The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing
T1  - Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
EP  - 81
SP  - 81
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7527
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Obradović, Nina and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Rašić, Goran and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2015",
abstract = "The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing",
title = "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures",
pages = "81-81",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7527"
}

Vujančević, J., Bjelajac, A., Obradović, N., Pavlović, V. P., Mitrić, M., Janaćković, Đ., Rašić, G., Vlahović, B.,& Pavlović, V. B.. (2015). Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing
Belgrade : Serbian Ceramic Society., 81-81.
https://hdl.handle.net/21.15107/rcub_vinar_7527

Vujančević J, Bjelajac A, Obradović N, Pavlović VP, Mitrić M, Janaćković Đ, Rašić G, Vlahović B, Pavlović VB. Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing. 2015;:81-81.
https://hdl.handle.net/21.15107/rcub_vinar_7527 .

Vujančević, Jelena, Bjelajac, Anđelika, Obradović, Nina, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Rašić, Goran, Vlahović, Branislav, Pavlović, Vladimir B., "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing (2015):81-81,
https://hdl.handle.net/21.15107/rcub_vinar_7527 .

TY  - CONF
AU  - Brković, Danijela V.
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Obradović, Nina
AU  - Uskoković, Petar S.
AU  - Marinković, Aleksandar
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5207
AB  - In this study, we have performed functionalization of graphene nanoplatelets (GNPs) via Bingel reaction and investigated influence on the addition of covalently functionalized GPNs on the structural changes of the poly(methyl methacrylate). Preparation of poly(methyl methacrylate) nanocomposites with functionalized GNPs has been accomplished by drop casting method of dissolved PMMA mixed with modified graphene nanoplatelets dispersed in a N-methyl-1-pyrrolidone. Functionalizaton of graphene has been achieved under the conditions of Bingel reaction, which implies introduction of diethyl malonate on the graphene surfaces through the cyclopropane ring formation. Introduction of the cyclopropane ring on to the surface of graphene does not significantly affect the initial structural properties of graphene nanoplatelets, allowing better dispersible properties due to interaction of covalently attached diethyl malonate groups with the polymer chains. Fourier transform infrared spectroscopy (FTIR) and elemental analysis confirmed the effectiveness of the addition of diethyl malonate via Bingel reaction on the surface of GNPs. Scanning electron microscopy (SEM) has been used to provide information on the morphology of functionalized GNPs. Prepared nanocomposites have been characterized by Raman and FTIR spectroscopy. The changes regarding glass transition temperature have been monitored with differential scanning calorimetry (DSC).
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
T1  - Functionalization of graphene nanoplatelets via Bingel reaction for polymer nanocomposites
SP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_dais_427
ER  - 

@conference{
author = "Brković, Danijela V. and Pavlović, Vladimir B. and Pavlović, Vera P. and Obradović, Nina and Uskoković, Petar S. and Marinković, Aleksandar",
year = "2013",
abstract = "In this study, we have performed functionalization of graphene nanoplatelets (GNPs) via Bingel reaction and investigated influence on the addition of covalently functionalized GPNs on the structural changes of the poly(methyl methacrylate). Preparation of poly(methyl methacrylate) nanocomposites with functionalized GNPs has been accomplished by drop casting method of dissolved PMMA mixed with modified graphene nanoplatelets dispersed in a N-methyl-1-pyrrolidone. Functionalizaton of graphene has been achieved under the conditions of Bingel reaction, which implies introduction of diethyl malonate on the graphene surfaces through the cyclopropane ring formation. Introduction of the cyclopropane ring on to the surface of graphene does not significantly affect the initial structural properties of graphene nanoplatelets, allowing better dispersible properties due to interaction of covalently attached diethyl malonate groups with the polymer chains. Fourier transform infrared spectroscopy (FTIR) and elemental analysis confirmed the effectiveness of the addition of diethyl malonate via Bingel reaction on the surface of GNPs. Scanning electron microscopy (SEM) has been used to provide information on the morphology of functionalized GNPs. Prepared nanocomposites have been characterized by Raman and FTIR spectroscopy. The changes regarding glass transition temperature have been monitored with differential scanning calorimetry (DSC).",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade",
title = "Functionalization of graphene nanoplatelets via Bingel reaction for polymer nanocomposites",
pages = "49",
url = "https://hdl.handle.net/21.15107/rcub_dais_427"
}

Brković, D. V., Pavlović, V. B., Pavlović, V. P., Obradović, N., Uskoković, P. S.,& Marinković, A.. (2013). Functionalization of graphene nanoplatelets via Bingel reaction for polymer nanocomposites. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
Belgrade : Serbian Ceramic Society., 49.
https://hdl.handle.net/21.15107/rcub_dais_427

Brković DV, Pavlović VB, Pavlović VP, Obradović N, Uskoković PS, Marinković A. Functionalization of graphene nanoplatelets via Bingel reaction for polymer nanocomposites. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade. 2013;:49.
https://hdl.handle.net/21.15107/rcub_dais_427 .

Brković, Danijela V., Pavlović, Vladimir B., Pavlović, Vera P., Obradović, Nina, Uskoković, Petar S., Marinković, Aleksandar, "Functionalization of graphene nanoplatelets via Bingel reaction for polymer nanocomposites" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade (2013):49,
https://hdl.handle.net/21.15107/rcub_dais_427 .