TY  - JOUR
AU  - Sahoo, Sarata Kumar
AU  - Žunić, Zora S.
AU  - Veerasamy, Nimelan
AU  - Natarajan, Thennaarassan
AU  - Zhukovsky, Michael
AU  - Jovanović, Peter
AU  - Veselinović, Nenad
AU  - Janićijević, Aco
AU  - Onischenko, Aleksandra
AU  - Yarmoshenko, Ilia
AU  - Ramola, Rakesh C.
PY  - 2024
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6581
AB  - The activity concentrations of 226Ra, 232Th and 40K were determined in 43 soil samples collected from 0 to 10 cm and 10 to 50 cm depths of Niška Banja region, Serbia, using a low background gamma spectroscopy with 3″ × 3″ NaI(Tl) scintillation detector. The mean absorbed dose rate of 0–10 cm and 10–50 cm depth soil were 66.1 and 60.4 nGy/h, respectively which was close to UNSCEAR worldwide value. The radium equivalent and annual effective dose effect were lower than the permissible level. Therefore, there is no significant radiological risk from the soil to residents living in this region.
PB  - Akademiai Kiado ZRt.
PB  - Springer
T2  - Journal of Radioanalytical and Nuclear Chemistry
T1  - Distribution of radionuclides and associated radiological risk assessment of soils from Niška Banja, Serbia
EP  - 2613
IS  - 5
SP  - 2605
VL  - 333
DO  - 10.1007/s10967-023-09017-w
ER  - 

@article{
author = "Sahoo, Sarata Kumar and Žunić, Zora S. and Veerasamy, Nimelan and Natarajan, Thennaarassan and Zhukovsky, Michael and Jovanović, Peter and Veselinović, Nenad and Janićijević, Aco and Onischenko, Aleksandra and Yarmoshenko, Ilia and Ramola, Rakesh C.",
year = "2024",
abstract = "The activity concentrations of 226Ra, 232Th and 40K were determined in 43 soil samples collected from 0 to 10 cm and 10 to 50 cm depths of Niška Banja region, Serbia, using a low background gamma spectroscopy with 3″ × 3″ NaI(Tl) scintillation detector. The mean absorbed dose rate of 0–10 cm and 10–50 cm depth soil were 66.1 and 60.4 nGy/h, respectively which was close to UNSCEAR worldwide value. The radium equivalent and annual effective dose effect were lower than the permissible level. Therefore, there is no significant radiological risk from the soil to residents living in this region.",
publisher = "Akademiai Kiado ZRt., Springer",
journal = "Journal of Radioanalytical and Nuclear Chemistry",
title = "Distribution of radionuclides and associated radiological risk assessment of soils from Niška Banja, Serbia",
pages = "2613-2605",
number = "5",
volume = "333",
doi = "10.1007/s10967-023-09017-w"
}

Sahoo, S. K., Žunić, Z. S., Veerasamy, N., Natarajan, T., Zhukovsky, M., Jovanović, P., Veselinović, N., Janićijević, A., Onischenko, A., Yarmoshenko, I.,& Ramola, R. C.. (2024). Distribution of radionuclides and associated radiological risk assessment of soils from Niška Banja, Serbia. in Journal of Radioanalytical and Nuclear Chemistry
Akademiai Kiado ZRt.., 333(5), 2605-2613.
https://doi.org/10.1007/s10967-023-09017-w

Sahoo SK, Žunić ZS, Veerasamy N, Natarajan T, Zhukovsky M, Jovanović P, Veselinović N, Janićijević A, Onischenko A, Yarmoshenko I, Ramola RC. Distribution of radionuclides and associated radiological risk assessment of soils from Niška Banja, Serbia. in Journal of Radioanalytical and Nuclear Chemistry. 2024;333(5):2605-2613.
doi:10.1007/s10967-023-09017-w .

Sahoo, Sarata Kumar, Žunić, Zora S., Veerasamy, Nimelan, Natarajan, Thennaarassan, Zhukovsky, Michael, Jovanović, Peter, Veselinović, Nenad, Janićijević, Aco, Onischenko, Aleksandra, Yarmoshenko, Ilia, Ramola, Rakesh C., "Distribution of radionuclides and associated radiological risk assessment of soils from Niška Banja, Serbia" in Journal of Radioanalytical and Nuclear Chemistry, 333, no. 5 (2024):2605-2613,
https://doi.org/10.1007/s10967-023-09017-w . .

TY  - JOUR
AU  - Jevtić, Sanja D.
AU  - Srećković, Milesa Ž.
AU  - Mitrović, Nebojša S.
AU  - Zarubica, Katarina M.
AU  - Zarubica, Veljko S.
AU  - Janićijević, Aco J.
AU  - Stević, Zoran M.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6636
AB  - Aromatic plants and laser beam wavelength in the red range of visible spectra (623.8 nm), most commonly used for treating plant species, were selected. As there is not much information in the references, it is necessary to set a scale with qualitative and partially quantitative evaluations of the results. Specimens of thyme seed (Thymus vulgaris) were selected as aromatic plants for studying the effect of low-power lasers on plant development, and continuous He-Ne laser, with irradiation times in the range of minutes.
AB  - У овом раду су изабране ароматичне биљке и снопови ласера таласних дужина (623.8 nm), којима су најчешће третиране биљне врсте. Пошто не постоји много података у референцама, потребно је да се резултати поставе у скалу са квалитативним и делимично квантитативним евалуацијама резултата. Као ароматичне биљке и проучавање утицаја ласера ниске снаге на њихов развој, изабрани су узорци семена мајчине душице (Thymus vulgaris) и континуални He-Ne ласер, са временима озрачавања реда минута.
PB  - Vinca Inst Nuclear Sci
T2  - Nuclear Technology and Radiation Protection
T1  - INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS
T1  - УТИЦАЈ ГАСНИХ ЛАСЕРА У КОНТИНУАЛНОМ И ИМПУЛСНОМ РЕЖИМУ НА КАРАКТЕРИСТИКЕ БИОМАТЕРИЈАЛА
EP  - 63
IS  - 1
SP  - 59
VL  - 38
DO  - 10.2298/NTRP2301059J
ER  - 

@article{
author = "Jevtić, Sanja D. and Srećković, Milesa Ž. and Mitrović, Nebojša S. and Zarubica, Katarina M. and Zarubica, Veljko S. and Janićijević, Aco J. and Stević, Zoran M.",
year = "2023",
abstract = "Aromatic plants and laser beam wavelength in the red range of visible spectra (623.8 nm), most commonly used for treating plant species, were selected. As there is not much information in the references, it is necessary to set a scale with qualitative and partially quantitative evaluations of the results. Specimens of thyme seed (Thymus vulgaris) were selected as aromatic plants for studying the effect of low-power lasers on plant development, and continuous He-Ne laser, with irradiation times in the range of minutes., У овом раду су изабране ароматичне биљке и снопови ласера таласних дужина (623.8 nm), којима су најчешће третиране биљне врсте. Пошто не постоји много података у референцама, потребно је да се резултати поставе у скалу са квалитативним и делимично квантитативним евалуацијама резултата. Као ароматичне биљке и проучавање утицаја ласера ниске снаге на њихов развој, изабрани су узорци семена мајчине душице (Thymus vulgaris) и континуални He-Ne ласер, са временима озрачавања реда минута.",
publisher = "Vinca Inst Nuclear Sci",
journal = "Nuclear Technology and Radiation Protection",
title = "INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS, УТИЦАЈ ГАСНИХ ЛАСЕРА У КОНТИНУАЛНОМ И ИМПУЛСНОМ РЕЖИМУ НА КАРАКТЕРИСТИКЕ БИОМАТЕРИЈАЛА",
pages = "63-59",
number = "1",
volume = "38",
doi = "10.2298/NTRP2301059J"
}

Jevtić, S. D., Srećković, M. Ž., Mitrović, N. S., Zarubica, K. M., Zarubica, V. S., Janićijević, A. J.,& Stević, Z. M.. (2023). INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS. in Nuclear Technology and Radiation Protection
Vinca Inst Nuclear Sci., 38(1), 59-63.
https://doi.org/10.2298/NTRP2301059J

Jevtić SD, Srećković MŽ, Mitrović NS, Zarubica KM, Zarubica VS, Janićijević AJ, Stević ZM. INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS. in Nuclear Technology and Radiation Protection. 2023;38(1):59-63.
doi:10.2298/NTRP2301059J .

Jevtić, Sanja D., Srećković, Milesa Ž., Mitrović, Nebojša S., Zarubica, Katarina M., Zarubica, Veljko S., Janićijević, Aco J., Stević, Zoran M., "INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS" in Nuclear Technology and Radiation Protection, 38, no. 1 (2023):59-63,
https://doi.org/10.2298/NTRP2301059J . .

TY  - JOUR
AU  - Kolarž, Predrag
AU  - Ilić, Anđelija Ž.
AU  - Janković, Marko
AU  - Janićijević, Aco
AU  - Trbovich, Alexander M.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6417
AB  - Small air ions have the ability to charge airborne particles, thereby increasing their accumulation on surfaces. Indoor air purification by applying ionization uses electrostatic particle deposition. Respiratory pathogens, including viruses and respiratory droplets carrying viruses or other pathogens, represent bioaerosols, whose particle size distributions contain increasingly larger proportion of fine and ultrafine particles, as the evaporation process proceeds. We have generated two model aerosols: the nebulized NaCl solution, resembling human saliva, and the cigarette smoke, having relatively low water content. We have conducted real life experiments of such surrogate aerosol particle deposition without ionization, using bipolar ionization, as well as using unipolar negative air ions. Particle number concentrations have been measured in the 10 nm–10 μm particle size range. The calculated deposition rates and aerosol particle half-life times were correlated with bioaerosol pathogens based on the core pathogen sizes. Bipolar ionizers emitting equal concentrations of positive and negative ions had low impact to the particle concentration decrease. Intense negative air ionization resulted in pronounced deposition rate increases, particularly in the particle size range of viruses including the SARS-CoV-2. The impact of negative air ionization was most pronounced in the same size range where the deposition rates without ionization were the lowest. Therefore, the results are very promising from the standpoint of air purification and bioaerosol pathogen removal, bearing in mind that the effect of ions will be most pronounced if the unipolar ion rich air stream is directed towards the breathing zone.
PB  - Elsevier Ltd
T2  - Journal of Aerosol Science
T1  - Estimating aerosol particle removal in indoor air by ion-enhanced deposition
SP  - 106199
VL  - 173
DO  - 10.1016/j.jaerosci.2023.106199
ER  - 

@article{
author = "Kolarž, Predrag and Ilić, Anđelija Ž. and Janković, Marko and Janićijević, Aco and Trbovich, Alexander M.",
year = "2023",
abstract = "Small air ions have the ability to charge airborne particles, thereby increasing their accumulation on surfaces. Indoor air purification by applying ionization uses electrostatic particle deposition. Respiratory pathogens, including viruses and respiratory droplets carrying viruses or other pathogens, represent bioaerosols, whose particle size distributions contain increasingly larger proportion of fine and ultrafine particles, as the evaporation process proceeds. We have generated two model aerosols: the nebulized NaCl solution, resembling human saliva, and the cigarette smoke, having relatively low water content. We have conducted real life experiments of such surrogate aerosol particle deposition without ionization, using bipolar ionization, as well as using unipolar negative air ions. Particle number concentrations have been measured in the 10 nm–10 μm particle size range. The calculated deposition rates and aerosol particle half-life times were correlated with bioaerosol pathogens based on the core pathogen sizes. Bipolar ionizers emitting equal concentrations of positive and negative ions had low impact to the particle concentration decrease. Intense negative air ionization resulted in pronounced deposition rate increases, particularly in the particle size range of viruses including the SARS-CoV-2. The impact of negative air ionization was most pronounced in the same size range where the deposition rates without ionization were the lowest. Therefore, the results are very promising from the standpoint of air purification and bioaerosol pathogen removal, bearing in mind that the effect of ions will be most pronounced if the unipolar ion rich air stream is directed towards the breathing zone.",
publisher = "Elsevier Ltd",
journal = "Journal of Aerosol Science",
title = "Estimating aerosol particle removal in indoor air by ion-enhanced deposition",
pages = "106199",
volume = "173",
doi = "10.1016/j.jaerosci.2023.106199"
}

Kolarž, P., Ilić, A. Ž., Janković, M., Janićijević, A.,& Trbovich, A. M.. (2023). Estimating aerosol particle removal in indoor air by ion-enhanced deposition. in Journal of Aerosol Science
Elsevier Ltd., 173, 106199.
https://doi.org/10.1016/j.jaerosci.2023.106199

Kolarž P, Ilić AŽ, Janković M, Janićijević A, Trbovich AM. Estimating aerosol particle removal in indoor air by ion-enhanced deposition. in Journal of Aerosol Science. 2023;173:106199.
doi:10.1016/j.jaerosci.2023.106199 .

Kolarž, Predrag, Ilić, Anđelija Ž., Janković, Marko, Janićijević, Aco, Trbovich, Alexander M., "Estimating aerosol particle removal in indoor air by ion-enhanced deposition" in Journal of Aerosol Science, 173 (2023):106199,
https://doi.org/10.1016/j.jaerosci.2023.106199 . .

TY  - JOUR
AU  - Nedić, Teodora M.
AU  - Janićijević, Aco J.
AU  - Jusić, Alija R.
AU  - Stanković, Koviljka Dj.
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5270
AB  - The paper represents the results of testing the effect of neutron and gamma radiation of radioactive 60 Co on electrical filters. Neutron and gamma radiation was chosen because of its conductivity. The analysis of the standard structure of the electric filter found that neutron and gamma radiation can affect the value of the capacitance as the most important component of the filter. The presented results are a contribution to the wider research of the radiation resistance of elements for the coordination of insulation at the low-voltage level. The experiments were performed on commercial capacitors that are installed in electric filters. Measurements were made with professional equipment under well-controlled laboratory conditions. The combined measurement uncertainty of the experimental procedure was less than 5 %.
PB  - Vinca Inst Nuclear Sci
T2  - Nuclear Technology and Radiation Protection
T1  - Influence Of Radiation On The Stability Of Electrical Filters Characteristics As Components For Overvoltage Protection
EP  - 118
IS  - 2
SP  - 111
VL  - 37
DO  - 10.2298/ntrp2202111n
ER  - 

@article{
author = "Nedić, Teodora M. and Janićijević, Aco J. and Jusić, Alija R. and Stanković, Koviljka Dj.",
year = "2022",
abstract = "The paper represents the results of testing the effect of neutron and gamma radiation of radioactive 60 Co on electrical filters. Neutron and gamma radiation was chosen because of its conductivity. The analysis of the standard structure of the electric filter found that neutron and gamma radiation can affect the value of the capacitance as the most important component of the filter. The presented results are a contribution to the wider research of the radiation resistance of elements for the coordination of insulation at the low-voltage level. The experiments were performed on commercial capacitors that are installed in electric filters. Measurements were made with professional equipment under well-controlled laboratory conditions. The combined measurement uncertainty of the experimental procedure was less than 5 %.",
publisher = "Vinca Inst Nuclear Sci",
journal = "Nuclear Technology and Radiation Protection",
title = "Influence Of Radiation On The Stability Of Electrical Filters Characteristics As Components For Overvoltage Protection",
pages = "118-111",
number = "2",
volume = "37",
doi = "10.2298/ntrp2202111n"
}

Nedić, T. M., Janićijević, A. J., Jusić, A. R.,& Stanković, K. Dj.. (2022). Influence Of Radiation On The Stability Of Electrical Filters Characteristics As Components For Overvoltage Protection. in Nuclear Technology and Radiation Protection
Vinca Inst Nuclear Sci., 37(2), 111-118.
https://doi.org/10.2298/ntrp2202111n

Nedić TM, Janićijević AJ, Jusić AR, Stanković KD. Influence Of Radiation On The Stability Of Electrical Filters Characteristics As Components For Overvoltage Protection. in Nuclear Technology and Radiation Protection. 2022;37(2):111-118.
doi:10.2298/ntrp2202111n .

Nedić, Teodora M., Janićijević, Aco J., Jusić, Alija R., Stanković, Koviljka Dj., "Influence Of Radiation On The Stability Of Electrical Filters Characteristics As Components For Overvoltage Protection" in Nuclear Technology and Radiation Protection, 37, no. 2 (2022):111-118,
https://doi.org/10.2298/ntrp2202111n . .

TY  - JOUR
AU  - Danilović, N.
AU  - Janićijević, Aco
AU  - Miladinović, T.B.
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5960
AB  - A new air cooler design (“specific two-level crystallization incubator”) with a specific arrangement of laboratory vessels by levels and double-branch air conductors at the ends and a series of movable cold thresholds installed in a laboratory tube furnace is presented. The advantage of our design over existing ones is that the setups allow easy regulation of conditions and simultaneous crystallization of several substances at different crystallization rates in crucibles and Tamman test tubes. The apparatus enables the crystal growth from melt of some metals in the operating temperature range from 80 to 500°C.
PB  - Pleiades Publishing
T2  - Crystallography Reports
T1  - Air Cooler for Crystal Growth in a Laboratory Tube Furnace
EP  - 1302
IS  - 7
SP  - 1298
VL  - 67
DO  - 10.1134/S1063774522070021
ER  - 

@article{
author = "Danilović, N. and Janićijević, Aco and Miladinović, T.B.",
year = "2022",
abstract = "A new air cooler design (“specific two-level crystallization incubator”) with a specific arrangement of laboratory vessels by levels and double-branch air conductors at the ends and a series of movable cold thresholds installed in a laboratory tube furnace is presented. The advantage of our design over existing ones is that the setups allow easy regulation of conditions and simultaneous crystallization of several substances at different crystallization rates in crucibles and Tamman test tubes. The apparatus enables the crystal growth from melt of some metals in the operating temperature range from 80 to 500°C.",
publisher = "Pleiades Publishing",
journal = "Crystallography Reports",
title = "Air Cooler for Crystal Growth in a Laboratory Tube Furnace",
pages = "1302-1298",
number = "7",
volume = "67",
doi = "10.1134/S1063774522070021"
}

Danilović, N., Janićijević, A.,& Miladinović, T.B.. (2022). Air Cooler for Crystal Growth in a Laboratory Tube Furnace. in Crystallography Reports
Pleiades Publishing., 67(7), 1298-1302.
https://doi.org/10.1134/S1063774522070021

Danilović N, Janićijević A, Miladinović T. Air Cooler for Crystal Growth in a Laboratory Tube Furnace. in Crystallography Reports. 2022;67(7):1298-1302.
doi:10.1134/S1063774522070021 .

Danilović, N., Janićijević, Aco, Miladinović, T.B., "Air Cooler for Crystal Growth in a Laboratory Tube Furnace" in Crystallography Reports, 67, no. 7 (2022):1298-1302,
https://doi.org/10.1134/S1063774522070021 . .

TY  - JOUR
AU  - Stojanović, Nemanja
AU  - Kalezić-Glisović, Aleksandra
AU  - Janićijević, Aco
AU  - Maricić, Aleksa
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4362
AB  - Multiferroic systems are attractive to the researches worldwide due to diversity of existing applications, as well as possible novel ones. In order to contribute to understanding of the processes that take place within the structure of such a system, we subjected it to mechanochemical activation and thermal treatment. Powdery mixtures of iron and barium titanate in a mass ratio of 30% Fe and 70% BaTiO3 were activated in a planetary ball mill for time duration of 30 to 300 min and subsequently sintered at 1200 degrees C in the atmosphere of air. During the activation the system undergoes structural phase transitions, whereby the content of iron and its oxides changes. The highest Fe content was observed in the sample activated for 270 min, with local maxima in crystallite size and microstrain values and a minimum in dislocation density. The complex dielectric permittivity changes in the applied radio frequency field, rangingfrom 176.9 pF/m in thesample activated for 90 min to 918.1 pF/m in the sample activated for 180 min. As the frequency of the field increases, an exponential decrease in the magnetic with a simultaneous increase in the electrical energy losses is noticeable. The system exhibits ferromagnetic resonance, whereby longer activation in the mill shifts the resonant frequency to higher values. Negative electrical resistance was observed in all analyzed samples. The activation time changes both the demagnetization temperature and the Curie temperature of the samples undergoing heating and cooling cycles in the external permanent magnetic field. Curie temperature is the highest in the sample activated for 240 min. Thermal treatment increases the initial magnetization of all samples, with the most pronounced increase of similar to 95% in the sample activated for 300 min.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Evolution of Structural and Functional Properties of the Fe/BaTiO3 System Guided by Mechanochemical and Thermal Treatment
EP  - 176
IS  - 2
SP  - 163
VL  - 52
DO  - 10.2298/SOS2002163S
ER  - 

@article{
author = "Stojanović, Nemanja and Kalezić-Glisović, Aleksandra and Janićijević, Aco and Maricić, Aleksa",
year = "2020",
abstract = "Multiferroic systems are attractive to the researches worldwide due to diversity of existing applications, as well as possible novel ones. In order to contribute to understanding of the processes that take place within the structure of such a system, we subjected it to mechanochemical activation and thermal treatment. Powdery mixtures of iron and barium titanate in a mass ratio of 30% Fe and 70% BaTiO3 were activated in a planetary ball mill for time duration of 30 to 300 min and subsequently sintered at 1200 degrees C in the atmosphere of air. During the activation the system undergoes structural phase transitions, whereby the content of iron and its oxides changes. The highest Fe content was observed in the sample activated for 270 min, with local maxima in crystallite size and microstrain values and a minimum in dislocation density. The complex dielectric permittivity changes in the applied radio frequency field, rangingfrom 176.9 pF/m in thesample activated for 90 min to 918.1 pF/m in the sample activated for 180 min. As the frequency of the field increases, an exponential decrease in the magnetic with a simultaneous increase in the electrical energy losses is noticeable. The system exhibits ferromagnetic resonance, whereby longer activation in the mill shifts the resonant frequency to higher values. Negative electrical resistance was observed in all analyzed samples. The activation time changes both the demagnetization temperature and the Curie temperature of the samples undergoing heating and cooling cycles in the external permanent magnetic field. Curie temperature is the highest in the sample activated for 240 min. Thermal treatment increases the initial magnetization of all samples, with the most pronounced increase of similar to 95% in the sample activated for 300 min.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Evolution of Structural and Functional Properties of the Fe/BaTiO3 System Guided by Mechanochemical and Thermal Treatment",
pages = "176-163",
number = "2",
volume = "52",
doi = "10.2298/SOS2002163S"
}

Stojanović, N., Kalezić-Glisović, A., Janićijević, A.,& Maricić, A.. (2020). Evolution of Structural and Functional Properties of the Fe/BaTiO3 System Guided by Mechanochemical and Thermal Treatment. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 52(2), 163-176.
https://doi.org/10.2298/SOS2002163S

Stojanović N, Kalezić-Glisović A, Janićijević A, Maricić A. Evolution of Structural and Functional Properties of the Fe/BaTiO3 System Guided by Mechanochemical and Thermal Treatment. in Science of Sintering. 2020;52(2):163-176.
doi:10.2298/SOS2002163S .

Stojanović, Nemanja, Kalezić-Glisović, Aleksandra, Janićijević, Aco, Maricić, Aleksa, "Evolution of Structural and Functional Properties of the Fe/BaTiO3 System Guided by Mechanochemical and Thermal Treatment" in Science of Sintering, 52, no. 2 (2020):163-176,
https://doi.org/10.2298/SOS2002163S . .

TY  - JOUR
AU  - Arbutina, Dalibor S.
AU  - Vasić-Milovanović, Aleksandra L.
AU  - Nedić, Teodora M.
AU  - Janićijević, Aco
AU  - Timotijević, Ljubinko B.
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4406
AB  - The possibility of substituting the usage of a radioactive a-source to improve the characteristics of the gas surge arrester is considered in this paper. The solution to this problem is sought in the engineering of the characteristics by applying different electrode materials and varying electrode surface topography. Materials that differ in the output work value were examined. The electrode surface topographies were either polished, or with engraved regular spikes, or with polished cavities. The paper is mostly experimental in nature. The experiments were performed under well-controlled laboratory conditions. The measurement uncertainty of the experimental procedure was satisfactory. Experimental results were processed by sophisticated statistical methods of low statistical unreliability. The obtained results show that it is possible to avoid the installation of a radioactive source in the gas surge arresters and how it should be done. In this way, a possible contamination of the natural environment with extremely dangerous alpha - radioactive sources would be avoided.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Nuclear Technology & Radiation Protection
T1  - Possibility of achieving an acceptable response rate of gas-filled surge arresters by substitution of alpha radiation sources by selection of electrode material and the electrode surface topography
EP  - 234
IS  - 3
SP  - 223
VL  - 35
DO  - 10.2298/NTRP2003223A
ER  - 

@article{
author = "Arbutina, Dalibor S. and Vasić-Milovanović, Aleksandra L. and Nedić, Teodora M. and Janićijević, Aco and Timotijević, Ljubinko B.",
year = "2020",
abstract = "The possibility of substituting the usage of a radioactive a-source to improve the characteristics of the gas surge arrester is considered in this paper. The solution to this problem is sought in the engineering of the characteristics by applying different electrode materials and varying electrode surface topography. Materials that differ in the output work value were examined. The electrode surface topographies were either polished, or with engraved regular spikes, or with polished cavities. The paper is mostly experimental in nature. The experiments were performed under well-controlled laboratory conditions. The measurement uncertainty of the experimental procedure was satisfactory. Experimental results were processed by sophisticated statistical methods of low statistical unreliability. The obtained results show that it is possible to avoid the installation of a radioactive source in the gas surge arresters and how it should be done. In this way, a possible contamination of the natural environment with extremely dangerous alpha - radioactive sources would be avoided.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Nuclear Technology & Radiation Protection",
title = "Possibility of achieving an acceptable response rate of gas-filled surge arresters by substitution of alpha radiation sources by selection of electrode material and the electrode surface topography",
pages = "234-223",
number = "3",
volume = "35",
doi = "10.2298/NTRP2003223A"
}

Arbutina, D. S., Vasić-Milovanović, A. L., Nedić, T. M., Janićijević, A.,& Timotijević, L. B.. (2020). Possibility of achieving an acceptable response rate of gas-filled surge arresters by substitution of alpha radiation sources by selection of electrode material and the electrode surface topography. in Nuclear Technology & Radiation Protection
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 35(3), 223-234.
https://doi.org/10.2298/NTRP2003223A

Arbutina DS, Vasić-Milovanović AL, Nedić TM, Janićijević A, Timotijević LB. Possibility of achieving an acceptable response rate of gas-filled surge arresters by substitution of alpha radiation sources by selection of electrode material and the electrode surface topography. in Nuclear Technology & Radiation Protection. 2020;35(3):223-234.
doi:10.2298/NTRP2003223A .

Arbutina, Dalibor S., Vasić-Milovanović, Aleksandra L., Nedić, Teodora M., Janićijević, Aco, Timotijević, Ljubinko B., "Possibility of achieving an acceptable response rate of gas-filled surge arresters by substitution of alpha radiation sources by selection of electrode material and the electrode surface topography" in Nuclear Technology & Radiation Protection, 35, no. 3 (2020):223-234,
https://doi.org/10.2298/NTRP2003223A . .

TY  - JOUR
AU  - Nedić, Teodora M.
AU  - Janićijević, Aco
AU  - Stanković, Koviljka
AU  - Kartalović, Nenad
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4431
AB  - The possibility of the classical response rate engineering and the long-term deconditioning of the gas-filled surge arresters is considered in this paper. The obtained results are compared with the same results obtained with the gas-filled surge arrester with application of an alpha radioactive source. The work is of an experimental nature. Experiments were performed on the multipurpose gas-filled surge arrester model under well-controlled conditions. The measurement uncertainty of the experimental procedure was less than 8 %. The results were processed by statistical data processing software. To draw impulse characteristics, the law of constancy of surfaces below the impulse voltage in the volt-second area, was used.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Nuclear Technology & Radiation Protection
T1  - Efficient replacement of the radioactive sources in the gas-filled surge arresters construction for the insulation co-ordination at the low voltage level
EP  - 137
IS  - 2
SP  - 130
VL  - 35
DO  - 10.2298/NTRP2002130N
ER  - 

@article{
author = "Nedić, Teodora M. and Janićijević, Aco and Stanković, Koviljka and Kartalović, Nenad",
year = "2020",
abstract = "The possibility of the classical response rate engineering and the long-term deconditioning of the gas-filled surge arresters is considered in this paper. The obtained results are compared with the same results obtained with the gas-filled surge arrester with application of an alpha radioactive source. The work is of an experimental nature. Experiments were performed on the multipurpose gas-filled surge arrester model under well-controlled conditions. The measurement uncertainty of the experimental procedure was less than 8 %. The results were processed by statistical data processing software. To draw impulse characteristics, the law of constancy of surfaces below the impulse voltage in the volt-second area, was used.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Nuclear Technology & Radiation Protection",
title = "Efficient replacement of the radioactive sources in the gas-filled surge arresters construction for the insulation co-ordination at the low voltage level",
pages = "137-130",
number = "2",
volume = "35",
doi = "10.2298/NTRP2002130N"
}

Nedić, T. M., Janićijević, A., Stanković, K.,& Kartalović, N.. (2020). Efficient replacement of the radioactive sources in the gas-filled surge arresters construction for the insulation co-ordination at the low voltage level. in Nuclear Technology & Radiation Protection
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 35(2), 130-137.
https://doi.org/10.2298/NTRP2002130N

Nedić TM, Janićijević A, Stanković K, Kartalović N. Efficient replacement of the radioactive sources in the gas-filled surge arresters construction for the insulation co-ordination at the low voltage level. in Nuclear Technology & Radiation Protection. 2020;35(2):130-137.
doi:10.2298/NTRP2002130N .

Nedić, Teodora M., Janićijević, Aco, Stanković, Koviljka, Kartalović, Nenad, "Efficient replacement of the radioactive sources in the gas-filled surge arresters construction for the insulation co-ordination at the low voltage level" in Nuclear Technology & Radiation Protection, 35, no. 2 (2020):130-137,
https://doi.org/10.2298/NTRP2002130N . .

TY  - JOUR
AU  - Nedić, Teodora M.
AU  - Janićijević, Aco
AU  - Stanković, Koviljka
AU  - Kartalović, Nenad
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4465
AB  - This work aims is to design, fabricate and test a gas surge arrester with optimum characteristics based on testing the influence of all parameters that affect the characteristics of gas surge arresters for the coordination of low voltage isolation. After extensive research on the surge arrester model and reviewing all available literature, a three-electrode prototype surge arrester was made. The prototype gas used was a mixture of 0.8 He + 0.2 SF6 and the working point was set to the right of Pashen's minimum. Examination of thus constructed prototype and three commercial surge arresters of the same nominal voltage has shown that the surge arrester model was better in every respect. It should be noted that using the developed model, gas arresters with radioactive charging can be discarded, which is important for environmental reasons. The obtained results are very important in power engineering since the operation and control of the operation of power circuits, which are the source of overvoltage which are performed by electronic circuits.
PB  - Elsevier Sci Ltd, Oxford
T2  - International Journal of Electrical Power & Energy Systems
T1  - A Three-electrode gas arrester for low voltage isolation coordination
VL  - 120
DO  - 10.1016/j.ijepes.2020.106002
ER  - 

@article{
author = "Nedić, Teodora M. and Janićijević, Aco and Stanković, Koviljka and Kartalović, Nenad",
year = "2020",
abstract = "This work aims is to design, fabricate and test a gas surge arrester with optimum characteristics based on testing the influence of all parameters that affect the characteristics of gas surge arresters for the coordination of low voltage isolation. After extensive research on the surge arrester model and reviewing all available literature, a three-electrode prototype surge arrester was made. The prototype gas used was a mixture of 0.8 He + 0.2 SF6 and the working point was set to the right of Pashen's minimum. Examination of thus constructed prototype and three commercial surge arresters of the same nominal voltage has shown that the surge arrester model was better in every respect. It should be noted that using the developed model, gas arresters with radioactive charging can be discarded, which is important for environmental reasons. The obtained results are very important in power engineering since the operation and control of the operation of power circuits, which are the source of overvoltage which are performed by electronic circuits.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "International Journal of Electrical Power & Energy Systems",
title = "A Three-electrode gas arrester for low voltage isolation coordination",
volume = "120",
doi = "10.1016/j.ijepes.2020.106002"
}

Nedić, T. M., Janićijević, A., Stanković, K.,& Kartalović, N.. (2020). A Three-electrode gas arrester for low voltage isolation coordination. in International Journal of Electrical Power & Energy Systems
Elsevier Sci Ltd, Oxford., 120.
https://doi.org/10.1016/j.ijepes.2020.106002

Nedić TM, Janićijević A, Stanković K, Kartalović N. A Three-electrode gas arrester for low voltage isolation coordination. in International Journal of Electrical Power & Energy Systems. 2020;120.
doi:10.1016/j.ijepes.2020.106002 .

Nedić, Teodora M., Janićijević, Aco, Stanković, Koviljka, Kartalović, Nenad, "A Three-electrode gas arrester for low voltage isolation coordination" in International Journal of Electrical Power & Energy Systems, 120 (2020),
https://doi.org/10.1016/j.ijepes.2020.106002 . .

TY  - JOUR
AU  - Sustersić, Tijana
AU  - Liverani, Liliana
AU  - Boccaccini, Aldo R.
AU  - Savić, Slobodan
AU  - Janićijević, Aco
AU  - Filipović, Nenad
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4338
AB  - The aim of this research was to investigate if it is possible to implicitly determine the homogeneity of the obtained electrospun fibers based on jet shape during electrospinning. Experiments were performed with 10 wt% PVA solution, and four variations in process parameters were investigated in order to examine their effect on fiber structure. Data obtained during experiments were used as input for computational simulation. The simulation results, both using commercial ANSYS and in-house software PAK, show good agreement with experiments in terms of outcome-no fiber differences in experiments were present when different voltage pairs were used, and similar jet shapes were obtained during simulations. Shapes of the electric field potential for all the used voltage pairs were very similar, due to the uniformity of the field, which is in agreement with the experiment, as no differences in fiber structure are observed in these cases. This confirms the hypothesis that based on jet shape during electrospinning, it is possible to implicitly determine the homogeneity of the obtained electrospun fibers. Differences that may occur between experiments and simulation can be a result of simplifications in simulations, influence of uniform and non-uniform electric field etc. This kind of two-phase simulation could be useful in reducing the trial-and-error approach and maintenance costs in electrospinning experiments.
PB  - IOP Publishing Ltd, Bristol
T2  - Materials Research Express
T1  - Numerical simulation of electrospinning process in commercial and in-house software PAK
IS  - 2
VL  - 6
DO  - 10.1088/2053-1591/aaeb08
ER  - 

@article{
author = "Sustersić, Tijana and Liverani, Liliana and Boccaccini, Aldo R. and Savić, Slobodan and Janićijević, Aco and Filipović, Nenad",
year = "2019",
abstract = "The aim of this research was to investigate if it is possible to implicitly determine the homogeneity of the obtained electrospun fibers based on jet shape during electrospinning. Experiments were performed with 10 wt% PVA solution, and four variations in process parameters were investigated in order to examine their effect on fiber structure. Data obtained during experiments were used as input for computational simulation. The simulation results, both using commercial ANSYS and in-house software PAK, show good agreement with experiments in terms of outcome-no fiber differences in experiments were present when different voltage pairs were used, and similar jet shapes were obtained during simulations. Shapes of the electric field potential for all the used voltage pairs were very similar, due to the uniformity of the field, which is in agreement with the experiment, as no differences in fiber structure are observed in these cases. This confirms the hypothesis that based on jet shape during electrospinning, it is possible to implicitly determine the homogeneity of the obtained electrospun fibers. Differences that may occur between experiments and simulation can be a result of simplifications in simulations, influence of uniform and non-uniform electric field etc. This kind of two-phase simulation could be useful in reducing the trial-and-error approach and maintenance costs in electrospinning experiments.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Materials Research Express",
title = "Numerical simulation of electrospinning process in commercial and in-house software PAK",
number = "2",
volume = "6",
doi = "10.1088/2053-1591/aaeb08"
}

Sustersić, T., Liverani, L., Boccaccini, A. R., Savić, S., Janićijević, A.,& Filipović, N.. (2019). Numerical simulation of electrospinning process in commercial and in-house software PAK. in Materials Research Express
IOP Publishing Ltd, Bristol., 6(2).
https://doi.org/10.1088/2053-1591/aaeb08

Sustersić T, Liverani L, Boccaccini AR, Savić S, Janićijević A, Filipović N. Numerical simulation of electrospinning process in commercial and in-house software PAK. in Materials Research Express. 2019;6(2).
doi:10.1088/2053-1591/aaeb08 .

Sustersić, Tijana, Liverani, Liliana, Boccaccini, Aldo R., Savić, Slobodan, Janićijević, Aco, Filipović, Nenad, "Numerical simulation of electrospinning process in commercial and in-house software PAK" in Materials Research Express, 6, no. 2 (2019),
https://doi.org/10.1088/2053-1591/aaeb08 . .

TY  - JOUR
AU  - Žunić, Zora S.
AU  - Stojanovska, Zdenka A.
AU  - Boev, Blažo
AU  - Šorša, Ajka
AU  - Čeliković, Igor T.
AU  - Ćurguz, Zoran
AU  - Ronnquist, Tryggve
AU  - Janićijević, Aco
AU  - Alavantić, Dragan
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4340
AB  - The paper deals with the analysis of the annual indoor radon concentrations variations due to different geological parameters of Sjenica community, Western Serbia. The measured Rn-222 concentrations were ranging from 10 to 1130 Bq/m(3). In 14% of the buildings, the radon action level of 300 Bq/m(3) is exceeded, indicating that Sjenica community could be characterized as a radon priority area. Each of 35 measuring location was georeferenced and corresponding lithostratigraphic units and geological period was assigned. Data were analyzed using the multiple linear regression (MLR) method and two predictive models were developed. The MLR model generated by the geological periods explained 17% of the radon variability while, the better one, was the lithostratigraphic MLR model, which explained 52% of the radon variability. Analysis has shown that lithostratigraphic units are important parameters in the prediction of radon levels.
PB  - North Univ  Baia Mare, Baia Mare
T2  - Carpathian Journal of Earth and Environmental Sciences
T1  - Sjenica, a newly identified radon priority area in Serbia, and radon data correlated with geological parameters using the multiple linear regression model
EP  - 244
IS  - 1
SP  - 235
VL  - 14
DO  - 10.26471/cjees/2019/014/075
ER  - 

@article{
author = "Žunić, Zora S. and Stojanovska, Zdenka A. and Boev, Blažo and Šorša, Ajka and Čeliković, Igor T. and Ćurguz, Zoran and Ronnquist, Tryggve and Janićijević, Aco and Alavantić, Dragan",
year = "2019",
abstract = "The paper deals with the analysis of the annual indoor radon concentrations variations due to different geological parameters of Sjenica community, Western Serbia. The measured Rn-222 concentrations were ranging from 10 to 1130 Bq/m(3). In 14% of the buildings, the radon action level of 300 Bq/m(3) is exceeded, indicating that Sjenica community could be characterized as a radon priority area. Each of 35 measuring location was georeferenced and corresponding lithostratigraphic units and geological period was assigned. Data were analyzed using the multiple linear regression (MLR) method and two predictive models were developed. The MLR model generated by the geological periods explained 17% of the radon variability while, the better one, was the lithostratigraphic MLR model, which explained 52% of the radon variability. Analysis has shown that lithostratigraphic units are important parameters in the prediction of radon levels.",
publisher = "North Univ  Baia Mare, Baia Mare",
journal = "Carpathian Journal of Earth and Environmental Sciences",
title = "Sjenica, a newly identified radon priority area in Serbia, and radon data correlated with geological parameters using the multiple linear regression model",
pages = "244-235",
number = "1",
volume = "14",
doi = "10.26471/cjees/2019/014/075"
}

Žunić, Z. S., Stojanovska, Z. A., Boev, B., Šorša, A., Čeliković, I. T., Ćurguz, Z., Ronnquist, T., Janićijević, A.,& Alavantić, D.. (2019). Sjenica, a newly identified radon priority area in Serbia, and radon data correlated with geological parameters using the multiple linear regression model. in Carpathian Journal of Earth and Environmental Sciences
North Univ  Baia Mare, Baia Mare., 14(1), 235-244.
https://doi.org/10.26471/cjees/2019/014/075

Žunić ZS, Stojanovska ZA, Boev B, Šorša A, Čeliković IT, Ćurguz Z, Ronnquist T, Janićijević A, Alavantić D. Sjenica, a newly identified radon priority area in Serbia, and radon data correlated with geological parameters using the multiple linear regression model. in Carpathian Journal of Earth and Environmental Sciences. 2019;14(1):235-244.
doi:10.26471/cjees/2019/014/075 .

Žunić, Zora S., Stojanovska, Zdenka A., Boev, Blažo, Šorša, Ajka, Čeliković, Igor T., Ćurguz, Zoran, Ronnquist, Tryggve, Janićijević, Aco, Alavantić, Dragan, "Sjenica, a newly identified radon priority area in Serbia, and radon data correlated with geological parameters using the multiple linear regression model" in Carpathian Journal of Earth and Environmental Sciences, 14, no. 1 (2019):235-244,
https://doi.org/10.26471/cjees/2019/014/075 . .

TY  - JOUR
AU  - Obrenović, Marija D.
AU  - Janićijević, Aco
AU  - Arbutina, Dalibor S.
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3766
AB  - This work considers the manifestation of spontaneous breakdowns of Geiger-Mueller counters. This is an experimental type of work. The reasons leading to the spontaneous breakdowns of Geiger-Mueller counters have been analysed under controlled laboratory conditions. The experiments were carried out under the "constant voltage". The tested Geiger-Mueller chambers were commercial chambers of the radial electric field and homogenous electric field. The experimental-statistical methods were used in order to choose the chambers with identical features (with 0.1 % of statistical reliability).The results of experiments showed that the spontaneous breakdown of the Geiger-Mueller counter happens even in the conditions of shielding. They also showed that those breakdowns have cumulative features. The reason for that is a positive feedback between the spontaneous breakdowns. The explanation is confirmed and quantified by the working gas filtering experiments.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Nuclear Technology & Radiation Protection
T1  - Statistical review of the insulation capacity of the geiger-mueller counter
EP  - 374
IS  - 4
SP  - 369
VL  - 33
DO  - 10.2298/NTRP180913009O
ER  - 

@article{
author = "Obrenović, Marija D. and Janićijević, Aco and Arbutina, Dalibor S.",
year = "2018",
abstract = "This work considers the manifestation of spontaneous breakdowns of Geiger-Mueller counters. This is an experimental type of work. The reasons leading to the spontaneous breakdowns of Geiger-Mueller counters have been analysed under controlled laboratory conditions. The experiments were carried out under the "constant voltage". The tested Geiger-Mueller chambers were commercial chambers of the radial electric field and homogenous electric field. The experimental-statistical methods were used in order to choose the chambers with identical features (with 0.1 % of statistical reliability).The results of experiments showed that the spontaneous breakdown of the Geiger-Mueller counter happens even in the conditions of shielding. They also showed that those breakdowns have cumulative features. The reason for that is a positive feedback between the spontaneous breakdowns. The explanation is confirmed and quantified by the working gas filtering experiments.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Nuclear Technology & Radiation Protection",
title = "Statistical review of the insulation capacity of the geiger-mueller counter",
pages = "374-369",
number = "4",
volume = "33",
doi = "10.2298/NTRP180913009O"
}

Obrenović, M. D., Janićijević, A.,& Arbutina, D. S.. (2018). Statistical review of the insulation capacity of the geiger-mueller counter. in Nuclear Technology & Radiation Protection
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 33(4), 369-374.
https://doi.org/10.2298/NTRP180913009O

Obrenović MD, Janićijević A, Arbutina DS. Statistical review of the insulation capacity of the geiger-mueller counter. in Nuclear Technology & Radiation Protection. 2018;33(4):369-374.
doi:10.2298/NTRP180913009O .

Obrenović, Marija D., Janićijević, Aco, Arbutina, Dalibor S., "Statistical review of the insulation capacity of the geiger-mueller counter" in Nuclear Technology & Radiation Protection, 33, no. 4 (2018):369-374,
https://doi.org/10.2298/NTRP180913009O . .

TY  - JOUR
AU  - Janićijević, Aco
AU  - Danilović, Nebojša
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3826
AB  - Design of modular, simple to build and handle air cooler ('crystallization support tube') installed in a laboratory tube furnace is presented. The setup allows easy regulation and simultaneous crystallization tests of different temperature gradients, shapes of crystallization fronts and rate intervals in crucibles and Tamman test tubes, enabling fast studies of obtaining crystals. The relationship between the crystallization parameters has been derived and numerically analyzed. This method can also be applied in crucible or tube furnaces.
PB  - University of Kragujevac, Faculty of Science
T2  - Kragujevac Journal of Science
T1  - Crystallization support tube in a laboratory furnace
EP  - 22
IS  - 40
SP  - 19
DO  - 10.5937/KgJSci1840019J
ER  - 

@article{
author = "Janićijević, Aco and Danilović, Nebojša",
year = "2018",
abstract = "Design of modular, simple to build and handle air cooler ('crystallization support tube') installed in a laboratory tube furnace is presented. The setup allows easy regulation and simultaneous crystallization tests of different temperature gradients, shapes of crystallization fronts and rate intervals in crucibles and Tamman test tubes, enabling fast studies of obtaining crystals. The relationship between the crystallization parameters has been derived and numerically analyzed. This method can also be applied in crucible or tube furnaces.",
publisher = "University of Kragujevac, Faculty of Science",
journal = "Kragujevac Journal of Science",
title = "Crystallization support tube in a laboratory furnace",
pages = "22-19",
number = "40",
doi = "10.5937/KgJSci1840019J"
}

Janićijević, A.,& Danilović, N.. (2018). Crystallization support tube in a laboratory furnace. in Kragujevac Journal of Science
University of Kragujevac, Faculty of Science.(40), 19-22.
https://doi.org/10.5937/KgJSci1840019J

Janićijević A, Danilović N. Crystallization support tube in a laboratory furnace. in Kragujevac Journal of Science. 2018;(40):19-22.
doi:10.5937/KgJSci1840019J .

Janićijević, Aco, Danilović, Nebojša, "Crystallization support tube in a laboratory furnace" in Kragujevac Journal of Science, no. 40 (2018):19-22,
https://doi.org/10.5937/KgJSci1840019J . .

TY  - JOUR
AU  - Janićijević, Aco
AU  - Danilović, Nebojša
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3891
AB  - A design for an air-cooled tube (crystallization incubator') installed in a laboratory tube furnace is presented. The setup allows regulation and simultaneous crystallization of several substances at different temperature gradients and rate intervals, with the purpose of obtaining crystals.
PB  - Int Union Crystallography, Chester
T2  - Journal of Applied Crystallography
T1  - Tube for obtaining crystals in a laboratory furnace
EP  - 1258
SP  - 1257
VL  - 51
DO  - 10.1107/S1600576718007628
ER  - 

@article{
author = "Janićijević, Aco and Danilović, Nebojša",
year = "2018",
abstract = "A design for an air-cooled tube (crystallization incubator') installed in a laboratory tube furnace is presented. The setup allows regulation and simultaneous crystallization of several substances at different temperature gradients and rate intervals, with the purpose of obtaining crystals.",
publisher = "Int Union Crystallography, Chester",
journal = "Journal of Applied Crystallography",
title = "Tube for obtaining crystals in a laboratory furnace",
pages = "1258-1257",
volume = "51",
doi = "10.1107/S1600576718007628"
}

Janićijević, A.,& Danilović, N.. (2018). Tube for obtaining crystals in a laboratory furnace. in Journal of Applied Crystallography
Int Union Crystallography, Chester., 51, 1257-1258.
https://doi.org/10.1107/S1600576718007628

Janićijević A, Danilović N. Tube for obtaining crystals in a laboratory furnace. in Journal of Applied Crystallography. 2018;51:1257-1258.
doi:10.1107/S1600576718007628 .

Janićijević, Aco, Danilović, Nebojša, "Tube for obtaining crystals in a laboratory furnace" in Journal of Applied Crystallography, 51 (2018):1257-1258,
https://doi.org/10.1107/S1600576718007628 . .

TY  - JOUR
AU  - Awhida, Ahmed
AU  - Ujić, Predrag
AU  - Pantelić, Gordana K.
AU  - Kolarž, Predrag M.
AU  - Čeliković, Igor T.
AU  - Živanović, Miloš Z.
AU  - Janićijević, Aco
AU  - Lončar, Boris
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3953
AB  - It is indicated that the exposure to radon originating from the building materials is not negligible and the radon exhalation measurement should get more attention in the future. The experience with four different methods of the exhalation measurement, established in our laboratory for the purpose of the intercomparison is reported. Additionally, a comparison of advantages and disadvantages of used methods is discussed.
PB  - Oxford Univ Press, Oxford
T2  - Radiation Protection Dosimetry
T1  - Ad-hoc intercomparison of four different radon exhalation measurement methods
EP  - 142
IS  - 2
SP  - 138
VL  - 178
DO  - 10.1093/rpd/ncx096
ER  - 

@article{
author = "Awhida, Ahmed and Ujić, Predrag and Pantelić, Gordana K. and Kolarž, Predrag M. and Čeliković, Igor T. and Živanović, Miloš Z. and Janićijević, Aco and Lončar, Boris",
year = "2018",
abstract = "It is indicated that the exposure to radon originating from the building materials is not negligible and the radon exhalation measurement should get more attention in the future. The experience with four different methods of the exhalation measurement, established in our laboratory for the purpose of the intercomparison is reported. Additionally, a comparison of advantages and disadvantages of used methods is discussed.",
publisher = "Oxford Univ Press, Oxford",
journal = "Radiation Protection Dosimetry",
title = "Ad-hoc intercomparison of four different radon exhalation measurement methods",
pages = "142-138",
number = "2",
volume = "178",
doi = "10.1093/rpd/ncx096"
}

Awhida, A., Ujić, P., Pantelić, G. K., Kolarž, P. M., Čeliković, I. T., Živanović, M. Z., Janićijević, A.,& Lončar, B.. (2018). Ad-hoc intercomparison of four different radon exhalation measurement methods. in Radiation Protection Dosimetry
Oxford Univ Press, Oxford., 178(2), 138-142.
https://doi.org/10.1093/rpd/ncx096

Awhida A, Ujić P, Pantelić GK, Kolarž PM, Čeliković IT, Živanović MZ, Janićijević A, Lončar B. Ad-hoc intercomparison of four different radon exhalation measurement methods. in Radiation Protection Dosimetry. 2018;178(2):138-142.
doi:10.1093/rpd/ncx096 .

Awhida, Ahmed, Ujić, Predrag, Pantelić, Gordana K., Kolarž, Predrag M., Čeliković, Igor T., Živanović, Miloš Z., Janićijević, Aco, Lončar, Boris, "Ad-hoc intercomparison of four different radon exhalation measurement methods" in Radiation Protection Dosimetry, 178, no. 2 (2018):138-142,
https://doi.org/10.1093/rpd/ncx096 . .

TY  - JOUR
AU  - Đorđević, Alexandar
AU  - Savović, Svetislav
AU  - Janićijević, Aco
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3615
AB  - The two-dimensional advection-diffusion equation with variable coefficients is solved by the explicit finite-difference method for the transport of solutes through a homogenous two-dimensional domain that is finite and porous. Retardation by adsorption, periodic seepage velocity, and a dispersion coefficient proportional to this velocity are permitted. The transport is from a pulse-type point source (that ceases after a period of activity). Included are the first-order decay and zero-order production parameters proportional to the seepage velocity, and periodic boundary conditions at the origin and at the end of the domain. Results agree well with analytical solutions that were reported in the literature for special cases. It is shown that the solute concentration profile is influenced strongly by periodic velocity fluctuations. Solutions for a variety of combinations of unsteadiness of the coefficients in the advection-diffusion equation are obtainable as particular cases of the one demonstrated here. This further attests to the effectiveness of the explicit finite difference method for solving two-dimensional advection-diffusion equation with variable coefficients in finite media, which is especially important when arbitrary initial and boundary conditions are required.
PB  - Veda, Slovak Acad Sciences, Bratislava
T2  - Journal of Hydrology and Hydromechanics
T1  - Explicit finite-difference solution of two-dimensional solute transport with periodic flow in homogenous porous media
EP  - 432
IS  - 4
SP  - 426
VL  - 65
DO  - 10.1515/johh-2017-0040
ER  - 

@article{
author = "Đorđević, Alexandar and Savović, Svetislav and Janićijević, Aco",
year = "2017",
abstract = "The two-dimensional advection-diffusion equation with variable coefficients is solved by the explicit finite-difference method for the transport of solutes through a homogenous two-dimensional domain that is finite and porous. Retardation by adsorption, periodic seepage velocity, and a dispersion coefficient proportional to this velocity are permitted. The transport is from a pulse-type point source (that ceases after a period of activity). Included are the first-order decay and zero-order production parameters proportional to the seepage velocity, and periodic boundary conditions at the origin and at the end of the domain. Results agree well with analytical solutions that were reported in the literature for special cases. It is shown that the solute concentration profile is influenced strongly by periodic velocity fluctuations. Solutions for a variety of combinations of unsteadiness of the coefficients in the advection-diffusion equation are obtainable as particular cases of the one demonstrated here. This further attests to the effectiveness of the explicit finite difference method for solving two-dimensional advection-diffusion equation with variable coefficients in finite media, which is especially important when arbitrary initial and boundary conditions are required.",
publisher = "Veda, Slovak Acad Sciences, Bratislava",
journal = "Journal of Hydrology and Hydromechanics",
title = "Explicit finite-difference solution of two-dimensional solute transport with periodic flow in homogenous porous media",
pages = "432-426",
number = "4",
volume = "65",
doi = "10.1515/johh-2017-0040"
}

Đorđević, A., Savović, S.,& Janićijević, A.. (2017). Explicit finite-difference solution of two-dimensional solute transport with periodic flow in homogenous porous media. in Journal of Hydrology and Hydromechanics
Veda, Slovak Acad Sciences, Bratislava., 65(4), 426-432.
https://doi.org/10.1515/johh-2017-0040

Đorđević A, Savović S, Janićijević A. Explicit finite-difference solution of two-dimensional solute transport with periodic flow in homogenous porous media. in Journal of Hydrology and Hydromechanics. 2017;65(4):426-432.
doi:10.1515/johh-2017-0040 .

Đorđević, Alexandar, Savović, Svetislav, Janićijević, Aco, "Explicit finite-difference solution of two-dimensional solute transport with periodic flow in homogenous porous media" in Journal of Hydrology and Hydromechanics, 65, no. 4 (2017):426-432,
https://doi.org/10.1515/johh-2017-0040 . .

TY  - JOUR
AU  - Čabrić, Branislav
AU  - Janićijević, Aco
AU  - Danilović, Nebojša
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2505
AB  - A model of an air-cooled tube ("air-heat saw") installed in a laboratory tube furnace is presented. The setup ("crystallization tests bench") allows easy regulation and simultaneous crystallization tests of a series of different crystallization parameters in crucible columns, enabling fast studies of obtaining crystals from materials with unknown crystallization parameters. The relationships between the crystallization rate and parameters of air-cooled tube are given and numerically analyzed. This method can also be applied in crucible or chamber furnaces.
PB  - Maik Nauka/Interperiodica/Springer, New York
T2  - Crystallography Reports
T1  - Crystallization tests bench
EP  - 200
IS  - 1
SP  - 198
VL  - 58
DO  - 10.1134/S1063774513010161
ER  - 

@article{
author = "Čabrić, Branislav and Janićijević, Aco and Danilović, Nebojša",
year = "2013",
abstract = "A model of an air-cooled tube ("air-heat saw") installed in a laboratory tube furnace is presented. The setup ("crystallization tests bench") allows easy regulation and simultaneous crystallization tests of a series of different crystallization parameters in crucible columns, enabling fast studies of obtaining crystals from materials with unknown crystallization parameters. The relationships between the crystallization rate and parameters of air-cooled tube are given and numerically analyzed. This method can also be applied in crucible or chamber furnaces.",
publisher = "Maik Nauka/Interperiodica/Springer, New York",
journal = "Crystallography Reports",
title = "Crystallization tests bench",
pages = "200-198",
number = "1",
volume = "58",
doi = "10.1134/S1063774513010161"
}

Čabrić, B., Janićijević, A.,& Danilović, N.. (2013). Crystallization tests bench. in Crystallography Reports
Maik Nauka/Interperiodica/Springer, New York., 58(1), 198-200.
https://doi.org/10.1134/S1063774513010161

Čabrić B, Janićijević A, Danilović N. Crystallization tests bench. in Crystallography Reports. 2013;58(1):198-200.
doi:10.1134/S1063774513010161 .

Čabrić, Branislav, Janićijević, Aco, Danilović, Nebojša, "Crystallization tests bench" in Crystallography Reports, 58, no. 1 (2013):198-200,
https://doi.org/10.1134/S1063774513010161 . .

TY  - JOUR
AU  - Janićijević, Aco
AU  - Danilović, Nebojša
AU  - Čabrić, Branislav
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2037
AB  - An air-cooled test tube, with a series of modular and movable rings (cylindrical-multilateral, folding-matryoshka 'crystallization comb-key'), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simultaneous crystallization tests of a series of different crystallization parameters in several columns of test tubes, enabling fast studies of obtaining crystals. This device (air body with more simple control options) can also be applied in a chamber and tube furnaces. The relations between the crystallization rate and parameters of air-cooled test tube are given and numerically analyzed.
PB  - University of Kragujevac, Faculty of Science
T2  - Kragujevac Journal of Science
T1  - Simultaneous crystallization testing in a crucible furnace
EP  - 27
IS  - 34
SP  - 23
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2037
ER  - 

@article{
author = "Janićijević, Aco and Danilović, Nebojša and Čabrić, Branislav",
year = "2012",
abstract = "An air-cooled test tube, with a series of modular and movable rings (cylindrical-multilateral, folding-matryoshka 'crystallization comb-key'), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simultaneous crystallization tests of a series of different crystallization parameters in several columns of test tubes, enabling fast studies of obtaining crystals. This device (air body with more simple control options) can also be applied in a chamber and tube furnaces. The relations between the crystallization rate and parameters of air-cooled test tube are given and numerically analyzed.",
publisher = "University of Kragujevac, Faculty of Science",
journal = "Kragujevac Journal of Science",
title = "Simultaneous crystallization testing in a crucible furnace",
pages = "27-23",
number = "34",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2037"
}

Janićijević, A., Danilović, N.,& Čabrić, B.. (2012). Simultaneous crystallization testing in a crucible furnace. in Kragujevac Journal of Science
University of Kragujevac, Faculty of Science.(34), 23-27.
https://hdl.handle.net/21.15107/rcub_technorep_2037

Janićijević A, Danilović N, Čabrić B. Simultaneous crystallization testing in a crucible furnace. in Kragujevac Journal of Science. 2012;(34):23-27.
https://hdl.handle.net/21.15107/rcub_technorep_2037 .

Janićijević, Aco, Danilović, Nebojša, Čabrić, Branislav, "Simultaneous crystallization testing in a crucible furnace" in Kragujevac Journal of Science, no. 34 (2012):23-27,
https://hdl.handle.net/21.15107/rcub_technorep_2037 .

TY  - JOUR
AU  - Čabrić, Branislav
AU  - Danilović, Nebojša
AU  - Janićijević, Aco
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1750
AB  - The cooler allows easy regulation of simultaneous crystallization tests of different crystallization parameters and substances, with the purpose of obtaining crystals from a family of newly synthesized compounds with a layered crystal structure. The procedure involves first increasing the voltage until the substances are completely melted. Then, while a constant furnace voltage is maintained, a small amount of airflow is introduced into the cooler. As a result, crystallization starts on the surface of the melts for the lower row and at the bottom of the melts for the upper row. The crystallization rate interval in each Tamman test tube is regulated by the cross-section of the airflow. Different temperature gradients in the crucibles can be tested simultaneously using an inclined cooler. Tamman test tubes and plugs of various shapes and dimensions can be mounted and thus tested at the same time. Several coolers or a planar air cooler with several columns of plugs can be installed in a chamber furnace (crystallization board).
T2  - American Laboratory
T1  - Simultaneous Crystallization Testing in a Laboratory Furnace
EP  - 19
IS  - 7
SP  - 18
VL  - 43
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1750
ER  - 

@article{
author = "Čabrić, Branislav and Danilović, Nebojša and Janićijević, Aco",
year = "2011",
abstract = "The cooler allows easy regulation of simultaneous crystallization tests of different crystallization parameters and substances, with the purpose of obtaining crystals from a family of newly synthesized compounds with a layered crystal structure. The procedure involves first increasing the voltage until the substances are completely melted. Then, while a constant furnace voltage is maintained, a small amount of airflow is introduced into the cooler. As a result, crystallization starts on the surface of the melts for the lower row and at the bottom of the melts for the upper row. The crystallization rate interval in each Tamman test tube is regulated by the cross-section of the airflow. Different temperature gradients in the crucibles can be tested simultaneously using an inclined cooler. Tamman test tubes and plugs of various shapes and dimensions can be mounted and thus tested at the same time. Several coolers or a planar air cooler with several columns of plugs can be installed in a chamber furnace (crystallization board).",
journal = "American Laboratory",
title = "Simultaneous Crystallization Testing in a Laboratory Furnace",
pages = "19-18",
number = "7",
volume = "43",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1750"
}

Čabrić, B., Danilović, N.,& Janićijević, A.. (2011). Simultaneous Crystallization Testing in a Laboratory Furnace. in American Laboratory, 43(7), 18-19.
https://hdl.handle.net/21.15107/rcub_technorep_1750

Čabrić B, Danilović N, Janićijević A. Simultaneous Crystallization Testing in a Laboratory Furnace. in American Laboratory. 2011;43(7):18-19.
https://hdl.handle.net/21.15107/rcub_technorep_1750 .

Čabrić, Branislav, Danilović, Nebojša, Janićijević, Aco, "Simultaneous Crystallization Testing in a Laboratory Furnace" in American Laboratory, 43, no. 7 (2011):18-19,
https://hdl.handle.net/21.15107/rcub_technorep_1750 .

TY  - JOUR
AU  - Čabrić, Branislav
AU  - Danilović, Nebojša
AU  - Janićijević, Aco
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1951
AB  - A model of an air-cooled tube with a number of movable plugs, installed in a laboratory tube furnace is presented. The setup (modular "crystallization shelf-comb") allows easy regulation and simultaneous crystallization tests of a series of crystallization parameters in crucible columns, enabling rapid acquisition of crystals. The relationship between the crystallization parameters has been derived and numerically analyzed. This method can also be applied in crucible or chamber furnaces.
PB  - Maik Nauka/Interperiodica/Springer, New York
T2  - Instruments and Experimental Techniques
T1  - Tube for obtaining crystals in a laboratory furnaces
EP  - 283
IS  - 2
SP  - 282
VL  - 54
DO  - 10.1134/S0020441211010210
ER  - 

@article{
author = "Čabrić, Branislav and Danilović, Nebojša and Janićijević, Aco",
year = "2011",
abstract = "A model of an air-cooled tube with a number of movable plugs, installed in a laboratory tube furnace is presented. The setup (modular "crystallization shelf-comb") allows easy regulation and simultaneous crystallization tests of a series of crystallization parameters in crucible columns, enabling rapid acquisition of crystals. The relationship between the crystallization parameters has been derived and numerically analyzed. This method can also be applied in crucible or chamber furnaces.",
publisher = "Maik Nauka/Interperiodica/Springer, New York",
journal = "Instruments and Experimental Techniques",
title = "Tube for obtaining crystals in a laboratory furnaces",
pages = "283-282",
number = "2",
volume = "54",
doi = "10.1134/S0020441211010210"
}

Čabrić, B., Danilović, N.,& Janićijević, A.. (2011). Tube for obtaining crystals in a laboratory furnaces. in Instruments and Experimental Techniques
Maik Nauka/Interperiodica/Springer, New York., 54(2), 282-283.
https://doi.org/10.1134/S0020441211010210

Čabrić B, Danilović N, Janićijević A. Tube for obtaining crystals in a laboratory furnaces. in Instruments and Experimental Techniques. 2011;54(2):282-283.
doi:10.1134/S0020441211010210 .

Čabrić, Branislav, Danilović, Nebojša, Janićijević, Aco, "Tube for obtaining crystals in a laboratory furnaces" in Instruments and Experimental Techniques, 54, no. 2 (2011):282-283,
https://doi.org/10.1134/S0020441211010210 . .

TY  - JOUR
AU  - Gligorijević, Bojan
AU  - Schmidt, Harald
AU  - Radović, Nenad
AU  - Davidović, Milorad
AU  - Kutin, Marina
AU  - Janićijević, Aco
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1686
AB  - Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an atomic level. An important factor for silica layer growth is oxygen diffusion in protective thermally grown layers. In order to get insight of the oxygen diffusion mechanism, analysis should include both, bulk and short-circuit diffusion. XRD measurements of oxidized Si-C-N and SiC revealed the possibility that oxide layers were fully crystallized and are composed of nano-sized cristobalite-like grains. Secondary ion mass spectrometry depth profile analysis after (18)O(2)-(16)O(2) isotope exchange experiments on oxidized SiC indicated that short-circuit diffusion is probably grain boundary diffusion of molecular oxygen.
PB  - World Scientific Publ Co Pte Ltd, Singapore
T2  - International Journal of Modern Physics B
T1  - Short-circuit oxygen diffusion in thermally grown silica layer
EP  - 694
IS  - 6-7
SP  - 682
VL  - 24
DO  - 10.1142/S0217979210064307
ER  - 

@article{
author = "Gligorijević, Bojan and Schmidt, Harald and Radović, Nenad and Davidović, Milorad and Kutin, Marina and Janićijević, Aco",
year = "2010",
abstract = "Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an atomic level. An important factor for silica layer growth is oxygen diffusion in protective thermally grown layers. In order to get insight of the oxygen diffusion mechanism, analysis should include both, bulk and short-circuit diffusion. XRD measurements of oxidized Si-C-N and SiC revealed the possibility that oxide layers were fully crystallized and are composed of nano-sized cristobalite-like grains. Secondary ion mass spectrometry depth profile analysis after (18)O(2)-(16)O(2) isotope exchange experiments on oxidized SiC indicated that short-circuit diffusion is probably grain boundary diffusion of molecular oxygen.",
publisher = "World Scientific Publ Co Pte Ltd, Singapore",
journal = "International Journal of Modern Physics B",
title = "Short-circuit oxygen diffusion in thermally grown silica layer",
pages = "694-682",
number = "6-7",
volume = "24",
doi = "10.1142/S0217979210064307"
}

Gligorijević, B., Schmidt, H., Radović, N., Davidović, M., Kutin, M.,& Janićijević, A.. (2010). Short-circuit oxygen diffusion in thermally grown silica layer. in International Journal of Modern Physics B
World Scientific Publ Co Pte Ltd, Singapore., 24(6-7), 682-694.
https://doi.org/10.1142/S0217979210064307

Gligorijević B, Schmidt H, Radović N, Davidović M, Kutin M, Janićijević A. Short-circuit oxygen diffusion in thermally grown silica layer. in International Journal of Modern Physics B. 2010;24(6-7):682-694.
doi:10.1142/S0217979210064307 .

Gligorijević, Bojan, Schmidt, Harald, Radović, Nenad, Davidović, Milorad, Kutin, Marina, Janićijević, Aco, "Short-circuit oxygen diffusion in thermally grown silica layer" in International Journal of Modern Physics B, 24, no. 6-7 (2010):682-694,
https://doi.org/10.1142/S0217979210064307 . .

TY  - JOUR
AU  - Danilović, Nebojša
AU  - Janićijević, Aco
AU  - Čabrić, Branislav
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1644
AB  - Design of modular, and simple to build and handle air cooler ('crystallization comb') installed in a laboratory chamber furnace is presented. The setup allows easy regulation and simultaneous crystallization tests of different temperature gradients, shapes of crystallization fronts and rate intervals in crucible columns, enabling fast studies of obtaining crystals. The relationship between the crystallization parameters has been derived and numerically analyzed. This method can also be applied in crucible or tube furnaces. .
PB  - University of Kragujevac, Faculty of Science
T2  - Kragujevac Journal of Science
T1  - Crystallization columns in a chamber furnace
EP  - 45
IS  - 32
SP  - 41
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1644
ER  - 

@article{
author = "Danilović, Nebojša and Janićijević, Aco and Čabrić, Branislav",
year = "2010",
abstract = "Design of modular, and simple to build and handle air cooler ('crystallization comb') installed in a laboratory chamber furnace is presented. The setup allows easy regulation and simultaneous crystallization tests of different temperature gradients, shapes of crystallization fronts and rate intervals in crucible columns, enabling fast studies of obtaining crystals. The relationship between the crystallization parameters has been derived and numerically analyzed. This method can also be applied in crucible or tube furnaces. .",
publisher = "University of Kragujevac, Faculty of Science",
journal = "Kragujevac Journal of Science",
title = "Crystallization columns in a chamber furnace",
pages = "45-41",
number = "32",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1644"
}

Danilović, N., Janićijević, A.,& Čabrić, B.. (2010). Crystallization columns in a chamber furnace. in Kragujevac Journal of Science
University of Kragujevac, Faculty of Science.(32), 41-45.
https://hdl.handle.net/21.15107/rcub_technorep_1644

Danilović N, Janićijević A, Čabrić B. Crystallization columns in a chamber furnace. in Kragujevac Journal of Science. 2010;(32):41-45.
https://hdl.handle.net/21.15107/rcub_technorep_1644 .

Danilović, Nebojša, Janićijević, Aco, Čabrić, Branislav, "Crystallization columns in a chamber furnace" in Kragujevac Journal of Science, no. 32 (2010):41-45,
https://hdl.handle.net/21.15107/rcub_technorep_1644 .

TY  - JOUR
AU  - Čabrić, Branislav
AU  - Janićijević, Aco
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1087
AB  - Several designs of air coolers (modular bilateral "crystallization shelves"), installed in laboratory furnaces are presented. The setup allows easy regulation and simultaneous crystallization of several substances at different temperature gradients, shapes of crystallization fronts and rate intervals, with the purpose of obtaining crystals.
PB  - Wiley-VCH Verlag Gmbh, Weinheim
T2  - Crystal Research and Technology
T1  - Crystallization shelves for laboratory furnaces
EP  - 343
IS  - 4
SP  - 342
VL  - 42
DO  - 10.1002/crat.200610825
ER  - 

@article{
author = "Čabrić, Branislav and Janićijević, Aco",
year = "2007",
abstract = "Several designs of air coolers (modular bilateral "crystallization shelves"), installed in laboratory furnaces are presented. The setup allows easy regulation and simultaneous crystallization of several substances at different temperature gradients, shapes of crystallization fronts and rate intervals, with the purpose of obtaining crystals.",
publisher = "Wiley-VCH Verlag Gmbh, Weinheim",
journal = "Crystal Research and Technology",
title = "Crystallization shelves for laboratory furnaces",
pages = "343-342",
number = "4",
volume = "42",
doi = "10.1002/crat.200610825"
}

Čabrić, B.,& Janićijević, A.. (2007). Crystallization shelves for laboratory furnaces. in Crystal Research and Technology
Wiley-VCH Verlag Gmbh, Weinheim., 42(4), 342-343.
https://doi.org/10.1002/crat.200610825

Čabrić B, Janićijević A. Crystallization shelves for laboratory furnaces. in Crystal Research and Technology. 2007;42(4):342-343.
doi:10.1002/crat.200610825 .

Čabrić, Branislav, Janićijević, Aco, "Crystallization shelves for laboratory furnaces" in Crystal Research and Technology, 42, no. 4 (2007):342-343,
https://doi.org/10.1002/crat.200610825 . .

TY  - JOUR
AU  - Čabrić, Branislav
AU  - Janićijević, Aco
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1197
PB  - Blackwell Publishing, Oxford
T2  - Journal of Applied Crystallography
T1  - Crystallization shelf
EP  - 391
SP  - 391
VL  - 40
DO  - 10.1107/S002188980605343X
ER  - 

@article{
author = "Čabrić, Branislav and Janićijević, Aco",
year = "2007",
publisher = "Blackwell Publishing, Oxford",
journal = "Journal of Applied Crystallography",
title = "Crystallization shelf",
pages = "391-391",
volume = "40",
doi = "10.1107/S002188980605343X"
}

Čabrić, B.,& Janićijević, A.. (2007). Crystallization shelf. in Journal of Applied Crystallography
Blackwell Publishing, Oxford., 40, 391-391.
https://doi.org/10.1107/S002188980605343X

Čabrić B, Janićijević A. Crystallization shelf. in Journal of Applied Crystallography. 2007;40:391-391.
doi:10.1107/S002188980605343X .

Čabrić, Branislav, Janićijević, Aco, "Crystallization shelf" in Journal of Applied Crystallography, 40 (2007):391-391,
https://doi.org/10.1107/S002188980605343X . .

TY  - JOUR
AU  - Čabrić, Branislav
AU  - Janićijević, Aco
PY  - 2004
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/685
AB  - A design for a modular device ('crystallization shelf') installed in a laboratory furnace is presented. The setup allows regulation and simultaneous crystallization tests of several substances at different temperature gradients, shapes of crystallization fronts and rate intervals, with the purpose of obtaining crystals.
PB  - Int Union Crystallography, Chester
T2  - Journal of Applied Crystallography
T1  - A laboratory furnace for obtaining crystals
EP  - 675
SP  - 675
VL  - 37
DO  - 10.1107/S0021889804013330
ER  - 

@article{
author = "Čabrić, Branislav and Janićijević, Aco",
year = "2004",
abstract = "A design for a modular device ('crystallization shelf') installed in a laboratory furnace is presented. The setup allows regulation and simultaneous crystallization tests of several substances at different temperature gradients, shapes of crystallization fronts and rate intervals, with the purpose of obtaining crystals.",
publisher = "Int Union Crystallography, Chester",
journal = "Journal of Applied Crystallography",
title = "A laboratory furnace for obtaining crystals",
pages = "675-675",
volume = "37",
doi = "10.1107/S0021889804013330"
}

Čabrić, B.,& Janićijević, A.. (2004). A laboratory furnace for obtaining crystals. in Journal of Applied Crystallography
Int Union Crystallography, Chester., 37, 675-675.
https://doi.org/10.1107/S0021889804013330

Čabrić B, Janićijević A. A laboratory furnace for obtaining crystals. in Journal of Applied Crystallography. 2004;37:675-675.
doi:10.1107/S0021889804013330 .

Čabrić, Branislav, Janićijević, Aco, "A laboratory furnace for obtaining crystals" in Journal of Applied Crystallography, 37 (2004):675-675,
https://doi.org/10.1107/S0021889804013330 . .