TY  - JOUR
AU  - Sedmak, Aleksandar
AU  - Hemer, Abubkr
AU  - Sedmak, Simon A.
AU  - Milović, Ljubica
AU  - Grbovic, Aleksandar
AU  - Cabrilo, Aleksandar
AU  - Kljajin, Milan
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4910
AB  - Fatigue crack growth through different welded joint regions was investigated, in terms of welded joint geometry and fatigue crack position. In the first phase of investigation, numerical simulation of crack growth in a welded joint made of steel P460NL1 was performed using extended Finite Element Methods (xFEM). Numerical models employed Paris law, using experimentally determined coefficients for each welded joint zone. Weld geometry was varied by using different heat affected zone (HAZ) widths, i.e. fatigue crack lengths. The second stage involved similar numerical models with different material (Protac 500). Fatigue lives for regions in both models were then compared.
T2  - International Journal of Fatigue
T1  - Welded joint geometry effect on fatigue crack growth resistance in different metallic materials
VL  - 150
DO  - 10.1016/j.ijfatigue.2021.106298
ER  - 

@article{
author = "Sedmak, Aleksandar and Hemer, Abubkr and Sedmak, Simon A. and Milović, Ljubica and Grbovic, Aleksandar and Cabrilo, Aleksandar and Kljajin, Milan",
year = "2021",
abstract = "Fatigue crack growth through different welded joint regions was investigated, in terms of welded joint geometry and fatigue crack position. In the first phase of investigation, numerical simulation of crack growth in a welded joint made of steel P460NL1 was performed using extended Finite Element Methods (xFEM). Numerical models employed Paris law, using experimentally determined coefficients for each welded joint zone. Weld geometry was varied by using different heat affected zone (HAZ) widths, i.e. fatigue crack lengths. The second stage involved similar numerical models with different material (Protac 500). Fatigue lives for regions in both models were then compared.",
journal = "International Journal of Fatigue",
title = "Welded joint geometry effect on fatigue crack growth resistance in different metallic materials",
volume = "150",
doi = "10.1016/j.ijfatigue.2021.106298"
}

Sedmak, A., Hemer, A., Sedmak, S. A., Milović, L., Grbovic, A., Cabrilo, A.,& Kljajin, M.. (2021). Welded joint geometry effect on fatigue crack growth resistance in different metallic materials. in International Journal of Fatigue, 150.
https://doi.org/10.1016/j.ijfatigue.2021.106298

Sedmak A, Hemer A, Sedmak SA, Milović L, Grbovic A, Cabrilo A, Kljajin M. Welded joint geometry effect on fatigue crack growth resistance in different metallic materials. in International Journal of Fatigue. 2021;150.
doi:10.1016/j.ijfatigue.2021.106298 .

Sedmak, Aleksandar, Hemer, Abubkr, Sedmak, Simon A., Milović, Ljubica, Grbovic, Aleksandar, Cabrilo, Aleksandar, Kljajin, Milan, "Welded joint geometry effect on fatigue crack growth resistance in different metallic materials" in International Journal of Fatigue, 150 (2021),
https://doi.org/10.1016/j.ijfatigue.2021.106298 . .

TY  - JOUR
AU  - Hemer, Abubkr M.
AU  - Sedmak, Simon A.
AU  - Milović, Ljubica
AU  - Grbovic, Aleksandar
AU  - Sedmak, Aleksandar
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4753
AB  - Fatigue behaviour of welded joints is investigated, in terms of welded joint geometry and the fatigue crack position. It is based on previous work which involved numerical simulation of fatigue crack growth in a welded joint made of micro-alloyed, low-carbon pressure vessel steel P460NL1, with the main focus on fatigue crack growth rate through different welded joint regions. The goal here was to change the size of the heat affected zone, as the region in which the fatigue crack initiated, and to compare the results obtained for new crack length values with the original ones, obtained by creating numerical models based on experimental data. A number of models were created, some of which simulated the case with a bigger heat affected zone (and, consequently, a smaller crack length in the weld metal), and other which simulated the case with a smaller heat affected zone. Due to the micro-structural differences between these two welded joint regions, noticeable differences appeared in the numbers of cycles obtained for each zone with varying fatigue crack lengths, as well as in the total number of cycles for both zones through which the crack propagated.
T2  - 1st Virtual European Conference on Fracture - Vecf1
T1  - FEM simulation of welded joint geometry influence on fatigue crack growth resistance
EP  - 1832
SP  - 1827
VL  - 28
DO  - 10.1016/j.prostr.2020.11.005
ER  - 

@article{
author = "Hemer, Abubkr M. and Sedmak, Simon A. and Milović, Ljubica and Grbovic, Aleksandar and Sedmak, Aleksandar",
year = "2020",
abstract = "Fatigue behaviour of welded joints is investigated, in terms of welded joint geometry and the fatigue crack position. It is based on previous work which involved numerical simulation of fatigue crack growth in a welded joint made of micro-alloyed, low-carbon pressure vessel steel P460NL1, with the main focus on fatigue crack growth rate through different welded joint regions. The goal here was to change the size of the heat affected zone, as the region in which the fatigue crack initiated, and to compare the results obtained for new crack length values with the original ones, obtained by creating numerical models based on experimental data. A number of models were created, some of which simulated the case with a bigger heat affected zone (and, consequently, a smaller crack length in the weld metal), and other which simulated the case with a smaller heat affected zone. Due to the micro-structural differences between these two welded joint regions, noticeable differences appeared in the numbers of cycles obtained for each zone with varying fatigue crack lengths, as well as in the total number of cycles for both zones through which the crack propagated.",
journal = "1st Virtual European Conference on Fracture - Vecf1",
title = "FEM simulation of welded joint geometry influence on fatigue crack growth resistance",
pages = "1832-1827",
volume = "28",
doi = "10.1016/j.prostr.2020.11.005"
}

Hemer, A. M., Sedmak, S. A., Milović, L., Grbovic, A.,& Sedmak, A.. (2020). FEM simulation of welded joint geometry influence on fatigue crack growth resistance. in 1st Virtual European Conference on Fracture - Vecf1, 28, 1827-1832.
https://doi.org/10.1016/j.prostr.2020.11.005

Hemer AM, Sedmak SA, Milović L, Grbovic A, Sedmak A. FEM simulation of welded joint geometry influence on fatigue crack growth resistance. in 1st Virtual European Conference on Fracture - Vecf1. 2020;28:1827-1832.
doi:10.1016/j.prostr.2020.11.005 .

Hemer, Abubkr M., Sedmak, Simon A., Milović, Ljubica, Grbovic, Aleksandar, Sedmak, Aleksandar, "FEM simulation of welded joint geometry influence on fatigue crack growth resistance" in 1st Virtual European Conference on Fracture - Vecf1, 28 (2020):1827-1832,
https://doi.org/10.1016/j.prostr.2020.11.005 . .