TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Živković, Predrag M.
AU  - Branković, Goran
AU  - Pavlović, Miomir
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5818
AB  - The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of the deposits obtained in the galvanostatic regime of electrolysis. The exchange current densities for lead and zinc were estimated by comparison of experimentally obtained polarization curves with the simulated ones obtained for the different the exchange current density to the limiting diffusion current density ratios. Using this way for the estimation of the exchange current density, it is shown that the exchange current density for Pb was more than 1300 times higher than the one for Zn. In this way, it is confirmed that the Pb electrodeposition processes are considerably faster than the Zn electrodeposition processes. The difference in the rate of electrochemical processes was confirmed by a comparison of morphologies of lead and zinc deposits obtained at current densities which corresponded to 0.25 and 0.50 values of the limiting diffusion current densities.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
EP  - 550
IS  - 5
SP  - 539
VL  - 82
DO  - 10.2298/JSC161114029N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Živković, Predrag M. and Branković, Goran and Pavlović, Miomir",
year = "2017",
abstract = "The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of the deposits obtained in the galvanostatic regime of electrolysis. The exchange current densities for lead and zinc were estimated by comparison of experimentally obtained polarization curves with the simulated ones obtained for the different the exchange current density to the limiting diffusion current density ratios. Using this way for the estimation of the exchange current density, it is shown that the exchange current density for Pb was more than 1300 times higher than the one for Zn. In this way, it is confirmed that the Pb electrodeposition processes are considerably faster than the Zn electrodeposition processes. The difference in the rate of electrochemical processes was confirmed by a comparison of morphologies of lead and zinc deposits obtained at current densities which corresponded to 0.25 and 0.50 values of the limiting diffusion current densities.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits",
pages = "550-539",
number = "5",
volume = "82",
doi = "10.2298/JSC161114029N"
}

Nikolić, N. D., Živković, P. M., Branković, G.,& Pavlović, M.. (2017). Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 82(5), 539-550.
https://doi.org/10.2298/JSC161114029N

Nikolić ND, Živković PM, Branković G, Pavlović M. Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits. in Journal of the Serbian Chemical Society. 2017;82(5):539-550.
doi:10.2298/JSC161114029N .

Nikolić, Nebojša D., Živković, Predrag M., Branković, Goran, Pavlović, Miomir, "Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits" in Journal of the Serbian Chemical Society, 82, no. 5 (2017):539-550,
https://doi.org/10.2298/JSC161114029N . .

TY  - JOUR
AU  - Simović, Bojana
AU  - Poleti, Dejan
AU  - Golubović, Aleksandar
AU  - Matković, Aleksandar
AU  - Šćepanović, Maja
AU  - Babić, Biljana M.
AU  - Branković, Goran
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5817
AB  - In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , microstructural and photocatalytic properties of the unmodified and Ag modified ZnO powders have been investigated by the XRPD, FESEM, TEM, UV-vis, Raman and BET techniques. The Ag modified samples consist of ZnO nanocrystals and metallic Ag on the surface. The average crystallite size of all samples was about 20 nm. The FESEM revealed the uniformity in size and approximately spherical shape of ZnO nanopar-ticles. The BET data suggest that all prepared samples are mesoporous. All prepared samples showed higher photocatalytic efficiency in the degradation of the Reactive Orange 16 (RO16) azo dye than the commercial ZnO. In addition, Ag modified ZnO powders, especially those with 1.5 and 0.75 mol% of Ag, were more efficient than the unmodified one.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method
EP  - 38
IS  - 1
SP  - 27
VL  - 11
DO  - 10.2298/PAC1701027S
ER  - 

@article{
author = "Simović, Bojana and Poleti, Dejan and Golubović, Aleksandar and Matković, Aleksandar and Šćepanović, Maja and Babić, Biljana M. and Branković, Goran",
year = "2017",
abstract = "In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , microstructural and photocatalytic properties of the unmodified and Ag modified ZnO powders have been investigated by the XRPD, FESEM, TEM, UV-vis, Raman and BET techniques. The Ag modified samples consist of ZnO nanocrystals and metallic Ag on the surface. The average crystallite size of all samples was about 20 nm. The FESEM revealed the uniformity in size and approximately spherical shape of ZnO nanopar-ticles. The BET data suggest that all prepared samples are mesoporous. All prepared samples showed higher photocatalytic efficiency in the degradation of the Reactive Orange 16 (RO16) azo dye than the commercial ZnO. In addition, Ag modified ZnO powders, especially those with 1.5 and 0.75 mol% of Ag, were more efficient than the unmodified one.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method",
pages = "38-27",
number = "1",
volume = "11",
doi = "10.2298/PAC1701027S"
}

Simović, B., Poleti, D., Golubović, A., Matković, A., Šćepanović, M., Babić, B. M.,& Branković, G.. (2017). Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 11(1), 27-38.
https://doi.org/10.2298/PAC1701027S

Simović B, Poleti D, Golubović A, Matković A, Šćepanović M, Babić BM, Branković G. Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method. in Processing and Application of Ceramics. 2017;11(1):27-38.
doi:10.2298/PAC1701027S .

Simović, Bojana, Poleti, Dejan, Golubović, Aleksandar, Matković, Aleksandar, Šćepanović, Maja, Babić, Biljana M., Branković, Goran, "Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method" in Processing and Application of Ceramics, 11, no. 1 (2017):27-38,
https://doi.org/10.2298/PAC1701027S . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Ivanović, Evica
AU  - Branković, Goran
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5770
AB  - The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of electrodeposition strongly affected the final morphology of the Pb crystals. The formation of Pb crystals of the different shape from the same initial shape was discussed in terms of the effect of orientation of initially formed grains on the type of diffusion control. A spherical diffusion layer was formed around the tip of the hexagonal-shaped grain oriented with its tip towards the bulk solution that led to the formation of elongated crystals in the growth process. On the other hand, a cylindrical type of diffusion was responsible for the growth of hexagonal-shaped grains oriented with the lateral side towards the bulk solution. Pb crystals with well-defined sides parallel to the surface area of the macroelectrode were formed under this type of diffusion.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
EP  - 1005
IS  - 8
SP  - 993
VL  - 79
DO  - 10.2298/JSC131211006N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Ivanović, Evica and Branković, Goran",
year = "2014",
abstract = "The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of electrodeposition strongly affected the final morphology of the Pb crystals. The formation of Pb crystals of the different shape from the same initial shape was discussed in terms of the effect of orientation of initially formed grains on the type of diffusion control. A spherical diffusion layer was formed around the tip of the hexagonal-shaped grain oriented with its tip towards the bulk solution that led to the formation of elongated crystals in the growth process. On the other hand, a cylindrical type of diffusion was responsible for the growth of hexagonal-shaped grains oriented with the lateral side towards the bulk solution. Pb crystals with well-defined sides parallel to the surface area of the macroelectrode were formed under this type of diffusion.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead",
pages = "1005-993",
number = "8",
volume = "79",
doi = "10.2298/JSC131211006N"
}

Nikolić, N. D., Popov, K. I., Ivanović, E.,& Branković, G.. (2014). Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 79(8), 993-1005.
https://doi.org/10.2298/JSC131211006N

Nikolić ND, Popov KI, Ivanović E, Branković G. Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead. in Journal of the Serbian Chemical Society. 2014;79(8):993-1005.
doi:10.2298/JSC131211006N .

Nikolić, Nebojša D., Popov, Konstantin I., Ivanović, Evica, Branković, Goran, "Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead" in Journal of the Serbian Chemical Society, 79, no. 8 (2014):993-1005,
https://doi.org/10.2298/JSC131211006N . .

TY  - JOUR
AU  - Veljković, Ivana
AU  - Poleti, Dejan
AU  - Karanović, Ljiljana
AU  - Zdujić, Miodrag
AU  - Branković, Goran
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5656
AB  - Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. Structural and microstructural properties, the mechanism of solid state reaction between anatase and Li2CO3 as well as thermal stability of prepared spinel were investigated using XRPD, SEM and TG/DSC analysis. The mechanism of reaction implies decomposition of Li2CO3 below 250ºC, formation of monoclinic Li2TiO3 as intermediate product between 400 and 600°C and its transformation to Li4Ti5O12 between 600-800ºC. The spinel structure is stable up to 1000ºC when it is decomposed due to Li2O evaporation.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Solid state synthesis of extra phase-pure Li4Ti5O12 spinel
EP  - 351
IS  - 3
SP  - 343
VL  - 43
DO  - 10.2298/SOS1103343V
UR  - https://hdl.handle.net/21.15107/rcub_dais_199
ER  - 

@article{
author = "Veljković, Ivana and Poleti, Dejan and Karanović, Ljiljana and Zdujić, Miodrag and Branković, Goran",
year = "2011",
abstract = "Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. Structural and microstructural properties, the mechanism of solid state reaction between anatase and Li2CO3 as well as thermal stability of prepared spinel were investigated using XRPD, SEM and TG/DSC analysis. The mechanism of reaction implies decomposition of Li2CO3 below 250ºC, formation of monoclinic Li2TiO3 as intermediate product between 400 and 600°C and its transformation to Li4Ti5O12 between 600-800ºC. The spinel structure is stable up to 1000ºC when it is decomposed due to Li2O evaporation.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Solid state synthesis of extra phase-pure Li4Ti5O12 spinel",
pages = "351-343",
number = "3",
volume = "43",
doi = "10.2298/SOS1103343V",
url = "https://hdl.handle.net/21.15107/rcub_dais_199"
}

Veljković, I., Poleti, D., Karanović, L., Zdujić, M.,& Branković, G.. (2011). Solid state synthesis of extra phase-pure Li4Ti5O12 spinel. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 43(3), 343-351.
https://doi.org/10.2298/SOS1103343V
https://hdl.handle.net/21.15107/rcub_dais_199

Veljković I, Poleti D, Karanović L, Zdujić M, Branković G. Solid state synthesis of extra phase-pure Li4Ti5O12 spinel. in Science of Sintering. 2011;43(3):343-351.
doi:10.2298/SOS1103343V
https://hdl.handle.net/21.15107/rcub_dais_199 .

Veljković, Ivana, Poleti, Dejan, Karanović, Ljiljana, Zdujić, Miodrag, Branković, Goran, "Solid state synthesis of extra phase-pure Li4Ti5O12 spinel" in Science of Sintering, 43, no. 3 (2011):343-351,
https://doi.org/10.2298/SOS1103343V .,
https://hdl.handle.net/21.15107/rcub_dais_199 .

TY  - JOUR
AU  - Luković Golić, Danijela
AU  - Branković, Goran
AU  - Počuča-Nešić, Milica
AU  - Vojisavljević, Katarina
AU  - Recnik, Aleksander
AU  - Daneu, Nina
AU  - Bernik, Slavko
AU  - Šćepanović, Maja
AU  - Poleti, Dejan
AU  - Branković, Zorica
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5657
AB  - Zinc oxide nanopowders were synthesized by the sol-gel method from an ethanol solution of zinc acetate dihydrate. Detailed structural and microstructural investigations were carried out using x-ray diffraction, Raman spectroscopy, thermogravimetric and differential thermal analyses, as well as high-resolution transmission electron microscopy (TEM) and field-emission scanning electron microscopy. The intermediate compound of the reaction was layered zinc hydroxide acetate that further transforms into hexagonally shaped ZnO crystalline nanoplates (d(m) = 4 nm), which aggregate into larger spherical particles. According to the TEM analysis the ZnO nanoparticles were self-assembled into larger particles with the same orientation, i.e. aligned lattice planes of the particles. A further solvothermal treatment resulted in hexagonal, prismatic ZnO mesocrystals.
PB  - IOP Publishing Ltd, Bristol
T2  - Nanotechnology
T1  - Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O
IS  - 39
VL  - 22
DO  - 10.1088/0957-4484/22/39/395603
ER  - 

@article{
author = "Luković Golić, Danijela and Branković, Goran and Počuča-Nešić, Milica and Vojisavljević, Katarina and Recnik, Aleksander and Daneu, Nina and Bernik, Slavko and Šćepanović, Maja and Poleti, Dejan and Branković, Zorica",
year = "2011",
abstract = "Zinc oxide nanopowders were synthesized by the sol-gel method from an ethanol solution of zinc acetate dihydrate. Detailed structural and microstructural investigations were carried out using x-ray diffraction, Raman spectroscopy, thermogravimetric and differential thermal analyses, as well as high-resolution transmission electron microscopy (TEM) and field-emission scanning electron microscopy. The intermediate compound of the reaction was layered zinc hydroxide acetate that further transforms into hexagonally shaped ZnO crystalline nanoplates (d(m) = 4 nm), which aggregate into larger spherical particles. According to the TEM analysis the ZnO nanoparticles were self-assembled into larger particles with the same orientation, i.e. aligned lattice planes of the particles. A further solvothermal treatment resulted in hexagonal, prismatic ZnO mesocrystals.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Nanotechnology",
title = "Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O",
number = "39",
volume = "22",
doi = "10.1088/0957-4484/22/39/395603"
}

Luković Golić, D., Branković, G., Počuča-Nešić, M., Vojisavljević, K., Recnik, A., Daneu, N., Bernik, S., Šćepanović, M., Poleti, D.,& Branković, Z.. (2011). Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O. in Nanotechnology
IOP Publishing Ltd, Bristol., 22(39).
https://doi.org/10.1088/0957-4484/22/39/395603

Luković Golić D, Branković G, Počuča-Nešić M, Vojisavljević K, Recnik A, Daneu N, Bernik S, Šćepanović M, Poleti D, Branković Z. Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O. in Nanotechnology. 2011;22(39).
doi:10.1088/0957-4484/22/39/395603 .

Luković Golić, Danijela, Branković, Goran, Počuča-Nešić, Milica, Vojisavljević, Katarina, Recnik, Aleksander, Daneu, Nina, Bernik, Slavko, Šćepanović, Maja, Poleti, Dejan, Branković, Zorica, "Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O" in Nanotechnology, 22, no. 39 (2011),
https://doi.org/10.1088/0957-4484/22/39/395603 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran
AU  - Maksimović, Vesna M.
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5583
AB  - Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a strong effect on the morphology of electrodeposited copper. Honeycomb-like copper structures were formed with the pause-to-pulse ratios up to 5. Up to this value of the pause-to-pulse ratio, the diameter of the holes formed by attached hydrogen bubbles was decreasing, while their number was increasing by the application of PO regime. The compactness of the formed honeycomb-like structures was also increasing with the increasing pause duration. The increase of the pause-to-pulse ratio suppressed a coalescence of neighboring hydrogen bubbles. Copper dendrites in the interior of the holes and at their shoulders were formed with the higher pause-to-pulse ratios. The size of the formed dendrites, as well as their number, increased with the increasing pause duration. Depth of holes was decreasing with the increasing pause duration. The increased compactness of the obtained structures was explained by the use of a set of equations describing the effect of square-wave PO on electrodeposition process.
PB  - Springer, New York
T2  - Journal of Solid State Electrochemistry
T1  - Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
EP  - 338
IS  - 2
SP  - 331
VL  - 14
DO  - 10.1007/s10008-009-0842-1
ER  - 

@article{
author = "Nikolić, Nebojša D. and Branković, Goran and Maksimović, Vesna M. and Pavlović, Miomir and Popov, Konstantin I.",
year = "2010",
abstract = "Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a strong effect on the morphology of electrodeposited copper. Honeycomb-like copper structures were formed with the pause-to-pulse ratios up to 5. Up to this value of the pause-to-pulse ratio, the diameter of the holes formed by attached hydrogen bubbles was decreasing, while their number was increasing by the application of PO regime. The compactness of the formed honeycomb-like structures was also increasing with the increasing pause duration. The increase of the pause-to-pulse ratio suppressed a coalescence of neighboring hydrogen bubbles. Copper dendrites in the interior of the holes and at their shoulders were formed with the higher pause-to-pulse ratios. The size of the formed dendrites, as well as their number, increased with the increasing pause duration. Depth of holes was decreasing with the increasing pause duration. The increased compactness of the obtained structures was explained by the use of a set of equations describing the effect of square-wave PO on electrodeposition process.",
publisher = "Springer, New York",
journal = "Journal of Solid State Electrochemistry",
title = "Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition",
pages = "338-331",
number = "2",
volume = "14",
doi = "10.1007/s10008-009-0842-1"
}

Nikolić, N. D., Branković, G., Maksimović, V. M., Pavlović, M.,& Popov, K. I.. (2010). Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition. in Journal of Solid State Electrochemistry
Springer, New York., 14(2), 331-338.
https://doi.org/10.1007/s10008-009-0842-1

Nikolić ND, Branković G, Maksimović VM, Pavlović M, Popov KI. Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition. in Journal of Solid State Electrochemistry. 2010;14(2):331-338.
doi:10.1007/s10008-009-0842-1 .

Nikolić, Nebojša D., Branković, Goran, Maksimović, Vesna M., Pavlović, Miomir, Popov, Konstantin I., "Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition" in Journal of Solid State Electrochemistry, 14, no. 2 (2010):331-338,
https://doi.org/10.1007/s10008-009-0842-1 . .

TY  - JOUR
AU  - Počuča, A.
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Vasiljević-Radović, Dana
AU  - Poleti, Dejan
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5568
AB  - The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from citrate precursors. The films were deposited on Si (100) and Pt covered Si substrates [Pt (111)/Ti/SiO2/Si] Using the spin-on technique. The phase composition of the films was confirmed by X-ray powder diffraction analysis, while the microstructures were investigated by atomic force microscopy. The influence of the metal ion:citric acid:ethylene glycol ratio on the morphology of the films was investigated. After optimization of these parameters, very homogenous, uniform and crack-free LNO films were obtained.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
EP  - 303
IS  - 2
SP  - 299
VL  - 34
DO  - 10.1016/j.ceramint.2006.10.003
ER  - 

@article{
author = "Počuča, A. and Branković, Goran and Branković, Zorica and Vasiljević-Radović, Dana and Poleti, Dejan",
year = "2008",
abstract = "The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from citrate precursors. The films were deposited on Si (100) and Pt covered Si substrates [Pt (111)/Ti/SiO2/Si] Using the spin-on technique. The phase composition of the films was confirmed by X-ray powder diffraction analysis, while the microstructures were investigated by atomic force microscopy. The influence of the metal ion:citric acid:ethylene glycol ratio on the morphology of the films was investigated. After optimization of these parameters, very homogenous, uniform and crack-free LNO films were obtained.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors",
pages = "303-299",
number = "2",
volume = "34",
doi = "10.1016/j.ceramint.2006.10.003"
}

Počuča, A., Branković, G., Branković, Z., Vasiljević-Radović, D.,& Poleti, D.. (2008). Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors. in Ceramics International
Elsevier Sci Ltd, Oxford., 34(2), 299-303.
https://doi.org/10.1016/j.ceramint.2006.10.003

Počuča A, Branković G, Branković Z, Vasiljević-Radović D, Poleti D. Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors. in Ceramics International. 2008;34(2):299-303.
doi:10.1016/j.ceramint.2006.10.003 .

Počuča, A., Branković, Goran, Branković, Zorica, Vasiljević-Radović, Dana, Poleti, Dejan, "Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors" in Ceramics International, 34, no. 2 (2008):299-303,
https://doi.org/10.1016/j.ceramint.2006.10.003 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Ljubica
AU  - Branković, Goran
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5580
AB  - The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 concentrations higher than 0.15 M are unsuitable for the formation of honeycomb-like structures is shown. The range of H2SO4 concentrations enabling the formation of this type of structure was also determined. The conditions leading to the formation of the honeycomb-like structures are: electrodeposition from solutions with lower concentrations of Cu(II) ions (0.15 M CuSO4 and less) in a concentration range from 0.25 to 1.0 M H2SO4, at a temperature of 18.0±1.0°C and at overpotentials outside the plateau of the limiting diffusion current density at which hydrogen evolution is vigorous enough to change the hydrodynamic conditions in the near-electrode layer. .
AB  - Analizirana je jonska ravnoteža u sistemu CuSO4-H2SO4-H2O da bi se sistematizovali uslovi elektrohemijskog taloženja bakra koji dovode do formiranja strukture pčelinjeg saća. Pokazano je da su koncentracije CuSO4 veće od 0,15 M nepogodne za formiranje strukture pčelinjeg saća. Određen je i opseg koncentracija H2SO4 u kojem se formira ovakva struktura. Uslovi koji dovode do formiranja strukture pčelinjeg saća su: elektro- hemijsko taloženje iz rastvora sa koncentracijom Cu(II) od najviše 0,15 M i opsegom koncentracija H2SO4 od 0,25 do 1,0 M, temperature od 18,0±1,0°C, i na prenapetostima pozitivnijim od onih koji odgovaraju platou granične difuzione gustine struje, na kojima je izdvajanje vodonika dovoljno intenzivno da promeni hidrodinamičke uslove u prikatodnom sloju. .
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition
T1  - Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
EP  - 760
IS  - 7
SP  - 753
VL  - 73
DO  - 10.2298/JSC0807753N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Pavlović, Ljubica and Branković, Goran and Pavlović, Miomir and Popov, Konstantin I.",
year = "2008",
abstract = "The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 concentrations higher than 0.15 M are unsuitable for the formation of honeycomb-like structures is shown. The range of H2SO4 concentrations enabling the formation of this type of structure was also determined. The conditions leading to the formation of the honeycomb-like structures are: electrodeposition from solutions with lower concentrations of Cu(II) ions (0.15 M CuSO4 and less) in a concentration range from 0.25 to 1.0 M H2SO4, at a temperature of 18.0±1.0°C and at overpotentials outside the plateau of the limiting diffusion current density at which hydrogen evolution is vigorous enough to change the hydrodynamic conditions in the near-electrode layer. ., Analizirana je jonska ravnoteža u sistemu CuSO4-H2SO4-H2O da bi se sistematizovali uslovi elektrohemijskog taloženja bakra koji dovode do formiranja strukture pčelinjeg saća. Pokazano je da su koncentracije CuSO4 veće od 0,15 M nepogodne za formiranje strukture pčelinjeg saća. Određen je i opseg koncentracija H2SO4 u kojem se formira ovakva struktura. Uslovi koji dovode do formiranja strukture pčelinjeg saća su: elektro- hemijsko taloženje iz rastvora sa koncentracijom Cu(II) od najviše 0,15 M i opsegom koncentracija H2SO4 od 0,25 do 1,0 M, temperature od 18,0±1,0°C, i na prenapetostima pozitivnijim od onih koji odgovaraju platou granične difuzione gustine struje, na kojima je izdvajanje vodonika dovoljno intenzivno da promeni hidrodinamičke uslove u prikatodnom sloju. .",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition, Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra",
pages = "760-753",
number = "7",
volume = "73",
doi = "10.2298/JSC0807753N"
}

Nikolić, N. D., Pavlović, L., Branković, G., Pavlović, M.,& Popov, K. I.. (2008). The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 73(7), 753-760.
https://doi.org/10.2298/JSC0807753N

Nikolić ND, Pavlović L, Branković G, Pavlović M, Popov KI. The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition. in Journal of the Serbian Chemical Society. 2008;73(7):753-760.
doi:10.2298/JSC0807753N .

Nikolić, Nebojša D., Pavlović, Ljubica, Branković, Goran, Pavlović, Miomir, Popov, Konstantin I., "The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition" in Journal of the Serbian Chemical Society, 73, no. 7 (2008):753-760,
https://doi.org/10.2298/JSC0807753N . .