Vasilić, Rastko

Link to this page

Authority KeyName Variants
3ebf4eb0-1991-4843-8948-ce0ef9eabf5d
  • Vasilić, Rastko (3)
Projects
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200135 (University of Belgrade, Faculty of Technology and Metallurgy) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM)
Bilateral cooperation program between the Republic of Serbia and the Federal Republic of Germany (project years 2020−2021, project no. 22), DFG Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200053 (University of Belgrade, Institute for Multidisciplinary Research) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200146 (University of Belgrade, Faculty of Physical Chemistry)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200162 (University of Belgrade, Faculty of Physics) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200168 (University of Belgrade, Faculty of Chemistry)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200287 (Innovation Center of the Faculty of Technology and Metallurgy) RatioCAT - Rational Design of Multifunctional Electrode Interfaces for Efficient Electrocatalytic Hydrogen Production
Operational Program Research, Development and Education (European Regional Development Fund, project no. CZ.02.1.01/0.0/0.0/15_003/0000416 of the Ministry of Education, Youth and Sports of the Czech Republic)

Author's Bibliography

Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles

Mladenović, Ivana O.; Vuksanović, Marija M.; Dimitrijević, Stevan P.; Vasilić, Rastko; Radojević, Vesna J.; Vasiljević-Radović, Dana G.; Nikolić, Nebojša D.

(MDPI, 2023)

TY  - JOUR
AU  - Mladenović, Ivana O.
AU  - Vuksanović, Marija M.
AU  - Dimitrijević, Stevan P.
AU  - Vasilić, Rastko
AU  - Radojević, Vesna J.
AU  - Vasiljević-Radović, Dana G.
AU  - Nikolić, Nebojša D.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7072
AB  - Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.
PB  - MDPI
T2  - Metals
T1  - Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
IS  - 12
SP  - 1979
VL  - 13
DO  - 10.3390/met13121979
ER  - 
@article{
author = "Mladenović, Ivana O. and Vuksanović, Marija M. and Dimitrijević, Stevan P. and Vasilić, Rastko and Radojević, Vesna J. and Vasiljević-Radović, Dana G. and Nikolić, Nebojša D.",
year = "2023",
abstract = "Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.",
publisher = "MDPI",
journal = "Metals",
title = "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles",
number = "12",
pages = "1979",
volume = "13",
doi = "10.3390/met13121979"
}
Mladenović, I. O., Vuksanović, M. M., Dimitrijević, S. P., Vasilić, R., Radojević, V. J., Vasiljević-Radović, D. G.,& Nikolić, N. D.. (2023). Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals
MDPI., 13(12), 1979.
https://doi.org/10.3390/met13121979
Mladenović IO, Vuksanović MM, Dimitrijević SP, Vasilić R, Radojević VJ, Vasiljević-Radović DG, Nikolić ND. Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals. 2023;13(12):1979.
doi:10.3390/met13121979 .
Mladenović, Ivana O., Vuksanović, Marija M., Dimitrijević, Stevan P., Vasilić, Rastko, Radojević, Vesna J., Vasiljević-Radović, Dana G., Nikolić, Nebojša D., "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles" in Metals, 13, no. 12 (2023):1979,
https://doi.org/10.3390/met13121979 . .
1

Activation of Osmium by the Surface Effects of Hydrogenated TiO2 Nanotube Arrays for Enhanced Hydrogen Evolution Reaction Performance

Krstajić Pajić, Mila N.; Dobrota, Ana S.; Mazare, Anca; Đurđić, Slađana; Hwang, Imgon; Skorodumova, Natalia V.; Manojlović, Dragan; Vasilić, Rastko; Pašti, Igor A.; Schmuki, Patrik; Lačnjevac, Uroš

(American Chemical Society, 2023)

TY  - JOUR
AU  - Krstajić Pajić, Mila N.
AU  - Dobrota, Ana S.
AU  - Mazare, Anca
AU  - Đurđić, Slađana
AU  - Hwang, Imgon
AU  - Skorodumova, Natalia V.
AU  - Manojlović, Dragan
AU  - Vasilić, Rastko
AU  - Pašti, Igor A.
AU  - Schmuki, Patrik
AU  - Lačnjevac, Uroš
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6576
AB  - Efficient cathodes for the hydrogen evolution reaction (HER) in acidic water electrolysis rely on the use of expensive platinum group metals (PGMs). However, to achieve economically viable operation, both the content of PGMs must be reduced and their intrinsically strong H adsorption mitigated. Herein, we show that the surface effects of hydrogenated TiO2 nanotube (TNT) arrays can make osmium, a so far less-explored PGM, a highly active HER electrocatalyst. These defect-rich TiO2 nanostructures provide an interactive scaffold for the galvanic deposition of Os particles with modulated adsorption properties. Through systematic investigations, we identify the synthesis conditions (OsCl3 concentration/temperature/reaction time) that yield a progressive improvement in Os deposition rate and mass loading, thereby decreasing the HER overpotential. At the same time, the Os particles deposited by this procedure remain mainly sub-nanometric and entirely cover the inner tube walls. An optimally balanced Os@TNT composite prepared at 3 mM/55 °C/30 min exhibits a record low overpotential (η) of 61 mV at a current density of 100 mA cm-2, a high mass activity of 20.8 A mgOs-1 at 80 mV, and a stable performance in an acidic medium. Density functional theory calculations indicate the existence of strong interactions between the hydrogenated TiO2 surface and small Os clusters, which may weaken the Os-H* binding strength and thus boost the intrinsic HER activity of Os centers. The results presented in this study offer new directions for the fabrication of cost-effective PGM-based catalysts and a better understanding of the synergistic electronic interactions at the PGM|TiO2 interface.
PB  - American Chemical Society
T1  - Activation of Osmium by the Surface Effects of Hydrogenated TiO2 Nanotube Arrays for Enhanced Hydrogen Evolution Reaction Performance
EP  - 31469
IS  - 26
SP  - 31459
VL  - 15
DO  - 10.1021/acsami.3c04498
ER  - 
@article{
author = "Krstajić Pajić, Mila N. and Dobrota, Ana S. and Mazare, Anca and Đurđić, Slađana and Hwang, Imgon and Skorodumova, Natalia V. and Manojlović, Dragan and Vasilić, Rastko and Pašti, Igor A. and Schmuki, Patrik and Lačnjevac, Uroš",
year = "2023",
abstract = "Efficient cathodes for the hydrogen evolution reaction (HER) in acidic water electrolysis rely on the use of expensive platinum group metals (PGMs). However, to achieve economically viable operation, both the content of PGMs must be reduced and their intrinsically strong H adsorption mitigated. Herein, we show that the surface effects of hydrogenated TiO2 nanotube (TNT) arrays can make osmium, a so far less-explored PGM, a highly active HER electrocatalyst. These defect-rich TiO2 nanostructures provide an interactive scaffold for the galvanic deposition of Os particles with modulated adsorption properties. Through systematic investigations, we identify the synthesis conditions (OsCl3 concentration/temperature/reaction time) that yield a progressive improvement in Os deposition rate and mass loading, thereby decreasing the HER overpotential. At the same time, the Os particles deposited by this procedure remain mainly sub-nanometric and entirely cover the inner tube walls. An optimally balanced Os@TNT composite prepared at 3 mM/55 °C/30 min exhibits a record low overpotential (η) of 61 mV at a current density of 100 mA cm-2, a high mass activity of 20.8 A mgOs-1 at 80 mV, and a stable performance in an acidic medium. Density functional theory calculations indicate the existence of strong interactions between the hydrogenated TiO2 surface and small Os clusters, which may weaken the Os-H* binding strength and thus boost the intrinsic HER activity of Os centers. The results presented in this study offer new directions for the fabrication of cost-effective PGM-based catalysts and a better understanding of the synergistic electronic interactions at the PGM|TiO2 interface.",
publisher = "American Chemical Society",
title = "Activation of Osmium by the Surface Effects of Hydrogenated TiO2 Nanotube Arrays for Enhanced Hydrogen Evolution Reaction Performance",
pages = "31469-31459",
number = "26",
volume = "15",
doi = "10.1021/acsami.3c04498"
}
Krstajić Pajić, M. N., Dobrota, A. S., Mazare, A., Đurđić, S., Hwang, I., Skorodumova, N. V., Manojlović, D., Vasilić, R., Pašti, I. A., Schmuki, P.,& Lačnjevac, U.. (2023). Activation of Osmium by the Surface Effects of Hydrogenated TiO2 Nanotube Arrays for Enhanced Hydrogen Evolution Reaction Performance. 
American Chemical Society., 15(26), 31459-31469.
https://doi.org/10.1021/acsami.3c04498
Krstajić Pajić MN, Dobrota AS, Mazare A, Đurđić S, Hwang I, Skorodumova NV, Manojlović D, Vasilić R, Pašti IA, Schmuki P, Lačnjevac U. Activation of Osmium by the Surface Effects of Hydrogenated TiO2 Nanotube Arrays for Enhanced Hydrogen Evolution Reaction Performance. 2023;15(26):31459-31469.
doi:10.1021/acsami.3c04498 .
Krstajić Pajić, Mila N., Dobrota, Ana S., Mazare, Anca, Đurđić, Slađana, Hwang, Imgon, Skorodumova, Natalia V., Manojlović, Dragan, Vasilić, Rastko, Pašti, Igor A., Schmuki, Patrik, Lačnjevac, Uroš, "Activation of Osmium by the Surface Effects of Hydrogenated TiO2 Nanotube Arrays for Enhanced Hydrogen Evolution Reaction Performance", 15, no. 26 (2023):31459-31469,
https://doi.org/10.1021/acsami.3c04498 . .
2
2

Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes

Mladenović, Ivana O.; Lamovec, Jelena S.; Vasiljević-Radović, Dana G.; Vasilić, Rastko; Radojević, Vesna; Nikolić, Nebojša D.

(2021)

TY  - JOUR
AU  - Mladenović, Ivana O.
AU  - Lamovec, Jelena S.
AU  - Vasiljević-Radović, Dana G.
AU  - Vasilić, Rastko
AU  - Radojević, Vesna
AU  - Nikolić, Nebojša D.
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4816
AB  - The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. Morphology and structure of the coatings were analyzed by scanning electron microscope (SEM), atomic force microscope (AFM) and X-ray diffraction (XRD), while coating hardness was examined by Vickers microindentation test applying the Chicot-Lesage (C-L) composite hardness model. Depending on the conditions of electrolysis, two types of Cu coatings were obtained: fine-grained mat coatings with a strong (220) preferred orientation from the sulfate electrolyte and smooth mirror bright coatings with a strong (200) preferred orientation from the electrolyte with added leveling/brightening additives. The mat coatings showed larger both measured composite and calculated coating hardness than the mirror bright coatings, that can be explained by the phenomena on boundary among grains. Independent of electrolysis conditions, the critical relative indentation depth (RID) of 0.14 was established for all types of the Cu coatings, separating the zone in which the composite hardness can be equaled with the coating hardness and the zone requiring an application of the C-L model for a determination of the absolute hardness of the Cu coatings.
T2  - Metals
T1  - Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
IS  - 11
VL  - 11
DO  - 10.3390/met11111807
ER  - 
@article{
author = "Mladenović, Ivana O. and Lamovec, Jelena S. and Vasiljević-Radović, Dana G. and Vasilić, Rastko and Radojević, Vesna and Nikolić, Nebojša D.",
year = "2021",
abstract = "The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. Morphology and structure of the coatings were analyzed by scanning electron microscope (SEM), atomic force microscope (AFM) and X-ray diffraction (XRD), while coating hardness was examined by Vickers microindentation test applying the Chicot-Lesage (C-L) composite hardness model. Depending on the conditions of electrolysis, two types of Cu coatings were obtained: fine-grained mat coatings with a strong (220) preferred orientation from the sulfate electrolyte and smooth mirror bright coatings with a strong (200) preferred orientation from the electrolyte with added leveling/brightening additives. The mat coatings showed larger both measured composite and calculated coating hardness than the mirror bright coatings, that can be explained by the phenomena on boundary among grains. Independent of electrolysis conditions, the critical relative indentation depth (RID) of 0.14 was established for all types of the Cu coatings, separating the zone in which the composite hardness can be equaled with the coating hardness and the zone requiring an application of the C-L model for a determination of the absolute hardness of the Cu coatings.",
journal = "Metals",
title = "Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes",
number = "11",
volume = "11",
doi = "10.3390/met11111807"
}
Mladenović, I. O., Lamovec, J. S., Vasiljević-Radović, D. G., Vasilić, R., Radojević, V.,& Nikolić, N. D.. (2021). Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes. in Metals, 11(11).
https://doi.org/10.3390/met11111807
Mladenović IO, Lamovec JS, Vasiljević-Radović DG, Vasilić R, Radojević V, Nikolić ND. Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes. in Metals. 2021;11(11).
doi:10.3390/met11111807 .
Mladenović, Ivana O., Lamovec, Jelena S., Vasiljević-Radović, Dana G., Vasilić, Rastko, Radojević, Vesna, Nikolić, Nebojša D., "Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes" in Metals, 11, no. 11 (2021),
https://doi.org/10.3390/met11111807 . .
6
6