TY  - JOUR
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Milović, Miloš
AU  - Cvjetićanin, Nikola
AU  - Jokić, Bojan
AU  - Umićević, Ana
AU  - Uskoković, Dragan
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5856
AB  - Low intrinsic electronic conductivity is the main disadvantage of LiFePO4 when used as a cathode material in lithium ion batteries. The paper offers experimental proofs of the theoretical prediction that fluorine doping of LiFePO4 can enhance its electrical conductivity. The LiFePO4 and fluorine-doped LiFePO4 olivine type, carbon-free powders are synthesized and examined. The crystal structure refinements in the Pnma space group reveal that doping with fluorine ions preserves the olivine structure, while reducing both the lattice parameters and the antisite defect, and increasing the crystallite size. A small amount of incorporated fluorine enhances the electrical conductivity from 4.6×10−7 S cm−1 to 2.3×10−6 S cm−1 and has a positive impact on the electrochemical performance. Several spectroscopy techniques (Mössbauer, FTIR, and Raman) reveal differences between the two powders and additionally support the findings of both the Rietveld refinement and the conductivity measurements.
PB  - Elsevier
T2  - Ceramics International
T1  - The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder
EP  - 3230
IS  - 3
SP  - 3224
VL  - 43
DO  - 10.1016/j.ceramint.2016.11.149
UR  - https://hdl.handle.net/21.15107/rcub_dais_2352
ER  - 

@article{
author = "Jugović, Dragana and Mitrić, Miodrag and Milović, Miloš and Cvjetićanin, Nikola and Jokić, Bojan and Umićević, Ana and Uskoković, Dragan",
year = "2017",
abstract = "Low intrinsic electronic conductivity is the main disadvantage of LiFePO4 when used as a cathode material in lithium ion batteries. The paper offers experimental proofs of the theoretical prediction that fluorine doping of LiFePO4 can enhance its electrical conductivity. The LiFePO4 and fluorine-doped LiFePO4 olivine type, carbon-free powders are synthesized and examined. The crystal structure refinements in the Pnma space group reveal that doping with fluorine ions preserves the olivine structure, while reducing both the lattice parameters and the antisite defect, and increasing the crystallite size. A small amount of incorporated fluorine enhances the electrical conductivity from 4.6×10−7 S cm−1 to 2.3×10−6 S cm−1 and has a positive impact on the electrochemical performance. Several spectroscopy techniques (Mössbauer, FTIR, and Raman) reveal differences between the two powders and additionally support the findings of both the Rietveld refinement and the conductivity measurements.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder",
pages = "3230-3224",
number = "3",
volume = "43",
doi = "10.1016/j.ceramint.2016.11.149",
url = "https://hdl.handle.net/21.15107/rcub_dais_2352"
}

Jugović, D., Mitrić, M., Milović, M., Cvjetićanin, N., Jokić, B., Umićević, A.,& Uskoković, D.. (2017). The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder. in Ceramics International
Elsevier., 43(3), 3224-3230.
https://doi.org/10.1016/j.ceramint.2016.11.149
https://hdl.handle.net/21.15107/rcub_dais_2352

Jugović D, Mitrić M, Milović M, Cvjetićanin N, Jokić B, Umićević A, Uskoković D. The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder. in Ceramics International. 2017;43(3):3224-3230.
doi:10.1016/j.ceramint.2016.11.149
https://hdl.handle.net/21.15107/rcub_dais_2352 .

Jugović, Dragana, Mitrić, Miodrag, Milović, Miloš, Cvjetićanin, Nikola, Jokić, Bojan, Umićević, Ana, Uskoković, Dragan, "The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder" in Ceramics International, 43, no. 3 (2017):3224-3230,
https://doi.org/10.1016/j.ceramint.2016.11.149 .,
https://hdl.handle.net/21.15107/rcub_dais_2352 .

TY  - JOUR
AU  - Kuzmanović, Maja
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Jokić, Bojan
AU  - Cvjetićanin, Nikola
AU  - Uskoković, Dragan
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5807
AB  - Olivine-type LiFePO4 composite powders with carbon were synthesized by freeze drying and subsequent thermal annealing. The main purpose of the research is to explore how various dicarboxylic acids as carbon sources influence the electrochemical properties of the resulting composites. Three dicarboxylic acids (oxalic, malonic, and adipic) were used as a carbon source. The synthesis was followed by X-ray powder diffraction, scanning electron microscopy, particle-size analysis, and electrochemical experiments. It is shown that the amount of the in situ formed carbon depends on the thermal behaviour of the acids in inert atmosphere rather than on their carbon content. Cyclic voltammetry experiments and galvanostatic cycling illustrate the behaviour of different powders: the powder obtained with oxalic acid yields the highest discharge capacity at small currents, while the one obtained with adipic acid shows better high-current response. Malonic acid has turned out to be a poor carbon source and it consequently yields powder with poor electrochemical performance. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
PB  - Elsevier Ltd.
T2  - Ceramics International
T1  - The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite
EP  - 6758
IS  - 5
SP  - 6753
VL  - 41
DO  - 10.1016/j.ceramint.2015.01.121
UR  - https://hdl.handle.net/21.15107/rcub_dais_2590
ER  - 

@article{
author = "Kuzmanović, Maja and Jugović, Dragana and Mitrić, Miodrag and Jokić, Bojan and Cvjetićanin, Nikola and Uskoković, Dragan",
year = "2015",
abstract = "Olivine-type LiFePO4 composite powders with carbon were synthesized by freeze drying and subsequent thermal annealing. The main purpose of the research is to explore how various dicarboxylic acids as carbon sources influence the electrochemical properties of the resulting composites. Three dicarboxylic acids (oxalic, malonic, and adipic) were used as a carbon source. The synthesis was followed by X-ray powder diffraction, scanning electron microscopy, particle-size analysis, and electrochemical experiments. It is shown that the amount of the in situ formed carbon depends on the thermal behaviour of the acids in inert atmosphere rather than on their carbon content. Cyclic voltammetry experiments and galvanostatic cycling illustrate the behaviour of different powders: the powder obtained with oxalic acid yields the highest discharge capacity at small currents, while the one obtained with adipic acid shows better high-current response. Malonic acid has turned out to be a poor carbon source and it consequently yields powder with poor electrochemical performance. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
publisher = "Elsevier Ltd.",
journal = "Ceramics International",
title = "The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite",
pages = "6758-6753",
number = "5",
volume = "41",
doi = "10.1016/j.ceramint.2015.01.121",
url = "https://hdl.handle.net/21.15107/rcub_dais_2590"
}

Kuzmanović, M., Jugović, D., Mitrić, M., Jokić, B., Cvjetićanin, N.,& Uskoković, D.. (2015). The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite. in Ceramics International
Elsevier Ltd.., 41(5), 6753-6758.
https://doi.org/10.1016/j.ceramint.2015.01.121
https://hdl.handle.net/21.15107/rcub_dais_2590

Kuzmanović M, Jugović D, Mitrić M, Jokić B, Cvjetićanin N, Uskoković D. The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite. in Ceramics International. 2015;41(5):6753-6758.
doi:10.1016/j.ceramint.2015.01.121
https://hdl.handle.net/21.15107/rcub_dais_2590 .

Kuzmanović, Maja, Jugović, Dragana, Mitrić, Miodrag, Jokić, Bojan, Cvjetićanin, Nikola, Uskoković, Dragan, "The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite" in Ceramics International, 41, no. 5 (2015):6753-6758,
https://doi.org/10.1016/j.ceramint.2015.01.121 .,
https://hdl.handle.net/21.15107/rcub_dais_2590 .