TY  - JOUR
AU  - Ćujić, Mirjana
AU  - Ćirović, Željko
AU  - Đolić, Maja
AU  - Janković-Mandić, Ljiljana
AU  - Radenković, Mirjana
AU  - Onjia, Antonije
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6528
AB  - The health effects attributed to exposure to ambient PM2.5 concentrations
above 10 μg/m3
by using the AirQ+ modeling software were assessed. The
hourly concentrations of PM2.5 were collected from 13 air pollution
monitoring stations in the Belgrade district during Jun and July 2021.,
which were further used as input data for the AirQ+
software. The average
concentration of PM2.5 for two-month monitoring from all sampling sites in
the city was 14.8 μg/m3
, the maximum daily concentration was 55.7 μg/m3
,
while the maximum concentration per hour was 365 μg/m3
. The spatial
distribution of concentrations was mapped using geostatistical interpolation,
revealing hotspots within the city centre and industrial area of the district.
The burden of disease, such as stroke, ischemic heart disease (IHD), chronic
obstructive pulmonary disease (COPD) and lung cancer (LC), due to the
ambient PM2.5 pollution was evaluated according to the WHO methodology
for health risk assessment of air pollution. The model used for this
assessment is based on the attributable proportion defined as the section of
the health effect related to exposure to air pollution in an at-risk population.
The estimated attributable proportion was 19.4% for stroke, 27.2% for IHD,
15.3% for COPD and 9.0% for LC. The estimated number of attributable
cases per 100,000 population at risk, due to PM2.5 air pollution, for stroke,
IHD, COPD, and LC, was 28, 34, 15, and 8, respectively.
PB  - VINČA Institute of Nuclear Sciences
T2  - Thermal Science
T1  - Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district
EP  - 2273
IS  - 3
SP  - 2265
VL  - 27
DO  - 10.2298/TSCI220131104C
ER  - 

@article{
author = "Ćujić, Mirjana and Ćirović, Željko and Đolić, Maja and Janković-Mandić, Ljiljana and Radenković, Mirjana and Onjia, Antonije",
year = "2023",
abstract = "The health effects attributed to exposure to ambient PM2.5 concentrations
above 10 μg/m3
by using the AirQ+ modeling software were assessed. The
hourly concentrations of PM2.5 were collected from 13 air pollution
monitoring stations in the Belgrade district during Jun and July 2021.,
which were further used as input data for the AirQ+
software. The average
concentration of PM2.5 for two-month monitoring from all sampling sites in
the city was 14.8 μg/m3
, the maximum daily concentration was 55.7 μg/m3
,
while the maximum concentration per hour was 365 μg/m3
. The spatial
distribution of concentrations was mapped using geostatistical interpolation,
revealing hotspots within the city centre and industrial area of the district.
The burden of disease, such as stroke, ischemic heart disease (IHD), chronic
obstructive pulmonary disease (COPD) and lung cancer (LC), due to the
ambient PM2.5 pollution was evaluated according to the WHO methodology
for health risk assessment of air pollution. The model used for this
assessment is based on the attributable proportion defined as the section of
the health effect related to exposure to air pollution in an at-risk population.
The estimated attributable proportion was 19.4% for stroke, 27.2% for IHD,
15.3% for COPD and 9.0% for LC. The estimated number of attributable
cases per 100,000 population at risk, due to PM2.5 air pollution, for stroke,
IHD, COPD, and LC, was 28, 34, 15, and 8, respectively.",
publisher = "VINČA Institute of Nuclear Sciences",
journal = "Thermal Science",
title = "Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district",
pages = "2273-2265",
number = "3",
volume = "27",
doi = "10.2298/TSCI220131104C"
}

Ćujić, M., Ćirović, Ž., Đolić, M., Janković-Mandić, L., Radenković, M.,& Onjia, A.. (2023). Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district. in Thermal Science
VINČA Institute of Nuclear Sciences., 27(3), 2265-2273.
https://doi.org/10.2298/TSCI220131104C

Ćujić M, Ćirović Ž, Đolić M, Janković-Mandić L, Radenković M, Onjia A. Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district. in Thermal Science. 2023;27(3):2265-2273.
doi:10.2298/TSCI220131104C .

Ćujić, Mirjana, Ćirović, Željko, Đolić, Maja, Janković-Mandić, Ljiljana, Radenković, Mirjana, Onjia, Antonije, "Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district" in Thermal Science, 27, no. 3 (2023):2265-2273,
https://doi.org/10.2298/TSCI220131104C . .

TY  - CONF
AU  - Stanišić, Tijana
AU  - Đolić, Maja
AU  - Ćujić, Mirjana
AU  - Ristić, Mirjana
AU  - Perić-Grujić, Aleksandra
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6313
AB  - Olovo i arsen predstavljaju značajnu grupu neorganskih polutanata koji su prisutni u
životnoj sredini, pre svega u vodenim sistemima, pa je njihovo uklanjanje veliki tehničkotehnološki izazov. Zbog toga se sve više pažnje posvećuje razvoju pristupačnih, efikasnih i
ekološki prihvatljivih adsorbenata. Prirodni materijali na bazi oksida metala (SiO2, Al2O3,
Fe2O3), poput ilovače, predstavljaju efikasne adsorbente za uklanjanje katjonskih i anjonskih
vrsta iz vodenih rastvora. U ovom radu adsorpciona svojstva ilovače ispitivana su u šaržnom
sistemu, promenom pH vrednosti početnog rastvora, dok su masa adsorbenta, vreme i
temperature procesa bili konstantni. Značajnu ulogu u odvijanju adsorpcionog procesa ima pH
vrednost rastvora, stoga se eksperiment zasnivao na određivanju efikasnosti procesa pri vrednosti
pH rastvora 4, 5 i 6. Strukturne karakteristike ilovače su određene primenom rendgenske
difrakcione analize (engl. X-Ray Difraction, XRD), infracrvenom spektroskopijom sa Furijeovom
transformacijom (engl. Fourier-Transform Infrared Spectroscopy, FTIR) i skenirajuće elektronske
mikroskopije (engl. Scanning electron microscopy, SEM). Koncentracija jona nakon procesa
adsorpcije određena je pomoću indukovano spregnute plazme sa masenom spektrometrijom (engl.
Inductively Coupled Plasma Mass Spectrometry, ICP-MS). Maksimalna efikasnost uklanjanja
jona olova postignuta je na pH vrednosti 5 (94,2 %), dok je za jone arsena optimalna pH vrednost
bila 6 (35,1 %).
AB  - Lead and arsenic represent an important group of inorganic pollutants that can be found in the environment, primarily in aquatic systems. Their removal from water systems is a big environmental problem, but also a significant technological challenge. Therefore, an increasing attention is paid to the development of widely available, efficient and environmentally friendly adsorbents. Natural metal oxide-based materials (SiO2, Al2O3, Fe2O3), such as loam, are effective adsorbents for removal of cationic and anionic species. The adsorption experiments were performed in a batch system, varying the pH value of the initial solution, while the mass of adsorbent, time and temperature were constant. The influence of pH value has a leading influence to the adsorption process so the process efficiency was determined at the pH values set at: 4, 5 and 6. The structural characteristics of the loam was performed using X-ray diffraction analysis (XRD), Fourier-Transform Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM). The concentration of ions after their removal was determined using inductively coupled plasma mass spectrometry (ICP-MS). The maximum removal of lead ions was obtained at pH 5 (94.2%), while for arsenic ions, it was at pH 6 (35.1%).
PB  - Akademija tehničkih strukovnih studija Beograd
C3  - 6. Naučno-stručni skup Politehnika, Zbornik radova
T1  - Ispitivanje adsorpcionih svojstava ilovače za uklanjanje jona olova i arsena iz vodenih rastvora
EP  - 148
SP  - 143
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6313
ER  - 

@conference{
author = "Stanišić, Tijana and Đolić, Maja and Ćujić, Mirjana and Ristić, Mirjana and Perić-Grujić, Aleksandra",
year = "2021",
abstract = "Olovo i arsen predstavljaju značajnu grupu neorganskih polutanata koji su prisutni u
životnoj sredini, pre svega u vodenim sistemima, pa je njihovo uklanjanje veliki tehničkotehnološki izazov. Zbog toga se sve više pažnje posvećuje razvoju pristupačnih, efikasnih i
ekološki prihvatljivih adsorbenata. Prirodni materijali na bazi oksida metala (SiO2, Al2O3,
Fe2O3), poput ilovače, predstavljaju efikasne adsorbente za uklanjanje katjonskih i anjonskih
vrsta iz vodenih rastvora. U ovom radu adsorpciona svojstva ilovače ispitivana su u šaržnom
sistemu, promenom pH vrednosti početnog rastvora, dok su masa adsorbenta, vreme i
temperature procesa bili konstantni. Značajnu ulogu u odvijanju adsorpcionog procesa ima pH
vrednost rastvora, stoga se eksperiment zasnivao na određivanju efikasnosti procesa pri vrednosti
pH rastvora 4, 5 i 6. Strukturne karakteristike ilovače su određene primenom rendgenske
difrakcione analize (engl. X-Ray Difraction, XRD), infracrvenom spektroskopijom sa Furijeovom
transformacijom (engl. Fourier-Transform Infrared Spectroscopy, FTIR) i skenirajuće elektronske
mikroskopije (engl. Scanning electron microscopy, SEM). Koncentracija jona nakon procesa
adsorpcije određena je pomoću indukovano spregnute plazme sa masenom spektrometrijom (engl.
Inductively Coupled Plasma Mass Spectrometry, ICP-MS). Maksimalna efikasnost uklanjanja
jona olova postignuta je na pH vrednosti 5 (94,2 %), dok je za jone arsena optimalna pH vrednost
bila 6 (35,1 %)., Lead and arsenic represent an important group of inorganic pollutants that can be found in the environment, primarily in aquatic systems. Their removal from water systems is a big environmental problem, but also a significant technological challenge. Therefore, an increasing attention is paid to the development of widely available, efficient and environmentally friendly adsorbents. Natural metal oxide-based materials (SiO2, Al2O3, Fe2O3), such as loam, are effective adsorbents for removal of cationic and anionic species. The adsorption experiments were performed in a batch system, varying the pH value of the initial solution, while the mass of adsorbent, time and temperature were constant. The influence of pH value has a leading influence to the adsorption process so the process efficiency was determined at the pH values set at: 4, 5 and 6. The structural characteristics of the loam was performed using X-ray diffraction analysis (XRD), Fourier-Transform Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM). The concentration of ions after their removal was determined using inductively coupled plasma mass spectrometry (ICP-MS). The maximum removal of lead ions was obtained at pH 5 (94.2%), while for arsenic ions, it was at pH 6 (35.1%).",
publisher = "Akademija tehničkih strukovnih studija Beograd",
journal = "6. Naučno-stručni skup Politehnika, Zbornik radova",
title = "Ispitivanje adsorpcionih svojstava ilovače za uklanjanje jona olova i arsena iz vodenih rastvora",
pages = "148-143",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6313"
}

Stanišić, T., Đolić, M., Ćujić, M., Ristić, M.,& Perić-Grujić, A.. (2021). Ispitivanje adsorpcionih svojstava ilovače za uklanjanje jona olova i arsena iz vodenih rastvora. in 6. Naučno-stručni skup Politehnika, Zbornik radova
Akademija tehničkih strukovnih studija Beograd., 143-148.
https://hdl.handle.net/21.15107/rcub_technorep_6313

Stanišić T, Đolić M, Ćujić M, Ristić M, Perić-Grujić A. Ispitivanje adsorpcionih svojstava ilovače za uklanjanje jona olova i arsena iz vodenih rastvora. in 6. Naučno-stručni skup Politehnika, Zbornik radova. 2021;:143-148.
https://hdl.handle.net/21.15107/rcub_technorep_6313 .

Stanišić, Tijana, Đolić, Maja, Ćujić, Mirjana, Ristić, Mirjana, Perić-Grujić, Aleksandra, "Ispitivanje adsorpcionih svojstava ilovače za uklanjanje jona olova i arsena iz vodenih rastvora" in 6. Naučno-stručni skup Politehnika, Zbornik radova (2021):143-148,
https://hdl.handle.net/21.15107/rcub_technorep_6313 .