TY  - PAT
AU  - Mijin, Dušan
AU  - Svetozarević, Milica
AU  - Šekuljica, Nataša
AU  - Knežević-Jugović, Zorica
AU  - Dajić, Ana
AU  - Mihajlović, Marina
AU  - Jovanović, Mića
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6660
AB  - Predmetni pronalazak se odnosi na postupak biodegradacije antrahinonske boje Acid Violet 109 peroksidazom, izolovanom iz poljoprivrednog otpada u kontinualnom mikroreaktorskom sistemu. Postupak se sastoji od ekstrakcije enzima i biodegradacije boje u mikroreaktoru. Koncentracija boje treba da bude do 450 mg/L, enzimski ekstrakt aktivnosti 1 U/mL i vodonik-peroksid koncentracije do 1 mM, da bi se postigao najveći stepen biodegradacije. Na ovaj način dobija se visoko efikasan postupak biodegradacije antrahinonskih boja (~97 %) koji je održiv, ekološki i ekonomski opravdan.
AB  - The present invention relates to a method for anthraquinone dye Acid Violet 109 biodegradation using peroxidase, isolated from agro-industrial waste in continuous microreactor system. The method consists of enzyme extraction and dye biodegradation in microreactor. Dye concentration should be up to 450 mg/L, enzyme extract with the activity of 1 U/mL and hydrogen peroxide concentration up to 1 mM, in order to achieve the highest level of biodegradation. In this way highly efficient method for anthraquinone dyes biodegradation is obtained (~97 %) which is sustainable, ecologically and economically justified.
PB  - Zavod za intelektualnu svojinu Republike Srbije
T2  - Glasnik intelektualne svojine
T1  - Novi postupak za biodegradaciju antrahinonskih boja u kontinualnom mikroreaktorskom sistemu peroksidazom izolovanom iz poljoprivrednog otpada
T1  - New method for anthraquinone dyes' biodegradation in continuous microreactor using peroxidase from agro-industrial waste
SP  - 22
VL  - 5
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6660
ER  - 

@misc{
author = "Mijin, Dušan and Svetozarević, Milica and Šekuljica, Nataša and Knežević-Jugović, Zorica and Dajić, Ana and Mihajlović, Marina and Jovanović, Mića",
year = "2023",
abstract = "Predmetni pronalazak se odnosi na postupak biodegradacije antrahinonske boje Acid Violet 109 peroksidazom, izolovanom iz poljoprivrednog otpada u kontinualnom mikroreaktorskom sistemu. Postupak se sastoji od ekstrakcije enzima i biodegradacije boje u mikroreaktoru. Koncentracija boje treba da bude do 450 mg/L, enzimski ekstrakt aktivnosti 1 U/mL i vodonik-peroksid koncentracije do 1 mM, da bi se postigao najveći stepen biodegradacije. Na ovaj način dobija se visoko efikasan postupak biodegradacije antrahinonskih boja (~97 %) koji je održiv, ekološki i ekonomski opravdan., The present invention relates to a method for anthraquinone dye Acid Violet 109 biodegradation using peroxidase, isolated from agro-industrial waste in continuous microreactor system. The method consists of enzyme extraction and dye biodegradation in microreactor. Dye concentration should be up to 450 mg/L, enzyme extract with the activity of 1 U/mL and hydrogen peroxide concentration up to 1 mM, in order to achieve the highest level of biodegradation. In this way highly efficient method for anthraquinone dyes biodegradation is obtained (~97 %) which is sustainable, ecologically and economically justified.",
publisher = "Zavod za intelektualnu svojinu Republike Srbije",
journal = "Glasnik intelektualne svojine",
title = "Novi postupak za biodegradaciju antrahinonskih boja u kontinualnom mikroreaktorskom sistemu peroksidazom izolovanom iz poljoprivrednog otpada, New method for anthraquinone dyes' biodegradation in continuous microreactor using peroxidase from agro-industrial waste",
pages = "22",
volume = "5",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6660"
}

Mijin, D., Svetozarević, M., Šekuljica, N., Knežević-Jugović, Z., Dajić, A., Mihajlović, M.,& Jovanović, M.. (2023). Novi postupak za biodegradaciju antrahinonskih boja u kontinualnom mikroreaktorskom sistemu peroksidazom izolovanom iz poljoprivrednog otpada. in Glasnik intelektualne svojine
Zavod za intelektualnu svojinu Republike Srbije., 5, 22.
https://hdl.handle.net/21.15107/rcub_technorep_6660

Mijin D, Svetozarević M, Šekuljica N, Knežević-Jugović Z, Dajić A, Mihajlović M, Jovanović M. Novi postupak za biodegradaciju antrahinonskih boja u kontinualnom mikroreaktorskom sistemu peroksidazom izolovanom iz poljoprivrednog otpada. in Glasnik intelektualne svojine. 2023;5:22.
https://hdl.handle.net/21.15107/rcub_technorep_6660 .

Mijin, Dušan, Svetozarević, Milica, Šekuljica, Nataša, Knežević-Jugović, Zorica, Dajić, Ana, Mihajlović, Marina, Jovanović, Mića, "Novi postupak za biodegradaciju antrahinonskih boja u kontinualnom mikroreaktorskom sistemu peroksidazom izolovanom iz poljoprivrednog otpada" in Glasnik intelektualne svojine, 5 (2023):22,
https://hdl.handle.net/21.15107/rcub_technorep_6660 .

TY  - CONF
AU  - Tadić, Julijana
AU  - Svetozarević, Milica
AU  - Dajić, Ana
AU  - Mihajlović, Marina
AU  - Jovanović, Mića
AU  - Mijin, Dušan
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6909
AB  - Aromatic heterocyclic compounds containing nitrogen in their structure have attracted
considerable interest in medicine, because of their certain pharmacological properties
including anticancer, anti-inflammatory, antihypertensive, antibacterial, antifungal and
antiviral activities. Among them, derivatives with 2-pyridone moiety are particularly
notable due to their wide application in pharmacological and dye industry. A usual
procedure for synthesis of 2-pyridone moiety is classic condensation reaction of 1,3-
dicarbonyl compounds with cyanoacetamide. However, in the case of various
substituted reactants, drawback of this reaction can be a low yield of desirable products
and long reaction time. This factor has led to the development of different methods for
synthesis in order to overcome these defects. The microreactor technology and flow
chemistry could play a significant role in the improving of organic synthesis efficiency.
The microreactor approach could provide enhanced productivity, fast conversion and
altogether less hazardous chemical synthesis. Furthermore, it pushes towards designing
of chemistry with a lower environmental and economic impact. In this study the
synthesis of 2-pyridone moiety in a continuous flow coil-type microreactor system was
examined. In order to optimize reaction conditions, flow rates of starting reagents were
varied. The desirable 2-pyridone was obtained in satisfactory yield of circa 60% in less
than 10 minutes. The structure and purity of synthetized 2-pyridone moiety were
confirmed by melting point, FT-IR, 1
H NMR and UV-Vis spectra. The efficiency of the
presented method for the synthesis of 2-pyridone based molecules has promising scaleup potential.
PB  - Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS
C3  - Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia
T1  - Development of Green Chemical Process: The Reaction of Condensation in a Continuous Flow Microreactor System
EP  - 133
SP  - 129
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6909
ER  - 

@conference{
author = "Tadić, Julijana and Svetozarević, Milica and Dajić, Ana and Mihajlović, Marina and Jovanović, Mića and Mijin, Dušan",
year = "2019",
abstract = "Aromatic heterocyclic compounds containing nitrogen in their structure have attracted
considerable interest in medicine, because of their certain pharmacological properties
including anticancer, anti-inflammatory, antihypertensive, antibacterial, antifungal and
antiviral activities. Among them, derivatives with 2-pyridone moiety are particularly
notable due to their wide application in pharmacological and dye industry. A usual
procedure for synthesis of 2-pyridone moiety is classic condensation reaction of 1,3-
dicarbonyl compounds with cyanoacetamide. However, in the case of various
substituted reactants, drawback of this reaction can be a low yield of desirable products
and long reaction time. This factor has led to the development of different methods for
synthesis in order to overcome these defects. The microreactor technology and flow
chemistry could play a significant role in the improving of organic synthesis efficiency.
The microreactor approach could provide enhanced productivity, fast conversion and
altogether less hazardous chemical synthesis. Furthermore, it pushes towards designing
of chemistry with a lower environmental and economic impact. In this study the
synthesis of 2-pyridone moiety in a continuous flow coil-type microreactor system was
examined. In order to optimize reaction conditions, flow rates of starting reagents were
varied. The desirable 2-pyridone was obtained in satisfactory yield of circa 60% in less
than 10 minutes. The structure and purity of synthetized 2-pyridone moiety were
confirmed by melting point, FT-IR, 1
H NMR and UV-Vis spectra. The efficiency of the
presented method for the synthesis of 2-pyridone based molecules has promising scaleup potential.",
publisher = "Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS",
journal = "Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia",
title = "Development of Green Chemical Process: The Reaction of Condensation in a Continuous Flow Microreactor System",
pages = "133-129",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6909"
}

Tadić, J., Svetozarević, M., Dajić, A., Mihajlović, M., Jovanović, M.,& Mijin, D.. (2019). Development of Green Chemical Process: The Reaction of Condensation in a Continuous Flow Microreactor System. in Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia
Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS., 129-133.
https://hdl.handle.net/21.15107/rcub_technorep_6909

Tadić J, Svetozarević M, Dajić A, Mihajlović M, Jovanović M, Mijin D. Development of Green Chemical Process: The Reaction of Condensation in a Continuous Flow Microreactor System. in Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia. 2019;:129-133.
https://hdl.handle.net/21.15107/rcub_technorep_6909 .

Tadić, Julijana, Svetozarević, Milica, Dajić, Ana, Mihajlović, Marina, Jovanović, Mića, Mijin, Dušan, "Development of Green Chemical Process: The Reaction of Condensation in a Continuous Flow Microreactor System" in Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia (2019):129-133,
https://hdl.handle.net/21.15107/rcub_technorep_6909 .

TY  - CONF
AU  - Dajić, Ana
AU  - Mihajlović, Marina
AU  - Svetozarević, Milica
AU  - Tadić, Julijana
AU  - Jovanović, Mića
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6654
AB  - In the industry, wastewater is important environmental problem. Due to the growing
environmental concern this problem became one of key issues. Large amounts of highly
contaminated wastewater, as consequence of industrial use, are important environmental
polluters. Before discharging, wastewater has to be treated to achieve quality prescribed
by law. One of solutions could be decomposition of pollutants. The decomposition of
pollutants from industrial wastewaters is of critical importance in order to maintain a
clean environment. Many process commonly used in polluter degradation processes
commonly use different harmful chemicals or leads to formation of potentially harmful
byproducts. Treatment of wastewater from industry in microreactor system is new
ecological solution. Over the last few decades microreactors have been increasingly
recognized as being an alternative to conventional batch reactors in chemical industry.
Application of these systems have aim to transform conventional into more productive
and environmental friendlier process. They are characterized by micrometer dimensions
and continuous mode, resulting in significant intensification of the mass and heat
transfer. Microreactor systems are already find application in chemical industry,
biotechnology, pharmaceutical industry and medicine. Decomposition of pollutants in
wastewater is complex, but microreactors allow purification with low quantities of
chemical reagents. This paper represents review of possible fields of wastewater
purification – waste material decomposition in microreactor systems.
PB  - Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS
C3  - Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia
T1  - Are the Tube Microreactors Future of Wastewater Treatment?
EP  - 112
SP  - 107
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6654
ER  - 

@conference{
author = "Dajić, Ana and Mihajlović, Marina and Svetozarević, Milica and Tadić, Julijana and Jovanović, Mića",
year = "2019",
abstract = "In the industry, wastewater is important environmental problem. Due to the growing
environmental concern this problem became one of key issues. Large amounts of highly
contaminated wastewater, as consequence of industrial use, are important environmental
polluters. Before discharging, wastewater has to be treated to achieve quality prescribed
by law. One of solutions could be decomposition of pollutants. The decomposition of
pollutants from industrial wastewaters is of critical importance in order to maintain a
clean environment. Many process commonly used in polluter degradation processes
commonly use different harmful chemicals or leads to formation of potentially harmful
byproducts. Treatment of wastewater from industry in microreactor system is new
ecological solution. Over the last few decades microreactors have been increasingly
recognized as being an alternative to conventional batch reactors in chemical industry.
Application of these systems have aim to transform conventional into more productive
and environmental friendlier process. They are characterized by micrometer dimensions
and continuous mode, resulting in significant intensification of the mass and heat
transfer. Microreactor systems are already find application in chemical industry,
biotechnology, pharmaceutical industry and medicine. Decomposition of pollutants in
wastewater is complex, but microreactors allow purification with low quantities of
chemical reagents. This paper represents review of possible fields of wastewater
purification – waste material decomposition in microreactor systems.",
publisher = "Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS",
journal = "Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia",
title = "Are the Tube Microreactors Future of Wastewater Treatment?",
pages = "112-107",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6654"
}

Dajić, A., Mihajlović, M., Svetozarević, M., Tadić, J.,& Jovanović, M.. (2019). Are the Tube Microreactors Future of Wastewater Treatment?. in Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia
Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS., 107-112.
https://hdl.handle.net/21.15107/rcub_technorep_6654

Dajić A, Mihajlović M, Svetozarević M, Tadić J, Jovanović M. Are the Tube Microreactors Future of Wastewater Treatment?. in Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia. 2019;:107-112.
https://hdl.handle.net/21.15107/rcub_technorep_6654 .

Dajić, Ana, Mihajlović, Marina, Svetozarević, Milica, Tadić, Julijana, Jovanović, Mića, "Are the Tube Microreactors Future of Wastewater Treatment?" in Conference proceedings / International Scientific Conference Environmental Impact of Illegal Construction, Poor Planning and Design IMPEDE 2019, 10-11 October 2019, Belgrade, Serbia (2019):107-112,
https://hdl.handle.net/21.15107/rcub_technorep_6654 .

TY  - JOUR
AU  - Lapčević, Zoran
AU  - Mandić-Rajčević, Stefan
AU  - Lepić, Milan
AU  - Jovanović, Mića
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5889
AB  - Various organizations have endeavored to develop assessment methods for the identification and management of weaknesses in hospital disaster preparedness. Although the largest number of patients receive their regular care at the primary level, there is no internationally validated tool for the rapid safety assessment of primary health care centers (PHC). Flooding accounts for almost 50% of all disasters related to weather, and climate models consider these events as highly probable in the future. In May 2014, heavy rain caused floods affecting around 1.6 million people in Serbia, leaving the municipality of Obrenovac most severely impacted. This paper aims at assessing the safety of PHC Obrenovac using the Hospital Safety Index (HSI), evaluating the usefulness of HSI for safety assessment of PHCs, and drawing lessons from the 2014 floods. PHC Obrenovac had an overall safety index of 0.82, with structural, nonstructural safety, and disaster management indices of 0.95, 0.74, and 0.75, respectively, implying it is likely to function in disasters. A detailed analysis of individual HSI items underlined the necessary improvements in the field of emergency power and water supply, telecommunication, and emergency medical supplies, which rendered the PHC non-functional during the 2014 floods. Most items were considered of same relevance for primary healthcare centers as for hospitals, excluding some items in the medical equipment, patient care, and support services. Fine-tuning the HSI to primary healthcare settings, officially translating it into different languages, facilitating scoring and analysis could result in a valid safety evaluation tool of primary healthcare facilities.
PB  - Elsevier Ltd
T2  - International Journal of Disaster Risk Reduction
T1  - Evaluating a primary healthcare centre's preparedness for disasters using the hospital safety index: Lessons learned from the 2014 floods in Obrenovac, Serbia
EP  - 442
SP  - 436
VL  - 34
DO  - 10.1016/j.ijdrr.2018.12.014
ER  - 

@article{
author = "Lapčević, Zoran and Mandić-Rajčević, Stefan and Lepić, Milan and Jovanović, Mića",
year = "2019",
abstract = "Various organizations have endeavored to develop assessment methods for the identification and management of weaknesses in hospital disaster preparedness. Although the largest number of patients receive their regular care at the primary level, there is no internationally validated tool for the rapid safety assessment of primary health care centers (PHC). Flooding accounts for almost 50% of all disasters related to weather, and climate models consider these events as highly probable in the future. In May 2014, heavy rain caused floods affecting around 1.6 million people in Serbia, leaving the municipality of Obrenovac most severely impacted. This paper aims at assessing the safety of PHC Obrenovac using the Hospital Safety Index (HSI), evaluating the usefulness of HSI for safety assessment of PHCs, and drawing lessons from the 2014 floods. PHC Obrenovac had an overall safety index of 0.82, with structural, nonstructural safety, and disaster management indices of 0.95, 0.74, and 0.75, respectively, implying it is likely to function in disasters. A detailed analysis of individual HSI items underlined the necessary improvements in the field of emergency power and water supply, telecommunication, and emergency medical supplies, which rendered the PHC non-functional during the 2014 floods. Most items were considered of same relevance for primary healthcare centers as for hospitals, excluding some items in the medical equipment, patient care, and support services. Fine-tuning the HSI to primary healthcare settings, officially translating it into different languages, facilitating scoring and analysis could result in a valid safety evaluation tool of primary healthcare facilities.",
publisher = "Elsevier Ltd",
journal = "International Journal of Disaster Risk Reduction",
title = "Evaluating a primary healthcare centre's preparedness for disasters using the hospital safety index: Lessons learned from the 2014 floods in Obrenovac, Serbia",
pages = "442-436",
volume = "34",
doi = "10.1016/j.ijdrr.2018.12.014"
}

Lapčević, Z., Mandić-Rajčević, S., Lepić, M.,& Jovanović, M.. (2019). Evaluating a primary healthcare centre's preparedness for disasters using the hospital safety index: Lessons learned from the 2014 floods in Obrenovac, Serbia. in International Journal of Disaster Risk Reduction
Elsevier Ltd., 34, 436-442.
https://doi.org/10.1016/j.ijdrr.2018.12.014

Lapčević Z, Mandić-Rajčević S, Lepić M, Jovanović M. Evaluating a primary healthcare centre's preparedness for disasters using the hospital safety index: Lessons learned from the 2014 floods in Obrenovac, Serbia. in International Journal of Disaster Risk Reduction. 2019;34:436-442.
doi:10.1016/j.ijdrr.2018.12.014 .

Lapčević, Zoran, Mandić-Rajčević, Stefan, Lepić, Milan, Jovanović, Mića, "Evaluating a primary healthcare centre's preparedness for disasters using the hospital safety index: Lessons learned from the 2014 floods in Obrenovac, Serbia" in International Journal of Disaster Risk Reduction, 34 (2019):436-442,
https://doi.org/10.1016/j.ijdrr.2018.12.014 . .

TY  - JOUR
AU  - Mandić-Rajčević, Stefan
AU  - Bulat, Zorica
AU  - Matović, Vesna
AU  - Popević, Martin
AU  - Lepić, Milan
AU  - Mandić, Bojana
AU  - Jovanović, Mića
AU  - Haufroid, Vincent
AU  - Žarković, Miloš
AU  - Bulat, Petar
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5873
AB  - Blood lead levels (BLLs) have been falling steadily worldwide due to restricted use of lead (Pb) and its compounds. although they remain above preindustrial Pb levels. Elevated BLL can still be found in children living near secondary Pb smelters that represent around 50% of Pb production. There have been no studies on Pb exposure in children living in Serbia ever since the 1980s. The aim of this study was to evaluate the BLLs in children living in two villages in Serbia (Zajača, the location of a secondary lead smelter, and Paskovac, 5 km away), identify the primary determinants of children's BLLs, and investigate the impact of BLLs on children's health symptoms and school achievement. The study was conducted in 2011 on 127 children, aged 1–18 years, whose BLLs were measured using inductively coupled argon plasma mass spectrometry (ICP-MS). The median BLL in children was 12 μg/dl, with a significantly higher value of 17.5 μg/dl in Zajača, compared to 7.6 μg/dl in Paskovac. Only 1 out of 75 and 12 out of 52 children from Zajača and Paskovac, respectively, had BLLs below the CDC recommended 5 μg/dl level. Living near the smelter resulted in 19 times, and having a father who works in the plant 4 times higher odds of elevated BLLs. No significant effects of elevated BLLs health symptoms were seen in this study. BLLs of children living near a battery recycling plant in Serbia, an upper-middle income European country, were in the range and even higher than those of children living in developing countries. For the first time, the contribution of environmental and take-home lead exposure was quantified using mixed-effect modeling, and our results indicate a contribution of 25–40% of the take-home lead exposure to the BLLs of children living in the vicinity of a secondary lead smelter.
PB  - Academic Press Inc.
T2  - Environmental Research
T1  - Environmental and take-home lead exposure in children living in the vicinity of a lead battery smelter in Serbia
EP  - 734
SP  - 725
VL  - 167
DO  - 10.1016/j.envres.2018.08.031
ER  - 

@article{
author = "Mandić-Rajčević, Stefan and Bulat, Zorica and Matović, Vesna and Popević, Martin and Lepić, Milan and Mandić, Bojana and Jovanović, Mića and Haufroid, Vincent and Žarković, Miloš and Bulat, Petar",
year = "2018",
abstract = "Blood lead levels (BLLs) have been falling steadily worldwide due to restricted use of lead (Pb) and its compounds. although they remain above preindustrial Pb levels. Elevated BLL can still be found in children living near secondary Pb smelters that represent around 50% of Pb production. There have been no studies on Pb exposure in children living in Serbia ever since the 1980s. The aim of this study was to evaluate the BLLs in children living in two villages in Serbia (Zajača, the location of a secondary lead smelter, and Paskovac, 5 km away), identify the primary determinants of children's BLLs, and investigate the impact of BLLs on children's health symptoms and school achievement. The study was conducted in 2011 on 127 children, aged 1–18 years, whose BLLs were measured using inductively coupled argon plasma mass spectrometry (ICP-MS). The median BLL in children was 12 μg/dl, with a significantly higher value of 17.5 μg/dl in Zajača, compared to 7.6 μg/dl in Paskovac. Only 1 out of 75 and 12 out of 52 children from Zajača and Paskovac, respectively, had BLLs below the CDC recommended 5 μg/dl level. Living near the smelter resulted in 19 times, and having a father who works in the plant 4 times higher odds of elevated BLLs. No significant effects of elevated BLLs health symptoms were seen in this study. BLLs of children living near a battery recycling plant in Serbia, an upper-middle income European country, were in the range and even higher than those of children living in developing countries. For the first time, the contribution of environmental and take-home lead exposure was quantified using mixed-effect modeling, and our results indicate a contribution of 25–40% of the take-home lead exposure to the BLLs of children living in the vicinity of a secondary lead smelter.",
publisher = "Academic Press Inc.",
journal = "Environmental Research",
title = "Environmental and take-home lead exposure in children living in the vicinity of a lead battery smelter in Serbia",
pages = "734-725",
volume = "167",
doi = "10.1016/j.envres.2018.08.031"
}

Mandić-Rajčević, S., Bulat, Z., Matović, V., Popević, M., Lepić, M., Mandić, B., Jovanović, M., Haufroid, V., Žarković, M.,& Bulat, P.. (2018). Environmental and take-home lead exposure in children living in the vicinity of a lead battery smelter in Serbia. in Environmental Research
Academic Press Inc.., 167, 725-734.
https://doi.org/10.1016/j.envres.2018.08.031

Mandić-Rajčević S, Bulat Z, Matović V, Popević M, Lepić M, Mandić B, Jovanović M, Haufroid V, Žarković M, Bulat P. Environmental and take-home lead exposure in children living in the vicinity of a lead battery smelter in Serbia. in Environmental Research. 2018;167:725-734.
doi:10.1016/j.envres.2018.08.031 .

Mandić-Rajčević, Stefan, Bulat, Zorica, Matović, Vesna, Popević, Martin, Lepić, Milan, Mandić, Bojana, Jovanović, Mića, Haufroid, Vincent, Žarković, Miloš, Bulat, Petar, "Environmental and take-home lead exposure in children living in the vicinity of a lead battery smelter in Serbia" in Environmental Research, 167 (2018):725-734,
https://doi.org/10.1016/j.envres.2018.08.031 . .

TY  - JOUR
AU  - Stevanović, Dimitrije
AU  - Jovanović, Mića B.
AU  - Mihajlović, Marina
AU  - Jovanović, Jovan M.
AU  - Grbavčić, Željko
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2640
AB  - Software for chemical processes modeling and simulation, in the past few decades, plays an important role in the development of chemical-process industry with its growing capabilities and wide range of application. Usage of process simulators in Serbia for the process design is very limited. This paper gives a brief overview of the numerous process simulators that are used in the chemical-process industry today. The conceptual design is responsible for most of the investment costs in chemical process industry. Importance of precise design on preliminary level is obvious. Wrong decisions made at the conceptual level could be carried out throughout the chain in process design to the detailed design procedures and procurement of equipment. Although preliminary design phase comprises only about 2% of the total cost of the project, it contributes significantly to the reduction of cost of the project by more than 30%. Therefore process simulators play important role in elimination of unnecessary errors in basic process design. Here is also shown a case study of parallel process simulated in different process simulators which tests the results, the reliability and usefulness of these programs in solving specific engineering tasks. Comparison of given simulation results confirm that the modern process simulators are at high level of confidence, no matter they are based on different models, equations, methods, operations, interfaces or data bases. Usage of software speeds up the arrival of optimized solution during the design and the operational procedures. Therefore software has significant impact on reducing time of pre-project phase such as research, conceptual design, and proving project abilities. Its development leads to the faster commercialization of industrial ideas.
AB  - Softveri za modelovanje i simulaciju tehnoloških procesa u poslednjih nekoliko decenija imaju značajnu ulogu u razvoju procesne industrije. Korišćenje procesnih simulatora,u našoj zemlji, za potrebe projektovanja tehnoloških procesa nije široko rasprostranjeno, a literatura je nedovoljna. U ovom radu je dat pregled savremenih procesnih simulatora i prikazane su njihove mogućnosti za projektovanja procesa u zavisnosti od grane hemijske industrije. Prikazna je studija slučaja tehnološkog procesa u više procesnih simulatora koja ispituje rezultate, pouzdanost i upotrebljivost ovih programa prilikom rešavanja konkretnih projektantskih zadatka na primeru postrojenja za separaciju prirodnog gasa. Date su uporedne karakteristike rezulata simuliranja separacije prirodnog gasa za potrebe projektovanja procesa, na osnovu simulacija u softverima različitih složenosti i kvaliteta. Procesni simulatori su pokazali svoju upotrebnu vrednost kao značajan oslonac projektantima, iako rezultati koje su pokazali međusobno imaju značajna odstupanja.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Application of process simulators in chemical engineering process design: Natural gas separation plant case study
T1  - Analiza simulatora tehnoloških procesa u funkciji projektovanja - studija slučaja separacije prirodnog gasa
EP  - 558
IS  - 5
SP  - 547
VL  - 68
DO  - 10.2298/HEMIND130424002S
ER  - 

@article{
author = "Stevanović, Dimitrije and Jovanović, Mića B. and Mihajlović, Marina and Jovanović, Jovan M. and Grbavčić, Željko",
year = "2014",
abstract = "Software for chemical processes modeling and simulation, in the past few decades, plays an important role in the development of chemical-process industry with its growing capabilities and wide range of application. Usage of process simulators in Serbia for the process design is very limited. This paper gives a brief overview of the numerous process simulators that are used in the chemical-process industry today. The conceptual design is responsible for most of the investment costs in chemical process industry. Importance of precise design on preliminary level is obvious. Wrong decisions made at the conceptual level could be carried out throughout the chain in process design to the detailed design procedures and procurement of equipment. Although preliminary design phase comprises only about 2% of the total cost of the project, it contributes significantly to the reduction of cost of the project by more than 30%. Therefore process simulators play important role in elimination of unnecessary errors in basic process design. Here is also shown a case study of parallel process simulated in different process simulators which tests the results, the reliability and usefulness of these programs in solving specific engineering tasks. Comparison of given simulation results confirm that the modern process simulators are at high level of confidence, no matter they are based on different models, equations, methods, operations, interfaces or data bases. Usage of software speeds up the arrival of optimized solution during the design and the operational procedures. Therefore software has significant impact on reducing time of pre-project phase such as research, conceptual design, and proving project abilities. Its development leads to the faster commercialization of industrial ideas., Softveri za modelovanje i simulaciju tehnoloških procesa u poslednjih nekoliko decenija imaju značajnu ulogu u razvoju procesne industrije. Korišćenje procesnih simulatora,u našoj zemlji, za potrebe projektovanja tehnoloških procesa nije široko rasprostranjeno, a literatura je nedovoljna. U ovom radu je dat pregled savremenih procesnih simulatora i prikazane su njihove mogućnosti za projektovanja procesa u zavisnosti od grane hemijske industrije. Prikazna je studija slučaja tehnološkog procesa u više procesnih simulatora koja ispituje rezultate, pouzdanost i upotrebljivost ovih programa prilikom rešavanja konkretnih projektantskih zadatka na primeru postrojenja za separaciju prirodnog gasa. Date su uporedne karakteristike rezulata simuliranja separacije prirodnog gasa za potrebe projektovanja procesa, na osnovu simulacija u softverima različitih složenosti i kvaliteta. Procesni simulatori su pokazali svoju upotrebnu vrednost kao značajan oslonac projektantima, iako rezultati koje su pokazali međusobno imaju značajna odstupanja.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Application of process simulators in chemical engineering process design: Natural gas separation plant case study, Analiza simulatora tehnoloških procesa u funkciji projektovanja - studija slučaja separacije prirodnog gasa",
pages = "558-547",
number = "5",
volume = "68",
doi = "10.2298/HEMIND130424002S"
}

Stevanović, D., Jovanović, M. B., Mihajlović, M., Jovanović, J. M.,& Grbavčić, Ž.. (2014). Application of process simulators in chemical engineering process design: Natural gas separation plant case study. in Hemijska industrija
Association of Chemical Engineers of Serbia., 68(5), 547-558.
https://doi.org/10.2298/HEMIND130424002S

Stevanović D, Jovanović MB, Mihajlović M, Jovanović JM, Grbavčić Ž. Application of process simulators in chemical engineering process design: Natural gas separation plant case study. in Hemijska industrija. 2014;68(5):547-558.
doi:10.2298/HEMIND130424002S .

Stevanović, Dimitrije, Jovanović, Mića B., Mihajlović, Marina, Jovanović, Jovan M., Grbavčić, Željko, "Application of process simulators in chemical engineering process design: Natural gas separation plant case study" in Hemijska industrija, 68, no. 5 (2014):547-558,
https://doi.org/10.2298/HEMIND130424002S . .

TY  - JOUR
AU  - Mihajlović, Marina
AU  - Stevanović, Dimitrije
AU  - Jovanović, Jovan M.
AU  - Jovanović, Mića B.
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2343
AB  - As a consequence of environmental legislation improvement in Serbia for industrial producers, especially future holders of Integrated Pollution Prevention Control (IPPC) license, it is necessary to report annually on emissions of pollutants emitted into the environment and pay certain environmental fees. Wastewater treatment plants can be significant sources of volatile organic compounds (VOCs) diffuse emissions, which are difficult to measure directly. Reporting obligations may also expand to benzene and other VOCs in the near future. This paper deals with gaseous emissions calculations from an API separator, based on emission factors and adequate software applications. The analyses results show that the estimated emission values are significantly different, depending on the applied method. VOC emissions have been estimated using US EPA and CONCAWE emissions factors. Calculated emissions range from 40 to 4500 tons/year for oil refinery WWTP of 2,000,000 m3/year. The calculations of benzene and toluene emissions have been performed using three methods: U.S. EPA emission factors, and WATER9 and Toxchem+ software. The calculated benzene and toluene emissions range from 5.5-60 and 0.7-20 tons/year, respectively. U.S. EPA emission factors give the highest values and Toxchem+ the lowest estimation values. Sensitivity analysis of obtained results included the following parameters: flow, temperature, oil content and the concentration of benzene and toluene in the effluent. The wide range of results indicates the need for their official interpretation for the conditions that are typical for Serbia if, in the future, the "polluter pays" principle should be applied to VOC and benzene emissions. The proposal is that adequate national emission factors should be established.
AB  - Stupanjem na snagu novih zakonskih akata, industrijski zagađivači u Srbiji - budući nosioci integrisane dozvole, dužni su da na godišnjem nivou izveštavaju o emisijama štetnih gasova koji se ispuštaju u životnu sredinu i da u skladu sa time plaćaju određene ekološke naknade. Obaveza izveštavanja u skorijoj budućnosti može se proširiti na benzen i druge lako isparljive ugljovodonike. Predmet analize ovog rada su primena emisionih faktora i softverske simulacije za proračun gasovitih emisija iz postrojenja za tretman otpadnih voda. Rezultati pokazuju da se izračunate vrednosti emisija značajno razlikuju od metode do metode, a u diskusiji se posebna pažnja obraća na procenu pouzdanosti svake od njih.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - VOC emission from oil refinery and petrochemical wastewater treatment plant estimation
T1  - Procena emisija lakoisparljivih organskih jedinjenja iz postrojenja za primarni tretman otpadnih voda rafinerijskih i petrohemijskih postrojenja
EP  - 373
IS  - 2
SP  - 365
VL  - 67
DO  - 10.2298/HEMIND120427077S
ER  - 

@article{
author = "Mihajlović, Marina and Stevanović, Dimitrije and Jovanović, Jovan M. and Jovanović, Mića B.",
year = "2013",
abstract = "As a consequence of environmental legislation improvement in Serbia for industrial producers, especially future holders of Integrated Pollution Prevention Control (IPPC) license, it is necessary to report annually on emissions of pollutants emitted into the environment and pay certain environmental fees. Wastewater treatment plants can be significant sources of volatile organic compounds (VOCs) diffuse emissions, which are difficult to measure directly. Reporting obligations may also expand to benzene and other VOCs in the near future. This paper deals with gaseous emissions calculations from an API separator, based on emission factors and adequate software applications. The analyses results show that the estimated emission values are significantly different, depending on the applied method. VOC emissions have been estimated using US EPA and CONCAWE emissions factors. Calculated emissions range from 40 to 4500 tons/year for oil refinery WWTP of 2,000,000 m3/year. The calculations of benzene and toluene emissions have been performed using three methods: U.S. EPA emission factors, and WATER9 and Toxchem+ software. The calculated benzene and toluene emissions range from 5.5-60 and 0.7-20 tons/year, respectively. U.S. EPA emission factors give the highest values and Toxchem+ the lowest estimation values. Sensitivity analysis of obtained results included the following parameters: flow, temperature, oil content and the concentration of benzene and toluene in the effluent. The wide range of results indicates the need for their official interpretation for the conditions that are typical for Serbia if, in the future, the "polluter pays" principle should be applied to VOC and benzene emissions. The proposal is that adequate national emission factors should be established., Stupanjem na snagu novih zakonskih akata, industrijski zagađivači u Srbiji - budući nosioci integrisane dozvole, dužni su da na godišnjem nivou izveštavaju o emisijama štetnih gasova koji se ispuštaju u životnu sredinu i da u skladu sa time plaćaju određene ekološke naknade. Obaveza izveštavanja u skorijoj budućnosti može se proširiti na benzen i druge lako isparljive ugljovodonike. Predmet analize ovog rada su primena emisionih faktora i softverske simulacije za proračun gasovitih emisija iz postrojenja za tretman otpadnih voda. Rezultati pokazuju da se izračunate vrednosti emisija značajno razlikuju od metode do metode, a u diskusiji se posebna pažnja obraća na procenu pouzdanosti svake od njih.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "VOC emission from oil refinery and petrochemical wastewater treatment plant estimation, Procena emisija lakoisparljivih organskih jedinjenja iz postrojenja za primarni tretman otpadnih voda rafinerijskih i petrohemijskih postrojenja",
pages = "373-365",
number = "2",
volume = "67",
doi = "10.2298/HEMIND120427077S"
}

Mihajlović, M., Stevanović, D., Jovanović, J. M.,& Jovanović, M. B.. (2013). VOC emission from oil refinery and petrochemical wastewater treatment plant estimation. in Hemijska industrija
Association of Chemical Engineers of Serbia., 67(2), 365-373.
https://doi.org/10.2298/HEMIND120427077S

Mihajlović M, Stevanović D, Jovanović JM, Jovanović MB. VOC emission from oil refinery and petrochemical wastewater treatment plant estimation. in Hemijska industrija. 2013;67(2):365-373.
doi:10.2298/HEMIND120427077S .

Mihajlović, Marina, Stevanović, Dimitrije, Jovanović, Jovan M., Jovanović, Mića B., "VOC emission from oil refinery and petrochemical wastewater treatment plant estimation" in Hemijska industrija, 67, no. 2 (2013):365-373,
https://doi.org/10.2298/HEMIND120427077S . .

TY  - JOUR
AU  - Mihajlović, Marina
AU  - Veljašević, Ana S.
AU  - Jovanović, Jovan M.
AU  - Jovanović, Mića B.
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2374
AB  - Storage of crude oil and petroleum products inevitably leads to evaporative losses. Those losses are important for the industrial plants mass balances, as well as for the environmental protection. In this paper, estimation of evaporative losses was performed using software program TANKS 409d which was developed by the Agency for Environmental Protection of the United States US EPA. Emissions were estimated for the following types of storage tanks: fixed conical roof tank, fixed dome roof tank, external floating roof tank, internal floating roof tank and domed external floating roof tank. Obtained results show quantities of evaporated losses per tone of stored liquid. Crude oil fixed roof storage tank losses are cca. 0.5 kg per tone of crude oil. For floating roof, crude oil losses are 0.001 kg/t. Fuel oil (diesel fuel and heating oil) have the smallest evaporation losses, which are in order of magnitude 10-3 kg/tone. Liquids with higher Reid Vapor Pressure have very high evaporative losses for tanks with fixed roof, up to 2.07 kg/tone. In case of external floating roof tank, losses are 0.32 kg/tone. The smallest losses are for internal floating roof tank and domed external floating roof tank: 0.072 and 0.044, respectively. Finally, it can be concluded that the liquid with low volatility of low BTEX amount can be stored in tanks with fixed roof. In this case, the prevailing economic aspect, because the total amount of evaporative loss does not significantly affect the environment. On the other hand, storage of volatile derivatives with high levels of BTEX is not justified from the economic point of view or from the standpoint of the environment protection.
AB  - Skladištenje nafte i naftnih derivata neizbežno dovodi do pojave evaporativnih gubitaka, koji su važni sa stanovišta odgovarajućeg bilansa i sa stanovišta zaštite životne sredine. U radu je izvršena kvantifikacija evaporativnih gubitaka za različite tipove komercijalnih rezervoara sa fiksnim i plivajućim krovovima korišćenjem softverskog programa TANKS 409d. Na osnovu rezultata procenjene su mase evaporativnih gubitaka po toni uskladištene tečnosti. Gubici sirove nafte za rezervaore sa fiksnim krovom iznose oko 0,5 kg/t sirove nafte, a za rezervoare sa plutajućim krovom oko 0,001 kg/t. Gubici dizela i mazuta su zanemarljivo mali, iznose do 10-3 kg/t. Najznačajniji gubici isparljivih tečnosti su u rezervoarima sa fiksnim krovom (do 2,07 kg/t), a najmanji gubici su kod rezervoara sa kupolastim krovom (oko 0,004 kg/t). Predmetni rezultati predstavljaju osnovu za analizu problema sa tehnoekonomskog stanovišta i sa stanovišta zaštite životne sredine, u funkciji projektovanja.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Estimation of evaporative losses during storage of crude oil and petroleum products
T1  - Kvantifikacija evaporativnih gubitaka nafte i naftnih derivata tokom skladištenja
EP  - 174
IS  - 1
SP  - 165
VL  - 67
DO  - 10.2298/HEMIND120301050S
ER  - 

@article{
author = "Mihajlović, Marina and Veljašević, Ana S. and Jovanović, Jovan M. and Jovanović, Mića B.",
year = "2013",
abstract = "Storage of crude oil and petroleum products inevitably leads to evaporative losses. Those losses are important for the industrial plants mass balances, as well as for the environmental protection. In this paper, estimation of evaporative losses was performed using software program TANKS 409d which was developed by the Agency for Environmental Protection of the United States US EPA. Emissions were estimated for the following types of storage tanks: fixed conical roof tank, fixed dome roof tank, external floating roof tank, internal floating roof tank and domed external floating roof tank. Obtained results show quantities of evaporated losses per tone of stored liquid. Crude oil fixed roof storage tank losses are cca. 0.5 kg per tone of crude oil. For floating roof, crude oil losses are 0.001 kg/t. Fuel oil (diesel fuel and heating oil) have the smallest evaporation losses, which are in order of magnitude 10-3 kg/tone. Liquids with higher Reid Vapor Pressure have very high evaporative losses for tanks with fixed roof, up to 2.07 kg/tone. In case of external floating roof tank, losses are 0.32 kg/tone. The smallest losses are for internal floating roof tank and domed external floating roof tank: 0.072 and 0.044, respectively. Finally, it can be concluded that the liquid with low volatility of low BTEX amount can be stored in tanks with fixed roof. In this case, the prevailing economic aspect, because the total amount of evaporative loss does not significantly affect the environment. On the other hand, storage of volatile derivatives with high levels of BTEX is not justified from the economic point of view or from the standpoint of the environment protection., Skladištenje nafte i naftnih derivata neizbežno dovodi do pojave evaporativnih gubitaka, koji su važni sa stanovišta odgovarajućeg bilansa i sa stanovišta zaštite životne sredine. U radu je izvršena kvantifikacija evaporativnih gubitaka za različite tipove komercijalnih rezervoara sa fiksnim i plivajućim krovovima korišćenjem softverskog programa TANKS 409d. Na osnovu rezultata procenjene su mase evaporativnih gubitaka po toni uskladištene tečnosti. Gubici sirove nafte za rezervaore sa fiksnim krovom iznose oko 0,5 kg/t sirove nafte, a za rezervoare sa plutajućim krovom oko 0,001 kg/t. Gubici dizela i mazuta su zanemarljivo mali, iznose do 10-3 kg/t. Najznačajniji gubici isparljivih tečnosti su u rezervoarima sa fiksnim krovom (do 2,07 kg/t), a najmanji gubici su kod rezervoara sa kupolastim krovom (oko 0,004 kg/t). Predmetni rezultati predstavljaju osnovu za analizu problema sa tehnoekonomskog stanovišta i sa stanovišta zaštite životne sredine, u funkciji projektovanja.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Estimation of evaporative losses during storage of crude oil and petroleum products, Kvantifikacija evaporativnih gubitaka nafte i naftnih derivata tokom skladištenja",
pages = "174-165",
number = "1",
volume = "67",
doi = "10.2298/HEMIND120301050S"
}

Mihajlović, M., Veljašević, A. S., Jovanović, J. M.,& Jovanović, M. B.. (2013). Estimation of evaporative losses during storage of crude oil and petroleum products. in Hemijska industrija
Association of Chemical Engineers of Serbia., 67(1), 165-174.
https://doi.org/10.2298/HEMIND120301050S

Mihajlović M, Veljašević AS, Jovanović JM, Jovanović MB. Estimation of evaporative losses during storage of crude oil and petroleum products. in Hemijska industrija. 2013;67(1):165-174.
doi:10.2298/HEMIND120301050S .

Mihajlović, Marina, Veljašević, Ana S., Jovanović, Jovan M., Jovanović, Mića B., "Estimation of evaporative losses during storage of crude oil and petroleum products" in Hemijska industrija, 67, no. 1 (2013):165-174,
https://doi.org/10.2298/HEMIND120301050S . .

TY  - JOUR
AU  - Savić, Marina
AU  - Jovanović, Mića
AU  - Tanasijević, Jelena
AU  - Ocić, Ozren
AU  - Spasić, Aleksandar
AU  - Jovanić, Predrag
AU  - Nikolić, Ivan
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6331
AB  - Algoritam za redukciju otpada (eng. waste reduction algorithm – WAR) jeste metodologija
koja se može koristiti za procenu potencijalnog uticaja tehnoloških procesa na životnu
sredinu. Analizom pojedinačnih stupnjeva procesa proizvodnje dobijaju se podaci koji omogućavaju sagledavanje kritičnih segmenata. Cilj ovog rada je da se sagledaju kritične tačke
procesa proizvodnje bitumena sa stanovišta zaštite životne sredine. Definisanjem osnovnih
parametara algoritma WAR GUI (eng. waste reduction algorithm graphical user interface)
softverskog modela dobijene su kvantifikovane vrednosti potencijalnih uticaja na životnu
sredinu (eng. potential environmental impact – PEI) svakog pojedinačnog stupnja proizvodnog procesa, polazeći od procesa atmosferske destilacije, preko vakuum destilacije, do procesa dobijanja bitumena iz vakuum ostatka u postrojenju bitumena
PB  - Association of the Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Waste reduction algorithm used as the case study of simulated bitumen production process
EP  - 204
IS  - 2
SP  - 197
VL  - 65
DO  - 10.2298/HEMIND101108011S
ER  - 

@article{
author = "Savić, Marina and Jovanović, Mića and Tanasijević, Jelena and Ocić, Ozren and Spasić, Aleksandar and Jovanić, Predrag and Nikolić, Ivan",
year = "2011",
abstract = "Algoritam za redukciju otpada (eng. waste reduction algorithm – WAR) jeste metodologija
koja se može koristiti za procenu potencijalnog uticaja tehnoloških procesa na životnu
sredinu. Analizom pojedinačnih stupnjeva procesa proizvodnje dobijaju se podaci koji omogućavaju sagledavanje kritičnih segmenata. Cilj ovog rada je da se sagledaju kritične tačke
procesa proizvodnje bitumena sa stanovišta zaštite životne sredine. Definisanjem osnovnih
parametara algoritma WAR GUI (eng. waste reduction algorithm graphical user interface)
softverskog modela dobijene su kvantifikovane vrednosti potencijalnih uticaja na životnu
sredinu (eng. potential environmental impact – PEI) svakog pojedinačnog stupnja proizvodnog procesa, polazeći od procesa atmosferske destilacije, preko vakuum destilacije, do procesa dobijanja bitumena iz vakuum ostatka u postrojenju bitumena",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Waste reduction algorithm used as the case study of simulated bitumen production process",
pages = "204-197",
number = "2",
volume = "65",
doi = "10.2298/HEMIND101108011S"
}

Savić, M., Jovanović, M., Tanasijević, J., Ocić, O., Spasić, A., Jovanić, P.,& Nikolić, I.. (2011). Waste reduction algorithm used as the case study of simulated bitumen production process. in Hemijska industrija
Association of the Chemical Engineers of Serbia., 65(2), 197-204.
https://doi.org/10.2298/HEMIND101108011S

Savić M, Jovanović M, Tanasijević J, Ocić O, Spasić A, Jovanić P, Nikolić I. Waste reduction algorithm used as the case study of simulated bitumen production process. in Hemijska industrija. 2011;65(2):197-204.
doi:10.2298/HEMIND101108011S .

Savić, Marina, Jovanović, Mića, Tanasijević, Jelena, Ocić, Ozren, Spasić, Aleksandar, Jovanić, Predrag, Nikolić, Ivan, "Waste reduction algorithm used as the case study of simulated bitumen production process" in Hemijska industrija, 65, no. 2 (2011):197-204,
https://doi.org/10.2298/HEMIND101108011S . .

TY  - JOUR
AU  - Simonović, Branislav R.
AU  - Arandjelović, Dragana
AU  - Jovanović, Mića
AU  - Kovačević, Branimir
AU  - Pezo, Lato
AU  - Jovanović, Aca
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5546
AB  - This study investigates the use of hard coal as an adsorbent for removal of mineral oil from wastewater. In order to determine the efficiency of hard coal as an adsorbent of mineral oil, process parameters such as sorption capacity (in static and dynamic conditions), temperature, pH, contact time, flow rate, and chemical pretreatment were evaluated in a series of batch and continuous flow experiments. There were significant differences in the mineral oil removal for various pH values examined. The adsorption of mineral oil increased as pH values diverged from 7 (neutral). At lower temperatures, the adsorption was notably higher. The wastewater flow rate was adjusted to achieve optimal water purification. Equilibrium was reached after 10 h in static conditions. At that time, more than 99% of mineral oil had been removed. At the beginning of the filtering process, the adsorption rate increased rapidly, only to show a minor decrease afterwards. Equilibrium data were fitted to Freundlich models to determine the water-hard coal partitioning coefficient. Physical adsorption caused by properties of the compounds was the predominant mechanism in the removal process.
PB  - Association of Chemical Engineers of Serbia
T2  - Chemical Industry and Chemical Engineering Quarterly
T1  - Removal of mineral oil and wastewater pollutants using hard coal
EP  - 62
IS  - 2
SP  - 57
VL  - 15
DO  - 10.2298/CICEQ0902057S
ER  - 

@article{
author = "Simonović, Branislav R. and Arandjelović, Dragana and Jovanović, Mića and Kovačević, Branimir and Pezo, Lato and Jovanović, Aca",
year = "2009",
abstract = "This study investigates the use of hard coal as an adsorbent for removal of mineral oil from wastewater. In order to determine the efficiency of hard coal as an adsorbent of mineral oil, process parameters such as sorption capacity (in static and dynamic conditions), temperature, pH, contact time, flow rate, and chemical pretreatment were evaluated in a series of batch and continuous flow experiments. There were significant differences in the mineral oil removal for various pH values examined. The adsorption of mineral oil increased as pH values diverged from 7 (neutral). At lower temperatures, the adsorption was notably higher. The wastewater flow rate was adjusted to achieve optimal water purification. Equilibrium was reached after 10 h in static conditions. At that time, more than 99% of mineral oil had been removed. At the beginning of the filtering process, the adsorption rate increased rapidly, only to show a minor decrease afterwards. Equilibrium data were fitted to Freundlich models to determine the water-hard coal partitioning coefficient. Physical adsorption caused by properties of the compounds was the predominant mechanism in the removal process.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Chemical Industry and Chemical Engineering Quarterly",
title = "Removal of mineral oil and wastewater pollutants using hard coal",
pages = "62-57",
number = "2",
volume = "15",
doi = "10.2298/CICEQ0902057S"
}

Simonović, B. R., Arandjelović, D., Jovanović, M., Kovačević, B., Pezo, L.,& Jovanović, A.. (2009). Removal of mineral oil and wastewater pollutants using hard coal. in Chemical Industry and Chemical Engineering Quarterly
Association of Chemical Engineers of Serbia., 15(2), 57-62.
https://doi.org/10.2298/CICEQ0902057S

Simonović BR, Arandjelović D, Jovanović M, Kovačević B, Pezo L, Jovanović A. Removal of mineral oil and wastewater pollutants using hard coal. in Chemical Industry and Chemical Engineering Quarterly. 2009;15(2):57-62.
doi:10.2298/CICEQ0902057S .

Simonović, Branislav R., Arandjelović, Dragana, Jovanović, Mića, Kovačević, Branimir, Pezo, Lato, Jovanović, Aca, "Removal of mineral oil and wastewater pollutants using hard coal" in Chemical Industry and Chemical Engineering Quarterly, 15, no. 2 (2009):57-62,
https://doi.org/10.2298/CICEQ0902057S . .

TY  - JOUR
AU  - Tomašević, Anđelka
AU  - Avramov-Ivić, Milka
AU  - Petrović, Slobodan
AU  - Jovanović, Mića B.
AU  - Mijin, Dušan
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1384
AB  - A gold electrode was used for the qualitative and quantitative electrochemical determination of analytical methomyl in a neutral electrolyte (0.050 M NaHCO3) using cyclic linear sweep voltammetry. In the potential range from -800 mV vs. SCE to 1000 mV vs. SCE the analytical methomyl was quantitatively determined in the concentration range 4.0-16 mg L-1. In the potential range from -1300 mV vs. SCE to 1300 mV vs. SCE, methomyl was qualitatively determined by two anodic and four cathodic reactions. Cycling the potential in this range for 150 min caused the degradation of the molecule, which was confirmed by HPLC analysis. On the other hand, technical methomyl exhibited an inhibition of the gold electrode surface due to the impurities.
AB  - U radu su dati rezultati ispitivanja elektrohemijskog ponašanja aktivnosti metomila (analitičkog i tehničkog proizvoda) na elektrodi od zlata u neutralnom elektrolitu (0,050 M NaHCO3). HPLC je korišćena za analizu elektrolita u toku elektrohemijske reakcije. Maksimalna vrednost visine strujnog vrha oksidacije čistog metomila na 600 mV prema ZKE u 0,050 M NaHCO3 na 50 mV s-1 je linearna funkcija njegove koncentracije u opsegu 4-16 mg L-1 što je omogućilo razvijanje metode za njegovo kvantitativno određiva- nje. Analitički metomil je kvalitativno određen detekcijom reproduktivne četiri anodne i jedne katodne reakcije u opsegu potencijala od -1300 do 1300 mV prema ZKE. Potencijal je cikliziran 150 min u navedenom opsegu i analiza anodnih i katodnih reakcija na početku, u toku i na kraju cikliziranja potencijala je ukazala na degradaciju molekula metomila. Tokom cikliziranja potencijala, HPLC analiza elektrolita je pokazala smanjenje koncentracija metomila kao posledicu njegove degradacije. Tehnički metomil nije pogodan za ispitivanje pod navedenim uslovima jer prisutne nečistoće inhibiraju površinu elektrode.
PB  - Serbian Chemical Society, Belgrade
T2  - Journal of the Serbian Chemical Society
T1  - A study of the electrochemical behavior of methomyl on a gold electrode in a neutral electrolyte
T1  - Proučavanje elektrohemijskog ponašanja metomila na elektrodi od zlata u neutralnom elektrolitu
EP  - 579
IS  - 5
SP  - 573
VL  - 74
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1384
ER  - 

@article{
author = "Tomašević, Anđelka and Avramov-Ivić, Milka and Petrović, Slobodan and Jovanović, Mića B. and Mijin, Dušan",
year = "2009",
abstract = "A gold electrode was used for the qualitative and quantitative electrochemical determination of analytical methomyl in a neutral electrolyte (0.050 M NaHCO3) using cyclic linear sweep voltammetry. In the potential range from -800 mV vs. SCE to 1000 mV vs. SCE the analytical methomyl was quantitatively determined in the concentration range 4.0-16 mg L-1. In the potential range from -1300 mV vs. SCE to 1300 mV vs. SCE, methomyl was qualitatively determined by two anodic and four cathodic reactions. Cycling the potential in this range for 150 min caused the degradation of the molecule, which was confirmed by HPLC analysis. On the other hand, technical methomyl exhibited an inhibition of the gold electrode surface due to the impurities., U radu su dati rezultati ispitivanja elektrohemijskog ponašanja aktivnosti metomila (analitičkog i tehničkog proizvoda) na elektrodi od zlata u neutralnom elektrolitu (0,050 M NaHCO3). HPLC je korišćena za analizu elektrolita u toku elektrohemijske reakcije. Maksimalna vrednost visine strujnog vrha oksidacije čistog metomila na 600 mV prema ZKE u 0,050 M NaHCO3 na 50 mV s-1 je linearna funkcija njegove koncentracije u opsegu 4-16 mg L-1 što je omogućilo razvijanje metode za njegovo kvantitativno određiva- nje. Analitički metomil je kvalitativno određen detekcijom reproduktivne četiri anodne i jedne katodne reakcije u opsegu potencijala od -1300 do 1300 mV prema ZKE. Potencijal je cikliziran 150 min u navedenom opsegu i analiza anodnih i katodnih reakcija na početku, u toku i na kraju cikliziranja potencijala je ukazala na degradaciju molekula metomila. Tokom cikliziranja potencijala, HPLC analiza elektrolita je pokazala smanjenje koncentracija metomila kao posledicu njegove degradacije. Tehnički metomil nije pogodan za ispitivanje pod navedenim uslovima jer prisutne nečistoće inhibiraju površinu elektrode.",
publisher = "Serbian Chemical Society, Belgrade",
journal = "Journal of the Serbian Chemical Society",
title = "A study of the electrochemical behavior of methomyl on a gold electrode in a neutral electrolyte, Proučavanje elektrohemijskog ponašanja metomila na elektrodi od zlata u neutralnom elektrolitu",
pages = "579-573",
number = "5",
volume = "74",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1384"
}

Tomašević, A., Avramov-Ivić, M., Petrović, S., Jovanović, M. B.,& Mijin, D.. (2009). A study of the electrochemical behavior of methomyl on a gold electrode in a neutral electrolyte. in Journal of the Serbian Chemical Society
Serbian Chemical Society, Belgrade., 74(5), 573-579.
https://hdl.handle.net/21.15107/rcub_technorep_1384

Tomašević A, Avramov-Ivić M, Petrović S, Jovanović MB, Mijin D. A study of the electrochemical behavior of methomyl on a gold electrode in a neutral electrolyte. in Journal of the Serbian Chemical Society. 2009;74(5):573-579.
https://hdl.handle.net/21.15107/rcub_technorep_1384 .

Tomašević, Anđelka, Avramov-Ivić, Milka, Petrović, Slobodan, Jovanović, Mića B., Mijin, Dušan, "A study of the electrochemical behavior of methomyl on a gold electrode in a neutral electrolyte" in Journal of the Serbian Chemical Society, 74, no. 5 (2009):573-579,
https://hdl.handle.net/21.15107/rcub_technorep_1384 .

TY  - JOUR
AU  - Jovanović, Mića
AU  - Jovanović, Jovan
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5433
AB  - Many CEE governments are still using various systems of laboratory authorization together with ISO/IEC 17025 laboratory accreditation. It is difficult to understand from the EU prospective, the existence of two parallel laboratory competence verification systems. The basic relations between laboratory accreditation and authorization: independence and succession have been defined. The case study of testing laboratory accreditation versus authorization in Serbia, has been presented and discussed. Relevant requests and procedures for water quality, food and air quality testing laboratory authorization were analysed in detail. Comparative analyses of accreditation and authorization have established: (i) independent relations, (ii) relevant regulation is in collision and barely legal, (iii) authorization is (technically) on the far lower level than accreditation is, and (iv) authorization requests cause high space and personnel costs. It has been concluded that it is not adequate to perform two policies at the same time: one EU oriented - laboratory accreditation, and one non-EU oriented - laboratory authorization. The policy proposal is that all CEE countries should abandon existing laboratory authorization procedures and replace them by accreditation. Proposed goal could be reached in rather a short transition process of 2-3 years.
PB  - Springer New York
T2  - Accreditation and Quality Assurance
T1  - Laboratory authorization versus accreditation in transitional economies: Case study of Serbia
EP  - 680
IS  - 12
SP  - 672
VL  - 10
DO  - 10.1007/s00769-005-0078-4
ER  - 

@article{
author = "Jovanović, Mića and Jovanović, Jovan",
year = "2006",
abstract = "Many CEE governments are still using various systems of laboratory authorization together with ISO/IEC 17025 laboratory accreditation. It is difficult to understand from the EU prospective, the existence of two parallel laboratory competence verification systems. The basic relations between laboratory accreditation and authorization: independence and succession have been defined. The case study of testing laboratory accreditation versus authorization in Serbia, has been presented and discussed. Relevant requests and procedures for water quality, food and air quality testing laboratory authorization were analysed in detail. Comparative analyses of accreditation and authorization have established: (i) independent relations, (ii) relevant regulation is in collision and barely legal, (iii) authorization is (technically) on the far lower level than accreditation is, and (iv) authorization requests cause high space and personnel costs. It has been concluded that it is not adequate to perform two policies at the same time: one EU oriented - laboratory accreditation, and one non-EU oriented - laboratory authorization. The policy proposal is that all CEE countries should abandon existing laboratory authorization procedures and replace them by accreditation. Proposed goal could be reached in rather a short transition process of 2-3 years.",
publisher = "Springer New York",
journal = "Accreditation and Quality Assurance",
title = "Laboratory authorization versus accreditation in transitional economies: Case study of Serbia",
pages = "680-672",
number = "12",
volume = "10",
doi = "10.1007/s00769-005-0078-4"
}

Jovanović, M.,& Jovanović, J.. (2006). Laboratory authorization versus accreditation in transitional economies: Case study of Serbia. in Accreditation and Quality Assurance
Springer New York., 10(12), 672-680.
https://doi.org/10.1007/s00769-005-0078-4

Jovanović M, Jovanović J. Laboratory authorization versus accreditation in transitional economies: Case study of Serbia. in Accreditation and Quality Assurance. 2006;10(12):672-680.
doi:10.1007/s00769-005-0078-4 .

Jovanović, Mića, Jovanović, Jovan, "Laboratory authorization versus accreditation in transitional economies: Case study of Serbia" in Accreditation and Quality Assurance, 10, no. 12 (2006):672-680,
https://doi.org/10.1007/s00769-005-0078-4 . .

TY  - JOUR
AU  - Jovanović, Mića
PY  - 2005
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5436
AB  - The development of an internationally recognized laboratory accreditation process, accompanied by a mutual recognition agreement (MRA), is an issue of great interest in Central and Eastern European countries. This paper presents a comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro. The basic analysis technique was preliminary laboratory accreditation assessment (PLAA). The analysis data were obtained via a questionnaire issued from January to June 2004, with the participation of accreditation bodies. Results from the study are presented in four sections: accreditation body standards, accreditation body organization, assessors and proficiency testing, and inter-laboratory comparisons. Research results for the countries were accessed using PLAA techniques and conformity/non conformity statements. The analysis verified that PLAA can provide low cost, rapid assessment of the key influencing factors in laboratory accreditation bodies.
PB  - Springer-Verlag
T2  - Accreditation and Quality Assurance
T1  - Comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro
EP  - 129
IS  - 3
SP  - 125
VL  - 10
DO  - 10.1007/s00769-004-0892-0
ER  - 

@article{
author = "Jovanović, Mića",
year = "2005",
abstract = "The development of an internationally recognized laboratory accreditation process, accompanied by a mutual recognition agreement (MRA), is an issue of great interest in Central and Eastern European countries. This paper presents a comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro. The basic analysis technique was preliminary laboratory accreditation assessment (PLAA). The analysis data were obtained via a questionnaire issued from January to June 2004, with the participation of accreditation bodies. Results from the study are presented in four sections: accreditation body standards, accreditation body organization, assessors and proficiency testing, and inter-laboratory comparisons. Research results for the countries were accessed using PLAA techniques and conformity/non conformity statements. The analysis verified that PLAA can provide low cost, rapid assessment of the key influencing factors in laboratory accreditation bodies.",
publisher = "Springer-Verlag",
journal = "Accreditation and Quality Assurance",
title = "Comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro",
pages = "129-125",
number = "3",
volume = "10",
doi = "10.1007/s00769-004-0892-0"
}

Jovanović, M.. (2005). Comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro. in Accreditation and Quality Assurance
Springer-Verlag., 10(3), 125-129.
https://doi.org/10.1007/s00769-004-0892-0

Jovanović M. Comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro. in Accreditation and Quality Assurance. 2005;10(3):125-129.
doi:10.1007/s00769-004-0892-0 .

Jovanović, Mića, "Comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro" in Accreditation and Quality Assurance, 10, no. 3 (2005):125-129,
https://doi.org/10.1007/s00769-004-0892-0 . .