TY  - CONF
AU  - Pavlović, Marko
AU  - Tanasković, Zorica
AU  - Dojčinović, Marina
AU  - Aćimović, Zagorka
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7004
AB  - The composition and production procedures of refractory coatings based on zirconium silicate for the protection of metal
structures in conditions of wear, cavitation and corrosion were investigated in the paper. The composition of the coating was defined
with a filler based on zirconium silicate, a binder based on epoxy resin, organic additives and an organic solvent. A method for quality
control of obtained coatings was investigated using the ultrasonic vibration method with a stationary sample according to the ASTM
G 32 standard.
The following methods were used to characterize the obtained filler samples: X-ray diffraction analysis (XRD) and scanning electron
microscopy (SEM). The change in the mass of the samples as a function of the cavitation time was monitored and the cavitation rate
was determined. The formation and development of damage to the coating surface was monitored using a scanning electron
microscope. The obtained test results showed a satisfactory resistance of the protective coatings to the effect of cavitation, with small
damage to the coating surface and a cavitation rate of 0.6 mg/min. Tests have shown that the application of the ultrasonic vibration
method is suitable for a quick assessment of the quality of protective coatings during synthesis and a forecast of their resistance and
stability during exploitation in the protection of equipment parts in mining and metallurgy.
PB  - Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice
C3  - Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia
T1  - QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE
EP  - 4-58
SP  - 4-55
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7004
ER  - 

@conference{
author = "Pavlović, Marko and Tanasković, Zorica and Dojčinović, Marina and Aćimović, Zagorka",
year = "2023",
abstract = "The composition and production procedures of refractory coatings based on zirconium silicate for the protection of metal
structures in conditions of wear, cavitation and corrosion were investigated in the paper. The composition of the coating was defined
with a filler based on zirconium silicate, a binder based on epoxy resin, organic additives and an organic solvent. A method for quality
control of obtained coatings was investigated using the ultrasonic vibration method with a stationary sample according to the ASTM
G 32 standard.
The following methods were used to characterize the obtained filler samples: X-ray diffraction analysis (XRD) and scanning electron
microscopy (SEM). The change in the mass of the samples as a function of the cavitation time was monitored and the cavitation rate
was determined. The formation and development of damage to the coating surface was monitored using a scanning electron
microscope. The obtained test results showed a satisfactory resistance of the protective coatings to the effect of cavitation, with small
damage to the coating surface and a cavitation rate of 0.6 mg/min. Tests have shown that the application of the ultrasonic vibration
method is suitable for a quick assessment of the quality of protective coatings during synthesis and a forecast of their resistance and
stability during exploitation in the protection of equipment parts in mining and metallurgy.",
publisher = "Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice",
journal = "Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia",
title = "QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE",
pages = "4-58-4-55",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7004"
}

Pavlović, M., Tanasković, Z., Dojčinović, M.,& Aćimović, Z.. (2023). QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE. in Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia
Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice., 4-55-4-58.
https://hdl.handle.net/21.15107/rcub_technorep_7004

Pavlović M, Tanasković Z, Dojčinović M, Aćimović Z. QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE. in Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia. 2023;:4-55-4-58.
https://hdl.handle.net/21.15107/rcub_technorep_7004 .

Pavlović, Marko, Tanasković, Zorica, Dojčinović, Marina, Aćimović, Zagorka, "QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE" in Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia (2023):4-55-4-58,
https://hdl.handle.net/21.15107/rcub_technorep_7004 .

TY  - JOUR
AU  - Andrić, Ljubiša
AU  - Aćimović-Pavlović, Zagorka
AU  - Trumić, Milan
AU  - Prstić, Aurel
AU  - Tanasković, Zorica
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5744
AB  - Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product surface. The paper presents the initial results of research on possibilities for utilisation of basalt from the locality " Vrelo" - Kopaonik Mountain (Serbia) for producing the opaque glaze.From frits with different basalt content (25%, 30%, 35%, and 60%) with addition of water and 5% of the kaolin " Zetlizer" the liquid glazes-suspensions were made (G-1/25, G-2/30, G-3/35, and G-4/60). The primary fired biscuit-shaped faience was used for applying the glazes by dipping, pouring and brushing methods. The further firing process of glazes took place in a laboratory tunnel furnace, under the following operating parameters: temperature T= 980 °C and retention time t= 3. h (hours).The initial investigation has shown that the basalt from the locality Vrelo is suitable for obtaining applicable glazes, bringing the attractive and decorative colours to the surfaces of the faience ceramics. The best results were achieved by adding the iron pigments.
PB  - Elsevier Ltd.
T2  - Materials and Design
T1  - Specific characteristics of coating glazes based on basalt
EP  - 13
SP  - 9
VL  - 39
DO  - 10.1016/j.matdes.2012.02.022
ER  - 

@article{
author = "Andrić, Ljubiša and Aćimović-Pavlović, Zagorka and Trumić, Milan and Prstić, Aurel and Tanasković, Zorica",
year = "2012",
abstract = "Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product surface. The paper presents the initial results of research on possibilities for utilisation of basalt from the locality " Vrelo" - Kopaonik Mountain (Serbia) for producing the opaque glaze.From frits with different basalt content (25%, 30%, 35%, and 60%) with addition of water and 5% of the kaolin " Zetlizer" the liquid glazes-suspensions were made (G-1/25, G-2/30, G-3/35, and G-4/60). The primary fired biscuit-shaped faience was used for applying the glazes by dipping, pouring and brushing methods. The further firing process of glazes took place in a laboratory tunnel furnace, under the following operating parameters: temperature T= 980 °C and retention time t= 3. h (hours).The initial investigation has shown that the basalt from the locality Vrelo is suitable for obtaining applicable glazes, bringing the attractive and decorative colours to the surfaces of the faience ceramics. The best results were achieved by adding the iron pigments.",
publisher = "Elsevier Ltd.",
journal = "Materials and Design",
title = "Specific characteristics of coating glazes based on basalt",
pages = "13-9",
volume = "39",
doi = "10.1016/j.matdes.2012.02.022"
}

Andrić, L., Aćimović-Pavlović, Z., Trumić, M., Prstić, A.,& Tanasković, Z.. (2012). Specific characteristics of coating glazes based on basalt. in Materials and Design
Elsevier Ltd.., 39, 9-13.
https://doi.org/10.1016/j.matdes.2012.02.022

Andrić L, Aćimović-Pavlović Z, Trumić M, Prstić A, Tanasković Z. Specific characteristics of coating glazes based on basalt. in Materials and Design. 2012;39:9-13.
doi:10.1016/j.matdes.2012.02.022 .

Andrić, Ljubiša, Aćimović-Pavlović, Zagorka, Trumić, Milan, Prstić, Aurel, Tanasković, Zorica, "Specific characteristics of coating glazes based on basalt" in Materials and Design, 39 (2012):9-13,
https://doi.org/10.1016/j.matdes.2012.02.022 . .