Presburger Ulniković, Vladanka

Link to this page

Authority KeyName Variants
orcid::0000-0001-6144-3399
  • Presburger Ulniković, Vladanka (1)
  • Presburger-Ulniković, Vladanka (1)
Projects

Author's Bibliography

Ship waste quantities prediction model for the Port of Belgrade

Presburger-Ulniković, Vladanka; Vukić, Marija; Jančić-Heinemann, Radmila; Antonović, Dušan

(Association of the Chemical Engineers of Serbia, 2011)

TY  - JOUR
AU  - Presburger-Ulniković, Vladanka
AU  - Vukić, Marija
AU  - Jančić-Heinemann, Radmila
AU  - Antonović, Dušan
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1848
AB  - This study focuses on the issues related to the waste management in river ports in general and especially in the port of Belgrade. Data on solid waste, waste oils, oily waters, gray water and black water have been collected for a period of five years. The methodology of data collection is presented. Trends of data were analyzed and the regression model was used to predict the waste quantities in the Belgrade port. This data could be utilized as a basis for the calculation of the equipment capacity for waste selective collection, treatment and storage. The results presented in this study establish the need for an organized management system for this type of waste which can be achieved either by constructing and providing new specialized terminal or by providing mobile floating facilities and other plants in the Port of Belgrade for these kinds of services. In addition to the above, the legislative and organizational strategy of waste management has been explored to complete the study because the impact of good waste management on environment and prevention of environmental accidents would be highly beneficial. This study demonstrated that addressing these issues should be considered at international as well as national level.
AB  - Ovaj rad se fokusira na sporna pitanja u vezi sa upravljanjem otpadom u rečnim lukama uopšte, a posebno u luci Beograd. Podaci o čvrstom otpadu, otpadnim uljima, zauljenim otpadnim vodama, sivoj i crnoj vodi, prikupljeni su za period od pet godina. Analizirani su trendovi i korišćen je regresioni model za predviđanje količine otpada u Luci Beograd. U radu je prikazana metodologija za prikupljanje podataka o čvrstom otpadu kao i o otpadnim vodama, otpadnim uljima i zauljenim vodama. Ovi podaci se mogu koristiti kao osnova za proračun kapaciteta opreme za selektivno sakupljanje otpada, njegov tretman i skladištenje. Rezultati prikazani u ovom radu dokazuju potrebu za organizovanim sistemom upravljanja za ovu vrstu otpada, koji se može postići ili izgradnjom i opremanjem novih specijalizovanih terminala ili obezbeđenjem mobilnih plovnih objekata i drugih postrojenja u luci Beograd, za ove vrste usluga. Da bi se upotpunila ova studija, pored istraživanja koja su gore navedena, istraživana je zakonodavna i organizaciona strategija upravljanja otpadom, pošto je uticaj dobrog upravljanja otpadom na životnu sredinu i sprečavanje akcidenata ne samo veoma pozitivan, već i neophodan. Ova studija će pokazati da pitanja kojima se bavi treba uzeti u obzir kako na nacionalnom, tako i na međunarodnom nivou.
PB  - Association of the Chemical Engineers of Serbia
T2  - Chemical Industry & Chemical Engineering Quarterly
T1  - Ship waste quantities prediction model for the Port of Belgrade
T1  - Model za predviđanje količine otpada u Luci Beograd
EP  - 248
IS  - 2
SP  - 239
VL  - 17
DO  - 10.2298/CICEQ100930009P
ER  - 
@article{
author = "Presburger-Ulniković, Vladanka and Vukić, Marija and Jančić-Heinemann, Radmila and Antonović, Dušan",
year = "2011",
abstract = "This study focuses on the issues related to the waste management in river ports in general and especially in the port of Belgrade. Data on solid waste, waste oils, oily waters, gray water and black water have been collected for a period of five years. The methodology of data collection is presented. Trends of data were analyzed and the regression model was used to predict the waste quantities in the Belgrade port. This data could be utilized as a basis for the calculation of the equipment capacity for waste selective collection, treatment and storage. The results presented in this study establish the need for an organized management system for this type of waste which can be achieved either by constructing and providing new specialized terminal or by providing mobile floating facilities and other plants in the Port of Belgrade for these kinds of services. In addition to the above, the legislative and organizational strategy of waste management has been explored to complete the study because the impact of good waste management on environment and prevention of environmental accidents would be highly beneficial. This study demonstrated that addressing these issues should be considered at international as well as national level., Ovaj rad se fokusira na sporna pitanja u vezi sa upravljanjem otpadom u rečnim lukama uopšte, a posebno u luci Beograd. Podaci o čvrstom otpadu, otpadnim uljima, zauljenim otpadnim vodama, sivoj i crnoj vodi, prikupljeni su za period od pet godina. Analizirani su trendovi i korišćen je regresioni model za predviđanje količine otpada u Luci Beograd. U radu je prikazana metodologija za prikupljanje podataka o čvrstom otpadu kao i o otpadnim vodama, otpadnim uljima i zauljenim vodama. Ovi podaci se mogu koristiti kao osnova za proračun kapaciteta opreme za selektivno sakupljanje otpada, njegov tretman i skladištenje. Rezultati prikazani u ovom radu dokazuju potrebu za organizovanim sistemom upravljanja za ovu vrstu otpada, koji se može postići ili izgradnjom i opremanjem novih specijalizovanih terminala ili obezbeđenjem mobilnih plovnih objekata i drugih postrojenja u luci Beograd, za ove vrste usluga. Da bi se upotpunila ova studija, pored istraživanja koja su gore navedena, istraživana je zakonodavna i organizaciona strategija upravljanja otpadom, pošto je uticaj dobrog upravljanja otpadom na životnu sredinu i sprečavanje akcidenata ne samo veoma pozitivan, već i neophodan. Ova studija će pokazati da pitanja kojima se bavi treba uzeti u obzir kako na nacionalnom, tako i na međunarodnom nivou.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Chemical Industry & Chemical Engineering Quarterly",
title = "Ship waste quantities prediction model for the Port of Belgrade, Model za predviđanje količine otpada u Luci Beograd",
pages = "248-239",
number = "2",
volume = "17",
doi = "10.2298/CICEQ100930009P"
}
Presburger-Ulniković, V., Vukić, M., Jančić-Heinemann, R.,& Antonović, D.. (2011). Ship waste quantities prediction model for the Port of Belgrade. in Chemical Industry & Chemical Engineering Quarterly
Association of the Chemical Engineers of Serbia., 17(2), 239-248.
https://doi.org/10.2298/CICEQ100930009P
Presburger-Ulniković V, Vukić M, Jančić-Heinemann R, Antonović D. Ship waste quantities prediction model for the Port of Belgrade. in Chemical Industry & Chemical Engineering Quarterly. 2011;17(2):239-248.
doi:10.2298/CICEQ100930009P .
Presburger-Ulniković, Vladanka, Vukić, Marija, Jančić-Heinemann, Radmila, Antonović, Dušan, "Ship waste quantities prediction model for the Port of Belgrade" in Chemical Industry & Chemical Engineering Quarterly, 17, no. 2 (2011):239-248,
https://doi.org/10.2298/CICEQ100930009P . .
8
7
9

The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites

Milutinović Nikolić, Aleksandra; Presburger Ulniković, Vladanka; Veličković, Sava; Aleksić, Radoslav

(Springer Netherlands, 2003)

TY  - JOUR
AU  - Milutinović Nikolić, Aleksandra
AU  - Presburger Ulniković, Vladanka
AU  - Veličković, Sava
AU  - Aleksić, Radoslav
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5397
AB  - The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with mechanical and dielectric properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.  The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed at temperatures less than 550 оC, while cooling rates should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.Different types of adhesion promoters based on silanes were applied on heat-treated glass fabric as finishes. The quality of the composite material made of thermally and chemically treated glass fabric and epoxy resin was controlled by measuring the tensile and dielectric strength of composite. Depending on which properties of composite are of main concern, mechanical or dielectric, finish with amino functional group and lower heat treatment temperature or epoxy modified coatings and higher heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites.
PB  - Springer Netherlands
T2  - Journal of Materials Science: Materials in Electronics
T1  - The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites
EP  - 79
IS  - 2
SP  - 75
VL  - 14
DO  - 10.1023/A:1021948502150
ER  - 
@article{
author = "Milutinović Nikolić, Aleksandra and Presburger Ulniković, Vladanka and Veličković, Sava and Aleksić, Radoslav",
year = "2003",
abstract = "The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with mechanical and dielectric properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.  The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed at temperatures less than 550 оC, while cooling rates should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.Different types of adhesion promoters based on silanes were applied on heat-treated glass fabric as finishes. The quality of the composite material made of thermally and chemically treated glass fabric and epoxy resin was controlled by measuring the tensile and dielectric strength of composite. Depending on which properties of composite are of main concern, mechanical or dielectric, finish with amino functional group and lower heat treatment temperature or epoxy modified coatings and higher heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites.",
publisher = "Springer Netherlands",
journal = "Journal of Materials Science: Materials in Electronics",
title = "The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites",
pages = "79-75",
number = "2",
volume = "14",
doi = "10.1023/A:1021948502150"
}
Milutinović Nikolić, A., Presburger Ulniković, V., Veličković, S.,& Aleksić, R.. (2003). The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites. in Journal of Materials Science: Materials in Electronics
Springer Netherlands., 14(2), 75-79.
https://doi.org/10.1023/A:1021948502150
Milutinović Nikolić A, Presburger Ulniković V, Veličković S, Aleksić R. The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites. in Journal of Materials Science: Materials in Electronics. 2003;14(2):75-79.
doi:10.1023/A:1021948502150 .
Milutinović Nikolić, Aleksandra, Presburger Ulniković, Vladanka, Veličković, Sava, Aleksić, Radoslav, "The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites" in Journal of Materials Science: Materials in Electronics, 14, no. 2 (2003):75-79,
https://doi.org/10.1023/A:1021948502150 . .
2
3
3