TY  - CONF
AU  - Bugarinović, Aleksandar
AU  - Srećković, Milesa
AU  - Jovanović, Dražen
AU  - Malović, Miodrag
AU  - Karastojković, Zoran
AU  - Drobnjak, Petar
AU  - Mirjanić, Vladan
AU  - Mirjanić, Đorđe
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7160
AB  - Postoje problemi koji treba da se rešavaju u nekoliko različitih grana medicine (fizikalna terapija, dermatologija, uopšteno medicina, uključujući stomatologiju, oftalmologiju i otorinolaringologiju i dr). Ako se koristi prednost različitih snopnih tehnika, pojavljuju se prirodno, iste potrebe i u sferi industrije, heritologije, forenzike. Na drugi način pojavljuje se trend da se, objedinjeno, koriste generalno ista rešenja sa modifikacijama u konkretnoj primeni. U radu je poseban akcent posvećen koherentnom elektromagnetnom zračenju, zadacima u vezi prilaza pojedinačnom slučaju, tehničkoj podršci softverske i hardverske prirode i dati su izabrani rezultati pojedinih interakcija ili slučajeva dobijene modulacije u širem smislu. Posmatran je i izabran potreban teoretski prilaz, kao baza za procenu objektivnih uslova, koji mogu da utiču pozitivno / negativno na dati tretman ili dijagnostiku.
AB  - There are problems that need to be solved for several different
branches of medicine (physical therapy, dermatology, medicine in
general, including dentistry, ophthalmology and
otorhinolaryngology, etc.). If the advantage of various beam
techniques is used, the same needs naturally appear in the sphere of
industry, heritology, and forensics.In order to obtain target
information on the time intervals of therapy, diagnostics and
modulation, it must be taken into account that each treatment of
individuals is a case for itself, related to the general premises of
appropriate dosimetry. That is why in the software there is a large
number of tasks for the operation and inclusion of all parameters
related to a particular case and for intrusions into the often selfstandardized protocols, which are found in the instructions for the
acquisition of new systems, related to Elion techniques. In another
way, there is a trend to use, unitedly, generally the same solutions
with modifications in specific application.
In the paper, a special accent is devoted to coherent
electromagnetic radiation, tasks related to the approach to individual
cases, technical support of a software and hardware nature, and
selected results of individual interactions or cases of received
modulation in a broader sense are given. The necessary theoretical
approach was observed and selected, as a basis for evaluating
objective conditions, which can have a positive / negative effect on
a given treatment or diagnosis.
PB  - Beograd : Društvo za ETRAN
PB  - Beograd : Akademska misao
C3  - Zbornik radova / LXVII konferencija ETRAN, Istočno Sarajevo, BiH, 05 - 08.06.2023.
T1  - Odabrane primene snopnih tehnika kao tehnička podrška u dijagnostici, modifikaciji materijala i karakterizaciji
T1  - Selected applications of beam techniques as technical support in diagnostics, material modification and characterization
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7160
ER  - 

@conference{
author = "Bugarinović, Aleksandar and Srećković, Milesa and Jovanović, Dražen and Malović, Miodrag and Karastojković, Zoran and Drobnjak, Petar and Mirjanić, Vladan and Mirjanić, Đorđe",
year = "2023",
abstract = "Postoje problemi koji treba da se rešavaju u nekoliko različitih grana medicine (fizikalna terapija, dermatologija, uopšteno medicina, uključujući stomatologiju, oftalmologiju i otorinolaringologiju i dr). Ako se koristi prednost različitih snopnih tehnika, pojavljuju se prirodno, iste potrebe i u sferi industrije, heritologije, forenzike. Na drugi način pojavljuje se trend da se, objedinjeno, koriste generalno ista rešenja sa modifikacijama u konkretnoj primeni. U radu je poseban akcent posvećen koherentnom elektromagnetnom zračenju, zadacima u vezi prilaza pojedinačnom slučaju, tehničkoj podršci softverske i hardverske prirode i dati su izabrani rezultati pojedinih interakcija ili slučajeva dobijene modulacije u širem smislu. Posmatran je i izabran potreban teoretski prilaz, kao baza za procenu objektivnih uslova, koji mogu da utiču pozitivno / negativno na dati tretman ili dijagnostiku., There are problems that need to be solved for several different
branches of medicine (physical therapy, dermatology, medicine in
general, including dentistry, ophthalmology and
otorhinolaryngology, etc.). If the advantage of various beam
techniques is used, the same needs naturally appear in the sphere of
industry, heritology, and forensics.In order to obtain target
information on the time intervals of therapy, diagnostics and
modulation, it must be taken into account that each treatment of
individuals is a case for itself, related to the general premises of
appropriate dosimetry. That is why in the software there is a large
number of tasks for the operation and inclusion of all parameters
related to a particular case and for intrusions into the often selfstandardized protocols, which are found in the instructions for the
acquisition of new systems, related to Elion techniques. In another
way, there is a trend to use, unitedly, generally the same solutions
with modifications in specific application.
In the paper, a special accent is devoted to coherent
electromagnetic radiation, tasks related to the approach to individual
cases, technical support of a software and hardware nature, and
selected results of individual interactions or cases of received
modulation in a broader sense are given. The necessary theoretical
approach was observed and selected, as a basis for evaluating
objective conditions, which can have a positive / negative effect on
a given treatment or diagnosis.",
publisher = "Beograd : Društvo za ETRAN, Beograd : Akademska misao",
journal = "Zbornik radova / LXVII konferencija ETRAN, Istočno Sarajevo, BiH, 05 - 08.06.2023.",
title = "Odabrane primene snopnih tehnika kao tehnička podrška u dijagnostici, modifikaciji materijala i karakterizaciji, Selected applications of beam techniques as technical support in diagnostics, material modification and characterization",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7160"
}

Bugarinović, A., Srećković, M., Jovanović, D., Malović, M., Karastojković, Z., Drobnjak, P., Mirjanić, V.,& Mirjanić, Đ.. (2023). Odabrane primene snopnih tehnika kao tehnička podrška u dijagnostici, modifikaciji materijala i karakterizaciji. in Zbornik radova / LXVII konferencija ETRAN, Istočno Sarajevo, BiH, 05 - 08.06.2023.
Beograd : Društvo za ETRAN..
https://hdl.handle.net/21.15107/rcub_technorep_7160

Bugarinović A, Srećković M, Jovanović D, Malović M, Karastojković Z, Drobnjak P, Mirjanić V, Mirjanić Đ. Odabrane primene snopnih tehnika kao tehnička podrška u dijagnostici, modifikaciji materijala i karakterizaciji. in Zbornik radova / LXVII konferencija ETRAN, Istočno Sarajevo, BiH, 05 - 08.06.2023.. 2023;.
https://hdl.handle.net/21.15107/rcub_technorep_7160 .

Bugarinović, Aleksandar, Srećković, Milesa, Jovanović, Dražen, Malović, Miodrag, Karastojković, Zoran, Drobnjak, Petar, Mirjanić, Vladan, Mirjanić, Đorđe, "Odabrane primene snopnih tehnika kao tehnička podrška u dijagnostici, modifikaciji materijala i karakterizaciji" in Zbornik radova / LXVII konferencija ETRAN, Istočno Sarajevo, BiH, 05 - 08.06.2023. (2023),
https://hdl.handle.net/21.15107/rcub_technorep_7160 .

TY  - CONF
AU  - Mrdak, Mihailo
AU  - Rakin, Marko
AU  - Bajić, Nikola
AU  - Veljić, Darko
AU  - Pekez, Jasmina
AU  - Karastojković, Zoran
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6337
AB  - The plasma spray coatings are subject to high influence of surface loads, corrosion, and temperatures
which cause damage in the form of separation of the coating from the substrate or flacking of the coating from
the substrate edges. Adhesion is the main factor that opposes the influence of the external loads, and defines the
quality of the bond of the coating with the substrate. Each type of coating has a determined quality of adhesion
as per appropriate standard in order to meet functional properties during operation.
There is no universal coating test for all types of the coatings, the test is chosen depending on the technology
used for the production of the coating, the type of material from which it was made and its thickness. One of the
many tests that are used for assessment of adhesion / cohesion strength of plasma spray coatings is the scratch
test. The aim of this paper was to evaluate the cohesive / adhesive strength of the plasma spray
Ni22Cr10Al1Yalloycoating. The testing was conducted using the Rockwell C diamond indenter with a tip radius
of 200 µm. The results showed that the scratch test is an efficient method for assessment of adhesion and
cohesion of plasma spray coatings.
PB  - University of Novi Sad Technical faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia
C3  - VIII International Conference Industrial Engineering and Environmental Protection
T1  - Determining the adhesion / cohesion strength of plasma spray coatings using the Rockwell - c method
EP  - 122
SP  - 119
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6337
ER  - 

@conference{
author = "Mrdak, Mihailo and Rakin, Marko and Bajić, Nikola and Veljić, Darko and Pekez, Jasmina and Karastojković, Zoran",
year = "2018",
abstract = "The plasma spray coatings are subject to high influence of surface loads, corrosion, and temperatures
which cause damage in the form of separation of the coating from the substrate or flacking of the coating from
the substrate edges. Adhesion is the main factor that opposes the influence of the external loads, and defines the
quality of the bond of the coating with the substrate. Each type of coating has a determined quality of adhesion
as per appropriate standard in order to meet functional properties during operation.
There is no universal coating test for all types of the coatings, the test is chosen depending on the technology
used for the production of the coating, the type of material from which it was made and its thickness. One of the
many tests that are used for assessment of adhesion / cohesion strength of plasma spray coatings is the scratch
test. The aim of this paper was to evaluate the cohesive / adhesive strength of the plasma spray
Ni22Cr10Al1Yalloycoating. The testing was conducted using the Rockwell C diamond indenter with a tip radius
of 200 µm. The results showed that the scratch test is an efficient method for assessment of adhesion and
cohesion of plasma spray coatings.",
publisher = "University of Novi Sad Technical faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia",
journal = "VIII International Conference Industrial Engineering and Environmental Protection",
title = "Determining the adhesion / cohesion strength of plasma spray coatings using the Rockwell - c method",
pages = "122-119",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6337"
}

Mrdak, M., Rakin, M., Bajić, N., Veljić, D., Pekez, J.,& Karastojković, Z.. (2018). Determining the adhesion / cohesion strength of plasma spray coatings using the Rockwell - c method. in VIII International Conference Industrial Engineering and Environmental Protection
University of Novi Sad Technical faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia., 119-122.
https://hdl.handle.net/21.15107/rcub_technorep_6337

Mrdak M, Rakin M, Bajić N, Veljić D, Pekez J, Karastojković Z. Determining the adhesion / cohesion strength of plasma spray coatings using the Rockwell - c method. in VIII International Conference Industrial Engineering and Environmental Protection. 2018;:119-122.
https://hdl.handle.net/21.15107/rcub_technorep_6337 .

Mrdak, Mihailo, Rakin, Marko, Bajić, Nikola, Veljić, Darko, Pekez, Jasmina, Karastojković, Zoran, "Determining the adhesion / cohesion strength of plasma spray coatings using the Rockwell - c method" in VIII International Conference Industrial Engineering and Environmental Protection (2018):119-122,
https://hdl.handle.net/21.15107/rcub_technorep_6337 .