TY  - JOUR
AU  - Eramah, Abdsalam M.
AU  - Rakin, Marko
AU  - Veljić, Darko
AU  - Tadić, Srđan
AU  - Radović, Nenad
AU  - Zrilić, Milorad
AU  - Perović, Milenko
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2676
AB  - The aim of this work is to analyse the process of friction stir welding (FSW) of 3 mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. Friction Stir Welding is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone). Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints
EP  - S28
SP  - S21
VL  - 18
DO  - 10.2298/TSCI130307170E
ER  - 

@article{
author = "Eramah, Abdsalam M. and Rakin, Marko and Veljić, Darko and Tadić, Srđan and Radović, Nenad and Zrilić, Milorad and Perović, Milenko",
year = "2014",
abstract = "The aim of this work is to analyse the process of friction stir welding (FSW) of 3 mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. Friction Stir Welding is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone). Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints",
pages = "S28-S21",
volume = "18",
doi = "10.2298/TSCI130307170E"
}

Eramah, A. M., Rakin, M., Veljić, D., Tadić, S., Radović, N., Zrilić, M.,& Perović, M.. (2014). Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 18, S21-S28.
https://doi.org/10.2298/TSCI130307170E

Eramah AM, Rakin M, Veljić D, Tadić S, Radović N, Zrilić M, Perović M. Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints. in Thermal Science. 2014;18:S21-S28.
doi:10.2298/TSCI130307170E .

Eramah, Abdsalam M., Rakin, Marko, Veljić, Darko, Tadić, Srđan, Radović, Nenad, Zrilić, Milorad, Perović, Milenko, "Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints" in Thermal Science, 18 (2014):S21-S28,
https://doi.org/10.2298/TSCI130307170E . .