Dojčinović, M., Pavlović, M., Andrić, L., Petrov, M.,& Radulović, D. S.. (2023). Optimizacija i unapređenje sinteze i karakterizacije bazaltnog liva. .
https://hdl.handle.net/21.15107/rcub_technorep_7010

Dojčinović M, Pavlović M, Andrić L, Petrov M, Radulović DS. Optimizacija i unapređenje sinteze i karakterizacije bazaltnog liva. 2023;.
https://hdl.handle.net/21.15107/rcub_technorep_7010 .

Dojčinović, Marina, Pavlović, Marko, Andrić, Ljubiša, Petrov, Milan, Radulović, Dragan S., "Optimizacija i unapređenje sinteze i karakterizacije bazaltnog liva" (2023),
https://hdl.handle.net/21.15107/rcub_technorep_7010 .

Prokić-Cvetković, R., Dojčinović, M., Pavlović, M., Andrić, L., Petrov, M.,& Radulović, D.. (2020). Sinteza i karakterizacija sinterovanog bazalta sa poboljšanom otpornošću na dejstvo kavitacije. .
https://hdl.handle.net/21.15107/rcub_technorep_7031

Prokić-Cvetković R, Dojčinović M, Pavlović M, Andrić L, Petrov M, Radulović D. Sinteza i karakterizacija sinterovanog bazalta sa poboljšanom otpornošću na dejstvo kavitacije. 2020;.
https://hdl.handle.net/21.15107/rcub_technorep_7031 .

Prokić-Cvetković, Radica, Dojčinović, Marina, Pavlović, Marko, Andrić, Ljubiša, Petrov, Milan, Radulović, Dragan, "Sinteza i karakterizacija sinterovanog bazalta sa poboljšanom otpornošću na dejstvo kavitacije" (2020),
https://hdl.handle.net/21.15107/rcub_technorep_7031 .

TY  - JOUR
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Marko
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5755
AB  - This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting process. Design and optimization of a coating composition with controlled rheological properties and synthesis were achieved by applying different coating components, suspension agents and fillers and by altering the coating-production procedure. A morphological and microstructural analysis of the fillers was carried out with scanning electron microscopy. An X-ray diffraction analysis was applied to determine and monitor the phase-composition changes of the refractory fillers. The particle size and shape were assessed with the PC software application package OZARIA 2.5. To assess the effects of the applications of individual refractory coatings, a detailed investigation of the structural and mechanical properties of the mouldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on the mouldings. Radiographic moulding tests were carried out with an X-ray device, SAIFORT type-S200. The attained results are essential for the synthesis of the refractory coatings based on high-temperature fillers and their applications in the lost-foam casting process for manufacturing the mouldings with in-advance-set properties.
PB  - Inst Za Kovinske Materiale I In Tehnologie, Ljubjana
T2  - Materiali in tehnologije
T1  - Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting
EP  - 164
IS  - 1
SP  - 157
VL  - 49
UR  - https://hdl.handle.net/21.15107/rcub_rims_277
ER  - 

@article{
author = "Aćimović-Pavlović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Marko",
year = "2015",
abstract = "This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting process. Design and optimization of a coating composition with controlled rheological properties and synthesis were achieved by applying different coating components, suspension agents and fillers and by altering the coating-production procedure. A morphological and microstructural analysis of the fillers was carried out with scanning electron microscopy. An X-ray diffraction analysis was applied to determine and monitor the phase-composition changes of the refractory fillers. The particle size and shape were assessed with the PC software application package OZARIA 2.5. To assess the effects of the applications of individual refractory coatings, a detailed investigation of the structural and mechanical properties of the mouldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on the mouldings. Radiographic moulding tests were carried out with an X-ray device, SAIFORT type-S200. The attained results are essential for the synthesis of the refractory coatings based on high-temperature fillers and their applications in the lost-foam casting process for manufacturing the mouldings with in-advance-set properties.",
publisher = "Inst Za Kovinske Materiale I In Tehnologie, Ljubjana",
journal = "Materiali in tehnologije",
title = "Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting",
pages = "164-157",
number = "1",
volume = "49",
url = "https://hdl.handle.net/21.15107/rcub_rims_277"
}

Aćimović-Pavlović, Z., Terzić, A., Andrić, L.,& Pavlović, M.. (2015). Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting. in Materiali in tehnologije
Inst Za Kovinske Materiale I In Tehnologie, Ljubjana., 49(1), 157-164.
https://hdl.handle.net/21.15107/rcub_rims_277

Aćimović-Pavlović Z, Terzić A, Andrić L, Pavlović M. Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting. in Materiali in tehnologije. 2015;49(1):157-164.
https://hdl.handle.net/21.15107/rcub_rims_277 .

Aćimović-Pavlović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Marko, "Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting" in Materiali in tehnologije, 49, no. 1 (2015):157-164,
https://hdl.handle.net/21.15107/rcub_rims_277 .

TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Andrić, Ljubiša
AU  - Stojanović, Jovica
AU  - Terzić, Anja
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5748
AB  - U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih komponenata premaza, naročito primenom novog veziva na bazi suspenzije i variranjem načina spravljanja premaza. Čestice cirkonskoh praha veličine 25×10-6 m su korišćene kao ispuna. Uzorak cirkona ispitivan je pomoću sledećih metoda: difrakcija X-zraka, diferencijalna termalna analiza i mikroskopija. Oblik i veličina zrna su analizirani pomoću računarskog programa za analizu slike OZARIA 2.5. Pokazano je da primena ovih premaza na bazi vode i alkohola ima pozitivan uticaj na kvalitet površine, tj. na strukturne i mehaničke karakteristike odlivaka livenog gvožđa koji su dobijeni metodom livenja u peščane kalupe i pomoću isparljivih modela (Lost Foam metoda livenja).
AB  - In this work, a possibility to develop a new zircon-based refractory coating for casting applications was investigated. Optimization of the coating composition with controlled rheological properties was attained by application of different coating components, particularly by application of a new suspension agent and by alteration of coating production procedure. Zircon powder with particle size of 25×10-6 m was used as filler. The zircon sample was investigated by means of X-ray diffraction analysis, diffraction thermal analysis and polarized microscopy. The shape and grain size were analyzed using OZARIA 2.5 software. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of cast iron obtained by pouring into sand molds by means of the expandable patterns method (Lost Foam casting process).
PB  - Savez hemijskih inženjera, Beograd
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja
T1  - Zircon-based coating for the applications in Lost Foam casting process
EP  - 593
IS  - 4
SP  - 587
VL  - 18
DO  - 10.2298/CICEQ111122034P
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Andrić, Ljubiša and Stojanović, Jovica and Terzić, Anja",
year = "2012",
abstract = "U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih komponenata premaza, naročito primenom novog veziva na bazi suspenzije i variranjem načina spravljanja premaza. Čestice cirkonskoh praha veličine 25×10-6 m su korišćene kao ispuna. Uzorak cirkona ispitivan je pomoću sledećih metoda: difrakcija X-zraka, diferencijalna termalna analiza i mikroskopija. Oblik i veličina zrna su analizirani pomoću računarskog programa za analizu slike OZARIA 2.5. Pokazano je da primena ovih premaza na bazi vode i alkohola ima pozitivan uticaj na kvalitet površine, tj. na strukturne i mehaničke karakteristike odlivaka livenog gvožđa koji su dobijeni metodom livenja u peščane kalupe i pomoću isparljivih modela (Lost Foam metoda livenja)., In this work, a possibility to develop a new zircon-based refractory coating for casting applications was investigated. Optimization of the coating composition with controlled rheological properties was attained by application of different coating components, particularly by application of a new suspension agent and by alteration of coating production procedure. Zircon powder with particle size of 25×10-6 m was used as filler. The zircon sample was investigated by means of X-ray diffraction analysis, diffraction thermal analysis and polarized microscopy. The shape and grain size were analyzed using OZARIA 2.5 software. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of cast iron obtained by pouring into sand molds by means of the expandable patterns method (Lost Foam casting process).",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja, Zircon-based coating for the applications in Lost Foam casting process",
pages = "593-587",
number = "4",
volume = "18",
doi = "10.2298/CICEQ111122034P"
}

Prstić, A., Aćimović-Pavlović, Z., Andrić, L., Stojanović, J.,& Terzić, A.. (2012). Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja. in Chemical Industry and Chemical Engineering Quarterly / CICEQ
Savez hemijskih inženjera, Beograd., 18(4), 587-593.
https://doi.org/10.2298/CICEQ111122034P

Prstić A, Aćimović-Pavlović Z, Andrić L, Stojanović J, Terzić A. Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2012;18(4):587-593.
doi:10.2298/CICEQ111122034P .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Andrić, Ljubiša, Stojanović, Jovica, Terzić, Anja, "Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 18, no. 4 (2012):587-593,
https://doi.org/10.2298/CICEQ111122034P . .