TY  - JOUR
AU  - Topalović, Vladimir
AU  - Nikolić, Jelena
AU  - Matijašević, Srđan
AU  - Stojanović, Jovica
AU  - Karamanov, Alexander
AU  - Grujić, Snežana
AU  - Jevtić, Sanja
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5272
AB  - The goal of this research is to investigate the effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of polyphosphate glasses. Differential scanning calorimetry (DSC), hot stage microscopy (HSM), X-ray diffraction (XRD), and scanning electron microscopy (SEM) methods were used to investigate the crystallization and sintering behaviors of glasses. The addition of SrO and La2O3 (1 or 5%), at the expense of phosphate mole fraction in polyphosphate bioactive glass, raises the characteristic temperature of glasses, and resistance to crystallization. Furthermore, the temperature of maximal shrinkage increases with the addition of SrO and La2O3. Surface crystallization is the dominant mechanism of crystallization in all samples. All glasses show complex crystallization leading to the formation of several crystalline phases. Sintered phosphate glass–ceramic containing bioactive β-CaP2O6, α-Ca3(PO4)2, and β-Ca3(PO4)2 phases were successfully prepared.
PB  - Springer Science and Business Media B.V.
T2  - Journal of Thermal Analysis and Calorimetry
T1  - The effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of distinct polyphosphate glasses
DO  - 10.1007/s10973-022-11777-8
ER  - 

@article{
author = "Topalović, Vladimir and Nikolić, Jelena and Matijašević, Srđan and Stojanović, Jovica and Karamanov, Alexander and Grujić, Snežana and Jevtić, Sanja",
year = "2022",
abstract = "The goal of this research is to investigate the effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of polyphosphate glasses. Differential scanning calorimetry (DSC), hot stage microscopy (HSM), X-ray diffraction (XRD), and scanning electron microscopy (SEM) methods were used to investigate the crystallization and sintering behaviors of glasses. The addition of SrO and La2O3 (1 or 5%), at the expense of phosphate mole fraction in polyphosphate bioactive glass, raises the characteristic temperature of glasses, and resistance to crystallization. Furthermore, the temperature of maximal shrinkage increases with the addition of SrO and La2O3. Surface crystallization is the dominant mechanism of crystallization in all samples. All glasses show complex crystallization leading to the formation of several crystalline phases. Sintered phosphate glass–ceramic containing bioactive β-CaP2O6, α-Ca3(PO4)2, and β-Ca3(PO4)2 phases were successfully prepared.",
publisher = "Springer Science and Business Media B.V.",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "The effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of distinct polyphosphate glasses",
doi = "10.1007/s10973-022-11777-8"
}

Topalović, V., Nikolić, J., Matijašević, S., Stojanović, J., Karamanov, A., Grujić, S.,& Jevtić, S.. (2022). The effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of distinct polyphosphate glasses. in Journal of Thermal Analysis and Calorimetry
Springer Science and Business Media B.V...
https://doi.org/10.1007/s10973-022-11777-8

Topalović V, Nikolić J, Matijašević S, Stojanović J, Karamanov A, Grujić S, Jevtić S. The effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of distinct polyphosphate glasses. in Journal of Thermal Analysis and Calorimetry. 2022;.
doi:10.1007/s10973-022-11777-8 .

Topalović, Vladimir, Nikolić, Jelena, Matijašević, Srđan, Stojanović, Jovica, Karamanov, Alexander, Grujić, Snežana, Jevtić, Sanja, "The effect of SrO and La2O3 addition on the crystallization characteristics and sintering behavior of distinct polyphosphate glasses" in Journal of Thermal Analysis and Calorimetry (2022),
https://doi.org/10.1007/s10973-022-11777-8 . .

TY  - JOUR
AU  - Karamanov, Alexander
AU  - Smiljanić, Sonja
AU  - Karamanova, Emilia
AU  - Matijašević, Srđan D.
AU  - Nikolić, Jelena
AU  - Savić, Veljko
AU  - Grujić, Snežana
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4386
AB  - Sintering, crystallization and foaming of nano glass powders with composition La2O3 center dot SrO center dot 5B(2)O(3) were studied by hot stage microscopy (HSM) and simultaneous thermal analysis (DTA-TG) under non-isothermal regime at 10 degrees C/min and by optical contactless dilatometer under isothermal conditions at 700 degrees C up to 10 hours for different times. After the thermal treatments, specimens were characterized by gas pycnometry, X-ray Powder Diffraction (XRD) and Field Emission Scanning Electron Microscopes (FE-SEM). The results demonstrate that the densification completed before the crystallization process, thus forming well sintered samples. Then, during the phase formation gas is released, which leads to foaming process. After holding of 160 minutes at 700 degrees C the degree of crystallization reached about 0.8 and the foaming stopped. The obtained sample had high closed porosity and quite intriguing structure composed of two fairly different crystal arrangements. The first was "sponge-like", while the second was denser and consisted of "sheets", 10-30 nm thick. The subsequent holding led to re-crystallization, formation of larger denser zones that reached even 10-15 mu m and an increase in open porosity. These results highlight that in the case of sinter crystallization of nano powders, some intriguing features can be expected.
PB  - Elsevier, Amsterdam
T2  - Journal of Non-Crystalline Solids
T1  - Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders: effect of the holding time
VL  - 544
DO  - 10.1016/j.jnoncrysol.2020.120168
ER  - 

@article{
author = "Karamanov, Alexander and Smiljanić, Sonja and Karamanova, Emilia and Matijašević, Srđan D. and Nikolić, Jelena and Savić, Veljko and Grujić, Snežana",
year = "2020",
abstract = "Sintering, crystallization and foaming of nano glass powders with composition La2O3 center dot SrO center dot 5B(2)O(3) were studied by hot stage microscopy (HSM) and simultaneous thermal analysis (DTA-TG) under non-isothermal regime at 10 degrees C/min and by optical contactless dilatometer under isothermal conditions at 700 degrees C up to 10 hours for different times. After the thermal treatments, specimens were characterized by gas pycnometry, X-ray Powder Diffraction (XRD) and Field Emission Scanning Electron Microscopes (FE-SEM). The results demonstrate that the densification completed before the crystallization process, thus forming well sintered samples. Then, during the phase formation gas is released, which leads to foaming process. After holding of 160 minutes at 700 degrees C the degree of crystallization reached about 0.8 and the foaming stopped. The obtained sample had high closed porosity and quite intriguing structure composed of two fairly different crystal arrangements. The first was "sponge-like", while the second was denser and consisted of "sheets", 10-30 nm thick. The subsequent holding led to re-crystallization, formation of larger denser zones that reached even 10-15 mu m and an increase in open porosity. These results highlight that in the case of sinter crystallization of nano powders, some intriguing features can be expected.",
publisher = "Elsevier, Amsterdam",
journal = "Journal of Non-Crystalline Solids",
title = "Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders: effect of the holding time",
volume = "544",
doi = "10.1016/j.jnoncrysol.2020.120168"
}

Karamanov, A., Smiljanić, S., Karamanova, E., Matijašević, S. D., Nikolić, J., Savić, V.,& Grujić, S.. (2020). Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders: effect of the holding time. in Journal of Non-Crystalline Solids
Elsevier, Amsterdam., 544.
https://doi.org/10.1016/j.jnoncrysol.2020.120168

Karamanov A, Smiljanić S, Karamanova E, Matijašević SD, Nikolić J, Savić V, Grujić S. Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders: effect of the holding time. in Journal of Non-Crystalline Solids. 2020;544.
doi:10.1016/j.jnoncrysol.2020.120168 .

Karamanov, Alexander, Smiljanić, Sonja, Karamanova, Emilia, Matijašević, Srđan D., Nikolić, Jelena, Savić, Veljko, Grujić, Snežana, "Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders: effect of the holding time" in Journal of Non-Crystalline Solids, 544 (2020),
https://doi.org/10.1016/j.jnoncrysol.2020.120168 . .

TY  - JOUR
AU  - Smiljanić, Sonja
AU  - Karamanova, Emilia
AU  - Grujić, Snežana
AU  - Rogan, Jelena
AU  - Stojanović, Jovica
AU  - Matijašević, Srđan D.
AU  - Karamanov, Alexander
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3989
AB  - The peculiarities of sinter-crystallization of La2O3 center dot SrO center dot 5B(2)O(3) fine glass powder (below 1 mu m) are investigated and discussed. The sintering was studied by contactless optical dilatometry and porosity measurements. The crystallization process was evaluated by differential scanning calorimetry (DSC) and the crystalline phase formation was analyzed by X-ray diffraction (XRD). Finally the microstructures of the samples sintered at different temperatures were observed by field emission scanning electron microscope (FESEM). The specific aim of this study was to highlight the influence of sintering temperature and heating rate on the densification process and the final structure of glass-ceramic samples. It was shown that zero water adsorption and minimum closed porosity of similar to 3% were obtained at heating rate of 2 degrees C/min and at about 1 h holding at 690 degrees C. The temperature increase accelerated intense foaming process that resulted in formation of total porosity of 35-45%. It was also demonstrated that the foaming depended on the heating rate: the higher the heating rate - the more intensive was the bloating. The observed foaming process was related to intensive crystallization and re-crystallization of La2O3 center dot SrO center dot 5B(2)O(3) crystal phase. The phase formation processes entirely completed after 30-60 min at 730-740 degrees C with the formation of intriguing and unusual crystal structures.
PB  - Elsevier Science Bv, Amsterdam
T2  - Journal of Non-Crystalline Solids
T1  - Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders - effect of the holding temperature and the heating rate
EP  - 382
SP  - 375
VL  - 481
DO  - 10.1016/j.jnoncrysol.2017.11.009
ER  - 

@article{
author = "Smiljanić, Sonja and Karamanova, Emilia and Grujić, Snežana and Rogan, Jelena and Stojanović, Jovica and Matijašević, Srđan D. and Karamanov, Alexander",
year = "2018",
abstract = "The peculiarities of sinter-crystallization of La2O3 center dot SrO center dot 5B(2)O(3) fine glass powder (below 1 mu m) are investigated and discussed. The sintering was studied by contactless optical dilatometry and porosity measurements. The crystallization process was evaluated by differential scanning calorimetry (DSC) and the crystalline phase formation was analyzed by X-ray diffraction (XRD). Finally the microstructures of the samples sintered at different temperatures were observed by field emission scanning electron microscope (FESEM). The specific aim of this study was to highlight the influence of sintering temperature and heating rate on the densification process and the final structure of glass-ceramic samples. It was shown that zero water adsorption and minimum closed porosity of similar to 3% were obtained at heating rate of 2 degrees C/min and at about 1 h holding at 690 degrees C. The temperature increase accelerated intense foaming process that resulted in formation of total porosity of 35-45%. It was also demonstrated that the foaming depended on the heating rate: the higher the heating rate - the more intensive was the bloating. The observed foaming process was related to intensive crystallization and re-crystallization of La2O3 center dot SrO center dot 5B(2)O(3) crystal phase. The phase formation processes entirely completed after 30-60 min at 730-740 degrees C with the formation of intriguing and unusual crystal structures.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Journal of Non-Crystalline Solids",
title = "Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders - effect of the holding temperature and the heating rate",
pages = "382-375",
volume = "481",
doi = "10.1016/j.jnoncrysol.2017.11.009"
}

Smiljanić, S., Karamanova, E., Grujić, S., Rogan, J., Stojanović, J., Matijašević, S. D.,& Karamanov, A.. (2018). Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders - effect of the holding temperature and the heating rate. in Journal of Non-Crystalline Solids
Elsevier Science Bv, Amsterdam., 481, 375-382.
https://doi.org/10.1016/j.jnoncrysol.2017.11.009

Smiljanić S, Karamanova E, Grujić S, Rogan J, Stojanović J, Matijašević SD, Karamanov A. Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders - effect of the holding temperature and the heating rate. in Journal of Non-Crystalline Solids. 2018;481:375-382.
doi:10.1016/j.jnoncrysol.2017.11.009 .

Smiljanić, Sonja, Karamanova, Emilia, Grujić, Snežana, Rogan, Jelena, Stojanović, Jovica, Matijašević, Srđan D., Karamanov, Alexander, "Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders - effect of the holding temperature and the heating rate" in Journal of Non-Crystalline Solids, 481 (2018):375-382,
https://doi.org/10.1016/j.jnoncrysol.2017.11.009 . .