TY  - JOUR
AU  - Obradović, Vera
AU  - Stojanović, D.
AU  - Grković, Mirjana
AU  - Živković, Irena
AU  - Radojević, Vesna
AU  - Uskoković, Petar
AU  - Aleksić, Radoslav
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2324
AB  - In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The solution was impregnated on both sides of each of the fabrics. All composite samples consisted of four layers of the impregnated fabrics. The MWCNT/PVB content was 0, 0.1 and 1 wt.%. The three samples of the fabrics with different MWCNT/PVB content were coated with y-aminopropyltriethoxysilane (AMEO silane)/ethanol solution due to the surface modification. The mechanical properties of the prepared composite samples were studied by dynamic mechanical analysis (DMA). The 60% increase in storage modulus was achieved by addition of MWCNT and impregnation of aramid fabrics with AMEO silane. The pristine multiwalled carbon nanotubes (MWCNT) were introduced in order to enhance additionally the mechanical properties of the materials for ballistic protection.
PB  - Association of Metallurgical Engineers of Serbia
T2  - Metallurgical & Materials Engineering
T1  - Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
EP  - 266
IS  - 3
SP  - 259
VL  - 19
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2324
ER  - 

@article{
author = "Obradović, Vera and Stojanović, D. and Grković, Mirjana and Živković, Irena and Radojević, Vesna and Uskoković, Petar and Aleksić, Radoslav",
year = "2013",
abstract = "In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The solution was impregnated on both sides of each of the fabrics. All composite samples consisted of four layers of the impregnated fabrics. The MWCNT/PVB content was 0, 0.1 and 1 wt.%. The three samples of the fabrics with different MWCNT/PVB content were coated with y-aminopropyltriethoxysilane (AMEO silane)/ethanol solution due to the surface modification. The mechanical properties of the prepared composite samples were studied by dynamic mechanical analysis (DMA). The 60% increase in storage modulus was achieved by addition of MWCNT and impregnation of aramid fabrics with AMEO silane. The pristine multiwalled carbon nanotubes (MWCNT) were introduced in order to enhance additionally the mechanical properties of the materials for ballistic protection.",
publisher = "Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical & Materials Engineering",
title = "Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution",
pages = "266-259",
number = "3",
volume = "19",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2324"
}

Obradović, V., Stojanović, D., Grković, M., Živković, I., Radojević, V., Uskoković, P.,& Aleksić, R.. (2013). Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution. in Metallurgical & Materials Engineering
Association of Metallurgical Engineers of Serbia., 19(3), 259-266.
https://hdl.handle.net/21.15107/rcub_technorep_2324

Obradović V, Stojanović D, Grković M, Živković I, Radojević V, Uskoković P, Aleksić R. Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution. in Metallurgical & Materials Engineering. 2013;19(3):259-266.
https://hdl.handle.net/21.15107/rcub_technorep_2324 .

Obradović, Vera, Stojanović, D., Grković, Mirjana, Živković, Irena, Radojević, Vesna, Uskoković, Petar, Aleksić, Radoslav, "Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution" in Metallurgical & Materials Engineering, 19, no. 3 (2013):259-266,
https://hdl.handle.net/21.15107/rcub_technorep_2324 .

TY  - JOUR
AU  - Grujić, Aleksandar
AU  - Talijan, Nadežda M.
AU  - Stojanović, D.
AU  - Stajić-Trošić, Jasna
AU  - Burzić, Z.
AU  - Balanović, Ljubiša
AU  - Aleksić, Radoslav
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5604
AB  - Many of modern technologies require materials with unusual combinations of properties that cannot be met by the conventional metal alloys, ceramics, and polymeric materials. Material property combinations and ranges have been extended by the development of composite materials. Development of Nd-Fe-B/polymer composite magnetic materials has significantly increased interest in research and development of bonded magnets, since particles of Nd-Fe-B alloys are proved to be very suitable for their production. This study investigates the mechanical and magnetic properties of compression molded Nd-Fe-B magnets with different content of magnetic powder in epoxy matrix. Mechanical properties were investigated at ambient temperature according to ASTM standard D 3039-00. The obtained results show that tensile strength and elongation decrease with an increase of Nd-Fe-B particles content in epoxy matrix. The modulus of elasticity increases, which means that in exploitation material with higher magnetic powder content, subjected to the same level of stress, undergoes 2 to 3.5 times smaller deformation. Scanning Electron Microscopy (SEM) was used to examine the morphology of sample surfaces and fracture surfaces caused by the tensile strength tests. The results of SQUID magnetic measurements show an increase of magnetic properties of the investigated composites with increasing content of Nd-Fe-B particles.
PB  - Technical Faculty, Bor
T2  - Journal of Mining and Metallurgy B: Metallurgy
T1  - Mechanical and magnetic properties of composite materials with polymer matrix
EP  - 32
IS  - 1
SP  - 25
VL  - 46
DO  - 10.2298/JMMB1001025G
ER  - 

@article{
author = "Grujić, Aleksandar and Talijan, Nadežda M. and Stojanović, D. and Stajić-Trošić, Jasna and Burzić, Z. and Balanović, Ljubiša and Aleksić, Radoslav",
year = "2010",
abstract = "Many of modern technologies require materials with unusual combinations of properties that cannot be met by the conventional metal alloys, ceramics, and polymeric materials. Material property combinations and ranges have been extended by the development of composite materials. Development of Nd-Fe-B/polymer composite magnetic materials has significantly increased interest in research and development of bonded magnets, since particles of Nd-Fe-B alloys are proved to be very suitable for their production. This study investigates the mechanical and magnetic properties of compression molded Nd-Fe-B magnets with different content of magnetic powder in epoxy matrix. Mechanical properties were investigated at ambient temperature according to ASTM standard D 3039-00. The obtained results show that tensile strength and elongation decrease with an increase of Nd-Fe-B particles content in epoxy matrix. The modulus of elasticity increases, which means that in exploitation material with higher magnetic powder content, subjected to the same level of stress, undergoes 2 to 3.5 times smaller deformation. Scanning Electron Microscopy (SEM) was used to examine the morphology of sample surfaces and fracture surfaces caused by the tensile strength tests. The results of SQUID magnetic measurements show an increase of magnetic properties of the investigated composites with increasing content of Nd-Fe-B particles.",
publisher = "Technical Faculty, Bor",
journal = "Journal of Mining and Metallurgy B: Metallurgy",
title = "Mechanical and magnetic properties of composite materials with polymer matrix",
pages = "32-25",
number = "1",
volume = "46",
doi = "10.2298/JMMB1001025G"
}

Grujić, A., Talijan, N. M., Stojanović, D., Stajić-Trošić, J., Burzić, Z., Balanović, L.,& Aleksić, R.. (2010). Mechanical and magnetic properties of composite materials with polymer matrix. in Journal of Mining and Metallurgy B: Metallurgy
Technical Faculty, Bor., 46(1), 25-32.
https://doi.org/10.2298/JMMB1001025G

Grujić A, Talijan NM, Stojanović D, Stajić-Trošić J, Burzić Z, Balanović L, Aleksić R. Mechanical and magnetic properties of composite materials with polymer matrix. in Journal of Mining and Metallurgy B: Metallurgy. 2010;46(1):25-32.
doi:10.2298/JMMB1001025G .

Grujić, Aleksandar, Talijan, Nadežda M., Stojanović, D., Stajić-Trošić, Jasna, Burzić, Z., Balanović, Ljubiša, Aleksić, Radoslav, "Mechanical and magnetic properties of composite materials with polymer matrix" in Journal of Mining and Metallurgy B: Metallurgy, 46, no. 1 (2010):25-32,
https://doi.org/10.2298/JMMB1001025G . .

TY  - JOUR
AU  - Kojić, Zvezdana
AU  - Stojanović, D.
AU  - Popadić, S.
AU  - Jokanović, M.
AU  - Janaćković, Đorđe
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1355
AB  - The aim of this study was to assess the irritant properties of a new developed calcium phosphate ceramic, α-tricalcium phosphate (α-TCP) after single application to intact skin of the rabbit. The test substance, α-TCP was produced by modified hydrothermal method and prepared in two different forms, as a solid material (disc 5 x 2 mm) and paste. Both, solid material and paste of α-TCP were evaluated for primary skin irritation to the ISO 10993-10:2002/Amd 1:2006 Biological Evaluation of Medical Devices - Part 10. At the end of the study macroscopic examination of the skin was performed. In this model, general and local tolerances were good. Score of primary irritation (SPI) and primary irritation index (PII) of α-TCP for both, solid material and paste, revealed that there was no significant toxicity/irritability (PII = 0.0) as compared to the negative control (PII = 0.0). Positive control did cause significant skin irritation in acute irritation test using Draize technique in rabbit model (PII = 2.11). Based on present results, it can be concluded that the the irritation potential of the tested material is negligible. However, other procedures for preclinical safety assessments of the α-TCP material are needed in order to completely elucidate its toxic potential.
PB  - General Physiol And Biophysics, Bratislava
T2  - General Physiology and Biophysics
T1  - The irritative property of α-tricalcium phosphate to the rabbit skin
EP  - 173
IS  - SPECIAL ISSUES
SP  - 168
VL  - 28
DO  - 10.4149/gpb_2009_02_168
ER  - 

@article{
author = "Kojić, Zvezdana and Stojanović, D. and Popadić, S. and Jokanović, M. and Janaćković, Đorđe",
year = "2009",
abstract = "The aim of this study was to assess the irritant properties of a new developed calcium phosphate ceramic, α-tricalcium phosphate (α-TCP) after single application to intact skin of the rabbit. The test substance, α-TCP was produced by modified hydrothermal method and prepared in two different forms, as a solid material (disc 5 x 2 mm) and paste. Both, solid material and paste of α-TCP were evaluated for primary skin irritation to the ISO 10993-10:2002/Amd 1:2006 Biological Evaluation of Medical Devices - Part 10. At the end of the study macroscopic examination of the skin was performed. In this model, general and local tolerances were good. Score of primary irritation (SPI) and primary irritation index (PII) of α-TCP for both, solid material and paste, revealed that there was no significant toxicity/irritability (PII = 0.0) as compared to the negative control (PII = 0.0). Positive control did cause significant skin irritation in acute irritation test using Draize technique in rabbit model (PII = 2.11). Based on present results, it can be concluded that the the irritation potential of the tested material is negligible. However, other procedures for preclinical safety assessments of the α-TCP material are needed in order to completely elucidate its toxic potential.",
publisher = "General Physiol And Biophysics, Bratislava",
journal = "General Physiology and Biophysics",
title = "The irritative property of α-tricalcium phosphate to the rabbit skin",
pages = "173-168",
number = "SPECIAL ISSUES",
volume = "28",
doi = "10.4149/gpb_2009_02_168"
}

Kojić, Z., Stojanović, D., Popadić, S., Jokanović, M.,& Janaćković, Đ.. (2009). The irritative property of α-tricalcium phosphate to the rabbit skin. in General Physiology and Biophysics
General Physiol And Biophysics, Bratislava., 28(SPECIAL ISSUES), 168-173.
https://doi.org/10.4149/gpb_2009_02_168

Kojić Z, Stojanović D, Popadić S, Jokanović M, Janaćković Đ. The irritative property of α-tricalcium phosphate to the rabbit skin. in General Physiology and Biophysics. 2009;28(SPECIAL ISSUES):168-173.
doi:10.4149/gpb_2009_02_168 .

Kojić, Zvezdana, Stojanović, D., Popadić, S., Jokanović, M., Janaćković, Đorđe, "The irritative property of α-tricalcium phosphate to the rabbit skin" in General Physiology and Biophysics, 28, no. SPECIAL ISSUES (2009):168-173,
https://doi.org/10.4149/gpb_2009_02_168 . .

TY  - JOUR
AU  - Stojanović, D.
AU  - Janaćković, Đorđe
AU  - Marković, Danica
AU  - Tasić, Goran
AU  - Aleksandrić, B.
AU  - Kojić, Zvezdana
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1255
AB  - Calcium phosphate ceramics are among the more commonly used and biocompatible ceramics. Recently, we have synthesized a new calcium phosphate ceramic, alpha tricalcium phosphate (aTCP). The aim of this study was to assess the biocompatibility of this original, in our laboratory modified, newly synthesized aTCP ceramic, by carefully evaluating the inflammatory reaction of soft tissue in response to its subcutaneous implantation, and by comparing this result with the results of already widely used virtually non-toxic, non-immunogenic, and almost chemically inert dental (DC) and hydroxy apatite (HAP) ceramics. Implants (diameter 5x2 mm) of aTCP, DC and HAP were implanted into 12 adult male rats subcutaneously. At 2 weeks and 12 weeks post-implantation, the animals were euthanized and the tissueimplant reactions were analyzed histologically. Evaluation of routine stained sections (5 μm, hematoxylin & eosin) of the cutis and subcutis surrounding the aTCP, DC and HAP ceramics revealed the following: 1) all the ceramic devices had fibrous connective tissue capsules; 2) there were significant differences in the tissue - implant reactions based on the estimated time, while there were no differences in the tissue-implant reaction based on the type of ceramic material; 3) two weeks after implantation hyperemia and cellular proliferation were the most expressive results, while twelve weeks after implantation extensive angiogenesis and collagen fibers production were the prominent findings for all types of implanted calcium phosphate ceramics.
AB  - Podaci iz literature ukazuju da se kalcijum fosfatna keramika ubraja među najčešće korišćene i biološki najkompatibilnije keramičke materijale koji se danas primenjuju u medicini. U našoj laboratoriji sintetisana je nova vrsta kalcijum fosfatne keramike, alfa-trikalcijum fosfat (aTCP). Cilj ovog rada je bio da se proceni biokompatibilnost ovog, modifikovanog, novosintetisanog aTCP, putem pažljive procene inflamatorne reakcije mekog tkiva koja nastaje kao odgovor na njegovu subkutanu implantaciju i putem upoređivanja ovih rezultata sa rezultatima subku- tane implantacije dentalne keramike (DC) i hidroksiapatita (HAP), koji su ne-toksični, ne-imunogeni i skoro hemijski potpuno inertni. Kod 12 odraslih mužjaka Wistar pacova implantirani su subkutano implanti aTCP, DC i HAP (disk 5x2 mm). Na kraju 2. i 12. nedelje nakon implantacije, životinje su žrtvovane i reakcija tkivoimplant je analizirana histološki. Analiza rutinski obojenih (5 μm, hemotoksilin & eozin) isečaka tkiva kutisa i subkutisa koje se nalazilo oko implantiranog aTCP, DC i HAP, otkrila je sledeće: 1) svi keramički implanti bili su okruženi fibroznom kapsulom; 2) u odnosu na vreme posle implantacije, postojale su značajne razlike u tkivo-implant reakciji, dok u odnosu na vrstu keramičkog materijala, nisu postojale razlike u reakciji tkiva na implant; 3) za sve tri vrste implantirane kalcijum-fosfatne keramike, glavni nalaz u tkivu bio je, dve nedelje nakon implantacije, hiperemija i ćelijska infiltracija, dok nakon 12 nedelja prisutna intenzivna angiogeneza i stvaranje kolagenih vlakana.
PB  - Univerzitet u Beogradu - Fakultet veterinarske medicine, Beograd
T2  - Acta Veterinaria, Beograd
T1  - A tissue-implant reaction associated with subcutan implantation of alpha-tricalcium phosphate, dental ceramic and hydroxyapatite bioceramics in rats
T1  - Tkivo-implant reakcija povezana sa subkutanom implantacijom alfa-trikalcijum fosfata, dentalne keramike i hidroksiapatit biokeramike kod pacova
EP  - 393
IS  - 4
SP  - 381
VL  - 58
DO  - 10.2298/AVB0804381S
ER  - 

@article{
author = "Stojanović, D. and Janaćković, Đorđe and Marković, Danica and Tasić, Goran and Aleksandrić, B. and Kojić, Zvezdana",
year = "2008",
abstract = "Calcium phosphate ceramics are among the more commonly used and biocompatible ceramics. Recently, we have synthesized a new calcium phosphate ceramic, alpha tricalcium phosphate (aTCP). The aim of this study was to assess the biocompatibility of this original, in our laboratory modified, newly synthesized aTCP ceramic, by carefully evaluating the inflammatory reaction of soft tissue in response to its subcutaneous implantation, and by comparing this result with the results of already widely used virtually non-toxic, non-immunogenic, and almost chemically inert dental (DC) and hydroxy apatite (HAP) ceramics. Implants (diameter 5x2 mm) of aTCP, DC and HAP were implanted into 12 adult male rats subcutaneously. At 2 weeks and 12 weeks post-implantation, the animals were euthanized and the tissueimplant reactions were analyzed histologically. Evaluation of routine stained sections (5 μm, hematoxylin & eosin) of the cutis and subcutis surrounding the aTCP, DC and HAP ceramics revealed the following: 1) all the ceramic devices had fibrous connective tissue capsules; 2) there were significant differences in the tissue - implant reactions based on the estimated time, while there were no differences in the tissue-implant reaction based on the type of ceramic material; 3) two weeks after implantation hyperemia and cellular proliferation were the most expressive results, while twelve weeks after implantation extensive angiogenesis and collagen fibers production were the prominent findings for all types of implanted calcium phosphate ceramics., Podaci iz literature ukazuju da se kalcijum fosfatna keramika ubraja među najčešće korišćene i biološki najkompatibilnije keramičke materijale koji se danas primenjuju u medicini. U našoj laboratoriji sintetisana je nova vrsta kalcijum fosfatne keramike, alfa-trikalcijum fosfat (aTCP). Cilj ovog rada je bio da se proceni biokompatibilnost ovog, modifikovanog, novosintetisanog aTCP, putem pažljive procene inflamatorne reakcije mekog tkiva koja nastaje kao odgovor na njegovu subkutanu implantaciju i putem upoređivanja ovih rezultata sa rezultatima subku- tane implantacije dentalne keramike (DC) i hidroksiapatita (HAP), koji su ne-toksični, ne-imunogeni i skoro hemijski potpuno inertni. Kod 12 odraslih mužjaka Wistar pacova implantirani su subkutano implanti aTCP, DC i HAP (disk 5x2 mm). Na kraju 2. i 12. nedelje nakon implantacije, životinje su žrtvovane i reakcija tkivoimplant je analizirana histološki. Analiza rutinski obojenih (5 μm, hemotoksilin & eozin) isečaka tkiva kutisa i subkutisa koje se nalazilo oko implantiranog aTCP, DC i HAP, otkrila je sledeće: 1) svi keramički implanti bili su okruženi fibroznom kapsulom; 2) u odnosu na vreme posle implantacije, postojale su značajne razlike u tkivo-implant reakciji, dok u odnosu na vrstu keramičkog materijala, nisu postojale razlike u reakciji tkiva na implant; 3) za sve tri vrste implantirane kalcijum-fosfatne keramike, glavni nalaz u tkivu bio je, dve nedelje nakon implantacije, hiperemija i ćelijska infiltracija, dok nakon 12 nedelja prisutna intenzivna angiogeneza i stvaranje kolagenih vlakana.",
publisher = "Univerzitet u Beogradu - Fakultet veterinarske medicine, Beograd",
journal = "Acta Veterinaria, Beograd",
title = "A tissue-implant reaction associated with subcutan implantation of alpha-tricalcium phosphate, dental ceramic and hydroxyapatite bioceramics in rats, Tkivo-implant reakcija povezana sa subkutanom implantacijom alfa-trikalcijum fosfata, dentalne keramike i hidroksiapatit biokeramike kod pacova",
pages = "393-381",
number = "4",
volume = "58",
doi = "10.2298/AVB0804381S"
}

Stojanović, D., Janaćković, Đ., Marković, D., Tasić, G., Aleksandrić, B.,& Kojić, Z.. (2008). A tissue-implant reaction associated with subcutan implantation of alpha-tricalcium phosphate, dental ceramic and hydroxyapatite bioceramics in rats. in Acta Veterinaria, Beograd
Univerzitet u Beogradu - Fakultet veterinarske medicine, Beograd., 58(4), 381-393.
https://doi.org/10.2298/AVB0804381S

Stojanović D, Janaćković Đ, Marković D, Tasić G, Aleksandrić B, Kojić Z. A tissue-implant reaction associated with subcutan implantation of alpha-tricalcium phosphate, dental ceramic and hydroxyapatite bioceramics in rats. in Acta Veterinaria, Beograd. 2008;58(4):381-393.
doi:10.2298/AVB0804381S .

Stojanović, D., Janaćković, Đorđe, Marković, Danica, Tasić, Goran, Aleksandrić, B., Kojić, Zvezdana, "A tissue-implant reaction associated with subcutan implantation of alpha-tricalcium phosphate, dental ceramic and hydroxyapatite bioceramics in rats" in Acta Veterinaria, Beograd, 58, no. 4 (2008):381-393,
https://doi.org/10.2298/AVB0804381S . .

TY  - JOUR
AU  - Stojanović, D.
AU  - Jokić, Bojan
AU  - Veljović, Đorđe
AU  - Petrović, R.
AU  - Uskoković, Petar
AU  - Janaćković, Đorđe
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1120
AB  - Titanium and titanium alloys are widely used as materials for implants, because of their mechanical properties and nontoxic behaviour, but unfortunately, are bioinert. In order to solve this problem, the metal implant could be coated with bioactive materials with good adhesion to metal and could be also bonded interfacially to the bone. The aim of this work is to investigate the synthesis of functionally graded glass-apatite coating on Ti6A14V alloys by the electrophoretic method. In order to enhance bioactivity of the surface, nanostructured hydroxyapatite particles were embedded in the glass coating. The influence of synthesis condition such as deposition voltage and time on the coating properties and deposit weights were examined. It was shown that controlling the deposition voltage and time, the deposition weight and thickness of coating could be controlled. It was shown that electrophoretic deposition can be successfully employed for the preparation graded glass-apatite coating on Ti6A14V substrate.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition
EP  - 1599
IS  - 2-3
SP  - 1595
VL  - 27
DO  - 10.1016/j.jeurceramsoc.2006.04.111
ER  - 

@article{
author = "Stojanović, D. and Jokić, Bojan and Veljović, Đorđe and Petrović, R. and Uskoković, Petar and Janaćković, Đorđe",
year = "2007",
abstract = "Titanium and titanium alloys are widely used as materials for implants, because of their mechanical properties and nontoxic behaviour, but unfortunately, are bioinert. In order to solve this problem, the metal implant could be coated with bioactive materials with good adhesion to metal and could be also bonded interfacially to the bone. The aim of this work is to investigate the synthesis of functionally graded glass-apatite coating on Ti6A14V alloys by the electrophoretic method. In order to enhance bioactivity of the surface, nanostructured hydroxyapatite particles were embedded in the glass coating. The influence of synthesis condition such as deposition voltage and time on the coating properties and deposit weights were examined. It was shown that controlling the deposition voltage and time, the deposition weight and thickness of coating could be controlled. It was shown that electrophoretic deposition can be successfully employed for the preparation graded glass-apatite coating on Ti6A14V substrate.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition",
pages = "1599-1595",
number = "2-3",
volume = "27",
doi = "10.1016/j.jeurceramsoc.2006.04.111"
}

Stojanović, D., Jokić, B., Veljović, Đ., Petrović, R., Uskoković, P.,& Janaćković, Đ.. (2007). Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 27(2-3), 1595-1599.
https://doi.org/10.1016/j.jeurceramsoc.2006.04.111

Stojanović D, Jokić B, Veljović Đ, Petrović R, Uskoković P, Janaćković Đ. Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition. in Journal of the European Ceramic Society. 2007;27(2-3):1595-1599.
doi:10.1016/j.jeurceramsoc.2006.04.111 .

Stojanović, D., Jokić, Bojan, Veljović, Đorđe, Petrović, R., Uskoković, Petar, Janaćković, Đorđe, "Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition" in Journal of the European Ceramic Society, 27, no. 2-3 (2007):1595-1599,
https://doi.org/10.1016/j.jeurceramsoc.2006.04.111 . .