Elezović, Nevenka

Link to this page

Authority KeyName Variants
a8c228ed-c70d-4c75-b6c0-7cd9a44def7b
  • Elezović, Nevenka (2)
Projects

Author's Bibliography

Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range

Nikolić, Nebojša D.; Živković, Predrag M.; Elezović, Nevenka; Lačnjevac, Uroš

(Springer-Verlag, 2020)

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Živković, Predrag M.
AU  - Elezović, Nevenka
AU  - Lačnjevac, Uroš
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5890
AB  - Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has beeninvestigated. Morphological and structural characteristics of this electrode type obtained by various parameters of RC regimeswere examined by the techniques of scanning electron and optical microscopies, while the amount of hydrogen produced duringelectrodeposition process was quantified by determination of the average current efficiency for hydrogen evolution reaction. Tooptimize the process of formation of the honeycomb-like electrodes, the following parameters of square wave RC regimes wereanalyzed: the cathodic current density, the same anodic to cathodic time ratios but various durations of the cathodic and theanodic pulses, and the various values of the anodic to cathodic time ratios. The minimal amount of hydrogen spent for formationof the honeycomb-like electrodes with maximal number of holes formed from detached hydrogen bubbles is obtained with theanodic to cathodic time ratio of 0.50 and duration of the cathodic and anodic pulses of 2 and 1 s, respectively. To explainformation of the honeycomb-like electrodes of optimal morphological and structural characteristics, the upgraded mathematicalmodel defining the RC regime in the second range was proposed and discussed.
PB  - Springer-Verlag
T2  - Journal of Solid State Electrochemistry
T1  - Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
EP  - 1624
IS  - 7
SP  - 1615
VL  - 24
DO  - 10.1007/s10008-020-04658-3
ER  - 
@article{
author = "Nikolić, Nebojša D. and Živković, Predrag M. and Elezović, Nevenka and Lačnjevac, Uroš",
year = "2020",
abstract = "Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has beeninvestigated. Morphological and structural characteristics of this electrode type obtained by various parameters of RC regimeswere examined by the techniques of scanning electron and optical microscopies, while the amount of hydrogen produced duringelectrodeposition process was quantified by determination of the average current efficiency for hydrogen evolution reaction. Tooptimize the process of formation of the honeycomb-like electrodes, the following parameters of square wave RC regimes wereanalyzed: the cathodic current density, the same anodic to cathodic time ratios but various durations of the cathodic and theanodic pulses, and the various values of the anodic to cathodic time ratios. The minimal amount of hydrogen spent for formationof the honeycomb-like electrodes with maximal number of holes formed from detached hydrogen bubbles is obtained with theanodic to cathodic time ratio of 0.50 and duration of the cathodic and anodic pulses of 2 and 1 s, respectively. To explainformation of the honeycomb-like electrodes of optimal morphological and structural characteristics, the upgraded mathematicalmodel defining the RC regime in the second range was proposed and discussed.",
publisher = "Springer-Verlag",
journal = "Journal of Solid State Electrochemistry",
title = "Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range",
pages = "1624-1615",
number = "7",
volume = "24",
doi = "10.1007/s10008-020-04658-3"
}
Nikolić, N. D., Živković, P. M., Elezović, N.,& Lačnjevac, U.. (2020). Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range. in Journal of Solid State Electrochemistry
Springer-Verlag., 24(7), 1615-1624.
https://doi.org/10.1007/s10008-020-04658-3
Nikolić ND, Živković PM, Elezović N, Lačnjevac U. Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range. in Journal of Solid State Electrochemistry. 2020;24(7):1615-1624.
doi:10.1007/s10008-020-04658-3 .
Nikolić, Nebojša D., Živković, Predrag M., Elezović, Nevenka, Lačnjevac, Uroš, "Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range" in Journal of Solid State Electrochemistry, 24, no. 7 (2020):1615-1624,
https://doi.org/10.1007/s10008-020-04658-3 . .
4
2
4

Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions

Elezović, Nevenka; Radmilović, Velimir R.; Kovač, Janez; Babić, Biljana M.; Gajić Krstajić, Ljiljana; Krstajić, Nedeljko

(Royal Society of Chemistry, 2015)

TY  - JOUR
AU  - Elezović, Nevenka
AU  - Radmilović, Velimir R.
AU  - Kovač, Janez
AU  - Babić, Biljana M.
AU  - Gajić Krstajić, Ljiljana
AU  - Krstajić, Nedeljko
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5795
AB  - A platinum nanocatalyst on Sb doped tin oxide support (Sb-SnO2) was synthesized and characterized as a catalyst for oxygen reduction reaction in 0.1 mol dm(-3) NaOH solution at 25 degrees C. Sb (5%) doped tin oxide support was synthesized by a modified hydrazine reduction procedure. The platinum nanocatalyst (20% Pt) on Sb-SnO2 support was synthesized by a borohydride reduction method. The synthesized support and catalyst were characterized by high resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) and X-ray diffraction technique (XRD). X-ray photoelectron spectroscopy was applied to characterize the chemical status of elements before and after Pt-treatment. XPS spectra of Sn 3d, Pt 4f, Sb 3d and O 1s revealed that the Pt-deposition on Sb-SnO2 support induced the reduction of the Sn(4+) oxidation state to Sn(2+) and Sn(0) states, while Pt remained in the metallic state and Sb was in the (3+) oxidation state. Homogenous Pt nanoparticle distribution over the support, without pronounced particle agglomeration, was confirmed by HRTEM technique. The average Pt particle size was 2.9 nm. The electrochemically active Pt surface area of the catalyst was determined by the integration of the cyclic voltammetry curve in the potential region of underpotential deposition of hydrogen, after double layer charge correction, taking into account the reference value of 210 mu C cm(-2) for full monolayer coverage. This calculation gave the value of 51 m(2) g(-1). The kinetics of the oxygen reduction reaction with Pt/[Sb-SnO2 catalyst was studied by cyclic voltammetry and linear sweep voltammetry using a rotating gold disc electrode. Two different Tafel slopes were observed: one close to 60 mV dec(-1) in the low current density region, and another at similar to 120 mV dec(-1) in the higher current densities region, as was already referred in previous reports for the oxygen reduction reaction with polycrystalline Pt, as well as with different Pt based nanocatalysts. The specific activities for oxygen reduction, expressed in terms of kinetic current densities per electrochemically Pt active surface area, as well as per mass of Pt loaded, at the constant potential of practical interest (0.85 V and 0.90 V vs. RHE), were compared to a carbon supported (Vulcan XC-72) catalyst. The Pt/[Sb-SnO2 catalyst exhibited similar catalytic activity for oxygen reduction reaction like carbon supported one. The advantages of the carbon free support application in terms of the durability and stability of the catalysts were proved by accelerated stability tests.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions
EP  - 15929
IS  - 21
SP  - 15923
VL  - 5
DO  - 10.1039/c4ra13391a
UR  - https://hdl.handle.net/21.15107/rcub_dais_3354
ER  - 
@article{
author = "Elezović, Nevenka and Radmilović, Velimir R. and Kovač, Janez and Babić, Biljana M. and Gajić Krstajić, Ljiljana and Krstajić, Nedeljko",
year = "2015",
abstract = "A platinum nanocatalyst on Sb doped tin oxide support (Sb-SnO2) was synthesized and characterized as a catalyst for oxygen reduction reaction in 0.1 mol dm(-3) NaOH solution at 25 degrees C. Sb (5%) doped tin oxide support was synthesized by a modified hydrazine reduction procedure. The platinum nanocatalyst (20% Pt) on Sb-SnO2 support was synthesized by a borohydride reduction method. The synthesized support and catalyst were characterized by high resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) and X-ray diffraction technique (XRD). X-ray photoelectron spectroscopy was applied to characterize the chemical status of elements before and after Pt-treatment. XPS spectra of Sn 3d, Pt 4f, Sb 3d and O 1s revealed that the Pt-deposition on Sb-SnO2 support induced the reduction of the Sn(4+) oxidation state to Sn(2+) and Sn(0) states, while Pt remained in the metallic state and Sb was in the (3+) oxidation state. Homogenous Pt nanoparticle distribution over the support, without pronounced particle agglomeration, was confirmed by HRTEM technique. The average Pt particle size was 2.9 nm. The electrochemically active Pt surface area of the catalyst was determined by the integration of the cyclic voltammetry curve in the potential region of underpotential deposition of hydrogen, after double layer charge correction, taking into account the reference value of 210 mu C cm(-2) for full monolayer coverage. This calculation gave the value of 51 m(2) g(-1). The kinetics of the oxygen reduction reaction with Pt/[Sb-SnO2 catalyst was studied by cyclic voltammetry and linear sweep voltammetry using a rotating gold disc electrode. Two different Tafel slopes were observed: one close to 60 mV dec(-1) in the low current density region, and another at similar to 120 mV dec(-1) in the higher current densities region, as was already referred in previous reports for the oxygen reduction reaction with polycrystalline Pt, as well as with different Pt based nanocatalysts. The specific activities for oxygen reduction, expressed in terms of kinetic current densities per electrochemically Pt active surface area, as well as per mass of Pt loaded, at the constant potential of practical interest (0.85 V and 0.90 V vs. RHE), were compared to a carbon supported (Vulcan XC-72) catalyst. The Pt/[Sb-SnO2 catalyst exhibited similar catalytic activity for oxygen reduction reaction like carbon supported one. The advantages of the carbon free support application in terms of the durability and stability of the catalysts were proved by accelerated stability tests.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions",
pages = "15929-15923",
number = "21",
volume = "5",
doi = "10.1039/c4ra13391a",
url = "https://hdl.handle.net/21.15107/rcub_dais_3354"
}
Elezović, N., Radmilović, V. R., Kovač, J., Babić, B. M., Gajić Krstajić, L.,& Krstajić, N.. (2015). Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions. in RSC Advances
Royal Society of Chemistry., 5(21), 15923-15929.
https://doi.org/10.1039/c4ra13391a
https://hdl.handle.net/21.15107/rcub_dais_3354
Elezović N, Radmilović VR, Kovač J, Babić BM, Gajić Krstajić L, Krstajić N. Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions. in RSC Advances. 2015;5(21):15923-15929.
doi:10.1039/c4ra13391a
https://hdl.handle.net/21.15107/rcub_dais_3354 .
Elezović, Nevenka, Radmilović, Velimir R., Kovač, Janez, Babić, Biljana M., Gajić Krstajić, Ljiljana, Krstajić, Nedeljko, "Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions" in RSC Advances, 5, no. 21 (2015):15923-15929,
https://doi.org/10.1039/c4ra13391a .,
https://hdl.handle.net/21.15107/rcub_dais_3354 .
1
23
21
23