TY  - JOUR
AU  - Bučko, Mihael
AU  - Tomić, Milorad V.
AU  - Stojanović, M.V.
AU  - Pavlović, Miomir
AU  - Bajat, Jelena
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1537
AB  - The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating baths at different current densities. The influence of deposition current density on the appearance of alloy coatings, as well as their corrosion stability, was examined. It was shown that Zn-Mn alloys with the best corrosion properties, among all investigated in this work, were obtained from chloride plating bath at 2 A dm-2. .
AB  - Izučavan je uticaj vrste rastvora za taloženje na iskorišćenje struje prilikom elektrohemijskog taloženja Zn-Mn legura. Legure su taložene na čeliku iz hloridnog, sulfatnog i pirofosfatnog rastvora različitim gustinama struje. Ispitivan je uticaj gustine struje taloženja na izgled prevlaka legura, kao i njihovu korozionu stabilnost. Pokazano je da najveću korozionu stabilnost imaju legure dobijene taloženjem iz hloridnog rastvora gustinom struje od 2 A dm-2.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings
T1  - Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
EP  - 110
IS  - 2
SP  - 105
VL  - 51
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1537
ER  - 

@article{
author = "Bučko, Mihael and Tomić, Milorad V. and Stojanović, M.V. and Pavlović, Miomir and Bajat, Jelena",
year = "2010",
abstract = "The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating baths at different current densities. The influence of deposition current density on the appearance of alloy coatings, as well as their corrosion stability, was examined. It was shown that Zn-Mn alloys with the best corrosion properties, among all investigated in this work, were obtained from chloride plating bath at 2 A dm-2. ., Izučavan je uticaj vrste rastvora za taloženje na iskorišćenje struje prilikom elektrohemijskog taloženja Zn-Mn legura. Legure su taložene na čeliku iz hloridnog, sulfatnog i pirofosfatnog rastvora različitim gustinama struje. Ispitivan je uticaj gustine struje taloženja na izgled prevlaka legura, kao i njihovu korozionu stabilnost. Pokazano je da najveću korozionu stabilnost imaju legure dobijene taloženjem iz hloridnog rastvora gustinom struje od 2 A dm-2.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings, Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura",
pages = "110-105",
number = "2",
volume = "51",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1537"
}

Bučko, M., Tomić, M. V., Stojanović, M.V., Pavlović, M.,& Bajat, J.. (2010). The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 51(2), 105-110.
https://hdl.handle.net/21.15107/rcub_technorep_1537

Bučko M, Tomić MV, Stojanović M, Pavlović M, Bajat J. The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings. in Zaštita materijala. 2010;51(2):105-110.
https://hdl.handle.net/21.15107/rcub_technorep_1537 .

Bučko, Mihael, Tomić, Milorad V., Stojanović, M.V., Pavlović, Miomir, Bajat, Jelena, "The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings" in Zaštita materijala, 51, no. 2 (2010):105-110,
https://hdl.handle.net/21.15107/rcub_technorep_1537 .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Pavlovic, Lj. J.
AU  - Krstic, S. B.
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5557
AB  - The relative concentration of hydrogen ion (H(+)) as a function of sulfuric acid (H(2)SO(4)) concentration (calculated using Pitzer's model) and the electrochemical processes by which irregular copper deposits are formed were correlated. Irregular deposits are formed by potentiostatic electrodeposition at a high overpotential where the hydrogen evolution reaction occurs parallel to copper electrodeposition. Two sets of acid sulfate solutions were analyzed. In one set of experiments, the concentration of CuSO(4) was constant while the concentration of H(2)SO(4) was varied. The other set of experiments was performed with a constant concentration of H(2)SO(4) and different concentrations of CuSO(4). Then, the volumes of the evolved hydrogen (calculated as the average current efficiencies of hydrogen evolution) and the morphologies of copper deposits, characterized by the SEM technique, obtained for the same ratio of CuSO(4)/H(2)SO(4) were mutually compared and discussed in terms of the relative concentrations of hydrogen ions (H(+)) as a function of the H(2)SO(4) concentration. Good agreement between the ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system and the results of the electrochemical processes was obtained. In this way, it was shown how this ionic equilibrium can be applied to predict and analyze the solution composition in electrolytic copper deposition processes.
PB  - Oxford : Pergamon-Elsevier Science Ltd
T2  - Chemical Engineering Science
T1  - Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper
EP  - 2828
IS  - 10
SP  - 2824
VL  - 63
DO  - 10.1016/j.ces.2008.02.022
ER  - 

@article{
author = "Nikolić, Nebojša D. and Pavlovic, Lj. J. and Krstic, S. B. and Pavlović, Miomir and Popov, Konstantin I.",
year = "2008",
abstract = "The relative concentration of hydrogen ion (H(+)) as a function of sulfuric acid (H(2)SO(4)) concentration (calculated using Pitzer's model) and the electrochemical processes by which irregular copper deposits are formed were correlated. Irregular deposits are formed by potentiostatic electrodeposition at a high overpotential where the hydrogen evolution reaction occurs parallel to copper electrodeposition. Two sets of acid sulfate solutions were analyzed. In one set of experiments, the concentration of CuSO(4) was constant while the concentration of H(2)SO(4) was varied. The other set of experiments was performed with a constant concentration of H(2)SO(4) and different concentrations of CuSO(4). Then, the volumes of the evolved hydrogen (calculated as the average current efficiencies of hydrogen evolution) and the morphologies of copper deposits, characterized by the SEM technique, obtained for the same ratio of CuSO(4)/H(2)SO(4) were mutually compared and discussed in terms of the relative concentrations of hydrogen ions (H(+)) as a function of the H(2)SO(4) concentration. Good agreement between the ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system and the results of the electrochemical processes was obtained. In this way, it was shown how this ionic equilibrium can be applied to predict and analyze the solution composition in electrolytic copper deposition processes.",
publisher = "Oxford : Pergamon-Elsevier Science Ltd",
journal = "Chemical Engineering Science",
title = "Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper",
pages = "2828-2824",
number = "10",
volume = "63",
doi = "10.1016/j.ces.2008.02.022"
}

Nikolić, N. D., Pavlovic, Lj. J., Krstic, S. B., Pavlović, M.,& Popov, K. I.. (2008). Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper. in Chemical Engineering Science
Oxford : Pergamon-Elsevier Science Ltd., 63(10), 2824-2828.
https://doi.org/10.1016/j.ces.2008.02.022

Nikolić ND, Pavlovic LJ, Krstic SB, Pavlović M, Popov KI. Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper. in Chemical Engineering Science. 2008;63(10):2824-2828.
doi:10.1016/j.ces.2008.02.022 .

Nikolić, Nebojša D., Pavlovic, Lj. J., Krstic, S. B., Pavlović, Miomir, Popov, Konstantin I., "Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper" in Chemical Engineering Science, 63, no. 10 (2008):2824-2828,
https://doi.org/10.1016/j.ces.2008.02.022 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Pavlović, Lj.J.
AU  - Pavlović, Miomir
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5494
AB  - In this paper, the phenomenology of a formation of a honeycomb-like structure was considered. Copper deposits obtained at overpotential of 1000 mV were examined by scanning electron microscopy (SEM) technique. It was shown that two groups of craters or holes were formed by the electrodeposition at this overpotential. The origin of one group is associated with hydrogen evolution and the attachment of hydrogen bubbles at the surface area of an electrode. For the origin of the other group, a current distribution at the growing surface was very important. The effect of preparing a working electrode onto the formation of a honeycomb-like structure is also considered.
T2  - Journal of Solid State Electrochemistry
T1  - Phenomenology of a formation of a honeycomb-like structure during copper electrodeposition
EP  - 675
IS  - 5
SP  - 667
VL  - 11
DO  - 10.1007/s10008-006-0222-z
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlović, Lj.J. and Pavlović, Miomir",
year = "2007",
abstract = "In this paper, the phenomenology of a formation of a honeycomb-like structure was considered. Copper deposits obtained at overpotential of 1000 mV were examined by scanning electron microscopy (SEM) technique. It was shown that two groups of craters or holes were formed by the electrodeposition at this overpotential. The origin of one group is associated with hydrogen evolution and the attachment of hydrogen bubbles at the surface area of an electrode. For the origin of the other group, a current distribution at the growing surface was very important. The effect of preparing a working electrode onto the formation of a honeycomb-like structure is also considered.",
journal = "Journal of Solid State Electrochemistry",
title = "Phenomenology of a formation of a honeycomb-like structure during copper electrodeposition",
pages = "675-667",
number = "5",
volume = "11",
doi = "10.1007/s10008-006-0222-z"
}

Nikolić, N. D., Popov, K. I., Pavlović, Lj.J.,& Pavlović, M.. (2007). Phenomenology of a formation of a honeycomb-like structure during copper electrodeposition. in Journal of Solid State Electrochemistry, 11(5), 667-675.
https://doi.org/10.1007/s10008-006-0222-z

Nikolić ND, Popov KI, Pavlović L, Pavlović M. Phenomenology of a formation of a honeycomb-like structure during copper electrodeposition. in Journal of Solid State Electrochemistry. 2007;11(5):667-675.
doi:10.1007/s10008-006-0222-z .

Nikolić, Nebojša D., Popov, Konstantin I., Pavlović, Lj.J., Pavlović, Miomir, "Phenomenology of a formation of a honeycomb-like structure during copper electrodeposition" in Journal of Solid State Electrochemistry, 11, no. 5 (2007):667-675,
https://doi.org/10.1007/s10008-006-0222-z . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5486
AB  - The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency of hydrogen evolution and by scanning electron microscopic (SEM) analysis of the morphology of the formed copper deposits. Increasing the temperature of the solution led to a shift of both the beginning and the end of the plateau of the limiting diffusion current density towards lower electrodeposition overpotentials. Also, higher temperatures led to the formation of morphological forms of copper deposits characteristic for electrodeposition of copper at some higher overpotentials. The unexpected trend in the development of copper structures electrodeposited at an overpotential of 800 mV is discussed in terms of the effect of temperature on the viscosity and surface tension of the electroplating solution.
AB  - Uticaj temperature na elektrohemijsko taloženje bakra na prenapetostima koje pripadaju platoima granične difuzione gustine struje, kao i na višim prenapetostima je ispitan određivanjem srednjeg iskorišćenja struje reakcije izdvajanja vodonika i analizom morfologija taloga bakra tehnikom skenirajuće elektronske mikroskopije. Povećanje temperature rastvora dovelo je do pomeranja i početka i kraja platoa granične difuzione gustine struje ka nižim prenapetostima. Takođe, povećanje temperature dovelo je do formiranja morfoloških formi taloga bakra karakterističnih za elektrohemijsko taloženje na nekim višim prenapetostima. Neočekivani trend u razvoju struktura bakra dobijenih na prenapetosti od 800 mV je bio diskutovan na osnovu uticaja temperature na viskoznost i površinski napon rastvora za elektrohemijsko taloženje bakra.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Effect of temperature on the electrodeposition of disperse copper deposits
T1  - Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
EP  - 1381
IS  - 12
SP  - 1369
VL  - 72
DO  - 10.2298/JSC0712369N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Pavlović, Ljubica and Pavlović, Miomir and Popov, Konstantin I.",
year = "2007",
abstract = "The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency of hydrogen evolution and by scanning electron microscopic (SEM) analysis of the morphology of the formed copper deposits. Increasing the temperature of the solution led to a shift of both the beginning and the end of the plateau of the limiting diffusion current density towards lower electrodeposition overpotentials. Also, higher temperatures led to the formation of morphological forms of copper deposits characteristic for electrodeposition of copper at some higher overpotentials. The unexpected trend in the development of copper structures electrodeposited at an overpotential of 800 mV is discussed in terms of the effect of temperature on the viscosity and surface tension of the electroplating solution., Uticaj temperature na elektrohemijsko taloženje bakra na prenapetostima koje pripadaju platoima granične difuzione gustine struje, kao i na višim prenapetostima je ispitan određivanjem srednjeg iskorišćenja struje reakcije izdvajanja vodonika i analizom morfologija taloga bakra tehnikom skenirajuće elektronske mikroskopije. Povećanje temperature rastvora dovelo je do pomeranja i početka i kraja platoa granične difuzione gustine struje ka nižim prenapetostima. Takođe, povećanje temperature dovelo je do formiranja morfoloških formi taloga bakra karakterističnih za elektrohemijsko taloženje na nekim višim prenapetostima. Neočekivani trend u razvoju struktura bakra dobijenih na prenapetosti od 800 mV je bio diskutovan na osnovu uticaja temperature na viskoznost i površinski napon rastvora za elektrohemijsko taloženje bakra.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Effect of temperature on the electrodeposition of disperse copper deposits, Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra",
pages = "1381-1369",
number = "12",
volume = "72",
doi = "10.2298/JSC0712369N"
}

Nikolić, N. D., Pavlović, L., Pavlović, M.,& Popov, K. I.. (2007). Effect of temperature on the electrodeposition of disperse copper deposits. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 72(12), 1369-1381.
https://doi.org/10.2298/JSC0712369N

Nikolić ND, Pavlović L, Pavlović M, Popov KI. Effect of temperature on the electrodeposition of disperse copper deposits. in Journal of the Serbian Chemical Society. 2007;72(12):1369-1381.
doi:10.2298/JSC0712369N .

Nikolić, Nebojša D., Pavlović, Ljubica, Pavlović, Miomir, Popov, Konstantin I., "Effect of temperature on the electrodeposition of disperse copper deposits" in Journal of the Serbian Chemical Society, 72, no. 12 (2007):1369-1381,
https://doi.org/10.2298/JSC0712369N . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Pavlovic, Ljubica.J.
AU  - Pavlović, Miomir
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5485
AB  - Electrodeposition of copper from acid sulfate solutions at overpotentials on the plateau of the limiting diffusion current density and at higher overpotentials was examined. The average current efficiencies for hydrogen evolution reaction are determined by a measurement of the quantity of evolved hydrogen and the overall electrodeposition current as a function of electrodeposition time, while morphologies of copper deposits are examined by the use of the scanning electron microscopy (SEM) technique. It is found that the open and porous structures of copper deposits (denoted and as honeycomb - like copper structures), suitable for electrodes in electrochemical devices such as fuel cells and chemical sensors, were reached by electrodeposition processes from solutions with the lower concentrations of Cu (II) ions (0.15 M CuSO 4 and less in 0.50 M H2SO4) at overpotentials outside the plateau of the limiting diffusion current density at which the quantity of evolved hydrogen was enough to change hydrodynamic conditions in the near - electrode layer. The main characteristics of these copper structures were craters or holes formed primarily due to the attachment hydrogen bubbles with agglomerates of copper grains between them.
PB  - MDPI
T2  - Sensors
T1  - Determination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devices
EP  - 15
IS  - 1
SP  - 1
VL  - 7
DO  - 10.3390/s7010001
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlovic, Ljubica.J. and Pavlović, Miomir",
year = "2007",
abstract = "Electrodeposition of copper from acid sulfate solutions at overpotentials on the plateau of the limiting diffusion current density and at higher overpotentials was examined. The average current efficiencies for hydrogen evolution reaction are determined by a measurement of the quantity of evolved hydrogen and the overall electrodeposition current as a function of electrodeposition time, while morphologies of copper deposits are examined by the use of the scanning electron microscopy (SEM) technique. It is found that the open and porous structures of copper deposits (denoted and as honeycomb - like copper structures), suitable for electrodes in electrochemical devices such as fuel cells and chemical sensors, were reached by electrodeposition processes from solutions with the lower concentrations of Cu (II) ions (0.15 M CuSO 4 and less in 0.50 M H2SO4) at overpotentials outside the plateau of the limiting diffusion current density at which the quantity of evolved hydrogen was enough to change hydrodynamic conditions in the near - electrode layer. The main characteristics of these copper structures were craters or holes formed primarily due to the attachment hydrogen bubbles with agglomerates of copper grains between them.",
publisher = "MDPI",
journal = "Sensors",
title = "Determination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devices",
pages = "15-1",
number = "1",
volume = "7",
doi = "10.3390/s7010001"
}

Nikolić, N. D., Popov, K. I., Pavlovic, Ljubica.J.,& Pavlović, M.. (2007). Determination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devices. in Sensors
MDPI., 7(1), 1-15.
https://doi.org/10.3390/s7010001

Nikolić ND, Popov KI, Pavlovic L, Pavlović M. Determination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devices. in Sensors. 2007;7(1):1-15.
doi:10.3390/s7010001 .

Nikolić, Nebojša D., Popov, Konstantin I., Pavlovic, Ljubica.J., Pavlović, Miomir, "Determination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devices" in Sensors, 7, no. 1 (2007):1-15,
https://doi.org/10.3390/s7010001 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Pavlovic, LJ
AU  - Pavlović, Miomir
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5460
AB  - The effect of hydrogen codeposition on the morphology of copper electrodeposits was studied. The dependences of the overall current and the volume of evolved hydrogen on the quantity of electricity used were plotted and the average current efficiencies of the evolved hydrogen were derived from them. The morphologies of copper electrodeposits were correlated with the hydrogen evolution rates. It was shown that dendrites are the main characteristic of deposits obtained at overpotentials belonging to the limiting diffusion current density plateau, at which the hydrogen evolution rate is low. At larger overpotentials the dominant form become craters in the honeycomb-like electrodeposits due to the intensive hydrogen codeposition.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential
EP  - 98
IS  - 1
SP  - 88
VL  - 588
DO  - 10.1016/j.jelechem.2005.12.006
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlovic, LJ and Pavlović, Miomir",
year = "2006",
abstract = "The effect of hydrogen codeposition on the morphology of copper electrodeposits was studied. The dependences of the overall current and the volume of evolved hydrogen on the quantity of electricity used were plotted and the average current efficiencies of the evolved hydrogen were derived from them. The morphologies of copper electrodeposits were correlated with the hydrogen evolution rates. It was shown that dendrites are the main characteristic of deposits obtained at overpotentials belonging to the limiting diffusion current density plateau, at which the hydrogen evolution rate is low. At larger overpotentials the dominant form become craters in the honeycomb-like electrodeposits due to the intensive hydrogen codeposition.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential",
pages = "98-88",
number = "1",
volume = "588",
doi = "10.1016/j.jelechem.2005.12.006"
}

Nikolić, N. D., Popov, K. I., Pavlovic, L.,& Pavlović, M.. (2006). The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential. in Journal of Electroanalytical Chemistry
Elsevier., 588(1), 88-98.
https://doi.org/10.1016/j.jelechem.2005.12.006

Nikolić ND, Popov KI, Pavlovic L, Pavlović M. The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential. in Journal of Electroanalytical Chemistry. 2006;588(1):88-98.
doi:10.1016/j.jelechem.2005.12.006 .

Nikolić, Nebojša D., Popov, Konstantin I., Pavlovic, LJ, Pavlović, Miomir, "The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential" in Journal of Electroanalytical Chemistry, 588, no. 1 (2006):88-98,
https://doi.org/10.1016/j.jelechem.2005.12.006 . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5449
AB  - A method for the estimation of the size of the representative particle of a copper powder is given. Cross sections of representative particles of flowing and non-flowing powders estimated by this procedure are also presented.
AB  - U radu je dat metod za procenu veličine reprezentativnih čestica bakarnog praha. Predstavljeni su poprečni preseci reprezentativne čestice tečljivog i netečljivog praha dobijeni korišćenjem ovog postupka.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Physical modeling of representative particles of electrodeposited copper powders
T1  - Fizičko modelovanje reprezentativnih čestica elektrohemijski istaloženog bakarnog praha
EP  - 400
IS  - 4
SP  - 397
VL  - 71
DO  - 10.2298/JSC0604397P
ER  - 

@article{
author = "Popov, Konstantin I. and Nikolić, Nebojša D. and Krstić, Snežana B. and Pavlović, Miomir",
year = "2006",
abstract = "A method for the estimation of the size of the representative particle of a copper powder is given. Cross sections of representative particles of flowing and non-flowing powders estimated by this procedure are also presented., U radu je dat metod za procenu veličine reprezentativnih čestica bakarnog praha. Predstavljeni su poprečni preseci reprezentativne čestice tečljivog i netečljivog praha dobijeni korišćenjem ovog postupka.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Physical modeling of representative particles of electrodeposited copper powders, Fizičko modelovanje reprezentativnih čestica elektrohemijski istaloženog bakarnog praha",
pages = "400-397",
number = "4",
volume = "71",
doi = "10.2298/JSC0604397P"
}

Popov, K. I., Nikolić, N. D., Krstić, S. B.,& Pavlović, M.. (2006). Physical modeling of representative particles of electrodeposited copper powders. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 71(4), 397-400.
https://doi.org/10.2298/JSC0604397P

Popov KI, Nikolić ND, Krstić SB, Pavlović M. Physical modeling of representative particles of electrodeposited copper powders. in Journal of the Serbian Chemical Society. 2006;71(4):397-400.
doi:10.2298/JSC0604397P .

Popov, Konstantin I., Nikolić, Nebojša D., Krstić, Snežana B., Pavlović, Miomir, "Physical modeling of representative particles of electrodeposited copper powders" in Journal of the Serbian Chemical Society, 71, no. 4 (2006):397-400,
https://doi.org/10.2298/JSC0604397P . .

TY  - JOUR
AU  - Jović, Vladimir D.
AU  - Maksimović, Vesna M.
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5448
AB  - In this paper the morphology (SEM analysis), the internal structure (cross-section analysis) and the growth mechanism of Ni and Co powders electrodeposited from ammoniacal electrolyte are investigated. It is shown that morphology and the internal structure of those powders are quite different. For Ni powder, all particles are of the same morphology, cauliflower-like type. In the case of Co powder, generally two types of particles are detected: (1) dendrite particles and (2) different types of agglomerates, compact, spongy-like and ball-like ones. The growth mechanism for all agglomerates is based on the fact that with the time of growth the disperse (dendrite) agglomerate is branching in different directions and at the tip of each branch spherical diffusion takes over the planar one, providing conditions for the growth of compact deposit. After some time, these branches form compact deposit all over the agglomerate surface and the same agglomerate further grows as a compact one, until it falls off from the electrode surface. Characteristic of all agglomerates is the presence of deep cavities on their surface and the fern-like dendrites on the bottom for most of these cavities.
PB  - Springer, New York
T2  - Journal of Solid State Electrochemistry
T1  - Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders
EP  - 379
IS  - 6
SP  - 373
VL  - 10
DO  - 10.1007/s10008-005-0687-1
ER  - 

@article{
author = "Jović, Vladimir D. and Maksimović, Vesna M. and Pavlović, Miomir and Popov, Konstantin I.",
year = "2006",
abstract = "In this paper the morphology (SEM analysis), the internal structure (cross-section analysis) and the growth mechanism of Ni and Co powders electrodeposited from ammoniacal electrolyte are investigated. It is shown that morphology and the internal structure of those powders are quite different. For Ni powder, all particles are of the same morphology, cauliflower-like type. In the case of Co powder, generally two types of particles are detected: (1) dendrite particles and (2) different types of agglomerates, compact, spongy-like and ball-like ones. The growth mechanism for all agglomerates is based on the fact that with the time of growth the disperse (dendrite) agglomerate is branching in different directions and at the tip of each branch spherical diffusion takes over the planar one, providing conditions for the growth of compact deposit. After some time, these branches form compact deposit all over the agglomerate surface and the same agglomerate further grows as a compact one, until it falls off from the electrode surface. Characteristic of all agglomerates is the presence of deep cavities on their surface and the fern-like dendrites on the bottom for most of these cavities.",
publisher = "Springer, New York",
journal = "Journal of Solid State Electrochemistry",
title = "Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders",
pages = "379-373",
number = "6",
volume = "10",
doi = "10.1007/s10008-005-0687-1"
}

Jović, V. D., Maksimović, V. M., Pavlović, M.,& Popov, K. I.. (2006). Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders. in Journal of Solid State Electrochemistry
Springer, New York., 10(6), 373-379.
https://doi.org/10.1007/s10008-005-0687-1

Jović VD, Maksimović VM, Pavlović M, Popov KI. Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders. in Journal of Solid State Electrochemistry. 2006;10(6):373-379.
doi:10.1007/s10008-005-0687-1 .

Jović, Vladimir D., Maksimović, Vesna M., Pavlović, Miomir, Popov, Konstantin I., "Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders" in Journal of Solid State Electrochemistry, 10, no. 6 (2006):373-379,
https://doi.org/10.1007/s10008-005-0687-1 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Pavlović, Ljubica J.
AU  - Pavlović, Miomir
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5447
AB  - Morphologies of copper deposits obtained at overpotentials belonging to the plateau of the limiting diffusion current density and at higheroverpotentials were examined by the scanning electron microscopy (SEM) technique. Copper dendrites are formed at overpotentials belonging tothe plateau of the limiting diffusion current density. The shape of copper dendrites depends on the electrodeposition overpotential. At higheroverpotentials (800 and 1000 mV) and larger values of current densities, porous and very disperse copper deposits were obtained. Thesemorphologies were a consequence of a very vigorous hydrogen evolution at these electrodeposition overpotentials. Also, the obtained copperstructures consisted of agglomerates of copper grains. The size of copper grains is a function of the overpotential of electrodeposition, thusapproaching to nano-sized dimensions is achieved when the electrodeposition overpotential is increased.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Morphologies of copper deposits obtained by the electrodeposition at high overpotentials
EP  - 566
IS  - 3-4
SP  - 560
VL  - 201
DO  - 10.1016/j.surfcoat.2005.12.004
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlović, Ljubica J. and Pavlović, Miomir",
year = "2006",
abstract = "Morphologies of copper deposits obtained at overpotentials belonging to the plateau of the limiting diffusion current density and at higheroverpotentials were examined by the scanning electron microscopy (SEM) technique. Copper dendrites are formed at overpotentials belonging tothe plateau of the limiting diffusion current density. The shape of copper dendrites depends on the electrodeposition overpotential. At higheroverpotentials (800 and 1000 mV) and larger values of current densities, porous and very disperse copper deposits were obtained. Thesemorphologies were a consequence of a very vigorous hydrogen evolution at these electrodeposition overpotentials. Also, the obtained copperstructures consisted of agglomerates of copper grains. The size of copper grains is a function of the overpotential of electrodeposition, thusapproaching to nano-sized dimensions is achieved when the electrodeposition overpotential is increased.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Morphologies of copper deposits obtained by the electrodeposition at high overpotentials",
pages = "566-560",
number = "3-4",
volume = "201",
doi = "10.1016/j.surfcoat.2005.12.004"
}

Nikolić, N. D., Popov, K. I., Pavlović, L. J.,& Pavlović, M.. (2006). Morphologies of copper deposits obtained by the electrodeposition at high overpotentials. in Surface and Coatings Technology
Elsevier., 201(3-4), 560-566.
https://doi.org/10.1016/j.surfcoat.2005.12.004

Nikolić ND, Popov KI, Pavlović LJ, Pavlović M. Morphologies of copper deposits obtained by the electrodeposition at high overpotentials. in Surface and Coatings Technology. 2006;201(3-4):560-566.
doi:10.1016/j.surfcoat.2005.12.004 .

Nikolić, Nebojša D., Popov, Konstantin I., Pavlović, Ljubica J., Pavlović, Miomir, "Morphologies of copper deposits obtained by the electrodeposition at high overpotentials" in Surface and Coatings Technology, 201, no. 3-4 (2006):560-566,
https://doi.org/10.1016/j.surfcoat.2005.12.004 . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2004
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5417
AB  - The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes.
AB  - Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current
T1  - Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom
EP  - 51
IS  - 1
SP  - 43
VL  - 69
DO  - 10.2298/JSC0401043P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2004",
abstract = "The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes., Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current, Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom",
pages = "51-43",
number = "1",
volume = "69",
doi = "10.2298/JSC0401043P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(1), 43-51.
https://doi.org/10.2298/JSC0401043P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society. 2004;69(1):43-51.
doi:10.2298/JSC0401043P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current" in Journal of the Serbian Chemical Society, 69, no. 1 (2004):43-51,
https://doi.org/10.2298/JSC0401043P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5395
AB  - A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 exhibit free flow. This is in good agreement with the literature data.
AB  - Razmatrana je metoda određivanja kritične nasipne mase, pri kojoj dolazi do tečenja elektrohemijski taloženog praha bakra. Nađeno je da tečenje postoji kod prahova čija je nasipna masa veća od 2.3 g/cm3, što je u saglasnosti sa literaturnim podacima.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The critical apparent density for the free flow of copper powder
T1  - Kritična nasipna masa za tečenje praha bakra
EP  - 513
IS  - 6
SP  - 511
VL  - 68
DO  - 10.2298/JSC0306511P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Pavlović, Miomir",
year = "2003",
abstract = "A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 exhibit free flow. This is in good agreement with the literature data., Razmatrana je metoda određivanja kritične nasipne mase, pri kojoj dolazi do tečenja elektrohemijski taloženog praha bakra. Nađeno je da tečenje postoji kod prahova čija je nasipna masa veća od 2.3 g/cm3, što je u saglasnosti sa literaturnim podacima.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The critical apparent density for the free flow of copper powder, Kritična nasipna masa za tečenje praha bakra",
pages = "513-511",
number = "6",
volume = "68",
doi = "10.2298/JSC0306511P"
}

Popov, K. I., Krstić, S. B.,& Pavlović, M.. (2003). The critical apparent density for the free flow of copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(6), 511-513.
https://doi.org/10.2298/JSC0306511P

Popov KI, Krstić SB, Pavlović M. The critical apparent density for the free flow of copper powder. in Journal of the Serbian Chemical Society. 2003;68(6):511-513.
doi:10.2298/JSC0306511P .

Popov, Konstantin I., Krstić, Snežana B., Pavlović, Miomir, "The critical apparent density for the free flow of copper powder" in Journal of the Serbian Chemical Society, 68, no. 6 (2003):511-513,
https://doi.org/10.2298/JSC0306511P . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5390
AB  - The current efficiency during the cathodic period of reversing current in copper powder deposition was determined by measuring the quantity of hydrogen evolved. The diagrams from which the instantaneous and average current efficiencies for copper deposition can be extracted for any deposition time up to 30 min are given. A procedure for the calculation of the overall current efficiency is proposed.
AB  - Određivano je iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha, merenjem količine izdvojenog vodonika. Dati su dijagrami iz kojih mogu biti izračunata trenutna i srednja iskorišćenja struje za taloženje bakarnog praha, za bilo koje vreme taloženja do 30 minuta. Predložen je postupak proračuna ukupnog iskorišćenja struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency
T1  - Iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha i ukupno iskorišćenje struje
EP  - 656
IS  - 8-9
SP  - 649
VL  - 68
DO  - 10.2298/JSC0309649P
ER  - 

@article{
author = "Pavlović, Miomir and Nikolić, Nebojša D. and Popov, Konstantin I.",
year = "2003",
abstract = "The current efficiency during the cathodic period of reversing current in copper powder deposition was determined by measuring the quantity of hydrogen evolved. The diagrams from which the instantaneous and average current efficiencies for copper deposition can be extracted for any deposition time up to 30 min are given. A procedure for the calculation of the overall current efficiency is proposed., Određivano je iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha, merenjem količine izdvojenog vodonika. Dati su dijagrami iz kojih mogu biti izračunata trenutna i srednja iskorišćenja struje za taloženje bakarnog praha, za bilo koje vreme taloženja do 30 minuta. Predložen je postupak proračuna ukupnog iskorišćenja struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency, Iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha i ukupno iskorišćenje struje",
pages = "656-649",
number = "8-9",
volume = "68",
doi = "10.2298/JSC0309649P"
}

Pavlović, M., Nikolić, N. D.,& Popov, K. I.. (2003). The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(8-9), 649-656.
https://doi.org/10.2298/JSC0309649P

Pavlović M, Nikolić ND, Popov KI. The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency. in Journal of the Serbian Chemical Society. 2003;68(8-9):649-656.
doi:10.2298/JSC0309649P .

Pavlović, Miomir, Nikolić, Nebojša D., Popov, Konstantin I., "The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency" in Journal of the Serbian Chemical Society, 68, no. 8-9 (2003):649-656,
https://doi.org/10.2298/JSC0309649P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5389
AB  - One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.
AB  - Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha
EP  - 778
IS  - 10
SP  - 771
VL  - 68
DO  - 10.2298/JSC0310771P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2003",
abstract = "One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed., Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha",
pages = "778-771",
number = "10",
volume = "68",
doi = "10.2298/JSC0310771P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2003). The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 771-778.
https://doi.org/10.2298/JSC0310771P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):771-778.
doi:10.2298/JSC0310771P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):771-778,
https://doi.org/10.2298/JSC0310771P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
PY  - 2003
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5388
AB  - An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles.
AB  - Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha
EP  - 783
IS  - 10
SP  - 779
VL  - 68
DO  - 10.2298/JSC0310779P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica and Krstić, Snežana B. and Obradović, Milutin Č.",
year = "2003",
abstract = "An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles., Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha",
pages = "783-779",
number = "10",
volume = "68",
doi = "10.2298/JSC0310779P"
}

Popov, K. I., Pavlović, M., Pavlović, L., Ivanović, E., Krstić, S. B.,& Obradović, M. Č.. (2003). The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 779-783.
https://doi.org/10.2298/JSC0310779P

Popov KI, Pavlović M, Pavlović L, Ivanović E, Krstić SB, Obradović MČ. The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):779-783.
doi:10.2298/JSC0310779P .

Popov, Konstantin I., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, Krstić, Snežana B., Obradović, Milutin Č., "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):779-783,
https://doi.org/10.2298/JSC0310779P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Radmilović, Velimir R.
AU  - Pavlović, Miomir
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5378
AB  - The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by changing shape of the reversing current wave and, hence, the apparent density of powders. The relation of apparent density with particle morphology and structure was illustrated.
AB  - U radu je pokazana mogućnost dobijanja bakarnih prahova različitih nasipnih masa promenom oblika talasa reversne struje. Uspostavljena je zadovoljavajuća veza između morfologije i strukture čestica praha bakra i nasipne mase praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of reversing current deposition on the apparent density of electrolytic copper powder
T1  - Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha
EP  - 67
IS  - 1
SP  - 61
VL  - 67
DO  - 10.2298/JSC0201061P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Ljubica and Ivanović, Evica and Radmilović, Velimir R. and Pavlović, Miomir",
year = "2002",
abstract = "The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by changing shape of the reversing current wave and, hence, the apparent density of powders. The relation of apparent density with particle morphology and structure was illustrated., U radu je pokazana mogućnost dobijanja bakarnih prahova različitih nasipnih masa promenom oblika talasa reversne struje. Uspostavljena je zadovoljavajuća veza između morfologije i strukture čestica praha bakra i nasipne mase praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of reversing current deposition on the apparent density of electrolytic copper powder, Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha",
pages = "67-61",
number = "1",
volume = "67",
doi = "10.2298/JSC0201061P"
}

Popov, K. I., Pavlović, L., Ivanović, E., Radmilović, V. R.,& Pavlović, M.. (2002). The effect of reversing current deposition on the apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(1), 61-67.
https://doi.org/10.2298/JSC0201061P

Popov KI, Pavlović L, Ivanović E, Radmilović VR, Pavlović M. The effect of reversing current deposition on the apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society. 2002;67(1):61-67.
doi:10.2298/JSC0201061P .

Popov, Konstantin I., Pavlović, Ljubica, Ivanović, Evica, Radmilović, Velimir R., Pavlović, Miomir, "The effect of reversing current deposition on the apparent density of electrolytic copper powder" in Journal of the Serbian Chemical Society, 67, no. 1 (2002):61-67,
https://doi.org/10.2298/JSC0201061P . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Pavlović, Lj.J.
AU  - Ivanović, Evica
AU  - Radmilović, V.
AU  - Popov, Konstantin I.
PY  - 2001
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5354
AB  - The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder.
AB  - Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of particle structure on apparent density of electrolytic copper powder
T1  - Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha
EP  - 933
IS  - 11-12
SP  - 923
VL  - 66
DO  - 10.2298/jsc0112923p
UR  - https://hdl.handle.net/21.15107/rcub_cer_28
ER  - 

@article{
author = "Pavlović, Miomir and Pavlović, Lj.J. and Ivanović, Evica and Radmilović, V. and Popov, Konstantin I.",
year = "2001",
abstract = "The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder., Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of particle structure on apparent density of electrolytic copper powder, Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha",
pages = "933-923",
number = "11-12",
volume = "66",
doi = "10.2298/jsc0112923p",
url = "https://hdl.handle.net/21.15107/rcub_cer_28"
}

Pavlović, M., Pavlović, Lj.J., Ivanović, E., Radmilović, V.,& Popov, K. I.. (2001). The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 66(11-12), 923-933.
https://doi.org/10.2298/jsc0112923p
https://hdl.handle.net/21.15107/rcub_cer_28

Pavlović M, Pavlović L, Ivanović E, Radmilović V, Popov KI. The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society. 2001;66(11-12):923-933.
doi:10.2298/jsc0112923p
https://hdl.handle.net/21.15107/rcub_cer_28 .

Pavlović, Miomir, Pavlović, Lj.J., Ivanović, Evica, Radmilović, V., Popov, Konstantin I., "The effect of particle structure on apparent density of electrolytic copper powder" in Journal of the Serbian Chemical Society, 66, no. 11-12 (2001):923-933,
https://doi.org/10.2298/jsc0112923p .,
https://hdl.handle.net/21.15107/rcub_cer_28 .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Pavlović, Miomir
AU  - Stojanović, Miodrag
PY  - 2000
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5324
AB  - The structures of bright zinc coatings obtained from acid sulfate solutions in the presenceof dextrin/salicylaldehyde mixture were examined. It was shown by the STM technique that the surfaces of bright zinc coatings are covered by hexagonal zinc crys­tals, the tops of planes of which are flat and mutually parallel and which exhibit smooth­ness on the atomic level. X-Ray diffraction (XRD) analysis of the bright zinc coatings showed that the zinc crystallites are oriented in the (110) plane only.
AB  - Ispitana je struktura sjajnih prevlaka cinka istaloženih iz kiselog sulfatnog elektrolita sa dodatkom dekstrina i salicil aldehida. Pokazano je da je površina sjajnih prevlaka pokrivena heksagonalnim kristalima cinka, čiji vrhovi su ravni i međusobno paralelni, i koji su glatki na atomskom nivou. Rendgensko-difrakciona analiza sjajnih prevlaka cinka je pokazala da su kristaliti cinka orijentisani samo u (110) ravni.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The structure of bright zinc coatings
T1  - Struktura sjajnih prevlaka cinka
EP  - 827
IS  - 11
SP  - 819
VL  - 65
DO  - 10.2298/jsc0011819n
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Rakočević, Zlatko Lj. and Đurović, Dejan and Pavlović, Miomir and Stojanović, Miodrag",
year = "2000",
abstract = "The structures of bright zinc coatings obtained from acid sulfate solutions in the presenceof dextrin/salicylaldehyde mixture were examined. It was shown by the STM technique that the surfaces of bright zinc coatings are covered by hexagonal zinc crys­tals, the tops of planes of which are flat and mutually parallel and which exhibit smooth­ness on the atomic level. X-Ray diffraction (XRD) analysis of the bright zinc coatings showed that the zinc crystallites are oriented in the (110) plane only., Ispitana je struktura sjajnih prevlaka cinka istaloženih iz kiselog sulfatnog elektrolita sa dodatkom dekstrina i salicil aldehida. Pokazano je da je površina sjajnih prevlaka pokrivena heksagonalnim kristalima cinka, čiji vrhovi su ravni i međusobno paralelni, i koji su glatki na atomskom nivou. Rendgensko-difrakciona analiza sjajnih prevlaka cinka je pokazala da su kristaliti cinka orijentisani samo u (110) ravni.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The structure of bright zinc coatings, Struktura sjajnih prevlaka cinka",
pages = "827-819",
number = "11",
volume = "65",
doi = "10.2298/jsc0011819n"
}

Nikolić, N. D., Popov, K. I., Rakočević, Z. Lj., Đurović, D., Pavlović, M.,& Stojanović, M.. (2000). The structure of bright zinc coatings. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 65(11), 819-827.
https://doi.org/10.2298/jsc0011819n

Nikolić ND, Popov KI, Rakočević ZL, Đurović D, Pavlović M, Stojanović M. The structure of bright zinc coatings. in Journal of the Serbian Chemical Society. 2000;65(11):819-827.
doi:10.2298/jsc0011819n .

Nikolić, Nebojša D., Popov, Konstantin I., Rakočević, Zlatko Lj., Đurović, Dejan, Pavlović, Miomir, Stojanović, Miodrag, "The structure of bright zinc coatings" in Journal of the Serbian Chemical Society, 65, no. 11 (2000):819-827,
https://doi.org/10.2298/jsc0011819n . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Grgur, Branimir
AU  - Stojilković, Evica R.
AU  - Pavlović, Miomir G.
AU  - Nikolić, Nebojša D.
PY  - 1997
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/110
AB  - The initial stage of thin surface metal film formation on inert substrate is considered. The simultaneous action of both active centers and nucleation exclusion zones was taken into consideration when discussing the saturation nucleus density. The saturation nucleus density increases with increasing number of active centers and decreasing the radii of nucleation exclusion zones (enhancing the thin metal film formation). At one at the same deposition current density deposition overpotential increases with decreasing deposition process exchange current density, leading to the increase in the number of active centers and to decrease of crystallization overpotential and radii of nucleation exclusion zones. Because of this compact surface metal film will be formed at a lower quantity of electrodeposited metal with a decrease in exchange current density.
PB  - Serbian Chemical Society, Belgrade
T2  - Journal of the Serbian Chemical Society
T1  - The effect of deposition process exchange current density on the thin metal film formation on inert substrate
EP  - 442
IS  - 5
SP  - 433
VL  - 62
UR  - https://hdl.handle.net/21.15107/rcub_technorep_110
ER  - 

@article{
author = "Popov, Konstantin I. and Grgur, Branimir and Stojilković, Evica R. and Pavlović, Miomir G. and Nikolić, Nebojša D.",
year = "1997",
abstract = "The initial stage of thin surface metal film formation on inert substrate is considered. The simultaneous action of both active centers and nucleation exclusion zones was taken into consideration when discussing the saturation nucleus density. The saturation nucleus density increases with increasing number of active centers and decreasing the radii of nucleation exclusion zones (enhancing the thin metal film formation). At one at the same deposition current density deposition overpotential increases with decreasing deposition process exchange current density, leading to the increase in the number of active centers and to decrease of crystallization overpotential and radii of nucleation exclusion zones. Because of this compact surface metal film will be formed at a lower quantity of electrodeposited metal with a decrease in exchange current density.",
publisher = "Serbian Chemical Society, Belgrade",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of deposition process exchange current density on the thin metal film formation on inert substrate",
pages = "442-433",
number = "5",
volume = "62",
url = "https://hdl.handle.net/21.15107/rcub_technorep_110"
}

Popov, K. I., Grgur, B., Stojilković, E. R., Pavlović, M. G.,& Nikolić, N. D.. (1997). The effect of deposition process exchange current density on the thin metal film formation on inert substrate. in Journal of the Serbian Chemical Society
Serbian Chemical Society, Belgrade., 62(5), 433-442.
https://hdl.handle.net/21.15107/rcub_technorep_110

Popov KI, Grgur B, Stojilković ER, Pavlović MG, Nikolić ND. The effect of deposition process exchange current density on the thin metal film formation on inert substrate. in Journal of the Serbian Chemical Society. 1997;62(5):433-442.
https://hdl.handle.net/21.15107/rcub_technorep_110 .

Popov, Konstantin I., Grgur, Branimir, Stojilković, Evica R., Pavlović, Miomir G., Nikolić, Nebojša D., "The effect of deposition process exchange current density on the thin metal film formation on inert substrate" in Journal of the Serbian Chemical Society, 62, no. 5 (1997):433-442,
https://hdl.handle.net/21.15107/rcub_technorep_110 .