TY  - JOUR
AU  - Matijašević, Srdjan D.
AU  - Topalović, Vladimir S.
AU  - Grujić, Snežana
AU  - Savić, Veljko V.
AU  - Nikolić, Jelena D.
AU  - Labus, Nebojsa J.
AU  - Zildzović, Snezana N.
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4818
AB  - The selected lithium germanium-phosphate glass was prepared by a conventional melt-quenching technique. The XRD method was employed to confirm the glass was obtained and to reveal crystalline phases during heat treatment. The dilatometry (DIL), differential thermal analysis (DTA), and differential scanning calorimetry (DSC) were used to determine the characteristic temperatures and enthalpies of crystallization and melting of the crystalline phase. The DTA and DIL were used to obtain the viscosity curves by applying the VogelFulcher-Tammann (VFT) equation.
T2  - Science of Sintering
T1  - The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass
EP  - 310
IS  - 3
SP  - 301
VL  - 53
DO  - 10.2298/SOS2103301M
ER  - 

@article{
author = "Matijašević, Srdjan D. and Topalović, Vladimir S. and Grujić, Snežana and Savić, Veljko V. and Nikolić, Jelena D. and Labus, Nebojsa J. and Zildzović, Snezana N.",
year = "2021",
abstract = "The selected lithium germanium-phosphate glass was prepared by a conventional melt-quenching technique. The XRD method was employed to confirm the glass was obtained and to reveal crystalline phases during heat treatment. The dilatometry (DIL), differential thermal analysis (DTA), and differential scanning calorimetry (DSC) were used to determine the characteristic temperatures and enthalpies of crystallization and melting of the crystalline phase. The DTA and DIL were used to obtain the viscosity curves by applying the VogelFulcher-Tammann (VFT) equation.",
journal = "Science of Sintering",
title = "The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass",
pages = "310-301",
number = "3",
volume = "53",
doi = "10.2298/SOS2103301M"
}

Matijašević, S. D., Topalović, V. S., Grujić, S., Savić, V. V., Nikolić, J. D., Labus, N. J.,& Zildzović, S. N.. (2021). The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass. in Science of Sintering, 53(3), 301-310.
https://doi.org/10.2298/SOS2103301M

Matijašević SD, Topalović VS, Grujić S, Savić VV, Nikolić JD, Labus NJ, Zildzović SN. The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass. in Science of Sintering. 2021;53(3):301-310.
doi:10.2298/SOS2103301M .

Matijašević, Srdjan D., Topalović, Vladimir S., Grujić, Snežana, Savić, Veljko V., Nikolić, Jelena D., Labus, Nebojsa J., Zildzović, Snezana N., "The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass" in Science of Sintering, 53, no. 3 (2021):301-310,
https://doi.org/10.2298/SOS2103301M . .

TY  - JOUR
AU  - Savic, Veljko
AU  - Topalovic, Vladimir
AU  - Matijasevic, Srdan
AU  - Nikolic, Jelena
AU  - Grujić, Snežana
AU  - Zildzovic, Snezana
AU  - Radulovic, Aleksandra
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4890
AB  - In this study, the glass-composite was prepared using glass cullet and waste foundry sand as raw materials. The powder technology route was employed. The mixtures containing 10-50 wt% of the sand were sintered at T = 750 degrees C for t =1h. XRD and DTA analyses were performed. The chemical durability of the resulting glass-composite was determined by leaching test in HCl, H2SO4, NaOH and distilled water at T = 95 degrees C for t =1h. It was shown that the sintering process carried out without the crystallization of the glass matrix. The lowest chemical durability was determined in alkali solution of glasscomposite.
T2  - Metallurgical & Materials Engineering
T1  - Chemical durability of sintered glass-composite prepared from glass cullet and waste foundry sand
EP  - 113
IS  - 1
SP  - 105
VL  - 27
DO  - 10.30544/477
ER  - 

@article{
author = "Savic, Veljko and Topalovic, Vladimir and Matijasevic, Srdan and Nikolic, Jelena and Grujić, Snežana and Zildzovic, Snezana and Radulovic, Aleksandra",
year = "2021",
abstract = "In this study, the glass-composite was prepared using glass cullet and waste foundry sand as raw materials. The powder technology route was employed. The mixtures containing 10-50 wt% of the sand were sintered at T = 750 degrees C for t =1h. XRD and DTA analyses were performed. The chemical durability of the resulting glass-composite was determined by leaching test in HCl, H2SO4, NaOH and distilled water at T = 95 degrees C for t =1h. It was shown that the sintering process carried out without the crystallization of the glass matrix. The lowest chemical durability was determined in alkali solution of glasscomposite.",
journal = "Metallurgical & Materials Engineering",
title = "Chemical durability of sintered glass-composite prepared from glass cullet and waste foundry sand",
pages = "113-105",
number = "1",
volume = "27",
doi = "10.30544/477"
}

Savic, V., Topalovic, V., Matijasevic, S., Nikolic, J., Grujić, S., Zildzovic, S.,& Radulovic, A.. (2021). Chemical durability of sintered glass-composite prepared from glass cullet and waste foundry sand. in Metallurgical & Materials Engineering, 27(1), 105-113.
https://doi.org/10.30544/477

Savic V, Topalovic V, Matijasevic S, Nikolic J, Grujić S, Zildzovic S, Radulovic A. Chemical durability of sintered glass-composite prepared from glass cullet and waste foundry sand. in Metallurgical & Materials Engineering. 2021;27(1):105-113.
doi:10.30544/477 .

Savic, Veljko, Topalovic, Vladimir, Matijasevic, Srdan, Nikolic, Jelena, Grujić, Snežana, Zildzovic, Snezana, Radulovic, Aleksandra, "Chemical durability of sintered glass-composite prepared from glass cullet and waste foundry sand" in Metallurgical & Materials Engineering, 27, no. 1 (2021):105-113,
https://doi.org/10.30544/477 . .