TY  - JOUR
AU  - Dojčinović, Marina
AU  - Pavlović, Marko
AU  - Jezdimirović, Slađana
AU  - Purić, Branka
AU  - Cvetković, Aleksandar
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7060
AB  - Cavitation resistance of polymer matrix / basalt powder composites was determined in this work. Two types of composites
were tested: epoxy resin / basalt powder composite and polyester resin / basalt powder composite. In both cases, a basalt
powder was used as reinforcement in the resin (grain size 20μm, in the amount of 15 wt%). An ultrasonic vibration method
with a stationary sample was used to test the cavitation resistance of composites in laboratory conditions. The change in
sample mass with test time was monitored to define cavitation rate. Scanning electron microscopy was used to monitor the
morphology of composites surface damage.
PB  - University of Novi Sad, Faculty of Technical Sciences
T2  - Advanced Technologies & Materials
T1  - Influence of the polymer matrix type on cavitation resistance of composites
EP  - 34
IS  - 1
SP  - 31
VL  - 46
DO  - 10.24867/ATM-2021-1-006
ER  - 

@article{
author = "Dojčinović, Marina and Pavlović, Marko and Jezdimirović, Slađana and Purić, Branka and Cvetković, Aleksandar",
year = "2021",
abstract = "Cavitation resistance of polymer matrix / basalt powder composites was determined in this work. Two types of composites
were tested: epoxy resin / basalt powder composite and polyester resin / basalt powder composite. In both cases, a basalt
powder was used as reinforcement in the resin (grain size 20μm, in the amount of 15 wt%). An ultrasonic vibration method
with a stationary sample was used to test the cavitation resistance of composites in laboratory conditions. The change in
sample mass with test time was monitored to define cavitation rate. Scanning electron microscopy was used to monitor the
morphology of composites surface damage.",
publisher = "University of Novi Sad, Faculty of Technical Sciences",
journal = "Advanced Technologies & Materials",
title = "Influence of the polymer matrix type on cavitation resistance of composites",
pages = "34-31",
number = "1",
volume = "46",
doi = "10.24867/ATM-2021-1-006"
}

Dojčinović, M., Pavlović, M., Jezdimirović, S., Purić, B.,& Cvetković, A.. (2021). Influence of the polymer matrix type on cavitation resistance of composites. in Advanced Technologies & Materials
University of Novi Sad, Faculty of Technical Sciences., 46(1), 31-34.
https://doi.org/10.24867/ATM-2021-1-006

Dojčinović M, Pavlović M, Jezdimirović S, Purić B, Cvetković A. Influence of the polymer matrix type on cavitation resistance of composites. in Advanced Technologies & Materials. 2021;46(1):31-34.
doi:10.24867/ATM-2021-1-006 .

Dojčinović, Marina, Pavlović, Marko, Jezdimirović, Slađana, Purić, Branka, Cvetković, Aleksandar, "Influence of the polymer matrix type on cavitation resistance of composites" in Advanced Technologies & Materials, 46, no. 1 (2021):31-34,
https://doi.org/10.24867/ATM-2021-1-006 . .

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Dojčinović, Marina
AU  - Jezdimirović, Slađana
AU  - Purić, Branka
AU  - Pavlović, Marko
AU  - Cvetković, Aleksandar
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7058
AB  - Pirofilit je mineralna sirovina pogodna za izradu šireg spektra proizvoda i primenu u različitim granama privrede (građevinarstvu, poljoprivredi, industriji hartije). Tehnologija prerade stena pirofilita je ekološki čista, a proizvodi dobijeni tehnološkom preradom pirofilita nisu kancerogeni. 
U radu su ispitivani uzorci pirofilita sinterovani na temperaturi 1150 ºC. Polazni uzorak pirofilita  dobijen je iz ležišta Parsović-BiH. Eksperimentalno je određena otpornost ovog vatrostalnog uzorka na dejstvo kavitacije primenom ultrazvučne vibracione metode sa stacionarnim uzorkom prema standardu ASTM G32. Na osnovu vrednosti kavitacione brzine i analize morfologije oštećenja površine određena je otpornost na dejstvo kavitacije ispitivanog uzorka na bazi pirofilita i procenjena mogućnost njihove primene u hidrodinamičkim uslovima eksploatacije u kojima se očekuje pojava kavitacije.
AB  - Pyrophyllite is a mineral raw material suitable for the production of a wider range of products and application in various branches of the economy (construction, agriculture, paper industry). 
The technology of pyrophyllite rock processing is ecologically clean, and the products obtained by technological processing of pyrophyllite are not carcinogenic. The paper tested pyrophyllite sample sintered at temperaturi 1150 ºC. Initial sample of pyrophyllite were obtained from the Parsović-BiH deposit. The resistance of these refractory sample to the action of cavitation was determined experimentally using the ultrasonic vibration method with a stationary sample according to the ASTM G32 standard. Based on the value of cavitation velocity and analysis of surface damage morphology, the resistance to cavitation of these sample based on pyrophyllite was determined and the possibility of their application in hydrodynamic operating conditions in which cavitation is expected was asessed.
PB  - Zenica : Faculty of Mechanical Engineering
C3  - Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
T1  - OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI
T1  - QUALITY ASSESSMENT OF SINTERED PYROPHYLLITE USING THE METHOD OF CAVITATION RESISTANCE TESTING
EP  - 100
SP  - 95
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7058
ER  - 

@conference{
author = "Andrić, Ljubiša and Dojčinović, Marina and Jezdimirović, Slađana and Purić, Branka and Pavlović, Marko and Cvetković, Aleksandar",
year = "2021",
abstract = "Pirofilit je mineralna sirovina pogodna za izradu šireg spektra proizvoda i primenu u različitim granama privrede (građevinarstvu, poljoprivredi, industriji hartije). Tehnologija prerade stena pirofilita je ekološki čista, a proizvodi dobijeni tehnološkom preradom pirofilita nisu kancerogeni. 
U radu su ispitivani uzorci pirofilita sinterovani na temperaturi 1150 ºC. Polazni uzorak pirofilita  dobijen je iz ležišta Parsović-BiH. Eksperimentalno je određena otpornost ovog vatrostalnog uzorka na dejstvo kavitacije primenom ultrazvučne vibracione metode sa stacionarnim uzorkom prema standardu ASTM G32. Na osnovu vrednosti kavitacione brzine i analize morfologije oštećenja površine određena je otpornost na dejstvo kavitacije ispitivanog uzorka na bazi pirofilita i procenjena mogućnost njihove primene u hidrodinamičkim uslovima eksploatacije u kojima se očekuje pojava kavitacije., Pyrophyllite is a mineral raw material suitable for the production of a wider range of products and application in various branches of the economy (construction, agriculture, paper industry). 
The technology of pyrophyllite rock processing is ecologically clean, and the products obtained by technological processing of pyrophyllite are not carcinogenic. The paper tested pyrophyllite sample sintered at temperaturi 1150 ºC. Initial sample of pyrophyllite were obtained from the Parsović-BiH deposit. The resistance of these refractory sample to the action of cavitation was determined experimentally using the ultrasonic vibration method with a stationary sample according to the ASTM G32 standard. Based on the value of cavitation velocity and analysis of surface damage morphology, the resistance to cavitation of these sample based on pyrophyllite was determined and the possibility of their application in hydrodynamic operating conditions in which cavitation is expected was asessed.",
publisher = "Zenica : Faculty of Mechanical Engineering",
journal = "Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021",
title = "OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI, QUALITY ASSESSMENT OF SINTERED PYROPHYLLITE USING THE METHOD OF CAVITATION RESISTANCE TESTING",
pages = "100-95",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7058"
}

Andrić, L., Dojčinović, M., Jezdimirović, S., Purić, B., Pavlović, M.,& Cvetković, A.. (2021). OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
Zenica : Faculty of Mechanical Engineering., 95-100.
https://hdl.handle.net/21.15107/rcub_technorep_7058

Andrić L, Dojčinović M, Jezdimirović S, Purić B, Pavlović M, Cvetković A. OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021. 2021;:95-100.
https://hdl.handle.net/21.15107/rcub_technorep_7058 .

Andrić, Ljubiša, Dojčinović, Marina, Jezdimirović, Slađana, Purić, Branka, Pavlović, Marko, Cvetković, Aleksandar, "OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI" in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021 (2021):95-100,
https://hdl.handle.net/21.15107/rcub_technorep_7058 .

TY  - CONF
AU  - Dojčinović, Marina
AU  - Purić, Branka
AU  - Jezdimirović, Slađana
AU  - Kovačević, Andrej
AU  - Pavlović, Marko
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7059
AB  - U radu je analizirana morfologija kavitacionog oštećenja martenzitnog nerđajućeg čelika. Za ispitivanje otpornosti na dejstvo kavitacije, u laboratorijskim uslovima je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćenjem promene mase uzorka u funkciji vremena dejstva kavitacije određena je kavitaciona brzina čelika, kao mera otpornosti čelika na dejstvo kavitacije. Tokom ispitivanja primenjena je skenirajuća elektronska mikroskopija (SEM) koja je omogućila analizu morfologije kavitacionog oštećenja ovog materijala. Dobijeni rezultati ispitivanja pokazali su visoku otpornost martenzitnog nerđajućeg čelika na dejstvo kavitacije.
AB  - The morphology of cavitation damage of martensitic stainless steel was analyzed in this paper. Ultrasonic vibration method with a stationary sample was applied for cavitation resistance testing in laboratory conditions. By monitoring the change in the mass of the sample as a function of the time of cavitation action, the cavitation rate of steel was determined as a measure of the cavitation resistance of steel. During the examination, scanning electron microscopy (SEM) was applied, which enabled the analysis of the morphology of cavitation damage of this material. The obtained test results showed high cavitation resistance of martensitic stainless steel.
PB  - Zenica : Faculty of Mechanical Engineering
C3  - Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
T1  - ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA
T1  - ANALYSIS OF CAVITATION DAMAGE MORPHOLOGY OF MARTENSITIC STAINLESS STEEL
EP  - 176
SP  - 171
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7059
ER  - 

@conference{
author = "Dojčinović, Marina and Purić, Branka and Jezdimirović, Slađana and Kovačević, Andrej and Pavlović, Marko",
year = "2021",
abstract = "U radu je analizirana morfologija kavitacionog oštećenja martenzitnog nerđajućeg čelika. Za ispitivanje otpornosti na dejstvo kavitacije, u laboratorijskim uslovima je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćenjem promene mase uzorka u funkciji vremena dejstva kavitacije određena je kavitaciona brzina čelika, kao mera otpornosti čelika na dejstvo kavitacije. Tokom ispitivanja primenjena je skenirajuća elektronska mikroskopija (SEM) koja je omogućila analizu morfologije kavitacionog oštećenja ovog materijala. Dobijeni rezultati ispitivanja pokazali su visoku otpornost martenzitnog nerđajućeg čelika na dejstvo kavitacije., The morphology of cavitation damage of martensitic stainless steel was analyzed in this paper. Ultrasonic vibration method with a stationary sample was applied for cavitation resistance testing in laboratory conditions. By monitoring the change in the mass of the sample as a function of the time of cavitation action, the cavitation rate of steel was determined as a measure of the cavitation resistance of steel. During the examination, scanning electron microscopy (SEM) was applied, which enabled the analysis of the morphology of cavitation damage of this material. The obtained test results showed high cavitation resistance of martensitic stainless steel.",
publisher = "Zenica : Faculty of Mechanical Engineering",
journal = "Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021",
title = "ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA, ANALYSIS OF CAVITATION DAMAGE MORPHOLOGY OF MARTENSITIC STAINLESS STEEL",
pages = "176-171",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7059"
}

Dojčinović, M., Purić, B., Jezdimirović, S., Kovačević, A.,& Pavlović, M.. (2021). ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
Zenica : Faculty of Mechanical Engineering., 171-176.
https://hdl.handle.net/21.15107/rcub_technorep_7059

Dojčinović M, Purić B, Jezdimirović S, Kovačević A, Pavlović M. ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021. 2021;:171-176.
https://hdl.handle.net/21.15107/rcub_technorep_7059 .

Dojčinović, Marina, Purić, Branka, Jezdimirović, Slađana, Kovačević, Andrej, Pavlović, Marko, "ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA" in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021 (2021):171-176,
https://hdl.handle.net/21.15107/rcub_technorep_7059 .