TY  - JOUR
AU  - Smiljanić, Sonja
AU  - Grujić, Snežana
AU  - Matijašević, Srđan D.
AU  - Stojanović, Jovica
AU  - Nikolić, Jelena
AU  - Savić, Veljko
AU  - Popović, Daniela
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/13
AB  - The crystal growth rate of La(2)SrB(10)O(19)in an undercooled melt of stoichiometric composition was studied. The crystallization of the bulk samples was performed in a single-stage regime under isothermal conditions at the selected temperatures for the different time periods. The surface crystallization was observed and in all crystallized samples, the La(2)SrB(10)O(19)crystalline phase was identified. Based on the dependence of the crystalline layer thickness on treatment time at selected temperature, crystal growth rate was obtained. The crystal growth rates were from 1.65 x 10(-8)to 2.77 x 10(-7)m s(-1)in the temperature interval (700-780 degrees C). The experimental values were compared to the calculated values using theoretical model of the crystal growth. The experimental growth rate followed the same trend as the calculated growth rate, but the experimental values were higher than the calculated.
PB  - Springer, Dordrecht
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Crystal growth of la(2)srb(10)o(19)from undercooled melt
DO  - 10.1007/s10973-020-10122-1
ER  - 

@article{
author = "Smiljanić, Sonja and Grujić, Snežana and Matijašević, Srđan D. and Stojanović, Jovica and Nikolić, Jelena and Savić, Veljko and Popović, Daniela",
year = "2020",
abstract = "The crystal growth rate of La(2)SrB(10)O(19)in an undercooled melt of stoichiometric composition was studied. The crystallization of the bulk samples was performed in a single-stage regime under isothermal conditions at the selected temperatures for the different time periods. The surface crystallization was observed and in all crystallized samples, the La(2)SrB(10)O(19)crystalline phase was identified. Based on the dependence of the crystalline layer thickness on treatment time at selected temperature, crystal growth rate was obtained. The crystal growth rates were from 1.65 x 10(-8)to 2.77 x 10(-7)m s(-1)in the temperature interval (700-780 degrees C). The experimental values were compared to the calculated values using theoretical model of the crystal growth. The experimental growth rate followed the same trend as the calculated growth rate, but the experimental values were higher than the calculated.",
publisher = "Springer, Dordrecht",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Crystal growth of la(2)srb(10)o(19)from undercooled melt",
doi = "10.1007/s10973-020-10122-1"
}

Smiljanić, S., Grujić, S., Matijašević, S. D., Stojanović, J., Nikolić, J., Savić, V.,& Popović, D.. (2020). Crystal growth of la(2)srb(10)o(19)from undercooled melt. in Journal of Thermal Analysis and Calorimetry
Springer, Dordrecht..
https://doi.org/10.1007/s10973-020-10122-1

Smiljanić S, Grujić S, Matijašević SD, Stojanović J, Nikolić J, Savić V, Popović D. Crystal growth of la(2)srb(10)o(19)from undercooled melt. in Journal of Thermal Analysis and Calorimetry. 2020;.
doi:10.1007/s10973-020-10122-1 .

Smiljanić, Sonja, Grujić, Snežana, Matijašević, Srđan D., Stojanović, Jovica, Nikolić, Jelena, Savić, Veljko, Popović, Daniela, "Crystal growth of la(2)srb(10)o(19)from undercooled melt" in Journal of Thermal Analysis and Calorimetry (2020),
https://doi.org/10.1007/s10973-020-10122-1 . .

TY  - JOUR
AU  - Radojević, Vesna
AU  - Valčić, Andreja
AU  - Nikolić, S
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/426
AB  - Results presented in this paper contribute to investigation of the influence of solidification rate (R) and the initial concentration of solute (C-o) on the interface shape and the distribution of the solute. Solidification of Al-Cu alloy was performed using Vertical Bridgman method. Within the range of experimental solidification rates, the change of interface shape from planar to cellular has been observed and investigated. According to distribution of the solute, the k(e) (Cu) was calculated for each solidification rate and k(e) as a function of R was presented.
PB  - Elsevier, Amsterdam
T2  - Materials Letters
T1  - Interface shape and distribution of solute during Vertical Bridgman growth of Al-Cu alloy
EP  - 254
IS  - 4-5
SP  - 248
VL  - 52
DO  - 10.1016/S0167-577X(01)00402-5
ER  - 

@article{
author = "Radojević, Vesna and Valčić, Andreja and Nikolić, S",
year = "2002",
abstract = "Results presented in this paper contribute to investigation of the influence of solidification rate (R) and the initial concentration of solute (C-o) on the interface shape and the distribution of the solute. Solidification of Al-Cu alloy was performed using Vertical Bridgman method. Within the range of experimental solidification rates, the change of interface shape from planar to cellular has been observed and investigated. According to distribution of the solute, the k(e) (Cu) was calculated for each solidification rate and k(e) as a function of R was presented.",
publisher = "Elsevier, Amsterdam",
journal = "Materials Letters",
title = "Interface shape and distribution of solute during Vertical Bridgman growth of Al-Cu alloy",
pages = "254-248",
number = "4-5",
volume = "52",
doi = "10.1016/S0167-577X(01)00402-5"
}

Radojević, V., Valčić, A.,& Nikolić, S.. (2002). Interface shape and distribution of solute during Vertical Bridgman growth of Al-Cu alloy. in Materials Letters
Elsevier, Amsterdam., 52(4-5), 248-254.
https://doi.org/10.1016/S0167-577X(01)00402-5

Radojević V, Valčić A, Nikolić S. Interface shape and distribution of solute during Vertical Bridgman growth of Al-Cu alloy. in Materials Letters. 2002;52(4-5):248-254.
doi:10.1016/S0167-577X(01)00402-5 .

Radojević, Vesna, Valčić, Andreja, Nikolić, S, "Interface shape and distribution of solute during Vertical Bridgman growth of Al-Cu alloy" in Materials Letters, 52, no. 4-5 (2002):248-254,
https://doi.org/10.1016/S0167-577X(01)00402-5 . .