TY  - CONF
AU  - Korać, Marija
AU  - Dimitrijević, Stevan
AU  - Delijić, Kemal
AU  - Dimitrijević, Silvana
AU  - Kamberović, Željko
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6841
AB  - The presented paper investigates the influence of zinc addition on corrosion characteristics of different sterling silver alloy systems. Open circuit potential measurements, linear polarization resistance method, and potentiodynamic polarization tests were employed to determine the corrosion characteristics of the alloys. The materials were tested in an Artificial Sweat, 0.9% NaCl, and 0.01M Na2S solutions. Based on the presented results, it could be concluded that zinc has the most significant direct impact. The benefits of zinc addition are especially noticeable in aluminum-containing alloy systems, but only up to 3.7 % of Zn. The best results are achieved for alloy AgCu1.9Zn3.7Al1.6Si0.3.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
T1  - Influence of zinc addition on anti-tarnish silver alloys in four different systems
EP  - 290
SP  - 286
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6841
ER  - 

@conference{
author = "Korać, Marija and Dimitrijević, Stevan and Delijić, Kemal and Dimitrijević, Silvana and Kamberović, Željko",
year = "2023",
abstract = "The presented paper investigates the influence of zinc addition on corrosion characteristics of different sterling silver alloy systems. Open circuit potential measurements, linear polarization resistance method, and potentiodynamic polarization tests were employed to determine the corrosion characteristics of the alloys. The materials were tested in an Artificial Sweat, 0.9% NaCl, and 0.01M Na2S solutions. Based on the presented results, it could be concluded that zinc has the most significant direct impact. The benefits of zinc addition are especially noticeable in aluminum-containing alloy systems, but only up to 3.7 % of Zn. The best results are achieved for alloy AgCu1.9Zn3.7Al1.6Si0.3.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023",
title = "Influence of zinc addition on anti-tarnish silver alloys in four different systems",
pages = "290-286",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6841"
}

Korać, M., Dimitrijević, S., Delijić, K., Dimitrijević, S.,& Kamberović, Ž.. (2023). Influence of zinc addition on anti-tarnish silver alloys in four different systems. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 286-290.
https://hdl.handle.net/21.15107/rcub_technorep_6841

Korać M, Dimitrijević S, Delijić K, Dimitrijević S, Kamberović Ž. Influence of zinc addition on anti-tarnish silver alloys in four different systems. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:286-290.
https://hdl.handle.net/21.15107/rcub_technorep_6841 .

Korać, Marija, Dimitrijević, Stevan, Delijić, Kemal, Dimitrijević, Silvana, Kamberović, Željko, "Influence of zinc addition on anti-tarnish silver alloys in four different systems" in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):286-290,
https://hdl.handle.net/21.15107/rcub_technorep_6841 .

TY  - CONF
AU  - Dimitrijević, Silvana
AU  - Dimitrijević, Stevan
AU  - Ivanović, Aleksandra
AU  - Korać, Marija
AU  - Ranitović, Milisav
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6732
AB  - Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials is a very challenging process, especially if the sources for recycling are numerous materials that contain different impurities. In this study, recycled alloys were produced by melting of aluminum scrap with the addition of the required components. This paper aims to compare two commercial Al alloys with their analogs from the recycling process. Both of the alloys belong to the aluminum series 6000, with designations 6060 and 6082. The results of comparing corrosion and physical characteristics are presented in this study. Physical characterization was performed by measuring the alloys' hardness and electrical conductivity. The electrochemical investigation used several corrosion methods, OCP (open circuit potential), measuring polarization curves in apparent Tafel region with extrapolation of results, and LRP (linear polarization resistance). The corrosion environment was acidulated 0.5M Na2SO4 with pH=2.5. The received results have confirmed insignificant differences between the properties of the commercial and alloys produced by the recycling. Recycled alloys have achieved almost identical mechanical properties and even slightly better corrosion characteristics, which was the consequence of the lower concentration of impurities in recycled alloys or higher concentration of microalloying components.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
T1  - Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys
EP  - 275
SP  - 269
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6732
ER  - 

@conference{
author = "Dimitrijević, Silvana and Dimitrijević, Stevan and Ivanović, Aleksandra and Korać, Marija and Ranitović, Milisav",
year = "2023",
abstract = "Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials is a very challenging process, especially if the sources for recycling are numerous materials that contain different impurities. In this study, recycled alloys were produced by melting of aluminum scrap with the addition of the required components. This paper aims to compare two commercial Al alloys with their analogs from the recycling process. Both of the alloys belong to the aluminum series 6000, with designations 6060 and 6082. The results of comparing corrosion and physical characteristics are presented in this study. Physical characterization was performed by measuring the alloys' hardness and electrical conductivity. The electrochemical investigation used several corrosion methods, OCP (open circuit potential), measuring polarization curves in apparent Tafel region with extrapolation of results, and LRP (linear polarization resistance). The corrosion environment was acidulated 0.5M Na2SO4 with pH=2.5. The received results have confirmed insignificant differences between the properties of the commercial and alloys produced by the recycling. Recycled alloys have achieved almost identical mechanical properties and even slightly better corrosion characteristics, which was the consequence of the lower concentration of impurities in recycled alloys or higher concentration of microalloying components.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023",
title = "Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys",
pages = "275-269",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6732"
}

Dimitrijević, S., Dimitrijević, S., Ivanović, A., Korać, M.,& Ranitović, M.. (2023). Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 269-275.
https://hdl.handle.net/21.15107/rcub_technorep_6732

Dimitrijević S, Dimitrijević S, Ivanović A, Korać M, Ranitović M. Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:269-275.
https://hdl.handle.net/21.15107/rcub_technorep_6732 .

Dimitrijević, Silvana, Dimitrijević, Stevan, Ivanović, Aleksandra, Korać, Marija, Ranitović, Milisav, "Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys" in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):269-275,
https://hdl.handle.net/21.15107/rcub_technorep_6732 .

TY  - JOUR
AU  - Manojlović, Vaso
AU  - Kamberović, Željko
AU  - Korać, Marija
AU  - Dotlić, Milan
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5334
AB  - The electric arc furnace has been the subject of extensive research due to its complex and chaotic nature. Machine learning methods provide a powerful forensic examination of industrial processes as they exclude numerous assumptions and involve irregularities present in industrial conditions. In this study, different machine learning and data processing methods were used to evaluate the energy efficiency parameters of the electric arc furnace process. The dataset was collected over five years, in a steelmaking factory, with 42 features. This data was split into training and test sets, which were used for training and evaluation, respectively. With extensive data management, the data quality and machine learning model performance were improved. It was found that selected models display similar performance, yet the artificial neural network shows greater flexibility when changing targets. The results indicate that a data-centric rather than model-centric approach is better for improving model performance. Using the partial dependence plot and SHAP method, insight was gained into each parameter's correlation with the target. It was found that the amount of hot heel (melted steel left in the furnace, to be re-heated) was the main factor disturbing the data quality and model performance. It was also demonstrated that data for total oxygen consumption should be divided from the oxygen used into refining and natural gas. This highly improves model performance. Employing a data-centric machine learning model to control and optimize main process parameters (with a small capital investment) leads to lower energy consumption for industrial processes.
PB  - Elsevier Ltd.
T2  - Applied Energy
T1  - Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters
SP  - 118209
VL  - 307
DO  - 10.1016/j.apenergy.2021.118209
ER  - 

@article{
author = "Manojlović, Vaso and Kamberović, Željko and Korać, Marija and Dotlić, Milan",
year = "2022",
abstract = "The electric arc furnace has been the subject of extensive research due to its complex and chaotic nature. Machine learning methods provide a powerful forensic examination of industrial processes as they exclude numerous assumptions and involve irregularities present in industrial conditions. In this study, different machine learning and data processing methods were used to evaluate the energy efficiency parameters of the electric arc furnace process. The dataset was collected over five years, in a steelmaking factory, with 42 features. This data was split into training and test sets, which were used for training and evaluation, respectively. With extensive data management, the data quality and machine learning model performance were improved. It was found that selected models display similar performance, yet the artificial neural network shows greater flexibility when changing targets. The results indicate that a data-centric rather than model-centric approach is better for improving model performance. Using the partial dependence plot and SHAP method, insight was gained into each parameter's correlation with the target. It was found that the amount of hot heel (melted steel left in the furnace, to be re-heated) was the main factor disturbing the data quality and model performance. It was also demonstrated that data for total oxygen consumption should be divided from the oxygen used into refining and natural gas. This highly improves model performance. Employing a data-centric machine learning model to control and optimize main process parameters (with a small capital investment) leads to lower energy consumption for industrial processes.",
publisher = "Elsevier Ltd.",
journal = "Applied Energy",
title = "Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters",
pages = "118209",
volume = "307",
doi = "10.1016/j.apenergy.2021.118209"
}

Manojlović, V., Kamberović, Ž., Korać, M.,& Dotlić, M.. (2022). Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters. in Applied Energy
Elsevier Ltd.., 307, 118209.
https://doi.org/10.1016/j.apenergy.2021.118209

Manojlović V, Kamberović Ž, Korać M, Dotlić M. Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters. in Applied Energy. 2022;307:118209.
doi:10.1016/j.apenergy.2021.118209 .

Manojlović, Vaso, Kamberović, Željko, Korać, Marija, Dotlić, Milan, "Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters" in Applied Energy, 307 (2022):118209,
https://doi.org/10.1016/j.apenergy.2021.118209 . .

Dimitrijević, S., Kamberović, Ž., Ranitović, M., Korać, M.,& Dimitrijević, S.. (2022). Poboljšanje karakteristika srebrnog praha mikrometarske veličine i optimizacija troškova proizvodnje u proizvodnom pogonu Chimet S.p.A.. in Tehnološko-metalurški fakultet
Univerzitet u Beogradu, Tehnološko-metalurški fakultet..
https://hdl.handle.net/21.15107/rcub_technorep_6647

Dimitrijević S, Kamberović Ž, Ranitović M, Korać M, Dimitrijević S. Poboljšanje karakteristika srebrnog praha mikrometarske veličine i optimizacija troškova proizvodnje u proizvodnom pogonu Chimet S.p.A.. in Tehnološko-metalurški fakultet. 2022;.
https://hdl.handle.net/21.15107/rcub_technorep_6647 .

Dimitrijević, Stevan, Kamberović, Željko, Ranitović, Milisav, Korać, Marija, Dimitrijević, Silvana, "Poboljšanje karakteristika srebrnog praha mikrometarske veličine i optimizacija troškova proizvodnje u proizvodnom pogonu Chimet S.p.A." in Tehnološko-metalurški fakultet (2022),
https://hdl.handle.net/21.15107/rcub_technorep_6647 .

TY  - JOUR
AU  - Kamberović, Željko
AU  - Gajić, Nataša
AU  - Korać, Marija
AU  - Jevtić, Sanja
AU  - Sokić, Miroslav
AU  - Stojanovic, Jovica
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4900
AB  - By-products from zinc hydrometallurgy are classified as hazardous waste with strong leaching toxicities. Even though numerous research papers are dedicated to valorizing valuable metals in it, the primary management route is still disposal or partial reuse, such as the Waelz process. Presented experimental research investigates possibilities of sulfidization and further processing as a technologically sustainable route for valuable metals valorization from non-standard jarosite-PbAg sludge. The comprehensive thermodynamic analysis was done by HSC Chemistry(R), through optimizing process parameters, i.e., temperature, sulfur addition, and selection of possible additives. Technological possibility of magnetic separation, flotation, and smelting of sulfidized material was also investigated; the results were below the values that allow practical application, due to the obtained texture of sulfidized jarosite, which does not allow the liberation of minerals. Smelting tests were performed on sulfidized jarosite with sulfur and without and with carbon as additive. By smelting sulfidized jarosite-PbAg sludge with added carbon in sulfidization stage at 1375 degrees C, obtained products were matte, slag, raw lead, and dust in which base, critical, and slag forming components were valorized. Valuable metals were concentrated in smelting products so as to enable further processing, which also could be interesting in the case of treatment of complex, polymetallic, and refractory primary materials, which represent a significant contribution to the circular economy.
T2  - Minerals
T1  - Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge
IS  - 3
VL  - 11
DO  - 10.3390/min11030255
ER  - 

@article{
author = "Kamberović, Željko and Gajić, Nataša and Korać, Marija and Jevtić, Sanja and Sokić, Miroslav and Stojanovic, Jovica",
year = "2021",
abstract = "By-products from zinc hydrometallurgy are classified as hazardous waste with strong leaching toxicities. Even though numerous research papers are dedicated to valorizing valuable metals in it, the primary management route is still disposal or partial reuse, such as the Waelz process. Presented experimental research investigates possibilities of sulfidization and further processing as a technologically sustainable route for valuable metals valorization from non-standard jarosite-PbAg sludge. The comprehensive thermodynamic analysis was done by HSC Chemistry(R), through optimizing process parameters, i.e., temperature, sulfur addition, and selection of possible additives. Technological possibility of magnetic separation, flotation, and smelting of sulfidized material was also investigated; the results were below the values that allow practical application, due to the obtained texture of sulfidized jarosite, which does not allow the liberation of minerals. Smelting tests were performed on sulfidized jarosite with sulfur and without and with carbon as additive. By smelting sulfidized jarosite-PbAg sludge with added carbon in sulfidization stage at 1375 degrees C, obtained products were matte, slag, raw lead, and dust in which base, critical, and slag forming components were valorized. Valuable metals were concentrated in smelting products so as to enable further processing, which also could be interesting in the case of treatment of complex, polymetallic, and refractory primary materials, which represent a significant contribution to the circular economy.",
journal = "Minerals",
title = "Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge",
number = "3",
volume = "11",
doi = "10.3390/min11030255"
}

Kamberović, Ž., Gajić, N., Korać, M., Jevtić, S., Sokić, M.,& Stojanovic, J.. (2021). Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge. in Minerals, 11(3).
https://doi.org/10.3390/min11030255

Kamberović Ž, Gajić N, Korać M, Jevtić S, Sokić M, Stojanovic J. Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge. in Minerals. 2021;11(3).
doi:10.3390/min11030255 .

Kamberović, Željko, Gajić, Nataša, Korać, Marija, Jevtić, Sanja, Sokić, Miroslav, Stojanovic, Jovica, "Technologically Sustainable Route for Metals Valorization from Jarosite-PbAg Sludge" in Minerals, 11, no. 3 (2021),
https://doi.org/10.3390/min11030255 . .

TY  - JOUR
AU  - Korać, Marija
AU  - Kamberović, Željko
AU  - Anđić, Zoran
AU  - Stopić, Srećko
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4518
AB  - This paper presents thermochemical synthesis of copper/alumina nanocomposites in a Cu-Al(2)O(3)system with 1-2.5 wt.% of alumina and their characterization, which included: transmission electron microscopy: focused ion beam (FIB), analytical electron microscopy (AEM) and high resolution transmission electron microscopy (HRTEM). Thermodynamic analysis was used to study the formation mechanism of desirable products during drying, thermal decomposition and reduction processes. Upon synthesis of powders, samples were cold pressed (2 GPa) in tools dimension 8 x 32 x 2 mm and sintered at temperatures within the range 800-1000 degrees C for 15 to 120 min in a hydrogen atmosphere. Results of characterization showed that dispersion-strengthened compacts could be produced by sintering of thermo-chemically prepared Cu-Al(2)O(3)powders with properties suitable for material application, such as a contact material exhibiting high strength and high electrical conductivity at the same time. Additional research was carried out in order to analyze the application of the obtained nanocomposite powders for the synthesis of copper/alumina nanocomposites by a new method, which is a combination of a thermochemical procedure and mechanical alloying. The measured values of an electric conductivity and hardness were compared with ones in literature, confirming an advantage of the proposed combined strategy.
PB  - MDPI, Basel
T2  - Metals
T1  - Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites
IS  - 6
VL  - 10
DO  - 10.3390/met10060719
ER  - 

@article{
author = "Korać, Marija and Kamberović, Željko and Anđić, Zoran and Stopić, Srećko",
year = "2020",
abstract = "This paper presents thermochemical synthesis of copper/alumina nanocomposites in a Cu-Al(2)O(3)system with 1-2.5 wt.% of alumina and their characterization, which included: transmission electron microscopy: focused ion beam (FIB), analytical electron microscopy (AEM) and high resolution transmission electron microscopy (HRTEM). Thermodynamic analysis was used to study the formation mechanism of desirable products during drying, thermal decomposition and reduction processes. Upon synthesis of powders, samples were cold pressed (2 GPa) in tools dimension 8 x 32 x 2 mm and sintered at temperatures within the range 800-1000 degrees C for 15 to 120 min in a hydrogen atmosphere. Results of characterization showed that dispersion-strengthened compacts could be produced by sintering of thermo-chemically prepared Cu-Al(2)O(3)powders with properties suitable for material application, such as a contact material exhibiting high strength and high electrical conductivity at the same time. Additional research was carried out in order to analyze the application of the obtained nanocomposite powders for the synthesis of copper/alumina nanocomposites by a new method, which is a combination of a thermochemical procedure and mechanical alloying. The measured values of an electric conductivity and hardness were compared with ones in literature, confirming an advantage of the proposed combined strategy.",
publisher = "MDPI, Basel",
journal = "Metals",
title = "Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites",
number = "6",
volume = "10",
doi = "10.3390/met10060719"
}

Korać, M., Kamberović, Ž., Anđić, Z.,& Stopić, S.. (2020). Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites. in Metals
MDPI, Basel., 10(6).
https://doi.org/10.3390/met10060719

Korać M, Kamberović Ž, Anđić Z, Stopić S. Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites. in Metals. 2020;10(6).
doi:10.3390/met10060719 .

Korać, Marija, Kamberović, Željko, Anđić, Zoran, Stopić, Srećko, "Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites" in Metals, 10, no. 6 (2020),
https://doi.org/10.3390/met10060719 . .

TY  - JOUR
AU  - Ranitović, Milisav
AU  - Kamberović, Željko
AU  - Korać, Marija
AU  - Radovanović, Dragana
AU  - Sokić, Miroslav
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4548
AB  - High flexibility of hydrometallurgical operations as well as economic and environmental acceptability, offer the opportunity to selectively obtain metals in the early stages of the processing. This enables the application of hydrometallurgical operations in processing of ores which, due to their complex composition or low copper content, are not suitable for pyrometallurgical treatment. In contrast to sulfide minerals, leaching of oxide ores does not requires presence of oxidizing agent. This paper presents the results of influence of temperature on the leaching degree of copper from pyritechalcopyrite concentrate by sulfuric acid solution at atmospheric pressure. According to the obtained results, it was found that an increase in the leaching temperature significantly contributes to the increase in the leaching efficiency, where after 6 hours of leaching at 40°C achieved efficiency was 90.6%.
AB  - Visoka fleksibilnost, ekonomičnost i ekološka prihvatljivost hidrometalurških operacija nude mogućnost za selektivno dobijanje metala u ranim fazama tehnološkog procesa. To omogućava primenu hidrometalurških operacija u preradi ruda koje, zbog kompleksnog sastava ili niskog sadržaja metala, nisu pogodne za pirometalurški tretman. Nasuprot sulfidnim mineralima, za luženje oksidnih ruda nije potrebno prisustvo oksidansa. U ovom radu prikazani su rezultati ispitivanja uticaja temperature na stepen izluženja bakra iz piritno-halkopiritnog koncentrata rastvorom sumporne kiseline pri atmosferskom pritisku. Na osnovu dobijenih rezultata utvrđeno je da povećanje temperature luženja značajno doprinosi povećanju efikasnosti izluženja pri čemu nakon 6 sati luženja na 40°C postignuta efikasnost je iznosila 90,6%.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid
T1  - Atmosfersko luženje bakra iz oksidno-sulfidne rude rastvorom sumporne kiseline
EP  - 175
IS  - 2
SP  - 172
VL  - 75
DO  - 10.5937/tehnika2002172R
ER  - 

@article{
author = "Ranitović, Milisav and Kamberović, Željko and Korać, Marija and Radovanović, Dragana and Sokić, Miroslav",
year = "2020",
abstract = "High flexibility of hydrometallurgical operations as well as economic and environmental acceptability, offer the opportunity to selectively obtain metals in the early stages of the processing. This enables the application of hydrometallurgical operations in processing of ores which, due to their complex composition or low copper content, are not suitable for pyrometallurgical treatment. In contrast to sulfide minerals, leaching of oxide ores does not requires presence of oxidizing agent. This paper presents the results of influence of temperature on the leaching degree of copper from pyritechalcopyrite concentrate by sulfuric acid solution at atmospheric pressure. According to the obtained results, it was found that an increase in the leaching temperature significantly contributes to the increase in the leaching efficiency, where after 6 hours of leaching at 40°C achieved efficiency was 90.6%., Visoka fleksibilnost, ekonomičnost i ekološka prihvatljivost hidrometalurških operacija nude mogućnost za selektivno dobijanje metala u ranim fazama tehnološkog procesa. To omogućava primenu hidrometalurških operacija u preradi ruda koje, zbog kompleksnog sastava ili niskog sadržaja metala, nisu pogodne za pirometalurški tretman. Nasuprot sulfidnim mineralima, za luženje oksidnih ruda nije potrebno prisustvo oksidansa. U ovom radu prikazani su rezultati ispitivanja uticaja temperature na stepen izluženja bakra iz piritno-halkopiritnog koncentrata rastvorom sumporne kiseline pri atmosferskom pritisku. Na osnovu dobijenih rezultata utvrđeno je da povećanje temperature luženja značajno doprinosi povećanju efikasnosti izluženja pri čemu nakon 6 sati luženja na 40°C postignuta efikasnost je iznosila 90,6%.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid, Atmosfersko luženje bakra iz oksidno-sulfidne rude rastvorom sumporne kiseline",
pages = "175-172",
number = "2",
volume = "75",
doi = "10.5937/tehnika2002172R"
}

Ranitović, M., Kamberović, Ž., Korać, M., Radovanović, D.,& Sokić, M.. (2020). Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 75(2), 172-175.
https://doi.org/10.5937/tehnika2002172R

Ranitović M, Kamberović Ž, Korać M, Radovanović D, Sokić M. Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid. in Tehnika. 2020;75(2):172-175.
doi:10.5937/tehnika2002172R .

Ranitović, Milisav, Kamberović, Željko, Korać, Marija, Radovanović, Dragana, Sokić, Miroslav, "Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid" in Tehnika, 75, no. 2 (2020):172-175,
https://doi.org/10.5937/tehnika2002172R . .

TY  - CONF
AU  - Dimitrijević, Stevan
AU  - Kamberović, Željko
AU  - Stevanović, Dimitrije
AU  - Dimitrijević, Silvana
AU  - Korać, Marija
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6851
AB  - The results of experimental studies of the effect of the plasma sprayed alumina coating on the improved corrosion resistance of the heat-resistant ferritic
stainless steel (W.Nr. 1.4713, EN X10CrAlSi7) in the sulfuric acid are presented in
this research. In this investigation, the plasma spray process was employed on the
substrate of ferritic stainless steel with deposition of Al2O3 ceramic coatings with Ni5%Al as a bond layer. Two different coating thicknesses of 0.3 mm and 0.5 mm
were tested. The investigation was performed by electrochemical characterization
and weight loss method. Electrochemical characterization of corrosion behavior of
steel with and without ceramic coating was performed by: the open circuit potential
measurement (OCP), the linear polarization resistance (LRP) method, and the
Tafel extrapolation method. All electrochemical measurements were performed in
the sulfuric acid with a concentration of 0.25 mol/dm3
(pH  1.00). Weight loss
method was performed with a duration of 240 h in the 38 wt.% sulfuric acid. Corrosion current densities obtained by electrochemical methods with the coatings were
between 3 and 4 % of the values of the samples without coatings. Nearly the same
results were obtained with the weight loss method. In both cases, these values are
similar to the porosity of the coatings.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia
T1  - Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid
SP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6851
ER  - 

@conference{
author = "Dimitrijević, Stevan and Kamberović, Željko and Stevanović, Dimitrije and Dimitrijević, Silvana and Korać, Marija",
year = "2019",
abstract = "The results of experimental studies of the effect of the plasma sprayed alumina coating on the improved corrosion resistance of the heat-resistant ferritic
stainless steel (W.Nr. 1.4713, EN X10CrAlSi7) in the sulfuric acid are presented in
this research. In this investigation, the plasma spray process was employed on the
substrate of ferritic stainless steel with deposition of Al2O3 ceramic coatings with Ni5%Al as a bond layer. Two different coating thicknesses of 0.3 mm and 0.5 mm
were tested. The investigation was performed by electrochemical characterization
and weight loss method. Electrochemical characterization of corrosion behavior of
steel with and without ceramic coating was performed by: the open circuit potential
measurement (OCP), the linear polarization resistance (LRP) method, and the
Tafel extrapolation method. All electrochemical measurements were performed in
the sulfuric acid with a concentration of 0.25 mol/dm3
(pH  1.00). Weight loss
method was performed with a duration of 240 h in the 38 wt.% sulfuric acid. Corrosion current densities obtained by electrochemical methods with the coatings were
between 3 and 4 % of the values of the samples without coatings. Nearly the same
results were obtained with the weight loss method. In both cases, these values are
similar to the porosity of the coatings.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia",
title = "Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid",
pages = "54",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6851"
}

Dimitrijević, S., Kamberović, Ž., Stevanović, D., Dimitrijević, S.,& Korać, M.. (2019). Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid. in Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 54.
https://hdl.handle.net/21.15107/rcub_technorep_6851

Dimitrijević S, Kamberović Ž, Stevanović D, Dimitrijević S, Korać M. Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid. in Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia. 2019;:54.
https://hdl.handle.net/21.15107/rcub_technorep_6851 .

Dimitrijević, Stevan, Kamberović, Željko, Stevanović, Dimitrije, Dimitrijević, Silvana, Korać, Marija, "Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid" in Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia (2019):54,
https://hdl.handle.net/21.15107/rcub_technorep_6851 .

TY  - JOUR
AU  - Ranitović, Milisav
AU  - Đokić, Jovana
AU  - Korać, Marija
AU  - Gajić, Nataša
AU  - Dimitrijević, Stevan
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4077
AB  - This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed circuit boards (WPCBs). Experimental work included physical and chemical characterization, thermodynamic analysis, and pyrometallurgical tests corresponding to secondary lead, copper, and steel metallurgy. Technology metals recyclability and recovery potential were evaluated with respect to their distribution between metal and slag phase (difficult for recovering) versus the dust phase (easy for recovering). According to obtained results, it was determined that high-temperature processing of magnetic fraction in the electric arc furnace promotes volatilization of the TM and their pre-concentration in the filter as a dust product from which they could be valorized using further hydrometallurgical methods.
PB  - Association of Metallurgical Engineers of Serbia
T2  - Metallurgical and Materials Engineering
T1  - Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction
EP  - 194
IS  - 3
SP  - 183
VL  - 25
DO  - 10.30544/446
ER  - 

@article{
author = "Ranitović, Milisav and Đokić, Jovana and Korać, Marija and Gajić, Nataša and Dimitrijević, Stevan",
year = "2019",
abstract = "This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed circuit boards (WPCBs). Experimental work included physical and chemical characterization, thermodynamic analysis, and pyrometallurgical tests corresponding to secondary lead, copper, and steel metallurgy. Technology metals recyclability and recovery potential were evaluated with respect to their distribution between metal and slag phase (difficult for recovering) versus the dust phase (easy for recovering). According to obtained results, it was determined that high-temperature processing of magnetic fraction in the electric arc furnace promotes volatilization of the TM and their pre-concentration in the filter as a dust product from which they could be valorized using further hydrometallurgical methods.",
publisher = "Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical and Materials Engineering",
title = "Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction",
pages = "194-183",
number = "3",
volume = "25",
doi = "10.30544/446"
}

Ranitović, M., Đokić, J., Korać, M., Gajić, N.,& Dimitrijević, S.. (2019). Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction. in Metallurgical and Materials Engineering
Association of Metallurgical Engineers of Serbia., 25(3), 183-194.
https://doi.org/10.30544/446

Ranitović M, Đokić J, Korać M, Gajić N, Dimitrijević S. Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction. in Metallurgical and Materials Engineering. 2019;25(3):183-194.
doi:10.30544/446 .

Ranitović, Milisav, Đokić, Jovana, Korać, Marija, Gajić, Nataša, Dimitrijević, Stevan, "Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction" in Metallurgical and Materials Engineering, 25, no. 3 (2019):183-194,
https://doi.org/10.30544/446 . .

TY  - JOUR
AU  - Štulović, Marija
AU  - Radovanović, Dragana
AU  - Kamberović, Željko
AU  - Korać, Marija
AU  - Anđić, Zoran
AU  - Ranitović, Milisav
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4096
AB  - Secondary alkaline lead slag (SALS), generated during lead-acid batteries recycling, is a hazardous waste due to its high reactivity, solubility, and migration of toxic elements. After pulverization caused by storage under atmospheric condition for 30 days, the SALS was sieved and coarse fraction (+1 mm) was returned to the recycling process. Finer fraction (-1 mm) was treated by water leaching to remove soluble compounds. SALS compositions prior and after the pre-treatment and effects of liquid-to-solid ratio, stirring rate, and temperature on Na, S, Fe, As, and Pb leaching from SALS were analyzed. The results show that maximal leaching degrees were 95.78%, 75.32%, and 79.89% for Na, S, and As, respectively (20 l kg(-1), 600 min(-1), 333 K, 120 min). Leachability of Na and S from SALS was controlled by dissolution of Na2SO4 that could be recovered from leaching solution. Isothermal As leaching is described by diffusion mechanism with activation energy of 15.5 kJ mol(-1). Insoluble Pb and Fe sulfates, sulfides, and oxides remained in the SALS. Pre-treated SALS, with reduced mass up to 32%, was solidified in cement matrix. The results of toxicity characteristic leaching procedure and unconfined compressive strength confirmed effectiveness of As removal from SALS by water leaching and Pb immobilization in cement matrix containing 20% of SALS.
PB  - Springer, New York
T2  - Journal of Material Cycles and Waste Management
T1  - Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products
EP  - 1413
IS  - 6
SP  - 1402
VL  - 21
DO  - 10.1007/s10163-019-00892-8
ER  - 

@article{
author = "Štulović, Marija and Radovanović, Dragana and Kamberović, Željko and Korać, Marija and Anđić, Zoran and Ranitović, Milisav",
year = "2019",
abstract = "Secondary alkaline lead slag (SALS), generated during lead-acid batteries recycling, is a hazardous waste due to its high reactivity, solubility, and migration of toxic elements. After pulverization caused by storage under atmospheric condition for 30 days, the SALS was sieved and coarse fraction (+1 mm) was returned to the recycling process. Finer fraction (-1 mm) was treated by water leaching to remove soluble compounds. SALS compositions prior and after the pre-treatment and effects of liquid-to-solid ratio, stirring rate, and temperature on Na, S, Fe, As, and Pb leaching from SALS were analyzed. The results show that maximal leaching degrees were 95.78%, 75.32%, and 79.89% for Na, S, and As, respectively (20 l kg(-1), 600 min(-1), 333 K, 120 min). Leachability of Na and S from SALS was controlled by dissolution of Na2SO4 that could be recovered from leaching solution. Isothermal As leaching is described by diffusion mechanism with activation energy of 15.5 kJ mol(-1). Insoluble Pb and Fe sulfates, sulfides, and oxides remained in the SALS. Pre-treated SALS, with reduced mass up to 32%, was solidified in cement matrix. The results of toxicity characteristic leaching procedure and unconfined compressive strength confirmed effectiveness of As removal from SALS by water leaching and Pb immobilization in cement matrix containing 20% of SALS.",
publisher = "Springer, New York",
journal = "Journal of Material Cycles and Waste Management",
title = "Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products",
pages = "1413-1402",
number = "6",
volume = "21",
doi = "10.1007/s10163-019-00892-8"
}

Štulović, M., Radovanović, D., Kamberović, Ž., Korać, M., Anđić, Z.,& Ranitović, M.. (2019). Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products. in Journal of Material Cycles and Waste Management
Springer, New York., 21(6), 1402-1413.
https://doi.org/10.1007/s10163-019-00892-8

Štulović M, Radovanović D, Kamberović Ž, Korać M, Anđić Z, Ranitović M. Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products. in Journal of Material Cycles and Waste Management. 2019;21(6):1402-1413.
doi:10.1007/s10163-019-00892-8 .

Štulović, Marija, Radovanović, Dragana, Kamberović, Željko, Korać, Marija, Anđić, Zoran, Ranitović, Milisav, "Leaching of toxic elements from secondary alkaline lead slag and stabilized/solidified products" in Journal of Material Cycles and Waste Management, 21, no. 6 (2019):1402-1413,
https://doi.org/10.1007/s10163-019-00892-8 . .

TY  - JOUR
AU  - Štulović, Marija
AU  - Radovanović, Dragana
AU  - Kamberović, Željko
AU  - Korać, Marija
AU  - Anđić, Zoran
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4240
AB  - Reuse of waste is one of the main principles of sustainable development and circular economy. Secondary alkaline lead slag is a hazardous waste generated in the recycling process of lead-acid batteries that may be suitable in construction materials. The environmental impact of the use of lead slag as a partial replacement of fine aggregates in the cement-based stabilization/solidification (S/S) process for the preparation of concrete was studied in this paper. Solidified products containing 10%, 15%, 20%, and 25% slag were laboratory tested by unconfined compressive strength (UCS) analyses and the Toxicity Characteristic Leaching Procedure (TCLP). At the same time, the leachability of toxic elements from solidified products with a high percent of slag was evaluated under environmental conditions for during one year. The results of the UCS and TCLP indicated that utilization of this type of slag in cement-based applications may be justified with its controlled addition. However, the described application of the slag was disputed due to the high release of As under high alkaline environmental conditions. Eh-pH analyses and the geochemical modeling using the software PHREEQC were evaluated, as well as the mechanism of pollutant (Pb, As) immobilization (precipitation, adsorption) as a function of pH conditions.
PB  - MDPI, Basel
T2  - International Journal of Environmental Research and Public Health
T1  - Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag
IS  - 11
VL  - 16
DO  - 10.3390/ijerph16112005
ER  - 

@article{
author = "Štulović, Marija and Radovanović, Dragana and Kamberović, Željko and Korać, Marija and Anđić, Zoran",
year = "2019",
abstract = "Reuse of waste is one of the main principles of sustainable development and circular economy. Secondary alkaline lead slag is a hazardous waste generated in the recycling process of lead-acid batteries that may be suitable in construction materials. The environmental impact of the use of lead slag as a partial replacement of fine aggregates in the cement-based stabilization/solidification (S/S) process for the preparation of concrete was studied in this paper. Solidified products containing 10%, 15%, 20%, and 25% slag were laboratory tested by unconfined compressive strength (UCS) analyses and the Toxicity Characteristic Leaching Procedure (TCLP). At the same time, the leachability of toxic elements from solidified products with a high percent of slag was evaluated under environmental conditions for during one year. The results of the UCS and TCLP indicated that utilization of this type of slag in cement-based applications may be justified with its controlled addition. However, the described application of the slag was disputed due to the high release of As under high alkaline environmental conditions. Eh-pH analyses and the geochemical modeling using the software PHREEQC were evaluated, as well as the mechanism of pollutant (Pb, As) immobilization (precipitation, adsorption) as a function of pH conditions.",
publisher = "MDPI, Basel",
journal = "International Journal of Environmental Research and Public Health",
title = "Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag",
number = "11",
volume = "16",
doi = "10.3390/ijerph16112005"
}

Štulović, M., Radovanović, D., Kamberović, Ž., Korać, M.,& Anđić, Z.. (2019). Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag. in International Journal of Environmental Research and Public Health
MDPI, Basel., 16(11).
https://doi.org/10.3390/ijerph16112005

Štulović M, Radovanović D, Kamberović Ž, Korać M, Anđić Z. Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag. in International Journal of Environmental Research and Public Health. 2019;16(11).
doi:10.3390/ijerph16112005 .

Štulović, Marija, Radovanović, Dragana, Kamberović, Željko, Korać, Marija, Anđić, Zoran, "Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag" in International Journal of Environmental Research and Public Health, 16, no. 11 (2019),
https://doi.org/10.3390/ijerph16112005 . .

TY  - JOUR
AU  - Gajić, Nataša
AU  - Kamberović, Željko
AU  - Anđić, Zoran
AU  - Trpčevská, Jarmila
AU  - Plešingerova, Beatrice
AU  - Korać, Marija
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4247
AB  - This paper describes the synthesis of tungsten disulfide (WS2) powder by the sulfurization of tungsten trioxide (WO3) particles in the presence of additive potassium carbonate (K2CO3) in nitrogen (N-2) atmosphere, first at lower temperature (200 degrees C) and followed by reduction at higher temperature (900 degrees C). In addition, the ultrasonic spray pyrolysis of ammonium meta-tungstate hydrate (AMT) was used for the production of WO3 particles at 650 degrees C in air. The HSC ChemistryA (R) software package 9.0 was used for the analysis of chemistry and thermodynamic parameters of the processes for WS2 powder synthesis. The crystalline structure and phase composition of all synthesized powders were analyzed by X-ray diffraction (XRD) measurements. The morphology and chemical composition of these samples were examined by scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX).
PB  - MDPI, Basel
T2  - Metals
T1  - Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP)
IS  - 3
VL  - 9
DO  - 10.3390/met9030277
ER  - 

@article{
author = "Gajić, Nataša and Kamberović, Željko and Anđić, Zoran and Trpčevská, Jarmila and Plešingerova, Beatrice and Korać, Marija",
year = "2019",
abstract = "This paper describes the synthesis of tungsten disulfide (WS2) powder by the sulfurization of tungsten trioxide (WO3) particles in the presence of additive potassium carbonate (K2CO3) in nitrogen (N-2) atmosphere, first at lower temperature (200 degrees C) and followed by reduction at higher temperature (900 degrees C). In addition, the ultrasonic spray pyrolysis of ammonium meta-tungstate hydrate (AMT) was used for the production of WO3 particles at 650 degrees C in air. The HSC ChemistryA (R) software package 9.0 was used for the analysis of chemistry and thermodynamic parameters of the processes for WS2 powder synthesis. The crystalline structure and phase composition of all synthesized powders were analyzed by X-ray diffraction (XRD) measurements. The morphology and chemical composition of these samples were examined by scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX).",
publisher = "MDPI, Basel",
journal = "Metals",
title = "Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP)",
number = "3",
volume = "9",
doi = "10.3390/met9030277"
}

Gajić, N., Kamberović, Ž., Anđić, Z., Trpčevská, J., Plešingerova, B.,& Korać, M.. (2019). Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP). in Metals
MDPI, Basel., 9(3).
https://doi.org/10.3390/met9030277

Gajić N, Kamberović Ž, Anđić Z, Trpčevská J, Plešingerova B, Korać M. Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP). in Metals. 2019;9(3).
doi:10.3390/met9030277 .

Gajić, Nataša, Kamberović, Željko, Anđić, Zoran, Trpčevská, Jarmila, Plešingerova, Beatrice, Korać, Marija, "Synthesis of Tribological WS2 Powder from WO3 Prepared by Ultrasonic Spray Pyrolysis (USP)" in Metals, 9, no. 3 (2019),
https://doi.org/10.3390/met9030277 . .

TY  - JOUR
AU  - Gajić, Nataša
AU  - Kamberović, Željko
AU  - Anđić, Zoran
AU  - Korać, Marija
AU  - Trpčevská, Jarmila
AU  - Stamatović, Mirko
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4256
AB  - The aim of this research was to study the effect of graphite addition in the process of synthesis of tribological materials based on tin sulphides. The tin sulphides powders were synthesized from selected precursors by pyrometallurgical method in rotary tilting tube furnace. The thermodynamic parameters of the synthesis were determined using HSC Chemistry software modelling package. In addition, the synthesis process was also characterized by the thermal analysis method: simultaneous differential scanning calorimetry and thermogravimetry (DCS-TGA). The characterization of the synthesized tin sulphides powders included analysis of chemical composition by optical emission spectroscopy, phase composition identification by X-ray diffraction (XRD) and examination of morphology, as well as elemental composition by scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS). The hexagonal SnS2 and orthorhombic Sn2S3 phases were formed after the thermal treatment of starting powders in nitrogen atmosphere. The obtained results indicate the positive effects of the graphite addition which enables the synthesis of tin sulphide powders with appropriate content of sulphide phases with minimal loss of sulphur.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive
EP  - 433
IS  - 4
SP  - 423
VL  - 84
DO  - 10.2298/JSC180628102G
ER  - 

@article{
author = "Gajić, Nataša and Kamberović, Željko and Anđić, Zoran and Korać, Marija and Trpčevská, Jarmila and Stamatović, Mirko",
year = "2019",
abstract = "The aim of this research was to study the effect of graphite addition in the process of synthesis of tribological materials based on tin sulphides. The tin sulphides powders were synthesized from selected precursors by pyrometallurgical method in rotary tilting tube furnace. The thermodynamic parameters of the synthesis were determined using HSC Chemistry software modelling package. In addition, the synthesis process was also characterized by the thermal analysis method: simultaneous differential scanning calorimetry and thermogravimetry (DCS-TGA). The characterization of the synthesized tin sulphides powders included analysis of chemical composition by optical emission spectroscopy, phase composition identification by X-ray diffraction (XRD) and examination of morphology, as well as elemental composition by scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS). The hexagonal SnS2 and orthorhombic Sn2S3 phases were formed after the thermal treatment of starting powders in nitrogen atmosphere. The obtained results indicate the positive effects of the graphite addition which enables the synthesis of tin sulphide powders with appropriate content of sulphide phases with minimal loss of sulphur.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive",
pages = "433-423",
number = "4",
volume = "84",
doi = "10.2298/JSC180628102G"
}

Gajić, N., Kamberović, Ž., Anđić, Z., Korać, M., Trpčevská, J.,& Stamatović, M.. (2019). Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 84(4), 423-433.
https://doi.org/10.2298/JSC180628102G

Gajić N, Kamberović Ž, Anđić Z, Korać M, Trpčevská J, Stamatović M. Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive. in Journal of the Serbian Chemical Society. 2019;84(4):423-433.
doi:10.2298/JSC180628102G .

Gajić, Nataša, Kamberović, Željko, Anđić, Zoran, Korać, Marija, Trpčevská, Jarmila, Stamatović, Mirko, "Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive" in Journal of the Serbian Chemical Society, 84, no. 4 (2019):423-433,
https://doi.org/10.2298/JSC180628102G . .

TY  - JOUR
AU  - Kamberović, Željko
AU  - Ranitović, Milisav
AU  - Korać, Marija
AU  - Anđić, Zoran
AU  - Gajić, Nataša
AU  - Đokić, Jovana
AU  - Jevtić, Sanja
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3896
AB  - This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, cementation, precipitation, reduction and electrowinning. According to the results obtained in the laboratory tests, 92.4% Cu, 98.5% Pb, 96.8% Ag and over 99% Au could be selectively leached and recovered using mineral acids: sulfuric, nitric and aqua regia. Problematic tin recovery was addressed with comprehensive theoretical and experimental work, so 55.4% of Sn could be recovered through the novel physical method, which consists of two-step phase separation. Based on the results, an integral hydrometallurgical route for selective base and precious metals recovery though consecutive steps, (i) Cu, (ii) Sn, (iii) Pb and Ag, and (iv) Au, was developed. The route was tested at scaled-up laboratory level, confirming feasibility of the process and efficiencies of metals recovery. According to the obtained results, the proposed hydrometallurgical route represents an innovative and promising method for selective metals recovery from WPCBs, particularly applicable in small scale hydrometallurgical environments, focused on medium and high grade WPCBs recycling.
PB  - MDPI, Basel
T2  - Metals
T1  - Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards
IS  - 6
VL  - 8
DO  - 10.3390/met8060441
ER  - 

@article{
author = "Kamberović, Željko and Ranitović, Milisav and Korać, Marija and Anđić, Zoran and Gajić, Nataša and Đokić, Jovana and Jevtić, Sanja",
year = "2018",
abstract = "This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, cementation, precipitation, reduction and electrowinning. According to the results obtained in the laboratory tests, 92.4% Cu, 98.5% Pb, 96.8% Ag and over 99% Au could be selectively leached and recovered using mineral acids: sulfuric, nitric and aqua regia. Problematic tin recovery was addressed with comprehensive theoretical and experimental work, so 55.4% of Sn could be recovered through the novel physical method, which consists of two-step phase separation. Based on the results, an integral hydrometallurgical route for selective base and precious metals recovery though consecutive steps, (i) Cu, (ii) Sn, (iii) Pb and Ag, and (iv) Au, was developed. The route was tested at scaled-up laboratory level, confirming feasibility of the process and efficiencies of metals recovery. According to the obtained results, the proposed hydrometallurgical route represents an innovative and promising method for selective metals recovery from WPCBs, particularly applicable in small scale hydrometallurgical environments, focused on medium and high grade WPCBs recycling.",
publisher = "MDPI, Basel",
journal = "Metals",
title = "Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards",
number = "6",
volume = "8",
doi = "10.3390/met8060441"
}

Kamberović, Ž., Ranitović, M., Korać, M., Anđić, Z., Gajić, N., Đokić, J.,& Jevtić, S.. (2018). Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards. in Metals
MDPI, Basel., 8(6).
https://doi.org/10.3390/met8060441

Kamberović Ž, Ranitović M, Korać M, Anđić Z, Gajić N, Đokić J, Jevtić S. Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards. in Metals. 2018;8(6).
doi:10.3390/met8060441 .

Kamberović, Željko, Ranitović, Milisav, Korać, Marija, Anđić, Zoran, Gajić, Nataša, Đokić, Jovana, Jevtić, Sanja, "Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards" in Metals, 8, no. 6 (2018),
https://doi.org/10.3390/met8060441 . .

TY  - CONF
AU  - Dimitrijević, Stevan
AU  - Kamberović, Željko
AU  - Ranitović, Milisav
AU  - Dimitrijević, Silvana
AU  - Korać, Marija
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6979
AB  - This paper presents the method for preparation the fine Ag powder with a particles size smaller than 2 μm. Reduction was performed from the nitrate solution directly by the vigorous stirring at the room temperature by the use of ascorbic acid as the reducing agent and polyvinylpyridine as the protecting agent. Silver powder with nearly spherical particles and size of micrometers were prepared by the chemical reduction and characterized by the scanning electron microscope (SEM). The SEM analysis has shown that preferred size, less than 2 μm was obtained. Silver with purity of 99.9% or more was obtained.
PB  - Bor : Mining and Metallurgy Institute
C3  - Proceedings / 50th International October Conference on Mining and Metallurgy - IOC 2018, 30th September - 3rd October 2018 Bor Lake, Serbia
T1  - Silver micro-sized powder obtained by the chemical reduction
EP  - 278
SP  - 273
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6979
ER  - 

@conference{
author = "Dimitrijević, Stevan and Kamberović, Željko and Ranitović, Milisav and Dimitrijević, Silvana and Korać, Marija",
year = "2018",
abstract = "This paper presents the method for preparation the fine Ag powder with a particles size smaller than 2 μm. Reduction was performed from the nitrate solution directly by the vigorous stirring at the room temperature by the use of ascorbic acid as the reducing agent and polyvinylpyridine as the protecting agent. Silver powder with nearly spherical particles and size of micrometers were prepared by the chemical reduction and characterized by the scanning electron microscope (SEM). The SEM analysis has shown that preferred size, less than 2 μm was obtained. Silver with purity of 99.9% or more was obtained.",
publisher = "Bor : Mining and Metallurgy Institute",
journal = "Proceedings / 50th International October Conference on Mining and Metallurgy - IOC 2018, 30th September - 3rd October 2018 Bor Lake, Serbia",
title = "Silver micro-sized powder obtained by the chemical reduction",
pages = "278-273",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6979"
}

Dimitrijević, S., Kamberović, Ž., Ranitović, M., Dimitrijević, S.,& Korać, M.. (2018). Silver micro-sized powder obtained by the chemical reduction. in Proceedings / 50th International October Conference on Mining and Metallurgy - IOC 2018, 30th September - 3rd October 2018 Bor Lake, Serbia
Bor : Mining and Metallurgy Institute., 273-278.
https://hdl.handle.net/21.15107/rcub_technorep_6979

Dimitrijević S, Kamberović Ž, Ranitović M, Dimitrijević S, Korać M. Silver micro-sized powder obtained by the chemical reduction. in Proceedings / 50th International October Conference on Mining and Metallurgy - IOC 2018, 30th September - 3rd October 2018 Bor Lake, Serbia. 2018;:273-278.
https://hdl.handle.net/21.15107/rcub_technorep_6979 .

Dimitrijević, Stevan, Kamberović, Željko, Ranitović, Milisav, Dimitrijević, Silvana, Korać, Marija, "Silver micro-sized powder obtained by the chemical reduction" in Proceedings / 50th International October Conference on Mining and Metallurgy - IOC 2018, 30th September - 3rd October 2018 Bor Lake, Serbia (2018):273-278,
https://hdl.handle.net/21.15107/rcub_technorep_6979 .

TY  - JOUR
AU  - Dimitrijević, Stevan
AU  - Parežanin, Vladimir
AU  - Kamberović, Željko
AU  - Ranitović, Milisav
AU  - Korać, Marija
AU  - Dimitrijević, Silvana
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3908
AB  - This paper presents investigations of the influence of silicon addition on the mechanical and corrosion characteristics of the sterling silver Ag-Cu-Zn alloys. The procedure for obtaining Ag-Cu-Zn-Si alloys in small ranges of composition was also presented Vickers hardness tests and three electrochemical tests were performed on the samples in this study. Open circuit potential measurements, linear polarization resistance method, and potentiodynamic polarization tests were employed to determine corrosion characteristics of the alloys. The materials were tested in 0.9% Nacl solution, artificial sweat, 0.1 and 0.01 M sodium sulfide solutions. It was shown that addition of silicone increases hardness and generally improves sulfidation resistance and corrosion characteristics in near-neutral chloride solutions of the Ag-Cu-Zn alloys.
AB  - Ovaj rad prezentuje istraživanja uticja dodatka silicijuma na mehaničke i korozione karakteristike AgCuZn legura sterling srebra. Takođe je predstavljen postupak za dobijanje
legura Ag-Cu-Zn-Si u malim opesezima sastava. Na uzorcima u ovoj studiji urađeno je
merenje tvrdoće po Vikersu i tri metode elektrohemijskih ispitivanja; merenje potencijala
otvorenog kola, metoda linearnog polarizacionog otpora i potenciodimanička polarizaciona merenja su korišćena za određivanje korozionih karakteristika legura. Materijali su
bili ispitivani u 0,9% rastvoru NaCl, veštačkom znoju, 0,1 i 0,01 M rastvorima natrijum-
-sulfida. Pokazano je da dodavanje silicijuma povećava tvrdoću i generalno poboljšava
otpornost na sulfidaciju i korozione karakteristike Ag-Cu-Zn legura u blisko neutralnim
hloridnim rastvorima.
PB  - Association of the Chemical Engineers of Serbia
T2  - Chemical Industry and Chemical Engineering Quarterly
T1  - Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics
T1  - Dizajn legura sterling srebra Ag-Cu-Zn otpornih na tamnjenje i ispitivanje uticaja dodatka silicijuma na mehaničke i korozione karakteristike
EP  - 274
IS  - 3
SP  - 267
VL  - 24
DO  - 10.2298/CICEQ170660038D
ER  - 

@article{
author = "Dimitrijević, Stevan and Parežanin, Vladimir and Kamberović, Željko and Ranitović, Milisav and Korać, Marija and Dimitrijević, Silvana",
year = "2018",
abstract = "This paper presents investigations of the influence of silicon addition on the mechanical and corrosion characteristics of the sterling silver Ag-Cu-Zn alloys. The procedure for obtaining Ag-Cu-Zn-Si alloys in small ranges of composition was also presented Vickers hardness tests and three electrochemical tests were performed on the samples in this study. Open circuit potential measurements, linear polarization resistance method, and potentiodynamic polarization tests were employed to determine corrosion characteristics of the alloys. The materials were tested in 0.9% Nacl solution, artificial sweat, 0.1 and 0.01 M sodium sulfide solutions. It was shown that addition of silicone increases hardness and generally improves sulfidation resistance and corrosion characteristics in near-neutral chloride solutions of the Ag-Cu-Zn alloys., Ovaj rad prezentuje istraživanja uticja dodatka silicijuma na mehaničke i korozione karakteristike AgCuZn legura sterling srebra. Takođe je predstavljen postupak za dobijanje
legura Ag-Cu-Zn-Si u malim opesezima sastava. Na uzorcima u ovoj studiji urađeno je
merenje tvrdoće po Vikersu i tri metode elektrohemijskih ispitivanja; merenje potencijala
otvorenog kola, metoda linearnog polarizacionog otpora i potenciodimanička polarizaciona merenja su korišćena za određivanje korozionih karakteristika legura. Materijali su
bili ispitivani u 0,9% rastvoru NaCl, veštačkom znoju, 0,1 i 0,01 M rastvorima natrijum-
-sulfida. Pokazano je da dodavanje silicijuma povećava tvrdoću i generalno poboljšava
otpornost na sulfidaciju i korozione karakteristike Ag-Cu-Zn legura u blisko neutralnim
hloridnim rastvorima.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Chemical Industry and Chemical Engineering Quarterly",
title = "Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics, Dizajn legura sterling srebra Ag-Cu-Zn otpornih na tamnjenje i ispitivanje uticaja dodatka silicijuma na mehaničke i korozione karakteristike",
pages = "274-267",
number = "3",
volume = "24",
doi = "10.2298/CICEQ170660038D"
}

Dimitrijević, S., Parežanin, V., Kamberović, Ž., Ranitović, M., Korać, M.,& Dimitrijević, S.. (2018). Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics. in Chemical Industry and Chemical Engineering Quarterly
Association of the Chemical Engineers of Serbia., 24(3), 267-274.
https://doi.org/10.2298/CICEQ170660038D

Dimitrijević S, Parežanin V, Kamberović Ž, Ranitović M, Korać M, Dimitrijević S. Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics. in Chemical Industry and Chemical Engineering Quarterly. 2018;24(3):267-274.
doi:10.2298/CICEQ170660038D .

Dimitrijević, Stevan, Parežanin, Vladimir, Kamberović, Željko, Ranitović, Milisav, Korać, Marija, Dimitrijević, Silvana, "Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics" in Chemical Industry and Chemical Engineering Quarterly, 24, no. 3 (2018):267-274,
https://doi.org/10.2298/CICEQ170660038D . .

TY  - JOUR
AU  - Korać, Marija
AU  - Dimitrijević, Stevan
AU  - Delijić, Kemal
AU  - Kamberović, Željko
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3915
AB  - This paper presents investigations of aluminum addition influence on the corrosion characteristics of the sterling silver Ag-Cu-Zn-Si alloys. The procedure for obtaining Ag-Cu-Zn-Al-Si alloys in small ranges of predefined composition was also presented. Open circuit potential measurements, linear polarization resistance method and potentiodynamic polarization tests were employed to determine corrosion characteristics of the alloys. The materials were tested in a 0.01M sodium sulfide solution. It was shown that the addition of aluminum improves sulfidization resistance and corrosion characteristics. Best results are achieved for the alloy with the following composition 92.5% Ag, 1.9% Cu, 3.7% Zn, 1.6% Al and 0.3% Si.
PB  - Association of Metallurgical Engineers of Serbia AMES
T2  - Metallurgical and Materials Engineering
T1  - Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum
EP  - 188
IS  - 3
SP  - 181
VL  - 24
DO  - 10.30544/386
ER  - 

@article{
author = "Korać, Marija and Dimitrijević, Stevan and Delijić, Kemal and Kamberović, Željko",
year = "2018",
abstract = "This paper presents investigations of aluminum addition influence on the corrosion characteristics of the sterling silver Ag-Cu-Zn-Si alloys. The procedure for obtaining Ag-Cu-Zn-Al-Si alloys in small ranges of predefined composition was also presented. Open circuit potential measurements, linear polarization resistance method and potentiodynamic polarization tests were employed to determine corrosion characteristics of the alloys. The materials were tested in a 0.01M sodium sulfide solution. It was shown that the addition of aluminum improves sulfidization resistance and corrosion characteristics. Best results are achieved for the alloy with the following composition 92.5% Ag, 1.9% Cu, 3.7% Zn, 1.6% Al and 0.3% Si.",
publisher = "Association of Metallurgical Engineers of Serbia AMES",
journal = "Metallurgical and Materials Engineering",
title = "Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum",
pages = "188-181",
number = "3",
volume = "24",
doi = "10.30544/386"
}

Korać, M., Dimitrijević, S., Delijić, K.,& Kamberović, Ž.. (2018). Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum. in Metallurgical and Materials Engineering
Association of Metallurgical Engineers of Serbia AMES., 24(3), 181-188.
https://doi.org/10.30544/386

Korać M, Dimitrijević S, Delijić K, Kamberović Ž. Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum. in Metallurgical and Materials Engineering. 2018;24(3):181-188.
doi:10.30544/386 .

Korać, Marija, Dimitrijević, Stevan, Delijić, Kemal, Kamberović, Željko, "Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum" in Metallurgical and Materials Engineering, 24, no. 3 (2018):181-188,
https://doi.org/10.30544/386 . .

TY  - JOUR
AU  - Radivojević, M.
AU  - Pendić, J.
AU  - Srejić, A.
AU  - Korać, Marija
AU  - Davey, C.
AU  - Benzonelli, A.
AU  - Martinon-Torres, M.
AU  - Jovanović, N.
AU  - Kamberović, Željko
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3954
AB  - The aesthetic appearance of metals has long been recognised in archaeometric studies as an important factor driving inventions and innovations in the evolution of metal production. Nevertheless, while studies of ancient gold metallurgy are well supported by modern research in colour characteristics of gold alloys, the colour properties of major prehistoric copper alloys, such as arsenical copper and tin bronzes, remain either largely understudied or not easily accessible to the western scholarship. A few published studies have already indicated that alloying and heat treatment change the colours of copper alloys, although they are mainly based on examples of prehistoric tin bronze objects and experimental casts. Here we present a procedure for building the Cu-As-Sn ternary colour diagram, starting with experimental casting of 64 binary and ternary alloys in this system. We used two types of information to produce two different ternary colour diagrams: one based on photographs of the samples, and the other based on the colorimetric measurements. Furthermore, we developed a procedure for creating a graphic representation of colours in the Cu-As-Sn ternary diagram using QGIS. As an initial case study, we plotted the composition of the world's earliest tin bronze artefacts; the graphic representation further supports claims about the importance of a golden hue for their invention and demand, c. 6500 years ago. We argue that the presented colour diagrams will find wide use in future investigations of aesthetics of prehistoric copper alloys.
PB  - Academic Press Ltd- Elsevier Science Ltd, London
T2  - Journal of Archaeological Science
T1  - Experimental design of the Cu-As-Sn ternary colour diagram
EP  - 119
SP  - 106
VL  - 90
DO  - 10.1016/j.jas.2017.12.001
ER  - 

@article{
author = "Radivojević, M. and Pendić, J. and Srejić, A. and Korać, Marija and Davey, C. and Benzonelli, A. and Martinon-Torres, M. and Jovanović, N. and Kamberović, Željko",
year = "2018",
abstract = "The aesthetic appearance of metals has long been recognised in archaeometric studies as an important factor driving inventions and innovations in the evolution of metal production. Nevertheless, while studies of ancient gold metallurgy are well supported by modern research in colour characteristics of gold alloys, the colour properties of major prehistoric copper alloys, such as arsenical copper and tin bronzes, remain either largely understudied or not easily accessible to the western scholarship. A few published studies have already indicated that alloying and heat treatment change the colours of copper alloys, although they are mainly based on examples of prehistoric tin bronze objects and experimental casts. Here we present a procedure for building the Cu-As-Sn ternary colour diagram, starting with experimental casting of 64 binary and ternary alloys in this system. We used two types of information to produce two different ternary colour diagrams: one based on photographs of the samples, and the other based on the colorimetric measurements. Furthermore, we developed a procedure for creating a graphic representation of colours in the Cu-As-Sn ternary diagram using QGIS. As an initial case study, we plotted the composition of the world's earliest tin bronze artefacts; the graphic representation further supports claims about the importance of a golden hue for their invention and demand, c. 6500 years ago. We argue that the presented colour diagrams will find wide use in future investigations of aesthetics of prehistoric copper alloys.",
publisher = "Academic Press Ltd- Elsevier Science Ltd, London",
journal = "Journal of Archaeological Science",
title = "Experimental design of the Cu-As-Sn ternary colour diagram",
pages = "119-106",
volume = "90",
doi = "10.1016/j.jas.2017.12.001"
}

Radivojević, M., Pendić, J., Srejić, A., Korać, M., Davey, C., Benzonelli, A., Martinon-Torres, M., Jovanović, N.,& Kamberović, Ž.. (2018). Experimental design of the Cu-As-Sn ternary colour diagram. in Journal of Archaeological Science
Academic Press Ltd- Elsevier Science Ltd, London., 90, 106-119.
https://doi.org/10.1016/j.jas.2017.12.001

Radivojević M, Pendić J, Srejić A, Korać M, Davey C, Benzonelli A, Martinon-Torres M, Jovanović N, Kamberović Ž. Experimental design of the Cu-As-Sn ternary colour diagram. in Journal of Archaeological Science. 2018;90:106-119.
doi:10.1016/j.jas.2017.12.001 .

Radivojević, M., Pendić, J., Srejić, A., Korać, Marija, Davey, C., Benzonelli, A., Martinon-Torres, M., Jovanović, N., Kamberović, Željko, "Experimental design of the Cu-As-Sn ternary colour diagram" in Journal of Archaeological Science, 90 (2018):106-119,
https://doi.org/10.1016/j.jas.2017.12.001 . .

TY  - JOUR
AU  - Kamberović, Željko
AU  - Ranitović, Milisav
AU  - Korać, Marija
AU  - Jovanović, Nikola
AU  - Tomović, Božidar
AU  - Gajić, Nataša
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4018
AB  - This paper presents the results of theoretical assessment and a preliminary experimental investigation of the modified pyrometallurgical processing of metallic granulate obtained after mechanical treatment of waste printed circuit boards (WPCBs). The studied two-step process included oxidation of metallic granulate followed by pyrometallurgical refining in a DC arc-furnace. In the investigated process, the oxygen bounded in metal oxides, obtained during the oxidation annealing of granulate, was used as a "solid" oxidizer for subsequent pyrometallurgical refining in a DC arc-furnace. According to the obtained results, the Cu content in the produced metallic phase (anodic copper) was 98.4% and is suitable for further electro-refining process. In addition, over 94% of Au was concentrated in metallic phase, suggesting that a high Au yield could be attained. However, owing to the distribution between slag phase and filter product, only 60% of Ag was collected in the metal phase. In-between metal and slag is the metal-oxide phase, containing Cu with metals impurities, such as Sn and Pb, which was obtained as well, and could be further treated using conventional processes for additional metal valorization. The investigated concept would allow substitution of the long-lasting oxygen blowing process and application of complicated pyrometallurgical reactors and create a feasible alternative for lower operating capacities.
PB  - Springer, New York
T2  - Journal of Sustainable Metallurgy
T1  - Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace
EP  - 259
IS  - 2
SP  - 251
VL  - 4
DO  - 10.1007/s40831-018-0167-3
ER  - 

@article{
author = "Kamberović, Željko and Ranitović, Milisav and Korać, Marija and Jovanović, Nikola and Tomović, Božidar and Gajić, Nataša",
year = "2018",
abstract = "This paper presents the results of theoretical assessment and a preliminary experimental investigation of the modified pyrometallurgical processing of metallic granulate obtained after mechanical treatment of waste printed circuit boards (WPCBs). The studied two-step process included oxidation of metallic granulate followed by pyrometallurgical refining in a DC arc-furnace. In the investigated process, the oxygen bounded in metal oxides, obtained during the oxidation annealing of granulate, was used as a "solid" oxidizer for subsequent pyrometallurgical refining in a DC arc-furnace. According to the obtained results, the Cu content in the produced metallic phase (anodic copper) was 98.4% and is suitable for further electro-refining process. In addition, over 94% of Au was concentrated in metallic phase, suggesting that a high Au yield could be attained. However, owing to the distribution between slag phase and filter product, only 60% of Ag was collected in the metal phase. In-between metal and slag is the metal-oxide phase, containing Cu with metals impurities, such as Sn and Pb, which was obtained as well, and could be further treated using conventional processes for additional metal valorization. The investigated concept would allow substitution of the long-lasting oxygen blowing process and application of complicated pyrometallurgical reactors and create a feasible alternative for lower operating capacities.",
publisher = "Springer, New York",
journal = "Journal of Sustainable Metallurgy",
title = "Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace",
pages = "259-251",
number = "2",
volume = "4",
doi = "10.1007/s40831-018-0167-3"
}

Kamberović, Ž., Ranitović, M., Korać, M., Jovanović, N., Tomović, B.,& Gajić, N.. (2018). Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace. in Journal of Sustainable Metallurgy
Springer, New York., 4(2), 251-259.
https://doi.org/10.1007/s40831-018-0167-3

Kamberović Ž, Ranitović M, Korać M, Jovanović N, Tomović B, Gajić N. Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace. in Journal of Sustainable Metallurgy. 2018;4(2):251-259.
doi:10.1007/s40831-018-0167-3 .

Kamberović, Željko, Ranitović, Milisav, Korać, Marija, Jovanović, Nikola, Tomović, Božidar, Gajić, Nataša, "Pyro-Refining of Mechanically Treated Waste Printed Circuit Boards in a DC Arc-Furnace" in Journal of Sustainable Metallurgy, 4, no. 2 (2018):251-259,
https://doi.org/10.1007/s40831-018-0167-3 . .

TY  - CONF
AU  - Kamberović, Željko
AU  - Simón Muzás, Juan
AU  - Dimitrijević, Stevan
AU  - Korać, Marija
AU  - Dimitrijević, Silvana
AU  - Delijić, Kemal
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6982
AB  - The scope of the presented study refers to the mechanical and electrical properties of the sterling silver in relation on silicon content in the alloy. Sterling silver is an alloy of silver containing 92.5% by weight of silver and 7.5% by weight of copper or other metals, whereas in the presented research, 0.05-0.3% of copper was replaced with silicon. Hardness, compression and electrical conductivity of the sterling silver with silicone addition have been investigated in this study. Electrical conductivity and reduction percentage decrease with increase content of silicone. The same effect but to a lesser extent was found for the hardness.
PB  - Bor : University of Belgrade, Technical Faculty
C3  - Proceedings / 49th international october conference on mining and metallurgy - IOC 2017, Bor lake, Serbia, october 18-21, 2017
T1  - Influence of silicon on characteristics of sterling silver
EP  - 427
SP  - 424
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6982
ER  - 

@conference{
author = "Kamberović, Željko and Simón Muzás, Juan and Dimitrijević, Stevan and Korać, Marija and Dimitrijević, Silvana and Delijić, Kemal",
year = "2017",
abstract = "The scope of the presented study refers to the mechanical and electrical properties of the sterling silver in relation on silicon content in the alloy. Sterling silver is an alloy of silver containing 92.5% by weight of silver and 7.5% by weight of copper or other metals, whereas in the presented research, 0.05-0.3% of copper was replaced with silicon. Hardness, compression and electrical conductivity of the sterling silver with silicone addition have been investigated in this study. Electrical conductivity and reduction percentage decrease with increase content of silicone. The same effect but to a lesser extent was found for the hardness.",
publisher = "Bor : University of Belgrade, Technical Faculty",
journal = "Proceedings / 49th international october conference on mining and metallurgy - IOC 2017, Bor lake, Serbia, october 18-21, 2017",
title = "Influence of silicon on characteristics of sterling silver",
pages = "427-424",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6982"
}

Kamberović, Ž., Simón Muzás, J., Dimitrijević, S., Korać, M., Dimitrijević, S.,& Delijić, K.. (2017). Influence of silicon on characteristics of sterling silver. in Proceedings / 49th international october conference on mining and metallurgy - IOC 2017, Bor lake, Serbia, october 18-21, 2017
Bor : University of Belgrade, Technical Faculty., 424-427.
https://hdl.handle.net/21.15107/rcub_technorep_6982

Kamberović Ž, Simón Muzás J, Dimitrijević S, Korać M, Dimitrijević S, Delijić K. Influence of silicon on characteristics of sterling silver. in Proceedings / 49th international october conference on mining and metallurgy - IOC 2017, Bor lake, Serbia, october 18-21, 2017. 2017;:424-427.
https://hdl.handle.net/21.15107/rcub_technorep_6982 .

Kamberović, Željko, Simón Muzás, Juan, Dimitrijević, Stevan, Korać, Marija, Dimitrijević, Silvana, Delijić, Kemal, "Influence of silicon on characteristics of sterling silver" in Proceedings / 49th international october conference on mining and metallurgy - IOC 2017, Bor lake, Serbia, october 18-21, 2017 (2017):424-427,
https://hdl.handle.net/21.15107/rcub_technorep_6982 .

TY  - JOUR
AU  - Kamberović, Željko
AU  - Anđić, Zoran
AU  - Korać, Marija
AU  - Gajić, Nataša
AU  - Tomović, Božidar
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3575
AB  - Wide application of hard metals requires increased consumption of their constituents. Their high cost and scarcity impose the need for finding new, both ecologically and economically justified ways for their production. In presented research, on the basis of previous research, a review of an integrated technological procedure of recycling and valorization of useful components from hard metals secondary raw materials is given. Integrated procedure for processing of hard metal's waste enables the preparation of a wide range of powders with required properties, a high efficiency and reducing the duration of individual stages of procedures for their processing. Therefore, besides conservation of natural resources there are also significant economic and energetic benefits. The developed technological procedure is in service of sustainable development.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals
EP  - 181
IS  - 2
SP  - 167
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3575
ER  - 

@article{
author = "Kamberović, Željko and Anđić, Zoran and Korać, Marija and Gajić, Nataša and Tomović, Božidar",
year = "2017",
abstract = "Wide application of hard metals requires increased consumption of their constituents. Their high cost and scarcity impose the need for finding new, both ecologically and economically justified ways for their production. In presented research, on the basis of previous research, a review of an integrated technological procedure of recycling and valorization of useful components from hard metals secondary raw materials is given. Integrated procedure for processing of hard metal's waste enables the preparation of a wide range of powders with required properties, a high efficiency and reducing the duration of individual stages of procedures for their processing. Therefore, besides conservation of natural resources there are also significant economic and energetic benefits. The developed technological procedure is in service of sustainable development.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals",
pages = "181-167",
number = "2",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3575"
}

Kamberović, Ž., Anđić, Z., Korać, M., Gajić, N.,& Tomović, B.. (2017). Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals. in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 23(2), 167-181.
https://hdl.handle.net/21.15107/rcub_technorep_3575

Kamberović Ž, Anđić Z, Korać M, Gajić N, Tomović B. Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals. in Metallurgical & Materials Engineering. 2017;23(2):167-181.
https://hdl.handle.net/21.15107/rcub_technorep_3575 .

Kamberović, Željko, Anđić, Zoran, Korać, Marija, Gajić, Nataša, Tomović, Božidar, "Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals" in Metallurgical & Materials Engineering, 23, no. 2 (2017):167-181,
https://hdl.handle.net/21.15107/rcub_technorep_3575 .

TY  - JOUR
AU  - Manojlović, Vaso
AU  - Kamberović, Željko
AU  - Gavrilovski, Milorad
AU  - Sokić, Miroslav
AU  - Korać, Marija
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3699
AB  - Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust (EAFD), mill scale, and secondary aluminum, in a form of waste foil, was researched aiming to use exothermal energy of reactions and to obtain environmentally favorable products. The secondary aluminum in the form of foil was prepared in different ways in order to develop aluminum surface and to be suitable for aluminothermic reactions. The commercial aluminum powder was used to determine optimal conditions using full factorial experiment design. After that, research was performed on aluminothermic reactions with the aluminum powder obtained from secondary aluminum foils. Results show that the secondary aluminum can be successfully used for a treatment of oxides bearing hazardous wastes in an energy efficient and environmentally friendly manner. The comparative life-cycle assessment revealed several advantages of using the secondary aluminum foil as a reduction agent compared to the conventional recycling of the secondary aluminum foil.
PB  - Taylor & Francis Inc, Philadelphia
T2  - Combustion Science and Technology
T1  - Combustion of Metallurgical Wastes Using Secondary Aluminum Foils
EP  - 1089
IS  - 6
SP  - 1072
VL  - 189
DO  - 10.1080/00102202.2016.1274310
ER  - 

@article{
author = "Manojlović, Vaso and Kamberović, Željko and Gavrilovski, Milorad and Sokić, Miroslav and Korać, Marija",
year = "2017",
abstract = "Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust (EAFD), mill scale, and secondary aluminum, in a form of waste foil, was researched aiming to use exothermal energy of reactions and to obtain environmentally favorable products. The secondary aluminum in the form of foil was prepared in different ways in order to develop aluminum surface and to be suitable for aluminothermic reactions. The commercial aluminum powder was used to determine optimal conditions using full factorial experiment design. After that, research was performed on aluminothermic reactions with the aluminum powder obtained from secondary aluminum foils. Results show that the secondary aluminum can be successfully used for a treatment of oxides bearing hazardous wastes in an energy efficient and environmentally friendly manner. The comparative life-cycle assessment revealed several advantages of using the secondary aluminum foil as a reduction agent compared to the conventional recycling of the secondary aluminum foil.",
publisher = "Taylor & Francis Inc, Philadelphia",
journal = "Combustion Science and Technology",
title = "Combustion of Metallurgical Wastes Using Secondary Aluminum Foils",
pages = "1089-1072",
number = "6",
volume = "189",
doi = "10.1080/00102202.2016.1274310"
}

Manojlović, V., Kamberović, Ž., Gavrilovski, M., Sokić, M.,& Korać, M.. (2017). Combustion of Metallurgical Wastes Using Secondary Aluminum Foils. in Combustion Science and Technology
Taylor & Francis Inc, Philadelphia., 189(6), 1072-1089.
https://doi.org/10.1080/00102202.2016.1274310

Manojlović V, Kamberović Ž, Gavrilovski M, Sokić M, Korać M. Combustion of Metallurgical Wastes Using Secondary Aluminum Foils. in Combustion Science and Technology. 2017;189(6):1072-1089.
doi:10.1080/00102202.2016.1274310 .

Manojlović, Vaso, Kamberović, Željko, Gavrilovski, Milorad, Sokić, Miroslav, Korać, Marija, "Combustion of Metallurgical Wastes Using Secondary Aluminum Foils" in Combustion Science and Technology, 189, no. 6 (2017):1072-1089,
https://doi.org/10.1080/00102202.2016.1274310 . .

TY  - JOUR
AU  - Nikolić, Vesna
AU  - Kamberović, Željko
AU  - Korać, Marija
AU  - Anđić, Zoran
AU  - Mihajlović, Aleksandar
AU  - Uljarević, Jelena B.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3266
AB  - The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning electron microscopy and chemical analysis by energy-dispersive spectroscopy. Ni/Al2O3 and Ni-Pd/Al2O3 catalysts supported on alpha-Al2O3-based foams were synthesized by aerosol assisted impregnation. Impregnation of the foams by ultrasonically aerosolized chlorides was followed by drying at 473 K and hydrogen reduction at 533 and 633 K. Lower Ni loading resulted in higher reduction degrees. Ni loading of 20 wt.% enabled relatively uniform coverage of the foam with a metallic coating. Nearly complete reduction was achieved at both temperatures with activity modifier (Pd). Reduction degrees reached 99.4 and 98.2 wt.% at 533 K for 5 and 20 wt.% of Ni, respectively.
PB  - Savez hemijskih inženjera, Beograd
T2  - Hemijska industrija
T1  - Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium
EP  - 142
IS  - 2
SP  - 137
VL  - 70
DO  - 10.2298/HEMIND140928090N
ER  - 

@article{
author = "Nikolić, Vesna and Kamberović, Željko and Korać, Marija and Anđić, Zoran and Mihajlović, Aleksandar and Uljarević, Jelena B.",
year = "2016",
abstract = "The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning electron microscopy and chemical analysis by energy-dispersive spectroscopy. Ni/Al2O3 and Ni-Pd/Al2O3 catalysts supported on alpha-Al2O3-based foams were synthesized by aerosol assisted impregnation. Impregnation of the foams by ultrasonically aerosolized chlorides was followed by drying at 473 K and hydrogen reduction at 533 and 633 K. Lower Ni loading resulted in higher reduction degrees. Ni loading of 20 wt.% enabled relatively uniform coverage of the foam with a metallic coating. Nearly complete reduction was achieved at both temperatures with activity modifier (Pd). Reduction degrees reached 99.4 and 98.2 wt.% at 533 K for 5 and 20 wt.% of Ni, respectively.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Hemijska industrija",
title = "Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium",
pages = "142-137",
number = "2",
volume = "70",
doi = "10.2298/HEMIND140928090N"
}

Nikolić, V., Kamberović, Ž., Korać, M., Anđić, Z., Mihajlović, A.,& Uljarević, J. B.. (2016). Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium. in Hemijska industrija
Savez hemijskih inženjera, Beograd., 70(2), 137-142.
https://doi.org/10.2298/HEMIND140928090N

Nikolić V, Kamberović Ž, Korać M, Anđić Z, Mihajlović A, Uljarević JB. Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium. in Hemijska industrija. 2016;70(2):137-142.
doi:10.2298/HEMIND140928090N .

Nikolić, Vesna, Kamberović, Željko, Korać, Marija, Anđić, Zoran, Mihajlović, Aleksandar, Uljarević, Jelena B., "Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium" in Hemijska industrija, 70, no. 2 (2016):137-142,
https://doi.org/10.2298/HEMIND140928090N . .

TY  - JOUR
AU  - Anđić, Zoran
AU  - Korać, Marija
AU  - Kamberović, Željko
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3208
AB  - Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that occur in the accident, as well as the modeling of the system of protection against air-pollution due to the cancellation of work the bag filter was carried out. Applying the model (Aloha software package) provides an overview of possible developments of events and zones of propagation of the precipitated particulate matter through the share of cadmium (Cd) in them. In the case of malfunction of filter system, emissions of particulate matter enormously exceed the permitted values. In the conditions of the simulated accident, particle velocity of flue gases was amounted E ≈ 738 mg/s or 2657 g/h of dust. The propagation of the precipitated particulate matter in the lower layer of the atmosphere, downwind, given trough the share of Cd in them, is 100 m from the source of pollution for the characteristic density of 5 mg/m2×day and 140m for the characteristic density of 2 mg/m2×day, in the stable state of the atmosphere, i.e. 870 m and 1100 m, respectively, in the neutral state of the atmosphere.
PB  - Association of Metallurgical Engineers of Serbia
T2  - Metallurgical & Materials Engineering
T1  - Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution
EP  - 311
IS  - 4
SP  - 303
VL  - 22
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3208
ER  - 

@article{
author = "Anđić, Zoran and Korać, Marija and Kamberović, Željko",
year = "2016",
abstract = "Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that occur in the accident, as well as the modeling of the system of protection against air-pollution due to the cancellation of work the bag filter was carried out. Applying the model (Aloha software package) provides an overview of possible developments of events and zones of propagation of the precipitated particulate matter through the share of cadmium (Cd) in them. In the case of malfunction of filter system, emissions of particulate matter enormously exceed the permitted values. In the conditions of the simulated accident, particle velocity of flue gases was amounted E ≈ 738 mg/s or 2657 g/h of dust. The propagation of the precipitated particulate matter in the lower layer of the atmosphere, downwind, given trough the share of Cd in them, is 100 m from the source of pollution for the characteristic density of 5 mg/m2×day and 140m for the characteristic density of 2 mg/m2×day, in the stable state of the atmosphere, i.e. 870 m and 1100 m, respectively, in the neutral state of the atmosphere.",
publisher = "Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical & Materials Engineering",
title = "Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution",
pages = "311-303",
number = "4",
volume = "22",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3208"
}

Anđić, Z., Korać, M.,& Kamberović, Ž.. (2016). Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution. in Metallurgical & Materials Engineering
Association of Metallurgical Engineers of Serbia., 22(4), 303-311.
https://hdl.handle.net/21.15107/rcub_technorep_3208

Anđić Z, Korać M, Kamberović Ž. Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution. in Metallurgical & Materials Engineering. 2016;22(4):303-311.
https://hdl.handle.net/21.15107/rcub_technorep_3208 .

Anđić, Zoran, Korać, Marija, Kamberović, Željko, "Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution" in Metallurgical & Materials Engineering, 22, no. 4 (2016):303-311,
https://hdl.handle.net/21.15107/rcub_technorep_3208 .

TY  - JOUR
AU  - Kamberović, Željko
AU  - Korać, Marija
AU  - Ranitović, Milisav
AU  - Majinski, Nikola
AU  - Gajić, Nataša
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3218
AB  - Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of by­products and waste materials into resources. Focusing on treatment of specific by-products from zinc and copper primary production, as well on specific waste streams like WEEE and waste automotive catalysts, group is actively contribute to the Serbia, region and EU sustainability policies. In terms of sustainable development, metallurgy is a traditional part of the solution rather than part of the problem, so it is necessary to take the chance and centuries-old tradition.
AB  - U ovom radu predstavljena je kompilacija naučnih rezultata (teorijskih i eksperimentalnih) sa osnovnim ciljem da direktno promoviše sinergiju različitih industrijskih aktivnosti u metalurgiji, koja u krajnjem ishoduje profitabilnom transformacijom različitih nusprodukata i otpadnih materijala u izvore vrednih metalnih materijala. Kao što je prikazano, fokusirajući se na tretman specifičnih nusprodukata iz primarne proizvodnje cinka i bakra, kao i na tretman specifičnih otpadnih tokova poput e-otpada ili odbačenih automobilskih katalizatora, doprinosi se strategiji održivog razvoja kako Srbije, tako i regiona. U pogledu održivog razvoja, metalurgija je tradicionalni deo rešenja, a ne deo problema, zato je potrebno iskoristiti priliku i vekovnu tradiciju.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials
T1  - Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina
EP  - 229
IS  - 2
SP  - 221
VL  - 71
DO  - 10.5937/tehnikal602221K
ER  - 

@article{
author = "Kamberović, Željko and Korać, Marija and Ranitović, Milisav and Majinski, Nikola and Gajić, Nataša",
year = "2016",
abstract = "Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of by­products and waste materials into resources. Focusing on treatment of specific by-products from zinc and copper primary production, as well on specific waste streams like WEEE and waste automotive catalysts, group is actively contribute to the Serbia, region and EU sustainability policies. In terms of sustainable development, metallurgy is a traditional part of the solution rather than part of the problem, so it is necessary to take the chance and centuries-old tradition., U ovom radu predstavljena je kompilacija naučnih rezultata (teorijskih i eksperimentalnih) sa osnovnim ciljem da direktno promoviše sinergiju različitih industrijskih aktivnosti u metalurgiji, koja u krajnjem ishoduje profitabilnom transformacijom različitih nusprodukata i otpadnih materijala u izvore vrednih metalnih materijala. Kao što je prikazano, fokusirajući se na tretman specifičnih nusprodukata iz primarne proizvodnje cinka i bakra, kao i na tretman specifičnih otpadnih tokova poput e-otpada ili odbačenih automobilskih katalizatora, doprinosi se strategiji održivog razvoja kako Srbije, tako i regiona. U pogledu održivog razvoja, metalurgija je tradicionalni deo rešenja, a ne deo problema, zato je potrebno iskoristiti priliku i vekovnu tradiciju.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials, Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina",
pages = "229-221",
number = "2",
volume = "71",
doi = "10.5937/tehnikal602221K"
}

Kamberović, Ž., Korać, M., Ranitović, M., Majinski, N.,& Gajić, N.. (2016). Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 71(2), 221-229.
https://doi.org/10.5937/tehnikal602221K

Kamberović Ž, Korać M, Ranitović M, Majinski N, Gajić N. Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials. in Tehnika. 2016;71(2):221-229.
doi:10.5937/tehnikal602221K .

Kamberović, Željko, Korać, Marija, Ranitović, Milisav, Majinski, Nikola, Gajić, Nataša, "Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials" in Tehnika, 71, no. 2 (2016):221-229,
https://doi.org/10.5937/tehnikal602221K . .