TY  - JOUR
AU  - Ilić-Stojanović, Snežana
AU  - Nikolić, Ljubiša B.
AU  - Nikolić, Vesna D.
AU  - Petrović, Slobodan
AU  - Zdravković, Aleksandar S.
AU  - Stamenković, Jakov
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2606
AB  - This paper presents the procedure for the synthesis of hydrogels based on N-isopropylacrylamide (NIPAM) and 2-hydroxypropyl methacrylate (HPMet) using dioxan as a solvent. Hydrogels were obtained by radical polymerization using different contents of ethylene glycol dimethacrylate as a cross-linker and benzoyl peroxide as the initiator. In the FTIR spectra of poly(N-isopropylacrylamide-co- 2-hydroxypropylmethacrylate) (p(NIPAM-HPMet)) xerogel, new absorption bands are present and there are no specific bands characteristic of a monomer NIPAM, which indicates that copolymerization was performed. SEM micrographs show porous surfaces of xerogels. The aim of this work was the investigation of the swelling behavior for all synthesized hydrogels with different cross-linker content at the temperature from 20 to 40°C. The sample of p(NIPAM-HPMet) with the lowest cross-linker content reached the highest swelling degree at 20°C (α=20.23). The degree of swelling decreased with increa-sing the cross-linker content and temperature, so the samples with highest cross-linker content at 40°C reached the swelling degree of 2.05.
AB  - U radu je izvršena sinteza hidrogelova na bazi N-izopropilakrilamida (NIPAM) i 2-hidroksipropil metakrilata (HPMet), primenom dioksana kao rastvarača. Hidro­gelovi su dobijeni radikalskom polimerizacijom uz upotrebu različitog sadržaja etilenglikoldimetakrilata (EDGM) kao umreživača i benzoil peroksida kao inicijatora. U FTIR spektrima kserogelova poli(N-izopropilakrillamid-ko-2-hidrok­sipropil metakrilata) (p(NIPAM-HPMet)) prisutne su nove apsorpcione trake, a nisu prisutne pojedine trake karakteristične za monomere, što ukazuje na izvršenu kopolimerizaciju. SEM mikrografije pokazuju poroznu površinu ksero­gelova. Svojstva pri bubrenju svih sintetisanih hidrogelova praćena su na temperaturama od 20 do 40°C. Najveću sposobnost bubrenja pokazao je uzorak p(NIPAM-HPMet)-a sa najmanjim sadržajem umreživača na 20°C (α = 20,23). Sposobnost bubrenja opada pri povećanju sadržaja umreživača i temperature, tako da uzorci sa najvećim sadržajem umreživača (3 mol% EGDM-a) na 40°C dostižu stepen bubrenja od samo 2,05.
PB  - Univerzitet u Nišu - Tehnološki fakultet, Leskovac
T2  - Savremene tehnologije
T1  - The effect of the cross-linker content on the swelling properties of intelligent gels
T1  - Efekat sadržaja umreživača na svojstva bubrenja inteligentnih gelova
EP  - 15
IS  - 2
SP  - 10
VL  - 3
DO  - 10.5937/savteh1402010I
ER  - 

@article{
author = "Ilić-Stojanović, Snežana and Nikolić, Ljubiša B. and Nikolić, Vesna D. and Petrović, Slobodan and Zdravković, Aleksandar S. and Stamenković, Jakov",
year = "2014",
abstract = "This paper presents the procedure for the synthesis of hydrogels based on N-isopropylacrylamide (NIPAM) and 2-hydroxypropyl methacrylate (HPMet) using dioxan as a solvent. Hydrogels were obtained by radical polymerization using different contents of ethylene glycol dimethacrylate as a cross-linker and benzoyl peroxide as the initiator. In the FTIR spectra of poly(N-isopropylacrylamide-co- 2-hydroxypropylmethacrylate) (p(NIPAM-HPMet)) xerogel, new absorption bands are present and there are no specific bands characteristic of a monomer NIPAM, which indicates that copolymerization was performed. SEM micrographs show porous surfaces of xerogels. The aim of this work was the investigation of the swelling behavior for all synthesized hydrogels with different cross-linker content at the temperature from 20 to 40°C. The sample of p(NIPAM-HPMet) with the lowest cross-linker content reached the highest swelling degree at 20°C (α=20.23). The degree of swelling decreased with increa-sing the cross-linker content and temperature, so the samples with highest cross-linker content at 40°C reached the swelling degree of 2.05., U radu je izvršena sinteza hidrogelova na bazi N-izopropilakrilamida (NIPAM) i 2-hidroksipropil metakrilata (HPMet), primenom dioksana kao rastvarača. Hidro­gelovi su dobijeni radikalskom polimerizacijom uz upotrebu različitog sadržaja etilenglikoldimetakrilata (EDGM) kao umreživača i benzoil peroksida kao inicijatora. U FTIR spektrima kserogelova poli(N-izopropilakrillamid-ko-2-hidrok­sipropil metakrilata) (p(NIPAM-HPMet)) prisutne su nove apsorpcione trake, a nisu prisutne pojedine trake karakteristične za monomere, što ukazuje na izvršenu kopolimerizaciju. SEM mikrografije pokazuju poroznu površinu ksero­gelova. Svojstva pri bubrenju svih sintetisanih hidrogelova praćena su na temperaturama od 20 do 40°C. Najveću sposobnost bubrenja pokazao je uzorak p(NIPAM-HPMet)-a sa najmanjim sadržajem umreživača na 20°C (α = 20,23). Sposobnost bubrenja opada pri povećanju sadržaja umreživača i temperature, tako da uzorci sa najvećim sadržajem umreživača (3 mol% EGDM-a) na 40°C dostižu stepen bubrenja od samo 2,05.",
publisher = "Univerzitet u Nišu - Tehnološki fakultet, Leskovac",
journal = "Savremene tehnologije",
title = "The effect of the cross-linker content on the swelling properties of intelligent gels, Efekat sadržaja umreživača na svojstva bubrenja inteligentnih gelova",
pages = "15-10",
number = "2",
volume = "3",
doi = "10.5937/savteh1402010I"
}

Ilić-Stojanović, S., Nikolić, L. B., Nikolić, V. D., Petrović, S., Zdravković, A. S.,& Stamenković, J.. (2014). The effect of the cross-linker content on the swelling properties of intelligent gels. in Savremene tehnologije
Univerzitet u Nišu - Tehnološki fakultet, Leskovac., 3(2), 10-15.
https://doi.org/10.5937/savteh1402010I

Ilić-Stojanović S, Nikolić LB, Nikolić VD, Petrović S, Zdravković AS, Stamenković J. The effect of the cross-linker content on the swelling properties of intelligent gels. in Savremene tehnologije. 2014;3(2):10-15.
doi:10.5937/savteh1402010I .

Ilić-Stojanović, Snežana, Nikolić, Ljubiša B., Nikolić, Vesna D., Petrović, Slobodan, Zdravković, Aleksandar S., Stamenković, Jakov, "The effect of the cross-linker content on the swelling properties of intelligent gels" in Savremene tehnologije, 3, no. 2 (2014):10-15,
https://doi.org/10.5937/savteh1402010I . .

TY  - JOUR
AU  - Ilić-Stojanović, Snežana
AU  - Nikolić, Ljubiša B.
AU  - Nikolić, Vesna D.
AU  - Milić, Jela R.
AU  - Stamenković, Jakov
AU  - Nikolić, Goran M.
AU  - Petrović, Slobodan
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2310
AB  - The method of the synthesis of poly(N-isopropylacrylamide-co-2-hydroxypropyl methacrylate) hydrogels obtained by radical polymerization is described. Their characterization was carried out by the determination of the quantity of residual monomers and by investigating their structure using FTIR. Three glass transitions were detected by DSC method. The porous surfaces of hydrogels with incorporated ibuprofen were shown in SEM micrographs. The swelling ratio of hydrogels decreased with the temperature increase and the swelling transport mechanism changed from non-Fickian to Fickian. Ibuprofen was incorporated in the hydrogel as a drug carrier and the released quantity depending on the temperature was monitored by HPLC. The hydrogel with the lower cross-linker content had the highest swelling degree (α = 34.72) at 10°C and released the largest amount of ibuprofen (64.21 mg/gxerogel) at 40C.
AB  - Prikazan je metod sinteze hidrogelova poli(N-izopropilakrilamid-ko-2-hidroksi-propilmetakrilata), p(NIPAM-ko-HPMet), sa 5 mol% monomera HPMet-a dobijenih radikalnom polimerizacijom. Karakterizacija sintetisanih hidrogelova je izvedena određivanjem količine rezidualnih monomera i izvršena je njihova strukturna analiza pomoću infracrvene spektroskopije (FTIR), diferencijalne skenirajuće kalorimetrije (DSC) i skenirajuće elektronske mikroskopije (SEM). FTIR spektri sintetisanih hidrogelova p(NIPAM-ko-HPMet)-a sa različitim sadržajem umreživača EGDM-a pokazuju uzajamnu sličnost u strukturi. Površinska struktura liofilizovanih hidrogelova je porozna i uočavaju se čestice uklopljenog ibuprofena. Termička svojstva kserogelova p(NIPAM-ko-HPMet)-a pokazuju tri staklasta prelaza sa endotermnim pikovima slabog intenziteta. Sadržaj rezidualnih monomera dovodi do zaključka da je konverzija monomera tokom sinteze gotovo kompletna. Kine-tika bubrenja hidrogelova pokazuje da se pri povećanju temperature od 20 na 40 °C mehanizam transporta tečnosti menja iz ne-Fikovog (proces bubrenja kontroliše difuzija tečnosti i relaksacija polimernih lanaca) u Fikov (kontrolisan samo difuzijom tečnosti). Mogućnost primene hidrogelova p(NIPAM-ko-HPMet)-a kao nosača lekova ispitivana je u zavisnosti od temperature. Ibuprofen, korišćen kao model lekovita supstanca, uklopljen je u hidrogel i količina oslobođene aktivne supstance određena je HPLC metodom. Utvrđeno je da uzorak hidrogela p(NIPAM-ko-HPMet)-a sa sadržajem umreživača od 1 mol% EGDM-a dostiže najveći stepen bubrenja (α = 34,72) na 10°C i otpušta najveću količinu ibuprofena na 40 °C (64,21 mg/gkserogel). Ispitana svojstva predstavljaju dobru osnovu za potencijalnu primenu hidrogelova kao nosača lekovitih supstanci sa modifikovanim oslobađanjem.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Synthesis and characterization of thermosensitive hydrogels and the investigation of modifiedrelease of ibuprofen
T1  - Sinteza i karakterizacija termoosetljivih hidrogelova i ispitivanje modifikovanog oslobađanja ibuprofena
EP  - 912
IS  - 6
SP  - 901
VL  - 67
DO  - 10.2298/HEMIND130119038I
ER  - 

@article{
author = "Ilić-Stojanović, Snežana and Nikolić, Ljubiša B. and Nikolić, Vesna D. and Milić, Jela R. and Stamenković, Jakov and Nikolić, Goran M. and Petrović, Slobodan",
year = "2013",
abstract = "The method of the synthesis of poly(N-isopropylacrylamide-co-2-hydroxypropyl methacrylate) hydrogels obtained by radical polymerization is described. Their characterization was carried out by the determination of the quantity of residual monomers and by investigating their structure using FTIR. Three glass transitions were detected by DSC method. The porous surfaces of hydrogels with incorporated ibuprofen were shown in SEM micrographs. The swelling ratio of hydrogels decreased with the temperature increase and the swelling transport mechanism changed from non-Fickian to Fickian. Ibuprofen was incorporated in the hydrogel as a drug carrier and the released quantity depending on the temperature was monitored by HPLC. The hydrogel with the lower cross-linker content had the highest swelling degree (α = 34.72) at 10°C and released the largest amount of ibuprofen (64.21 mg/gxerogel) at 40C., Prikazan je metod sinteze hidrogelova poli(N-izopropilakrilamid-ko-2-hidroksi-propilmetakrilata), p(NIPAM-ko-HPMet), sa 5 mol% monomera HPMet-a dobijenih radikalnom polimerizacijom. Karakterizacija sintetisanih hidrogelova je izvedena određivanjem količine rezidualnih monomera i izvršena je njihova strukturna analiza pomoću infracrvene spektroskopije (FTIR), diferencijalne skenirajuće kalorimetrije (DSC) i skenirajuće elektronske mikroskopije (SEM). FTIR spektri sintetisanih hidrogelova p(NIPAM-ko-HPMet)-a sa različitim sadržajem umreživača EGDM-a pokazuju uzajamnu sličnost u strukturi. Površinska struktura liofilizovanih hidrogelova je porozna i uočavaju se čestice uklopljenog ibuprofena. Termička svojstva kserogelova p(NIPAM-ko-HPMet)-a pokazuju tri staklasta prelaza sa endotermnim pikovima slabog intenziteta. Sadržaj rezidualnih monomera dovodi do zaključka da je konverzija monomera tokom sinteze gotovo kompletna. Kine-tika bubrenja hidrogelova pokazuje da se pri povećanju temperature od 20 na 40 °C mehanizam transporta tečnosti menja iz ne-Fikovog (proces bubrenja kontroliše difuzija tečnosti i relaksacija polimernih lanaca) u Fikov (kontrolisan samo difuzijom tečnosti). Mogućnost primene hidrogelova p(NIPAM-ko-HPMet)-a kao nosača lekova ispitivana je u zavisnosti od temperature. Ibuprofen, korišćen kao model lekovita supstanca, uklopljen je u hidrogel i količina oslobođene aktivne supstance određena je HPLC metodom. Utvrđeno je da uzorak hidrogela p(NIPAM-ko-HPMet)-a sa sadržajem umreživača od 1 mol% EGDM-a dostiže najveći stepen bubrenja (α = 34,72) na 10°C i otpušta najveću količinu ibuprofena na 40 °C (64,21 mg/gkserogel). Ispitana svojstva predstavljaju dobru osnovu za potencijalnu primenu hidrogelova kao nosača lekovitih supstanci sa modifikovanim oslobađanjem.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Synthesis and characterization of thermosensitive hydrogels and the investigation of modifiedrelease of ibuprofen, Sinteza i karakterizacija termoosetljivih hidrogelova i ispitivanje modifikovanog oslobađanja ibuprofena",
pages = "912-901",
number = "6",
volume = "67",
doi = "10.2298/HEMIND130119038I"
}

Ilić-Stojanović, S., Nikolić, L. B., Nikolić, V. D., Milić, J. R., Stamenković, J., Nikolić, G. M.,& Petrović, S.. (2013). Synthesis and characterization of thermosensitive hydrogels and the investigation of modifiedrelease of ibuprofen. in Hemijska industrija
Association of Chemical Engineers of Serbia., 67(6), 901-912.
https://doi.org/10.2298/HEMIND130119038I

Ilić-Stojanović S, Nikolić LB, Nikolić VD, Milić JR, Stamenković J, Nikolić GM, Petrović S. Synthesis and characterization of thermosensitive hydrogels and the investigation of modifiedrelease of ibuprofen. in Hemijska industrija. 2013;67(6):901-912.
doi:10.2298/HEMIND130119038I .

Ilić-Stojanović, Snežana, Nikolić, Ljubiša B., Nikolić, Vesna D., Milić, Jela R., Stamenković, Jakov, Nikolić, Goran M., Petrović, Slobodan, "Synthesis and characterization of thermosensitive hydrogels and the investigation of modifiedrelease of ibuprofen" in Hemijska industrija, 67, no. 6 (2013):901-912,
https://doi.org/10.2298/HEMIND130119038I . .

TY  - JOUR
AU  - Ilić-Stojanović, Snežana
AU  - Nikolić, Ljubiša B.
AU  - Nikolić, Vesna
AU  - Stanković, Mihajlo
AU  - Stamenković, Jakov
AU  - Mladenović-Ranisavljević, Ivana
AU  - Petrović, Slobodan
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2069
AB  - The synthesis of the poly(N-isopropylacrylamide-co-2-hydroxypropyl-methacrylate) hydrogel along with the analysis of the residual monomers content and influence of monomer and crosslinker molar ratios on the swelling behaviour was investigated. Synthesis of thermosensitive hydrogel based on N-isopropylacrylamide was carried out with the molar ratios of 5, 10, 15 and 20 mol% of monomer 2-hydroxypropyl-methacrylate, in the presence of ethylene glycol dimethacrylate as a crosslinker (1, 1.5, 2 and 3 mol%) and 2,2'-azobis(2-methylpropionitrile) as an initiator in acetone. The quantities of residual monomers in the synthesized copolymers were determined by HPLC method, ranging from 0.19 to 0.49% for N-isopropylacrylamide and from 0.13 to 0.63% for 2- -hydroxypropyl-methacrylate, counting the amount of xerogel. The hydrogels swelling ratio depending on time at 20 and 40°C was examined. It was found that the hydrogel with 5 mol% 2-hydroxypropyl-methacrylate and 1 mol% ethylene glycol dimethacrylate had the highest degree of swelling (( = 29.59) at 20°C, and that the hydrogel with 20 mol% 2-hydroxypropyl-methacrylate and 3 mol% ethylene glycol dimethacrylate had the lowest swelling degree ((=2.17) at 40°C.
AB  - Predmet ovog rada je sinteza kopolimernog hidrogela poli(N-izopropilakrilamid-ko-2-hidroksipropilmetakrilata), analiza sadržaja rezidualnih monomera i ispitivanje uticaja molskog odnosa monomera i umreživača na karakteristike bubrenja. Sinteza termoosetljivog hidrogela na bazi N-izopropilakrilamida izvršena je sa molarnim udelom 5, 10, 15 i 20 mol% monomera 2-hidroksipropilmetakrilata, u prisustvu umreživača etilenglikoldimetakrilata (u koncentraciji: 1, 1,5 , 2 i 3 mol%) i inicijatora 2,2'-azobis(2-metilpropionitrila) u acetonu. Sadržaj zaostalih monomera u sintetizovanim kopolimerima analiziran je pomoću HPLC metode. Vrednosti se nalaze u granicama od 0,19 do 0,49% za N-izopropilakrilamid i od 0,13 do 0,63% za 2-hidroksipropilmetakrilat računajući na količinu kserogela. Ispitan je stepen bubrenja dobijenih hidrogelova u zavisnosti od temperature. Najveći stepen bubrenja (( = 29,59) pri konstantnoj temperaturi od 20°C dostigao je uzorak hidrogela sa 5 mol% 2-hidroksipropilmetakrilata i 1 mol% umreživača EGDM-a, a najmanji (( = 2.17) pri temperaturi od 40°C dostigao je uzorak hidrogela sa 20 mol% 2-hidroksipropilmetakrilata i 3 mol% umreživača EGDM-a. PR Projekat Ministarstva nauke Republike Srbije, br. TR 34012.
PB  - Association of the Chemical Engineers of Serbia
T2  - Chemical Industry & Chemical Engineering Quarterly
T1  - Influence of monomer and crosslinker molar ratio on the swelling behaviour of thermosensitive hydrogels
T1  - Uticaj molarnog odnosa monomera i umreživača na karakteristike bubrenja termoosetljivih hidrogelova
EP  - 9
IS  - 1
SP  - 1
VL  - 18
DO  - 10.2298/CICEQ110711040I
ER  - 

@article{
author = "Ilić-Stojanović, Snežana and Nikolić, Ljubiša B. and Nikolić, Vesna and Stanković, Mihajlo and Stamenković, Jakov and Mladenović-Ranisavljević, Ivana and Petrović, Slobodan",
year = "2012",
abstract = "The synthesis of the poly(N-isopropylacrylamide-co-2-hydroxypropyl-methacrylate) hydrogel along with the analysis of the residual monomers content and influence of monomer and crosslinker molar ratios on the swelling behaviour was investigated. Synthesis of thermosensitive hydrogel based on N-isopropylacrylamide was carried out with the molar ratios of 5, 10, 15 and 20 mol% of monomer 2-hydroxypropyl-methacrylate, in the presence of ethylene glycol dimethacrylate as a crosslinker (1, 1.5, 2 and 3 mol%) and 2,2'-azobis(2-methylpropionitrile) as an initiator in acetone. The quantities of residual monomers in the synthesized copolymers were determined by HPLC method, ranging from 0.19 to 0.49% for N-isopropylacrylamide and from 0.13 to 0.63% for 2- -hydroxypropyl-methacrylate, counting the amount of xerogel. The hydrogels swelling ratio depending on time at 20 and 40°C was examined. It was found that the hydrogel with 5 mol% 2-hydroxypropyl-methacrylate and 1 mol% ethylene glycol dimethacrylate had the highest degree of swelling (( = 29.59) at 20°C, and that the hydrogel with 20 mol% 2-hydroxypropyl-methacrylate and 3 mol% ethylene glycol dimethacrylate had the lowest swelling degree ((=2.17) at 40°C., Predmet ovog rada je sinteza kopolimernog hidrogela poli(N-izopropilakrilamid-ko-2-hidroksipropilmetakrilata), analiza sadržaja rezidualnih monomera i ispitivanje uticaja molskog odnosa monomera i umreživača na karakteristike bubrenja. Sinteza termoosetljivog hidrogela na bazi N-izopropilakrilamida izvršena je sa molarnim udelom 5, 10, 15 i 20 mol% monomera 2-hidroksipropilmetakrilata, u prisustvu umreživača etilenglikoldimetakrilata (u koncentraciji: 1, 1,5 , 2 i 3 mol%) i inicijatora 2,2'-azobis(2-metilpropionitrila) u acetonu. Sadržaj zaostalih monomera u sintetizovanim kopolimerima analiziran je pomoću HPLC metode. Vrednosti se nalaze u granicama od 0,19 do 0,49% za N-izopropilakrilamid i od 0,13 do 0,63% za 2-hidroksipropilmetakrilat računajući na količinu kserogela. Ispitan je stepen bubrenja dobijenih hidrogelova u zavisnosti od temperature. Najveći stepen bubrenja (( = 29,59) pri konstantnoj temperaturi od 20°C dostigao je uzorak hidrogela sa 5 mol% 2-hidroksipropilmetakrilata i 1 mol% umreživača EGDM-a, a najmanji (( = 2.17) pri temperaturi od 40°C dostigao je uzorak hidrogela sa 20 mol% 2-hidroksipropilmetakrilata i 3 mol% umreživača EGDM-a. PR Projekat Ministarstva nauke Republike Srbije, br. TR 34012.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Chemical Industry & Chemical Engineering Quarterly",
title = "Influence of monomer and crosslinker molar ratio on the swelling behaviour of thermosensitive hydrogels, Uticaj molarnog odnosa monomera i umreživača na karakteristike bubrenja termoosetljivih hidrogelova",
pages = "9-1",
number = "1",
volume = "18",
doi = "10.2298/CICEQ110711040I"
}

Ilić-Stojanović, S., Nikolić, L. B., Nikolić, V., Stanković, M., Stamenković, J., Mladenović-Ranisavljević, I.,& Petrović, S.. (2012). Influence of monomer and crosslinker molar ratio on the swelling behaviour of thermosensitive hydrogels. in Chemical Industry & Chemical Engineering Quarterly
Association of the Chemical Engineers of Serbia., 18(1), 1-9.
https://doi.org/10.2298/CICEQ110711040I

Ilić-Stojanović S, Nikolić LB, Nikolić V, Stanković M, Stamenković J, Mladenović-Ranisavljević I, Petrović S. Influence of monomer and crosslinker molar ratio on the swelling behaviour of thermosensitive hydrogels. in Chemical Industry & Chemical Engineering Quarterly. 2012;18(1):1-9.
doi:10.2298/CICEQ110711040I .

Ilić-Stojanović, Snežana, Nikolić, Ljubiša B., Nikolić, Vesna, Stanković, Mihajlo, Stamenković, Jakov, Mladenović-Ranisavljević, Ivana, Petrović, Slobodan, "Influence of monomer and crosslinker molar ratio on the swelling behaviour of thermosensitive hydrogels" in Chemical Industry & Chemical Engineering Quarterly, 18, no. 1 (2012):1-9,
https://doi.org/10.2298/CICEQ110711040I . .