TY  - JOUR
AU  - Brajović, Ljiljana
AU  - Stojanović, Dušica
AU  - Mihailović, Peđa
AU  - Marković, Smilja
AU  - Romčević, Maja J.
AU  - Mitrić, Miodrag
AU  - Lazović, Vladimir M.
AU  - Dramlić, Dragan
AU  - Petricević, Slobodan
AU  - Romčević, Nebojša Ž.
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3669
AB  - Bismuth germanium oxide Bi12GeO20 (BGO) has very interesting electrical, optical and magnetic properties. In order to make devices based on this material more flexible, its powder was used for preparing polymer composites. This study reports investigation of the effects of using different solvents and polymers in preparation of BGO composite on the microstructural and optical behaviour of the resulting material. Preparation of such composites by a solution casting method is described. Poly (methyl methacrylate) (PMMA) and polystyrene (PS)) were used as matrix materials and acetone and chloroform as solvents. Their microstructure and the quality of BGO dispersion and deaggregation in polymer matrix were analyzed by SEM, Raman, XRD and optical spectroscopy. The influence of particle size distribution, their shapes, and concentration on the optical transmission is calculated based on Mie scattering theory and discussed, too.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Preparation and characterization of bismuth germanium oxide (BGO) polymer composites
EP  - 849
SP  - 841
VL  - 695
DO  - 10.1016/j.jallcom.2016.10.140
ER  - 

@article{
author = "Brajović, Ljiljana and Stojanović, Dušica and Mihailović, Peđa and Marković, Smilja and Romčević, Maja J. and Mitrić, Miodrag and Lazović, Vladimir M. and Dramlić, Dragan and Petricević, Slobodan and Romčević, Nebojša Ž.",
year = "2017",
abstract = "Bismuth germanium oxide Bi12GeO20 (BGO) has very interesting electrical, optical and magnetic properties. In order to make devices based on this material more flexible, its powder was used for preparing polymer composites. This study reports investigation of the effects of using different solvents and polymers in preparation of BGO composite on the microstructural and optical behaviour of the resulting material. Preparation of such composites by a solution casting method is described. Poly (methyl methacrylate) (PMMA) and polystyrene (PS)) were used as matrix materials and acetone and chloroform as solvents. Their microstructure and the quality of BGO dispersion and deaggregation in polymer matrix were analyzed by SEM, Raman, XRD and optical spectroscopy. The influence of particle size distribution, their shapes, and concentration on the optical transmission is calculated based on Mie scattering theory and discussed, too.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites",
pages = "849-841",
volume = "695",
doi = "10.1016/j.jallcom.2016.10.140"
}

Brajović, L., Stojanović, D., Mihailović, P., Marković, S., Romčević, M. J., Mitrić, M., Lazović, V. M., Dramlić, D., Petricević, S.,& Romčević, N. Ž.. (2017). Preparation and characterization of bismuth germanium oxide (BGO) polymer composites. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 695, 841-849.
https://doi.org/10.1016/j.jallcom.2016.10.140

Brajović L, Stojanović D, Mihailović P, Marković S, Romčević MJ, Mitrić M, Lazović VM, Dramlić D, Petricević S, Romčević NŽ. Preparation and characterization of bismuth germanium oxide (BGO) polymer composites. in Journal of Alloys and Compounds. 2017;695:841-849.
doi:10.1016/j.jallcom.2016.10.140 .

Brajović, Ljiljana, Stojanović, Dušica, Mihailović, Peđa, Marković, Smilja, Romčević, Maja J., Mitrić, Miodrag, Lazović, Vladimir M., Dramlić, Dragan, Petricević, Slobodan, Romčević, Nebojša Ž., "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites" in Journal of Alloys and Compounds, 695 (2017):841-849,
https://doi.org/10.1016/j.jallcom.2016.10.140 . .

TY  - JOUR
AU  - Petrović, Miloš
AU  - Mihailović, Peđa
AU  - Brajović, Ljiljana
AU  - Petricević, Slobodan
AU  - Živković, Irena
AU  - Kojović, Aleksandar
AU  - Radojević, Vesna
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3471
AB  - In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers were subjected to impact using high-speed puncture impact tester as a calibration device. Transfer function of the sensor was generated by linking the light intensity modulation depth with the impact force and the impact point to fiber distance. Conditions for transfer function validity were presented. To detect any possible dangerous impact, a net of crossed fibers was proposed and the net spacing for the given material was calculated. Appropriate non-damaging calibration procedure was proposed, as well as the algorithm for locating the impact point. The method for calculating the impact force, the projectile momentum change, and the place of impact was verified by consecutive strikes on the previously calibrated sample. The sensor can also provide information on the time of the impact and an alarm signal if the force exceeds the damaging threshold force.
PB  - IEEE-Inst Electrical Electronics Engineers Inc, Piscataway
T2  - IEEE Sensors Journal
T1  - Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
EP  - 3053
IS  - 9
SP  - 3047
VL  - 16
DO  - 10.1109/JSEN.2016.2524045
ER  - 

@article{
author = "Petrović, Miloš and Mihailović, Peđa and Brajović, Ljiljana and Petricević, Slobodan and Živković, Irena and Kojović, Aleksandar and Radojević, Vesna",
year = "2016",
abstract = "In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers were subjected to impact using high-speed puncture impact tester as a calibration device. Transfer function of the sensor was generated by linking the light intensity modulation depth with the impact force and the impact point to fiber distance. Conditions for transfer function validity were presented. To detect any possible dangerous impact, a net of crossed fibers was proposed and the net spacing for the given material was calculated. Appropriate non-damaging calibration procedure was proposed, as well as the algorithm for locating the impact point. The method for calculating the impact force, the projectile momentum change, and the place of impact was verified by consecutive strikes on the previously calibrated sample. The sensor can also provide information on the time of the impact and an alarm signal if the force exceeds the damaging threshold force.",
publisher = "IEEE-Inst Electrical Electronics Engineers Inc, Piscataway",
journal = "IEEE Sensors Journal",
title = "Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester",
pages = "3053-3047",
number = "9",
volume = "16",
doi = "10.1109/JSEN.2016.2524045"
}

Petrović, M., Mihailović, P., Brajović, L., Petricević, S., Živković, I., Kojović, A.,& Radojević, V.. (2016). Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester. in IEEE Sensors Journal
IEEE-Inst Electrical Electronics Engineers Inc, Piscataway., 16(9), 3047-3053.
https://doi.org/10.1109/JSEN.2016.2524045

Petrović M, Mihailović P, Brajović L, Petricević S, Živković I, Kojović A, Radojević V. Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester. in IEEE Sensors Journal. 2016;16(9):3047-3053.
doi:10.1109/JSEN.2016.2524045 .

Petrović, Miloš, Mihailović, Peđa, Brajović, Ljiljana, Petricević, Slobodan, Živković, Irena, Kojović, Aleksandar, Radojević, Vesna, "Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester" in IEEE Sensors Journal, 16, no. 9 (2016):3047-3053,
https://doi.org/10.1109/JSEN.2016.2524045 . .