TY  - JOUR
AU  - Ćirić, Radovan
AU  - Čantrak, Svetislav
AU  - Raić, Karlo T.
AU  - Rudolf, Rebeka
AU  - Anžel, Ivan
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5555
AB  - The paper presents the viscoplastic phenomena observed during the rotational friction-welding process of high-speed steel M2 (AISI SAE) with carbon steel 1060 (AISI SAE The structure, phase composition and distribution of the carbide phase in the friction plane and adjoining zones are examined by using optical microscopy (OM) with a system for quantitative analysis, and scanning electron microscopy (SEM) in addition to EDS analysis. The experimentally-checked mathematical relationship is suggested for the calculation of the radial movements of the carbide phase, immediately next to the friction plane. On the basis of qualitative and quantitative evaluation of the microstructural and rheological appearances, a model of carbide phase distribution is also established in the viscoplastic and viscous layers in the area of the friction plane.
PB  - Korean Institute of Metals and Materials
T2  - Metals and Materials International
T1  - Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels
EP  - 841
IS  - 5
SP  - 831
VL  - 15
DO  - 10.1007/s12540-009-0831-4
ER  - 

@article{
author = "Ćirić, Radovan and Čantrak, Svetislav and Raić, Karlo T. and Rudolf, Rebeka and Anžel, Ivan",
year = "2009",
abstract = "The paper presents the viscoplastic phenomena observed during the rotational friction-welding process of high-speed steel M2 (AISI SAE) with carbon steel 1060 (AISI SAE The structure, phase composition and distribution of the carbide phase in the friction plane and adjoining zones are examined by using optical microscopy (OM) with a system for quantitative analysis, and scanning electron microscopy (SEM) in addition to EDS analysis. The experimentally-checked mathematical relationship is suggested for the calculation of the radial movements of the carbide phase, immediately next to the friction plane. On the basis of qualitative and quantitative evaluation of the microstructural and rheological appearances, a model of carbide phase distribution is also established in the viscoplastic and viscous layers in the area of the friction plane.",
publisher = "Korean Institute of Metals and Materials",
journal = "Metals and Materials International",
title = "Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels",
pages = "841-831",
number = "5",
volume = "15",
doi = "10.1007/s12540-009-0831-4"
}

Ćirić, R., Čantrak, S., Raić, K. T., Rudolf, R.,& Anžel, I.. (2009). Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels. in Metals and Materials International
Korean Institute of Metals and Materials., 15(5), 831-841.
https://doi.org/10.1007/s12540-009-0831-4

Ćirić R, Čantrak S, Raić KT, Rudolf R, Anžel I. Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels. in Metals and Materials International. 2009;15(5):831-841.
doi:10.1007/s12540-009-0831-4 .

Ćirić, Radovan, Čantrak, Svetislav, Raić, Karlo T., Rudolf, Rebeka, Anžel, Ivan, "Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels" in Metals and Materials International, 15, no. 5 (2009):831-841,
https://doi.org/10.1007/s12540-009-0831-4 . .

TY  - JOUR
AU  - Ćirić, Radovan
AU  - Marković, Svetislav
AU  - Radović, Nenad
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/467
AB  - The aim of this work was to determine the influence of welding heat input on hardness distribution after SURFACING of two quench+temper steels. The results indicate that variation of heat input can partially provide required hardness distribution in heat affected zone.
AB  - U radu je prikazan uticaj pogonske energije zavarivanja na raspodelu tvrdoće u ZUT pri navarivanju dva čelika za poboljšanje. Utvrđeno je da se variranjem nivoa pogonske energije navarivanja može u znatnoj, ali ne i dovoljnoj meri, obezbediti dobijanje željene raspodele tvrdoće u ZUT.
PB  - DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd
T2  - Zavarivanje i zavarene konstrukcije
T1  - Influence of heat input on HAZ hardness distribution after surfacing two Q+T steels
T1  - Uticaj pogonske energije zavarivanja na raspodelu tvrdoće u ZUT pri navarivanju čelika za poboljšanje
EP  - 234
IS  - 4
SP  - 231
VL  - 47
UR  - https://hdl.handle.net/21.15107/rcub_technorep_467
ER  - 

@article{
author = "Ćirić, Radovan and Marković, Svetislav and Radović, Nenad",
year = "2002",
abstract = "The aim of this work was to determine the influence of welding heat input on hardness distribution after SURFACING of two quench+temper steels. The results indicate that variation of heat input can partially provide required hardness distribution in heat affected zone., U radu je prikazan uticaj pogonske energije zavarivanja na raspodelu tvrdoće u ZUT pri navarivanju dva čelika za poboljšanje. Utvrđeno je da se variranjem nivoa pogonske energije navarivanja može u znatnoj, ali ne i dovoljnoj meri, obezbediti dobijanje željene raspodele tvrdoće u ZUT.",
publisher = "DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd",
journal = "Zavarivanje i zavarene konstrukcije",
title = "Influence of heat input on HAZ hardness distribution after surfacing two Q+T steels, Uticaj pogonske energije zavarivanja na raspodelu tvrdoće u ZUT pri navarivanju čelika za poboljšanje",
pages = "234-231",
number = "4",
volume = "47",
url = "https://hdl.handle.net/21.15107/rcub_technorep_467"
}

Ćirić, R., Marković, S.,& Radović, N.. (2002). Influence of heat input on HAZ hardness distribution after surfacing two Q+T steels. in Zavarivanje i zavarene konstrukcije
DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd., 47(4), 231-234.
https://hdl.handle.net/21.15107/rcub_technorep_467

Ćirić R, Marković S, Radović N. Influence of heat input on HAZ hardness distribution after surfacing two Q+T steels. in Zavarivanje i zavarene konstrukcije. 2002;47(4):231-234.
https://hdl.handle.net/21.15107/rcub_technorep_467 .

Ćirić, Radovan, Marković, Svetislav, Radović, Nenad, "Influence of heat input on HAZ hardness distribution after surfacing two Q+T steels" in Zavarivanje i zavarene konstrukcije, 47, no. 4 (2002):231-234,
https://hdl.handle.net/21.15107/rcub_technorep_467 .