Zdravković, Jelena

Link to this page

Authority KeyName Variants
b3f6b1d8-d394-4cbc-b0c8-837da1a30d58
  • Zdravković, Jelena (3)
  • Zdravković, Jelena D. (1)

Author's Bibliography

Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles – Principal Component Analysis

Vasić, Milica V.; Pezo, Lato L.; Zdravković, Jelena D.; Vrebalov, Marija; Radojević, Zagorka

(International Institute for the Science of Sintering, 2018)

TY  - JOUR
AU  - Vasić, Milica V.
AU  - Pezo, Lato L.
AU  - Zdravković, Jelena D.
AU  - Vrebalov, Marija
AU  - Radojević, Zagorka
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5091
AB  - This research describes a study of 11 selected samples of brick clays applied in roofing tile production, by using simultaneous thermal analysis. Additionally, the laboratory-sized samples were prepared and fired (850-950 °C) and technological properties were determined. Mathematical analysis was applied to sum all the experimental results and help discriminate the samples by their behavior during firing. The samples, very similar according to mineralogical and chemical content, as well as granulometry tests, were successfully grouped using principal component analysis (PCA). The PCA was used to explore and easily visualize the differences between samples. The PCA performed for differential thermal analysis (DTA), differential scanning calorimetry (DSC) and differential thermogravimetry (DTG) curves clearly showed that the heat flow was mainly influenced by carbonate content and its grain size, while DTG discriminated samples according to the contents of clay minerals and carbonates. In addition, dilatometry analysis revealed which samples underwent the highest densification during the firing process. The PCA analysis of fired products properties showed that the highest correlations were between water absorption with firing shrinkage and compressive strength.
PB  - International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles – Principal Component Analysis
EP  - 500
IS  - 4
SP  - 487
VL  - 50
DO  - 10.2298/SOS1804487V
ER  - 
@article{
author = "Vasić, Milica V. and Pezo, Lato L. and Zdravković, Jelena D. and Vrebalov, Marija and Radojević, Zagorka",
year = "2018",
abstract = "This research describes a study of 11 selected samples of brick clays applied in roofing tile production, by using simultaneous thermal analysis. Additionally, the laboratory-sized samples were prepared and fired (850-950 °C) and technological properties were determined. Mathematical analysis was applied to sum all the experimental results and help discriminate the samples by their behavior during firing. The samples, very similar according to mineralogical and chemical content, as well as granulometry tests, were successfully grouped using principal component analysis (PCA). The PCA was used to explore and easily visualize the differences between samples. The PCA performed for differential thermal analysis (DTA), differential scanning calorimetry (DSC) and differential thermogravimetry (DTG) curves clearly showed that the heat flow was mainly influenced by carbonate content and its grain size, while DTG discriminated samples according to the contents of clay minerals and carbonates. In addition, dilatometry analysis revealed which samples underwent the highest densification during the firing process. The PCA analysis of fired products properties showed that the highest correlations were between water absorption with firing shrinkage and compressive strength.",
publisher = "International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles – Principal Component Analysis",
pages = "500-487",
number = "4",
volume = "50",
doi = "10.2298/SOS1804487V"
}
Vasić, M. V., Pezo, L. L., Zdravković, J. D., Vrebalov, M.,& Radojević, Z.. (2018). Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles – Principal Component Analysis. in Science of Sintering
International Institute for the Science of Sintering., 50(4), 487-500.
https://doi.org/10.2298/SOS1804487V
Vasić MV, Pezo LL, Zdravković JD, Vrebalov M, Radojević Z. Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles – Principal Component Analysis. in Science of Sintering. 2018;50(4):487-500.
doi:10.2298/SOS1804487V .
Vasić, Milica V., Pezo, Lato L., Zdravković, Jelena D., Vrebalov, Marija, Radojević, Zagorka, "Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles – Principal Component Analysis" in Science of Sintering, 50, no. 4 (2018):487-500,
https://doi.org/10.2298/SOS1804487V . .
9
6
13

ZnO nanopowders obtained by thermolysis of zinc benzenedicarboxylate complexes with 2,2’-dipyridylamine

Zdravković, Jelena; Radovanović, Lidija; Simović, Bojana; Poleti, Dejan; Rogan, Jelena; Radovanović, Željko; Mihajlovski, Katarina

(Belgrade : Institute for Multidisciplinary Research, University, 2017)

TY  - CONF
AU  - Zdravković, Jelena
AU  - Radovanović, Lidija
AU  - Simović, Bojana
AU  - Poleti, Dejan
AU  - Rogan, Jelena
AU  - Radovanović, Željko
AU  - Mihajlovski, Katarina
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6157
AB  - Coordination chemistry provides the know-how for the synthesis of the
precursor compounds with variable composition and structures, while the thermal
induced changes may control the crystalline structure, phase composition,
morphology, size, texture, and other properties of their pyrolytic products [1]. In
terms of coordination chemistry and thermal analysis, our research has been focused
on the synthesis of mixed ligand complexes [2] that can be used as precursors for
obtaining diverse (compositional and structural) oxides, depending on their
thermoreactivity.
The main goal of this approach was the reduction of the temperature at which
the oxides are formed (up to 600–700 °C) comparative to the standard ceramic
methods. The effect of the different atmospheres (dynamic air or N2) on the thermal
decomposition of Zn benzenedicarboxylate complexes with 2,2’-dipyridylamine was
investigated. The formation of ZnO nanopowders was identified using XRPD and
FESEM techniques. The influence of the adopted architecture of ternary metal
complexes used as templates for ZnO nanopowders was discussed. The thermal
decomposition kinetics of precursors was studied under non-isothermal conditions.
In addition, the antibacterial activity of obtained ZnO nanopowders was also
analyzed.
PB  - Belgrade : Institute for Multidisciplinary Research, University
C3  - Programme and the Book of Abstracts / 4th Conference of The Serbian Society for Ceramic Materials, 4CSCS-2017, June 14-16, 2017, Belgrade, Serbia
T1  - ZnO nanopowders obtained by thermolysis of zinc benzenedicarboxylate complexes with 2,2’-dipyridylamine
SP  - 79
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6157
ER  - 
@conference{
author = "Zdravković, Jelena and Radovanović, Lidija and Simović, Bojana and Poleti, Dejan and Rogan, Jelena and Radovanović, Željko and Mihajlovski, Katarina",
year = "2017",
abstract = "Coordination chemistry provides the know-how for the synthesis of the
precursor compounds with variable composition and structures, while the thermal
induced changes may control the crystalline structure, phase composition,
morphology, size, texture, and other properties of their pyrolytic products [1]. In
terms of coordination chemistry and thermal analysis, our research has been focused
on the synthesis of mixed ligand complexes [2] that can be used as precursors for
obtaining diverse (compositional and structural) oxides, depending on their
thermoreactivity.
The main goal of this approach was the reduction of the temperature at which
the oxides are formed (up to 600–700 °C) comparative to the standard ceramic
methods. The effect of the different atmospheres (dynamic air or N2) on the thermal
decomposition of Zn benzenedicarboxylate complexes with 2,2’-dipyridylamine was
investigated. The formation of ZnO nanopowders was identified using XRPD and
FESEM techniques. The influence of the adopted architecture of ternary metal
complexes used as templates for ZnO nanopowders was discussed. The thermal
decomposition kinetics of precursors was studied under non-isothermal conditions.
In addition, the antibacterial activity of obtained ZnO nanopowders was also
analyzed.",
publisher = "Belgrade : Institute for Multidisciplinary Research, University",
journal = "Programme and the Book of Abstracts / 4th Conference of The Serbian Society for Ceramic Materials, 4CSCS-2017, June 14-16, 2017, Belgrade, Serbia",
title = "ZnO nanopowders obtained by thermolysis of zinc benzenedicarboxylate complexes with 2,2’-dipyridylamine",
pages = "79",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6157"
}
Zdravković, J., Radovanović, L., Simović, B., Poleti, D., Rogan, J., Radovanović, Ž.,& Mihajlovski, K.. (2017). ZnO nanopowders obtained by thermolysis of zinc benzenedicarboxylate complexes with 2,2’-dipyridylamine. in Programme and the Book of Abstracts / 4th Conference of The Serbian Society for Ceramic Materials, 4CSCS-2017, June 14-16, 2017, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research, University., 79.
https://hdl.handle.net/21.15107/rcub_technorep_6157
Zdravković J, Radovanović L, Simović B, Poleti D, Rogan J, Radovanović Ž, Mihajlovski K. ZnO nanopowders obtained by thermolysis of zinc benzenedicarboxylate complexes with 2,2’-dipyridylamine. in Programme and the Book of Abstracts / 4th Conference of The Serbian Society for Ceramic Materials, 4CSCS-2017, June 14-16, 2017, Belgrade, Serbia. 2017;:79.
https://hdl.handle.net/21.15107/rcub_technorep_6157 .
Zdravković, Jelena, Radovanović, Lidija, Simović, Bojana, Poleti, Dejan, Rogan, Jelena, Radovanović, Željko, Mihajlovski, Katarina, "ZnO nanopowders obtained by thermolysis of zinc benzenedicarboxylate complexes with 2,2’-dipyridylamine" in Programme and the Book of Abstracts / 4th Conference of The Serbian Society for Ceramic Materials, 4CSCS-2017, June 14-16, 2017, Belgrade, Serbia (2017):79,
https://hdl.handle.net/21.15107/rcub_technorep_6157 .

The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve

Vasić, Milica; Pezo, Lato; Zdravković, Jelena; Backalić, Z.; Radojević, Zagorka

(Elsevier Sci Ltd, Oxford, 2017)

TY  - JOUR
AU  - Vasić, Milica
AU  - Pezo, Lato
AU  - Zdravković, Jelena
AU  - Backalić, Z.
AU  - Radojević, Zagorka
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5857
AB  - The aim of this study was to test montmorillonite and hydromica type of brick clays by using simultaneous thermal analysis and dilatometry in an assessment of the suitability of brick clays to produce building elements. The plasticity coefficient and drying susceptibility were determined to discover the behavior of brick clays. Fired products' characteristics were studied by performing water absorption and compressive strength tests. All the methods were employed in the construction of the firing curves in a tunnel kiln. The results could increase the degree of certainty to lead the production process towards obtaining the desired features of brick elements.
PB  - Elsevier Sci Ltd, Oxford
T2  - Construction and Building Materials
T1  - The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve
EP  - 879
SP  - 872
VL  - 150
DO  - 10.1016/j.conbuildmat.2017.06.068
ER  - 
@article{
author = "Vasić, Milica and Pezo, Lato and Zdravković, Jelena and Backalić, Z. and Radojević, Zagorka",
year = "2017",
abstract = "The aim of this study was to test montmorillonite and hydromica type of brick clays by using simultaneous thermal analysis and dilatometry in an assessment of the suitability of brick clays to produce building elements. The plasticity coefficient and drying susceptibility were determined to discover the behavior of brick clays. Fired products' characteristics were studied by performing water absorption and compressive strength tests. All the methods were employed in the construction of the firing curves in a tunnel kiln. The results could increase the degree of certainty to lead the production process towards obtaining the desired features of brick elements.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Construction and Building Materials",
title = "The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve",
pages = "879-872",
volume = "150",
doi = "10.1016/j.conbuildmat.2017.06.068"
}
Vasić, M., Pezo, L., Zdravković, J., Backalić, Z.,& Radojević, Z.. (2017). The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve. in Construction and Building Materials
Elsevier Sci Ltd, Oxford., 150, 872-879.
https://doi.org/10.1016/j.conbuildmat.2017.06.068
Vasić M, Pezo L, Zdravković J, Backalić Z, Radojević Z. The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve. in Construction and Building Materials. 2017;150:872-879.
doi:10.1016/j.conbuildmat.2017.06.068 .
Vasić, Milica, Pezo, Lato, Zdravković, Jelena, Backalić, Z., Radojević, Zagorka, "The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve" in Construction and Building Materials, 150 (2017):872-879,
https://doi.org/10.1016/j.conbuildmat.2017.06.068 . .
24
13
23

Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors

Zdravković, Jelena; Simović, Bojana; Golubović, Aleksandar; Poleti, Dejan; Veljković, Ivana; Šćepanović, Maja; Branković, Goran

(Elsevier Sci Ltd, Oxford, 2015)

TY  - JOUR
AU  - Zdravković, Jelena
AU  - Simović, Bojana
AU  - Golubović, Aleksandar
AU  - Poleti, Dejan
AU  - Veljković, Ivana
AU  - Šćepanović, Maja
AU  - Branković, Goran
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5754
AB  - The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
EP  - 1979
IS  - 2
SP  - 1970
VL  - 41
DO  - 10.1016/j.ceramint.2014.08.122
ER  - 
@article{
author = "Zdravković, Jelena and Simović, Bojana and Golubović, Aleksandar and Poleti, Dejan and Veljković, Ivana and Šćepanović, Maja and Branković, Goran",
year = "2015",
abstract = "The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors",
pages = "1979-1970",
number = "2",
volume = "41",
doi = "10.1016/j.ceramint.2014.08.122"
}
Zdravković, J., Simović, B., Golubović, A., Poleti, D., Veljković, I., Šćepanović, M.,& Branković, G.. (2015). Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International
Elsevier Sci Ltd, Oxford., 41(2), 1970-1979.
https://doi.org/10.1016/j.ceramint.2014.08.122
Zdravković J, Simović B, Golubović A, Poleti D, Veljković I, Šćepanović M, Branković G. Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International. 2015;41(2):1970-1979.
doi:10.1016/j.ceramint.2014.08.122 .
Zdravković, Jelena, Simović, Bojana, Golubović, Aleksandar, Poleti, Dejan, Veljković, Ivana, Šćepanović, Maja, Branković, Goran, "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors" in Ceramics International, 41, no. 2 (2015):1970-1979,
https://doi.org/10.1016/j.ceramint.2014.08.122 . .
81
52
76