Pavlović, Miloš

Link to this page

Authority KeyName Variants
aae24945-9a1e-471e-86c9-0573bd63deb4
  • Pavlović, Miloš (2)
  • Pavlović, Miloš K. (1)
Projects

Author's Bibliography

Biocontrol of economically significant diseases in order to increase the yield of pot marigold and valerian seeds and potato tubers

Filipović, Vladimir; Ugrenović, Vladan; Jevremović, Stojan; Dimitrijević, Snežana; Pavlović, Miloš; Popović, Vera; Dimitrijević, Suzana

(Serbian Association of Plant Breedings and Seed Producers, 2020)

TY  - JOUR
AU  - Filipović, Vladimir
AU  - Ugrenović, Vladan
AU  - Jevremović, Stojan
AU  - Dimitrijević, Snežana
AU  - Pavlović, Miloš
AU  - Popović, Vera
AU  - Dimitrijević, Suzana
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4549
AB  - The paper examines the effect of the application of three different preparations on the presence of four economically significant diseases in the crops of pot marigold, valerian and potato. On pot marigold, the intensity was determined of pot marigold powdery mildew infection of the marigold leaf (Podosphaera xanthii (Castagne) U. Braun & Shishkoff), whereas on valerian, it was the intensity of valerian stem canker and black mold (Alternaria alternata (Fr. ex Fr.) Keissel), and in potatoes, the intensity of early blight (Alternaria solani (Ellis & Mart.)) and that of late blight (Phytophthora infestans (Mont.) de Bary). Of the preparations, the synthetic preparation "Sekvenca" ("Sequence") (a.m. difenoconazole, 250 g/l) was applied at a dose of 0.5 l/ha, the registered biostimulant "Zlatno inje" ("Golden frost") (manure-based fertiliser) was applied at a dose of 3.0 l/ha, microbiological preparation (Bacillus amyloliquefaciens ssp. TMF3) at a dose of 3.0 l/ha. The fourth variant was the control variant, i.e. the variant without treatment. Field experiments were performed during 2019 at two locations in the wider area of the City of Pančevo. The experiments were performed by a randomised block system with three replications. The size of the main plot was 9.0 m2 (4.5 x 2.0 m). The following was used as plant material: the pot marigold variety of "Domaći oranž" ("Domestic orange"), the valerian variety of "Vojvođanski" ("Vojvodinian") and the potato variety of "Desire". The first assessment of disease intensity was performed one month following the treatment with the selected preparations, and the second one was performed two weeks after the first assessment. In the pot marigold crops, the smallest infection percentage had the plants treated with the type Bacillus amyloliquefaciens TMF3, in valerian, the fewest plants infected with the fungus A. alternata were recorded on small plots on which the synthetic preparation "Sekvenca" was applied, which was also the case with early blight and late blight. The weakest efficiency in the control of pot marigold powdery mildew infection and valerian stem canker and black mold was recorded with the use of the biostimulant "Zlatno inje", which showed the highest efficiency in the case of late blight. The highest yield of pot marigold seeds (632.7 kg/ha) had been treated with the type Bacillus amyloliquefaciens TMF3, with valerian, the highest seeds yield was recorded following the application of the preparation "Sekvenca" (186.1 kg/ha), while in potatoes, the highest amount of tubers was recorded with the preparation "Zlatno inje" (30.83 t/ha). However, if the agroecological and the agrotechnical aspects of production are taken into account, by the use of the type Bacillus amyloliquefaciens TMF3, a satisfactory basis was achieved for various kinds of further research of this and similar preparations in order to improve the existing production of medicinal and other types of plants.
AB  - U radu je ispitivan uticaj primene tri različita preparata na prisutnost četiri ekonomski značajne bolesti u usevu nevena, odoljena i krompira. Na nevenu je utvrđivan intenzitet zaraze pepelnice lista (Podosphaera xanthii (Castagne) U. Braun & Shishkoff.), u odoljenu na pegavost lista (Alternaria alternata (Fr. ex Fr.) Keissel), kod krompira na crnu pegavost (Alternaria solani (Ellis & Mart.)) i plamenjaču (Phytophthora infestans (Mont.) de Bary). Od preparata, primenjen je sintetički preparat "Sekvenca" (a. m. difenokonazol, 250 g/l) u dozi 0,5 l/ha, registrovani biostimulator "Zlatno inje" (đubrivo na bazi stajnjaka) u dozi 3,0 l/ha, mikrobiološki preparat (Bacillus amyloliquefaciens TMF3) u dozi 3,0 l/ha. Četvrta varijanta je bila kontrolna varijanta, odnosno varijanta bez tretmana. Poljski ogledi su izvedeni tokom 2019. godine na dve lokacije na širem području grada Pančeva. Ogledi su izvedeni po slučajnom blok sistemu u tri ponavljanja. Veličina elementarne parcele bila je 9,0 m2 (4,5 x 2,0 m). Kao biljni materijal korišćena je sorta nevena "Domaći oranž", odoljena "Vojvođanski" i krompira "Desire". Prva ocena intenziteta oboljenja, obavljena je mesec dana nakon tretmana odabranim preparatima, druga je obavljena dve nedelje nakon prve ocene. U usevu nevena najmanji procenat zaraze imale su biljke tretirane sojem Bacillus amyloliquefaciens TMF3, kod odoljena najmanje zaraženih biljaka sa gljivom A. alternata evidentirano je na parcelicama na kojima je primenjen sintetički preparat "Sekvenca", što je bio slučaj i sa crnom pegavosti i plamenjačom krompira. Najslabija efikasnost u suzbijanju pepelnice lista nevena i pegavosti lista odoljena je zabeležena primenom biostimulatora "Zlatno inje", koji je pokazao najveću efikasnost kod plamenjače krompira. Najveći prinos semena nevena (632,7 kg/ ha) imao je tretman sojem Bacillus amyloliquefaciens TMF3, kod odoljena najveći prinos semena zabeležen je pri primeni preparata "Sekvenca" (186,1 kg/ha), dok je kod krompira najveća količina krtola evidentirana sa preparatom "Zlatno inje" (30,83 t/ha). Ipak, ukoliko se uzmu u obzir agroekološki i agrotehnički aspekt proizvodnje, primenom soja Bacillus amyloliquefaciens TMF3, ostvarena je zadovoljavajuća osnova za različite vrste narednih istraživanja ovog i njemu sličnih preparata, a u cilju unapređenja postojeće proizvodnje lekovitog i ostalih vrsta bilja.
PB  - Serbian Association of Plant Breedings and Seed Producers
T2  - Selekcija i semenarstvo
T1  - Biocontrol of economically significant diseases in order to increase the yield of pot marigold and valerian seeds and potato tubers
T1  - Biokontrola ekonomski značajnih bolesti u cilju povećanja prinosa semena nevena i odoljena i krtola krompira
EP  - 51
IS  - 1
SP  - 38
VL  - 26
DO  - 10.5937/SelSem2001038F
ER  - 
@article{
author = "Filipović, Vladimir and Ugrenović, Vladan and Jevremović, Stojan and Dimitrijević, Snežana and Pavlović, Miloš and Popović, Vera and Dimitrijević, Suzana",
year = "2020",
abstract = "The paper examines the effect of the application of three different preparations on the presence of four economically significant diseases in the crops of pot marigold, valerian and potato. On pot marigold, the intensity was determined of pot marigold powdery mildew infection of the marigold leaf (Podosphaera xanthii (Castagne) U. Braun & Shishkoff), whereas on valerian, it was the intensity of valerian stem canker and black mold (Alternaria alternata (Fr. ex Fr.) Keissel), and in potatoes, the intensity of early blight (Alternaria solani (Ellis & Mart.)) and that of late blight (Phytophthora infestans (Mont.) de Bary). Of the preparations, the synthetic preparation "Sekvenca" ("Sequence") (a.m. difenoconazole, 250 g/l) was applied at a dose of 0.5 l/ha, the registered biostimulant "Zlatno inje" ("Golden frost") (manure-based fertiliser) was applied at a dose of 3.0 l/ha, microbiological preparation (Bacillus amyloliquefaciens ssp. TMF3) at a dose of 3.0 l/ha. The fourth variant was the control variant, i.e. the variant without treatment. Field experiments were performed during 2019 at two locations in the wider area of the City of Pančevo. The experiments were performed by a randomised block system with three replications. The size of the main plot was 9.0 m2 (4.5 x 2.0 m). The following was used as plant material: the pot marigold variety of "Domaći oranž" ("Domestic orange"), the valerian variety of "Vojvođanski" ("Vojvodinian") and the potato variety of "Desire". The first assessment of disease intensity was performed one month following the treatment with the selected preparations, and the second one was performed two weeks after the first assessment. In the pot marigold crops, the smallest infection percentage had the plants treated with the type Bacillus amyloliquefaciens TMF3, in valerian, the fewest plants infected with the fungus A. alternata were recorded on small plots on which the synthetic preparation "Sekvenca" was applied, which was also the case with early blight and late blight. The weakest efficiency in the control of pot marigold powdery mildew infection and valerian stem canker and black mold was recorded with the use of the biostimulant "Zlatno inje", which showed the highest efficiency in the case of late blight. The highest yield of pot marigold seeds (632.7 kg/ha) had been treated with the type Bacillus amyloliquefaciens TMF3, with valerian, the highest seeds yield was recorded following the application of the preparation "Sekvenca" (186.1 kg/ha), while in potatoes, the highest amount of tubers was recorded with the preparation "Zlatno inje" (30.83 t/ha). However, if the agroecological and the agrotechnical aspects of production are taken into account, by the use of the type Bacillus amyloliquefaciens TMF3, a satisfactory basis was achieved for various kinds of further research of this and similar preparations in order to improve the existing production of medicinal and other types of plants., U radu je ispitivan uticaj primene tri različita preparata na prisutnost četiri ekonomski značajne bolesti u usevu nevena, odoljena i krompira. Na nevenu je utvrđivan intenzitet zaraze pepelnice lista (Podosphaera xanthii (Castagne) U. Braun & Shishkoff.), u odoljenu na pegavost lista (Alternaria alternata (Fr. ex Fr.) Keissel), kod krompira na crnu pegavost (Alternaria solani (Ellis & Mart.)) i plamenjaču (Phytophthora infestans (Mont.) de Bary). Od preparata, primenjen je sintetički preparat "Sekvenca" (a. m. difenokonazol, 250 g/l) u dozi 0,5 l/ha, registrovani biostimulator "Zlatno inje" (đubrivo na bazi stajnjaka) u dozi 3,0 l/ha, mikrobiološki preparat (Bacillus amyloliquefaciens TMF3) u dozi 3,0 l/ha. Četvrta varijanta je bila kontrolna varijanta, odnosno varijanta bez tretmana. Poljski ogledi su izvedeni tokom 2019. godine na dve lokacije na širem području grada Pančeva. Ogledi su izvedeni po slučajnom blok sistemu u tri ponavljanja. Veličina elementarne parcele bila je 9,0 m2 (4,5 x 2,0 m). Kao biljni materijal korišćena je sorta nevena "Domaći oranž", odoljena "Vojvođanski" i krompira "Desire". Prva ocena intenziteta oboljenja, obavljena je mesec dana nakon tretmana odabranim preparatima, druga je obavljena dve nedelje nakon prve ocene. U usevu nevena najmanji procenat zaraze imale su biljke tretirane sojem Bacillus amyloliquefaciens TMF3, kod odoljena najmanje zaraženih biljaka sa gljivom A. alternata evidentirano je na parcelicama na kojima je primenjen sintetički preparat "Sekvenca", što je bio slučaj i sa crnom pegavosti i plamenjačom krompira. Najslabija efikasnost u suzbijanju pepelnice lista nevena i pegavosti lista odoljena je zabeležena primenom biostimulatora "Zlatno inje", koji je pokazao najveću efikasnost kod plamenjače krompira. Najveći prinos semena nevena (632,7 kg/ ha) imao je tretman sojem Bacillus amyloliquefaciens TMF3, kod odoljena najveći prinos semena zabeležen je pri primeni preparata "Sekvenca" (186,1 kg/ha), dok je kod krompira najveća količina krtola evidentirana sa preparatom "Zlatno inje" (30,83 t/ha). Ipak, ukoliko se uzmu u obzir agroekološki i agrotehnički aspekt proizvodnje, primenom soja Bacillus amyloliquefaciens TMF3, ostvarena je zadovoljavajuća osnova za različite vrste narednih istraživanja ovog i njemu sličnih preparata, a u cilju unapređenja postojeće proizvodnje lekovitog i ostalih vrsta bilja.",
publisher = "Serbian Association of Plant Breedings and Seed Producers",
journal = "Selekcija i semenarstvo",
title = "Biocontrol of economically significant diseases in order to increase the yield of pot marigold and valerian seeds and potato tubers, Biokontrola ekonomski značajnih bolesti u cilju povećanja prinosa semena nevena i odoljena i krtola krompira",
pages = "51-38",
number = "1",
volume = "26",
doi = "10.5937/SelSem2001038F"
}
Filipović, V., Ugrenović, V., Jevremović, S., Dimitrijević, S., Pavlović, M., Popović, V.,& Dimitrijević, S.. (2020). Biocontrol of economically significant diseases in order to increase the yield of pot marigold and valerian seeds and potato tubers. in Selekcija i semenarstvo
Serbian Association of Plant Breedings and Seed Producers., 26(1), 38-51.
https://doi.org/10.5937/SelSem2001038F
Filipović V, Ugrenović V, Jevremović S, Dimitrijević S, Pavlović M, Popović V, Dimitrijević S. Biocontrol of economically significant diseases in order to increase the yield of pot marigold and valerian seeds and potato tubers. in Selekcija i semenarstvo. 2020;26(1):38-51.
doi:10.5937/SelSem2001038F .
Filipović, Vladimir, Ugrenović, Vladan, Jevremović, Stojan, Dimitrijević, Snežana, Pavlović, Miloš, Popović, Vera, Dimitrijević, Suzana, "Biocontrol of economically significant diseases in order to increase the yield of pot marigold and valerian seeds and potato tubers" in Selekcija i semenarstvo, 26, no. 1 (2020):38-51,
https://doi.org/10.5937/SelSem2001038F . .
2

The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates

Pavlović, Miloš; Radović, Ljubica; Radisavljević, Igor; Radović, Nenad

(2019)

TY  - JOUR
AU  - Pavlović, Miloš
AU  - Radović, Ljubica
AU  - Radisavljević, Igor
AU  - Radović, Nenad
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4281
AB  - The aim of this work was to evaluate the influence of welding speed on microstructure, mechanical properties, as well as Intergranular corrosion (IGC) susceptibility of EN AW-5083 alloy welded using FSW. FSW was performed using constant rotation speed of 750 Rev/min, while welding speed was varied from 73 mm/min, 150 mm/min to 190 mm/min. Results show that increase of welding speed lead to decrease of the size of the nugget. This behavior is attributed to decrease of heat input during welding. Accordingly, lower grain size provides increase of the strength. All tested welds are resistant to IGC, evaluating by mass loss according to NAMLT test, and resistivity slightly decrease with increasing welding speed.
T2  - Advanced Technologies and Materials
T1  - The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates
EP  - 13
IS  - 1
SP  - 7
VL  - 44
DO  - 10.24867/ATM-2019-1-002
ER  - 
@article{
author = "Pavlović, Miloš and Radović, Ljubica and Radisavljević, Igor and Radović, Nenad",
year = "2019",
abstract = "The aim of this work was to evaluate the influence of welding speed on microstructure, mechanical properties, as well as Intergranular corrosion (IGC) susceptibility of EN AW-5083 alloy welded using FSW. FSW was performed using constant rotation speed of 750 Rev/min, while welding speed was varied from 73 mm/min, 150 mm/min to 190 mm/min. Results show that increase of welding speed lead to decrease of the size of the nugget. This behavior is attributed to decrease of heat input during welding. Accordingly, lower grain size provides increase of the strength. All tested welds are resistant to IGC, evaluating by mass loss according to NAMLT test, and resistivity slightly decrease with increasing welding speed.",
journal = "Advanced Technologies and Materials",
title = "The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates",
pages = "13-7",
number = "1",
volume = "44",
doi = "10.24867/ATM-2019-1-002"
}
Pavlović, M., Radović, L., Radisavljević, I.,& Radović, N.. (2019). The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates. in Advanced Technologies and Materials, 44(1), 7-13.
https://doi.org/10.24867/ATM-2019-1-002
Pavlović M, Radović L, Radisavljević I, Radović N. The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates. in Advanced Technologies and Materials. 2019;44(1):7-13.
doi:10.24867/ATM-2019-1-002 .
Pavlović, Miloš, Radović, Ljubica, Radisavljević, Igor, Radović, Nenad, "The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates" in Advanced Technologies and Materials, 44, no. 1 (2019):7-13,
https://doi.org/10.24867/ATM-2019-1-002 . .
1

Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging

Jegdić, Bore; Bobić, Biljana; Pavlović, Miloš K.; Alil, Ana; Putić, Slaviša

(Association of the Chemical Engineers of Serbia, 2015)

TY  - JOUR
AU  - Jegdić, Bore
AU  - Bobić, Biljana
AU  - Pavlović, Miloš K.
AU  - Alil, Ana
AU  - Putić, Slaviša
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2923
AB  - The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. The aging level in the tested alloy was evaluated by means of scanning electron microscopy and measurements of electrical resistivity. It was shown that the alloy after the new two-step aging is significantly more resistant to stress corrosion cracking. Values of tensile properties and fracture toughness are similar for both thermal states. Processes that take place at the crack tip have been considered. The effect of the testing solution temperature on the crack growth rate on the plateau was determined. Two values of the apparent activation energy were obtained. These values correspond to different processes that control crack growth rate on the plateau at higher and lower temperatures.
AB  - Ispitivan je uticaj jednostepenog i novog (kratkotrajnog) dvostepenog termičkog taloženja na otpornost prema naponskoj koroziji aluminijumske legure serije 7000, primenom metode male brzine deformacije i metode mehanike loma. Stepen starenja ispitivane legure je procenjen primenom skening elektronske mikroskopije i na osnovu merenja električne otpornosti. Pokazano je da je legura posle novog dvostepenog termičkog starenja znatno otpornija prema naponskoj koroziji. Vrednosti zateznih karakteristika i žilavosti loma su slične za oba termička stanja legure. Razmatrani su procesi koji se odvijaju na vrhu naponsko-korozione prsline. Određen je uticaj temperature rastvora za ispitivanje na brzinu rasta prsline na platou. Određene su dve vrednosti prividne energije aktivacije. Ove vrednosti odgovaraju različitim procesima koji kontrolišu brzinu rasta prsline na platou, na visokim i niskim temperaturama.
PB  - Association of the Chemical Engineers of Serbia
T2  - Chemical Industry & Chemical Engineering Quarterly
T1  - Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging
T1  - Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
EP  - 268
IS  - 2
SP  - 261
VL  - 21
DO  - 10.2298/CICEQ140324024J
ER  - 
@article{
author = "Jegdić, Bore and Bobić, Biljana and Pavlović, Miloš K. and Alil, Ana and Putić, Slaviša",
year = "2015",
abstract = "The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. The aging level in the tested alloy was evaluated by means of scanning electron microscopy and measurements of electrical resistivity. It was shown that the alloy after the new two-step aging is significantly more resistant to stress corrosion cracking. Values of tensile properties and fracture toughness are similar for both thermal states. Processes that take place at the crack tip have been considered. The effect of the testing solution temperature on the crack growth rate on the plateau was determined. Two values of the apparent activation energy were obtained. These values correspond to different processes that control crack growth rate on the plateau at higher and lower temperatures., Ispitivan je uticaj jednostepenog i novog (kratkotrajnog) dvostepenog termičkog taloženja na otpornost prema naponskoj koroziji aluminijumske legure serije 7000, primenom metode male brzine deformacije i metode mehanike loma. Stepen starenja ispitivane legure je procenjen primenom skening elektronske mikroskopije i na osnovu merenja električne otpornosti. Pokazano je da je legura posle novog dvostepenog termičkog starenja znatno otpornija prema naponskoj koroziji. Vrednosti zateznih karakteristika i žilavosti loma su slične za oba termička stanja legure. Razmatrani su procesi koji se odvijaju na vrhu naponsko-korozione prsline. Određen je uticaj temperature rastvora za ispitivanje na brzinu rasta prsline na platou. Određene su dve vrednosti prividne energije aktivacije. Ove vrednosti odgovaraju različitim procesima koji kontrolišu brzinu rasta prsline na platou, na visokim i niskim temperaturama.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Chemical Industry & Chemical Engineering Quarterly",
title = "Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging, Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja",
pages = "268-261",
number = "2",
volume = "21",
doi = "10.2298/CICEQ140324024J"
}
Jegdić, B., Bobić, B., Pavlović, M. K., Alil, A.,& Putić, S.. (2015). Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging. in Chemical Industry & Chemical Engineering Quarterly
Association of the Chemical Engineers of Serbia., 21(2), 261-268.
https://doi.org/10.2298/CICEQ140324024J
Jegdić B, Bobić B, Pavlović MK, Alil A, Putić S. Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging. in Chemical Industry & Chemical Engineering Quarterly. 2015;21(2):261-268.
doi:10.2298/CICEQ140324024J .
Jegdić, Bore, Bobić, Biljana, Pavlović, Miloš K., Alil, Ana, Putić, Slaviša, "Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging" in Chemical Industry & Chemical Engineering Quarterly, 21, no. 2 (2015):261-268,
https://doi.org/10.2298/CICEQ140324024J . .
3
1
3