TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Tomić, Nataša
AU  - Mladenović, Ivana
AU  - Perić, Tamara
AU  - Gligorijević, Bojan
AU  - Jančić-Heinemann, Radmila
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4559
AB  - Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental technology. The role of reinforcement is to adjust the mechanical properties, but also to control the shrinkage during curing. As reinforcement, alumina particles doped with iron oxide (Al2O3 Fe) synthesized using the sol-gel technique were selected. In order to simulate the process of adhesive application in real conditions, in vitro testing technique and adhesion properties of synthesized adhesive were used, where tooth tissue was used as a substrate. Comparison with standard adhesives used in dentistry was used to compare adhesion. The quality of the adhesive joint was evaluated using the microhardness testing method using different loads where it is estimated how the adhesive makes a connection with the substrate. It was shown that the synthesized adhesive showed significantly enhanced adhesion compared to the standard adhesive used in dentistry (836%).
AB  - Kompozitni materijali na bazi akrilatnih fotopolimerizujućih polimera, (Bis-GMA/TEGDMA) koji predstavljaju matricu i ojačanja koja se mogu odabrati sa ciljem podešavanja svojstava dobijenih kompozita, koriste se u oblasti dentalne tehnologije. Uloga ojačanja je podešavanje mehaničkih svojstava, ali i kontrola skupljanja tokom očvršćavanja. Kao ojačanje odabrane su čestice aluminijum-oksida dopirane gvožđe oksidom (Al2O3 Fe), sintetisane korišćenjem sol-gel tehnike. U cilju simuliranja procesa primene adheziva u realnim uslovima korišćena je in vitro tehnika ispitivanja adhezije sintetisanog adheziva pri čemu je kao substrat korišćeno tkivo zuba. Dobijene vrednosti adhezije poređene su sa komercijalnim adhezivima koji se koriste u stomatologiji. Kvalitet adhezivnog spoja ocenjen je merenjem mikrotvrdoće primenom različitih opterećenja, pri čemu je procenjen način kako se ostvaruje spoj između filma i podloge. Pokazalo se da je sintetisani adheziv imao višestruko jaču adheziju u poređenju sa standardnim adhezivom korišćenim u stomatologiji (836 %).
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles
T1  - Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida
EP  - 433
IS  - 4
SP  - 429
VL  - 75
DO  - 10.5937/tehnika2004429V
ER  - 

@article{
author = "Vuksanović, Marija M. and Tomić, Nataša and Mladenović, Ivana and Perić, Tamara and Gligorijević, Bojan and Jančić-Heinemann, Radmila",
year = "2020",
abstract = "Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental technology. The role of reinforcement is to adjust the mechanical properties, but also to control the shrinkage during curing. As reinforcement, alumina particles doped with iron oxide (Al2O3 Fe) synthesized using the sol-gel technique were selected. In order to simulate the process of adhesive application in real conditions, in vitro testing technique and adhesion properties of synthesized adhesive were used, where tooth tissue was used as a substrate. Comparison with standard adhesives used in dentistry was used to compare adhesion. The quality of the adhesive joint was evaluated using the microhardness testing method using different loads where it is estimated how the adhesive makes a connection with the substrate. It was shown that the synthesized adhesive showed significantly enhanced adhesion compared to the standard adhesive used in dentistry (836%)., Kompozitni materijali na bazi akrilatnih fotopolimerizujućih polimera, (Bis-GMA/TEGDMA) koji predstavljaju matricu i ojačanja koja se mogu odabrati sa ciljem podešavanja svojstava dobijenih kompozita, koriste se u oblasti dentalne tehnologije. Uloga ojačanja je podešavanje mehaničkih svojstava, ali i kontrola skupljanja tokom očvršćavanja. Kao ojačanje odabrane su čestice aluminijum-oksida dopirane gvožđe oksidom (Al2O3 Fe), sintetisane korišćenjem sol-gel tehnike. U cilju simuliranja procesa primene adheziva u realnim uslovima korišćena je in vitro tehnika ispitivanja adhezije sintetisanog adheziva pri čemu je kao substrat korišćeno tkivo zuba. Dobijene vrednosti adhezije poređene su sa komercijalnim adhezivima koji se koriste u stomatologiji. Kvalitet adhezivnog spoja ocenjen je merenjem mikrotvrdoće primenom različitih opterećenja, pri čemu je procenjen način kako se ostvaruje spoj između filma i podloge. Pokazalo se da je sintetisani adheziv imao višestruko jaču adheziju u poređenju sa standardnim adhezivom korišćenim u stomatologiji (836 %).",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles, Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida",
pages = "433-429",
number = "4",
volume = "75",
doi = "10.5937/tehnika2004429V"
}

Vuksanović, M. M., Tomić, N., Mladenović, I., Perić, T., Gligorijević, B.,& Jančić-Heinemann, R.. (2020). Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 75(4), 429-433.
https://doi.org/10.5937/tehnika2004429V

Vuksanović MM, Tomić N, Mladenović I, Perić T, Gligorijević B, Jančić-Heinemann R. Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles. in Tehnika. 2020;75(4):429-433.
doi:10.5937/tehnika2004429V .

Vuksanović, Marija M., Tomić, Nataša, Mladenović, Ivana, Perić, Tamara, Gligorijević, Bojan, Jančić-Heinemann, Radmila, "Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles" in Tehnika, 75, no. 4 (2020):429-433,
https://doi.org/10.5937/tehnika2004429V . .

TY  - JOUR
AU  - Lazouzi, Gamal
AU  - Vuksanović, Marija M.
AU  - Tomić, Nataša
AU  - Perić, Tamara
AU  - Volkov-Husović, Tatjana
AU  - Spasojević, Pavle
AU  - Jančić-Heinemann, Radmila
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3822
AB  - Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical properties of the polymer matrix by adding reinforcements in the form of ceramic particles. It has been shown that adding very small amounts of particles to the material, substantially improved mechanical properties of PMMA modified by dimethyl itaconate (PMMA/DMI). In this paper, different sorts of alumina fillers will be examined. Commercial alumina particles and micro particles of alumina obtained from the sol-gel technique influence the mechanical properties of the composite material obtained. Sol-gel techniques was the mean to synthesize pure alumina particles and ferrous oxide doped alumina particles. Composites are prepared with 1 wt. %, 3 wt. % and 5 wt. % of alumina based particles. It has been shown that all the tested fillers improve the flexular properties of the material relative to the pure matrix PMMA/DMI and the most suitable concentration of fillers was 1 wt. %. Among the types of fillers tested alumina particles obtained by sol-gel technique, perfomed in the best way in improving the flexural strength and modulus.
AB  - Dentalni materijali imaju posebne zahteve u vezi sa ponašanjem u uslovima eksploatacije. Poli(metil metakrilat) (PMMA) predstavlja jedan od često korišćenih materijala u protetici. Od značajnog je interesa da se poboljšaju mehanička svojstva polimerne matrice dodatkom ojačanja u obliku keramičkih čestica. Pokazalo se da se dodavanjem veoma malih količina čestica u materijal dobijaju bitno poboljšana mehanička svojstva PMMA modifikovanog dodatkom dimetil itakonata (PMMMA/DMI). U okviru ovog rada ispitaće se kako utiče dodatak komercijalnih nanočestica aluminijum oksida i mikro čestica aluminijum oksida dobijenih sol-gel tehnikom na mehanička svojstva dobijenog kompozitnog materijala. Sol-gel tehnikom sintetisane su čiste aluminijum oksidne čestice i čestice dopirane gvožđe oksidom. Pripremeljeni su kompozitni materijali sa 1 mas. %, 3 mas. % i 5 mas. % čestica na bazi aluminijum oksida. Pokazano je da svi testirani punioci poboljšavaju savojna svojstva materijala u odnosu na čistu matricu PMMA/DMI i da je najpogodnija količina čestica 1 mas. %. Između svih vrsta dodatih čestica, mikro čestice aluminijum oksida dobijenih sol-gel tehnikom su pokazale najbolje vrednosti poboljšanja savojne čvrstoće i modula.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate
T1  - Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
EP  - 516
IS  - 4
SP  - 511
VL  - 73
DO  - 10.5937/tehnika1804511L
ER  - 

@article{
author = "Lazouzi, Gamal and Vuksanović, Marija M. and Tomić, Nataša and Perić, Tamara and Volkov-Husović, Tatjana and Spasojević, Pavle and Jančić-Heinemann, Radmila",
year = "2018",
abstract = "Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical properties of the polymer matrix by adding reinforcements in the form of ceramic particles. It has been shown that adding very small amounts of particles to the material, substantially improved mechanical properties of PMMA modified by dimethyl itaconate (PMMA/DMI). In this paper, different sorts of alumina fillers will be examined. Commercial alumina particles and micro particles of alumina obtained from the sol-gel technique influence the mechanical properties of the composite material obtained. Sol-gel techniques was the mean to synthesize pure alumina particles and ferrous oxide doped alumina particles. Composites are prepared with 1 wt. %, 3 wt. % and 5 wt. % of alumina based particles. It has been shown that all the tested fillers improve the flexular properties of the material relative to the pure matrix PMMA/DMI and the most suitable concentration of fillers was 1 wt. %. Among the types of fillers tested alumina particles obtained by sol-gel technique, perfomed in the best way in improving the flexural strength and modulus., Dentalni materijali imaju posebne zahteve u vezi sa ponašanjem u uslovima eksploatacije. Poli(metil metakrilat) (PMMA) predstavlja jedan od često korišćenih materijala u protetici. Od značajnog je interesa da se poboljšaju mehanička svojstva polimerne matrice dodatkom ojačanja u obliku keramičkih čestica. Pokazalo se da se dodavanjem veoma malih količina čestica u materijal dobijaju bitno poboljšana mehanička svojstva PMMA modifikovanog dodatkom dimetil itakonata (PMMMA/DMI). U okviru ovog rada ispitaće se kako utiče dodatak komercijalnih nanočestica aluminijum oksida i mikro čestica aluminijum oksida dobijenih sol-gel tehnikom na mehanička svojstva dobijenog kompozitnog materijala. Sol-gel tehnikom sintetisane su čiste aluminijum oksidne čestice i čestice dopirane gvožđe oksidom. Pripremeljeni su kompozitni materijali sa 1 mas. %, 3 mas. % i 5 mas. % čestica na bazi aluminijum oksida. Pokazano je da svi testirani punioci poboljšavaju savojna svojstva materijala u odnosu na čistu matricu PMMA/DMI i da je najpogodnija količina čestica 1 mas. %. Između svih vrsta dodatih čestica, mikro čestice aluminijum oksida dobijenih sol-gel tehnikom su pokazale najbolje vrednosti poboljšanja savojne čvrstoće i modula.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate, Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata",
pages = "516-511",
number = "4",
volume = "73",
doi = "10.5937/tehnika1804511L"
}

Lazouzi, G., Vuksanović, M. M., Tomić, N., Perić, T., Volkov-Husović, T., Spasojević, P.,& Jančić-Heinemann, R.. (2018). The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 73(4), 511-516.
https://doi.org/10.5937/tehnika1804511L

Lazouzi G, Vuksanović MM, Tomić N, Perić T, Volkov-Husović T, Spasojević P, Jančić-Heinemann R. The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate. in Tehnika. 2018;73(4):511-516.
doi:10.5937/tehnika1804511L .

Lazouzi, Gamal, Vuksanović, Marija M., Tomić, Nataša, Perić, Tamara, Volkov-Husović, Tatjana, Spasojević, Pavle, Jančić-Heinemann, Radmila, "The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate" in Tehnika, 73, no. 4 (2018):511-516,
https://doi.org/10.5937/tehnika1804511L . .

TY  - JOUR
AU  - Perić, Tamara
AU  - Marković, Dejan
AU  - Petrović, Bojan
AU  - Radojević, Vesna
AU  - Todorović, Tatjana
AU  - Anđelski-Radičević, Biljana
AU  - Jančić-Heinemann, Radmila
AU  - Susić, Gordana
AU  - Perić‐Popadić, Aleksandra
AU  - Tomić-Spirić, Vesna
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3101
AB  - The purpose of this study was to evaluate efficacy of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) containing pastes among individuals with Sjogren's syndrome (SS). Thirty patients were randomised into three groups: CPP-ACP, CPP-ACFP, and 0.05 % NaF to be used two times a day during a 28-day experimental period. Saliva was analysed for flow rate, pH, buffering capacity and mineral concentrations. Dental plaque was examined for pH. Following the formation of artificial carious lesion, participants wore enamel slabs for an in situ remineralisation study. Remineralisation potential was examined using scanning electron microscope (SEM) and energy dispersive spectroscopic (EDS) technique. SE microphotographs were subsequently analysed for area, diameter, perimeter, roundness and the number of enamel defects and percentage of tooth surface affected by defects. At the end of the experimental period, a slight increase of salivary pH could have been observed. No differences in mineral composition of saliva were noted. The use of CPP-ACP and CPP-ACFP contributed to a significant rise of plaque pH. Image analysis revealed excessive reduction of defects' dimensions in the three experimental groups, and a decrease of the number of enamel defects in the CPP-ACP and CPP-ACFP groups. The EDS analysis did not show differences in Ca/P, Ca/O and P/O ratios in any of the treatment groups. CPP-ACP and CPP-ACFP hold promise as remineralising agents for patients with SS. Pastes containing CPP-ACP/CPP-ACFP show enhanced remineralisation potential compared with NaF mouthrinse in patients with SS.
PB  - Springer Heidelberg, Heidelberg
T2  - Clinical Oral Investigations
T1  - Efficacy of pastes containing CPP-ACP and CPP-ACFP in patients with Sjogren's syndrome
EP  - 2165
IS  - 9
SP  - 2153
VL  - 19
DO  - 10.1007/s00784-015-1444-1
ER  - 

@article{
author = "Perić, Tamara and Marković, Dejan and Petrović, Bojan and Radojević, Vesna and Todorović, Tatjana and Anđelski-Radičević, Biljana and Jančić-Heinemann, Radmila and Susić, Gordana and Perić‐Popadić, Aleksandra and Tomić-Spirić, Vesna",
year = "2015",
abstract = "The purpose of this study was to evaluate efficacy of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) containing pastes among individuals with Sjogren's syndrome (SS). Thirty patients were randomised into three groups: CPP-ACP, CPP-ACFP, and 0.05 % NaF to be used two times a day during a 28-day experimental period. Saliva was analysed for flow rate, pH, buffering capacity and mineral concentrations. Dental plaque was examined for pH. Following the formation of artificial carious lesion, participants wore enamel slabs for an in situ remineralisation study. Remineralisation potential was examined using scanning electron microscope (SEM) and energy dispersive spectroscopic (EDS) technique. SE microphotographs were subsequently analysed for area, diameter, perimeter, roundness and the number of enamel defects and percentage of tooth surface affected by defects. At the end of the experimental period, a slight increase of salivary pH could have been observed. No differences in mineral composition of saliva were noted. The use of CPP-ACP and CPP-ACFP contributed to a significant rise of plaque pH. Image analysis revealed excessive reduction of defects' dimensions in the three experimental groups, and a decrease of the number of enamel defects in the CPP-ACP and CPP-ACFP groups. The EDS analysis did not show differences in Ca/P, Ca/O and P/O ratios in any of the treatment groups. CPP-ACP and CPP-ACFP hold promise as remineralising agents for patients with SS. Pastes containing CPP-ACP/CPP-ACFP show enhanced remineralisation potential compared with NaF mouthrinse in patients with SS.",
publisher = "Springer Heidelberg, Heidelberg",
journal = "Clinical Oral Investigations",
title = "Efficacy of pastes containing CPP-ACP and CPP-ACFP in patients with Sjogren's syndrome",
pages = "2165-2153",
number = "9",
volume = "19",
doi = "10.1007/s00784-015-1444-1"
}

Perić, T., Marković, D., Petrović, B., Radojević, V., Todorović, T., Anđelski-Radičević, B., Jančić-Heinemann, R., Susić, G., Perić‐Popadić, A.,& Tomić-Spirić, V.. (2015). Efficacy of pastes containing CPP-ACP and CPP-ACFP in patients with Sjogren's syndrome. in Clinical Oral Investigations
Springer Heidelberg, Heidelberg., 19(9), 2153-2165.
https://doi.org/10.1007/s00784-015-1444-1

Perić T, Marković D, Petrović B, Radojević V, Todorović T, Anđelski-Radičević B, Jančić-Heinemann R, Susić G, Perić‐Popadić A, Tomić-Spirić V. Efficacy of pastes containing CPP-ACP and CPP-ACFP in patients with Sjogren's syndrome. in Clinical Oral Investigations. 2015;19(9):2153-2165.
doi:10.1007/s00784-015-1444-1 .

Perić, Tamara, Marković, Dejan, Petrović, Bojan, Radojević, Vesna, Todorović, Tatjana, Anđelski-Radičević, Biljana, Jančić-Heinemann, Radmila, Susić, Gordana, Perić‐Popadić, Aleksandra, Tomić-Spirić, Vesna, "Efficacy of pastes containing CPP-ACP and CPP-ACFP in patients with Sjogren's syndrome" in Clinical Oral Investigations, 19, no. 9 (2015):2153-2165,
https://doi.org/10.1007/s00784-015-1444-1 . .

TY  - JOUR
AU  - Perić, Tamara
AU  - Marković, Dejan
AU  - Radojević, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Petrović, Bojan
AU  - Lamovec, Jelena
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2704
AB  - Purpose: The purpose of the study was to evaluate the surface characteristics of demineralized enamel after treatment with pastes containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) or casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) and to compare their efficacy with that of 0.05% NaF. Methods: Following formation of the artificial carious lesion, enamel slabs were divided into 4 groups (CPP-ACP, CPP-ACFP, 0.05% NaF and control) and submitted to a chemical caries model. Remineralization potential was examined using scanning electron microscope, energy-dispersive spectroscopy (EDS) and microhardness test. Scanning electron microphotographs were analyzed for area, minimal, maximal and mean diameter, perimeter, roundness and number of enamel defects and percentage of tooth surface affected by defects. Results: Treatment with 0.05% NaF partly reduced the appearance of enamel defects when compared with irregular demineralized enamel. Treatment with CPP-ACP or CPP-ACFP resulted in occlusion of defects which produced more flattened enamel surface. Image analysis revealed reduction of the dimensions of the defects in the 3 experimental groups. Treatment with CPP-ACFP decreased the number of enamel defects when compared with demineralized enamel. The EDS analysis did not show differences in Ca/O, P/O and Ca/P ratios between the groups (P gt 0.05). Microhardness test revealed significant effects of CPP-ACP and CPP-ACFP (P lt 0.05). Conclusions: Pastes containing CPP-ACP or CPP-ACFP showed potential to remineralize enamel surface lesions.
PB  - Sage Publications Ltd, London
T2  - Journal of Applied Biomaterials & Functional Materials
T1  - Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel
EP  - 239
IS  - 3
SP  - 234
VL  - 12
DO  - 10.5301/jabfm.5000194
ER  - 

@article{
author = "Perić, Tamara and Marković, Dejan and Radojević, Vesna and Jančić-Heinemann, Radmila and Petrović, Bojan and Lamovec, Jelena",
year = "2014",
abstract = "Purpose: The purpose of the study was to evaluate the surface characteristics of demineralized enamel after treatment with pastes containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) or casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) and to compare their efficacy with that of 0.05% NaF. Methods: Following formation of the artificial carious lesion, enamel slabs were divided into 4 groups (CPP-ACP, CPP-ACFP, 0.05% NaF and control) and submitted to a chemical caries model. Remineralization potential was examined using scanning electron microscope, energy-dispersive spectroscopy (EDS) and microhardness test. Scanning electron microphotographs were analyzed for area, minimal, maximal and mean diameter, perimeter, roundness and number of enamel defects and percentage of tooth surface affected by defects. Results: Treatment with 0.05% NaF partly reduced the appearance of enamel defects when compared with irregular demineralized enamel. Treatment with CPP-ACP or CPP-ACFP resulted in occlusion of defects which produced more flattened enamel surface. Image analysis revealed reduction of the dimensions of the defects in the 3 experimental groups. Treatment with CPP-ACFP decreased the number of enamel defects when compared with demineralized enamel. The EDS analysis did not show differences in Ca/O, P/O and Ca/P ratios between the groups (P gt 0.05). Microhardness test revealed significant effects of CPP-ACP and CPP-ACFP (P lt 0.05). Conclusions: Pastes containing CPP-ACP or CPP-ACFP showed potential to remineralize enamel surface lesions.",
publisher = "Sage Publications Ltd, London",
journal = "Journal of Applied Biomaterials & Functional Materials",
title = "Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel",
pages = "239-234",
number = "3",
volume = "12",
doi = "10.5301/jabfm.5000194"
}

Perić, T., Marković, D., Radojević, V., Jančić-Heinemann, R., Petrović, B.,& Lamovec, J.. (2014). Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel. in Journal of Applied Biomaterials & Functional Materials
Sage Publications Ltd, London., 12(3), 234-239.
https://doi.org/10.5301/jabfm.5000194

Perić T, Marković D, Radojević V, Jančić-Heinemann R, Petrović B, Lamovec J. Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel. in Journal of Applied Biomaterials & Functional Materials. 2014;12(3):234-239.
doi:10.5301/jabfm.5000194 .

Perić, Tamara, Marković, Dejan, Radojević, Vesna, Jančić-Heinemann, Radmila, Petrović, Bojan, Lamovec, Jelena, "Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel" in Journal of Applied Biomaterials & Functional Materials, 12, no. 3 (2014):234-239,
https://doi.org/10.5301/jabfm.5000194 . .