Milosavljević, Aleksandra

Link to this page

Authority KeyName Variants
orcid::0000-0003-3841-7357
  • Milosavljević, Aleksandra (3)
Projects

Author's Bibliography

Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition

Mijatović, Nevenka; Terzić, Anja; Pezo, Lato; Milicić, Ljiljana; Milosavljević, Aleksandra; Živojinović, Dragana

(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)

TY  - JOUR
AU  - Mijatović, Nevenka
AU  - Terzić, Anja
AU  - Pezo, Lato
AU  - Milicić, Ljiljana
AU  - Milosavljević, Aleksandra
AU  - Živojinović, Dragana
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4137
AB  - New global tendencies for waste materials reusing in building materials are imposing the request for improved performances of chemical analysis methods and the improvements of matrices used. A new method for optical emission spectrometry with inductively coupled plasma (ICP-OES) is developed and validated for the chemical analysis (35 elements: Al, Be, Cd, So, Cr, Cu, Fe, Mn, Mo, Ni, V, Mo, Zn, Pb , Bi, Si, Zr, W, As, Se, Sb, Sn, Ti, Ba, B, Ag, Mg, Ca, K, Na, S, P, Ga, In, Li) in leachate of fly ash. Validation performances and the uncertainty of measurement were resolved. Uncertainty of measurements were resolved by three routes: validation procedure, participation in proficiency testing (PT) schemes and standard method. The obtained method is a new simple and effective analyzing route for determination of undesired trace elements and their quantity comprised in leachates of fly ash, and leachates of building materials with addition of fly ash (cement binders and mortars). In order to prove its accuracy and precision, the developed method was employed on laboratory samples of cement binders and mortars. Results were compared with limit values provided in the standard. Multivariate analyses, i.e. cluster analysis and principal component analysis, were applied to establish interrelations between analyzed samples, and to certify the developed ICP-OES method.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition
EP  - 444
IS  - 4
SP  - 429
VL  - 51
DO  - 10.2298/SOS1904429M
ER  - 
@article{
author = "Mijatović, Nevenka and Terzić, Anja and Pezo, Lato and Milicić, Ljiljana and Milosavljević, Aleksandra and Živojinović, Dragana",
year = "2019",
abstract = "New global tendencies for waste materials reusing in building materials are imposing the request for improved performances of chemical analysis methods and the improvements of matrices used. A new method for optical emission spectrometry with inductively coupled plasma (ICP-OES) is developed and validated for the chemical analysis (35 elements: Al, Be, Cd, So, Cr, Cu, Fe, Mn, Mo, Ni, V, Mo, Zn, Pb , Bi, Si, Zr, W, As, Se, Sb, Sn, Ti, Ba, B, Ag, Mg, Ca, K, Na, S, P, Ga, In, Li) in leachate of fly ash. Validation performances and the uncertainty of measurement were resolved. Uncertainty of measurements were resolved by three routes: validation procedure, participation in proficiency testing (PT) schemes and standard method. The obtained method is a new simple and effective analyzing route for determination of undesired trace elements and their quantity comprised in leachates of fly ash, and leachates of building materials with addition of fly ash (cement binders and mortars). In order to prove its accuracy and precision, the developed method was employed on laboratory samples of cement binders and mortars. Results were compared with limit values provided in the standard. Multivariate analyses, i.e. cluster analysis and principal component analysis, were applied to establish interrelations between analyzed samples, and to certify the developed ICP-OES method.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition",
pages = "444-429",
number = "4",
volume = "51",
doi = "10.2298/SOS1904429M"
}
Mijatović, N., Terzić, A., Pezo, L., Milicić, L., Milosavljević, A.,& Živojinović, D.. (2019). Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 51(4), 429-444.
https://doi.org/10.2298/SOS1904429M
Mijatović N, Terzić A, Pezo L, Milicić L, Milosavljević A, Živojinović D. Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition. in Science of Sintering. 2019;51(4):429-444.
doi:10.2298/SOS1904429M .
Mijatović, Nevenka, Terzić, Anja, Pezo, Lato, Milicić, Ljiljana, Milosavljević, Aleksandra, Živojinović, Dragana, "Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition" in Science of Sintering, 51, no. 4 (2019):429-444,
https://doi.org/10.2298/SOS1904429M . .
1
3
4

Structural characteristics of some ternary Ag-In-Sn alloys

Milosavljević, Aleksandra; Živković, Dragana; Kamberović, Željko

(Savez inženjera metalurgije Srbije, Beograd, 2008)

TY  - JOUR
AU  - Milosavljević, Aleksandra
AU  - Živković, Dragana
AU  - Kamberović, Željko
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1254
AB  - The Ag-In-Sn system, as one of potential lead-free solder materials, was studied in this paper. The investigated alloys were chosen from two sections, with molar ratio of In:Sn equal to 1:4; 1:2. DTA, XRD, SEM and micro hardness investigations were used in order to determine structural characteristics of chosen Ag-In-Sn ternary alloys. .
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metalurgija
T1  - Structural characteristics of some ternary Ag-In-Sn alloys
EP  - 167
IS  - 3
SP  - 161
VL  - 14
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1254
ER  - 
@article{
author = "Milosavljević, Aleksandra and Živković, Dragana and Kamberović, Željko",
year = "2008",
abstract = "The Ag-In-Sn system, as one of potential lead-free solder materials, was studied in this paper. The investigated alloys were chosen from two sections, with molar ratio of In:Sn equal to 1:4; 1:2. DTA, XRD, SEM and micro hardness investigations were used in order to determine structural characteristics of chosen Ag-In-Sn ternary alloys. .",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metalurgija",
title = "Structural characteristics of some ternary Ag-In-Sn alloys",
pages = "167-161",
number = "3",
volume = "14",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1254"
}
Milosavljević, A., Živković, D.,& Kamberović, Ž.. (2008). Structural characteristics of some ternary Ag-In-Sn alloys. in Metalurgija
Savez inženjera metalurgije Srbije, Beograd., 14(3), 161-167.
https://hdl.handle.net/21.15107/rcub_technorep_1254
Milosavljević A, Živković D, Kamberović Ž. Structural characteristics of some ternary Ag-In-Sn alloys. in Metalurgija. 2008;14(3):161-167.
https://hdl.handle.net/21.15107/rcub_technorep_1254 .
Milosavljević, Aleksandra, Živković, Dragana, Kamberović, Željko, "Structural characteristics of some ternary Ag-In-Sn alloys" in Metalurgija, 14, no. 3 (2008):161-167,
https://hdl.handle.net/21.15107/rcub_technorep_1254 .

Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system

Milosavljević, Aleksandra; Živković, Dragana; Pavlović, Jelena

(Savez inženjera i tehničara Srbije, Beograd, 2006)

TY  - JOUR
AU  - Milosavljević, Aleksandra
AU  - Živković, Dragana
AU  - Pavlović, Jelena
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/924
AB  - Lead - free soldering became very popular in the whole world, because of high ecological demands in industry. Most of alternative alloys have high content of tin, and some of them are already used in electronic industry. One of them is Ag-Sn. In order to decrease melting point of alloy, addition of indium is used and it is expected that Ag-In-Sn alloy will be suitable for replace Sn-Pb standard solder alloy. From that reasons, the results of investigation thermodynamic properties and phase equilibria of Ag-In-Sn alloys are presented in this paper. The investigated samples are with constant molar ratio of In:Sn = 1:2. DTA and SEM analysis were used as methods for characterization of Ag-In-Sn ternary alloys, and the GSM model was used as a method for thermodynamic prediction of Ag-In-Sn alloys at 1423 K.
AB  - Jedan od aktuelnih svetskih trendova, obzirom na primarne ekološke zahteve svakako je i pronalaženje novih, bezolovnih lemnih legura koje mogu zameniti već postojeće lemove na bazi olova. Legure koje se već koriste u elektronskoj industriji kao zamena za standardne Pb-Sn lemove, imaju veliki sadržaj kalaja (Ag-Sn), pa se može očekivati da će se dodatkom indijuma kao trećeg elementa sniziti temperatura topljenja legure. Iz tih razloga, ispitivan je sistem Ag-In-Sn, pri čemu su odabrane legure sa konstantnim molskim odnosom In:Sn = 1:2. U cilju što potpunijeg poznavanja termodinamičkih veličina, kao i faznih ravnoteža ovog sistema, rad obuhvata sledeće: • Kvalitativnu diferencijalnu termijsku analizu (DTA), u cilju određivanja karakterističnih temperatura faznih transformacija za ispitivane legure • Skenirajuću elektronsku mikroskopiju (SEM) radi utvrđivanja mikrostrukture uzoraka • Određivanje koeficijenata aktivnosti, aktivnosti, parcijalnih i integralnih molarnih termodinamičkih veličina legura sistema Ag-In-Sn, na temperaturi od 1423 K metodom termodinamičkog predviđanja po opštem modelu rastvora.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika - Novi materijali
T1  - Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system
T1  - Ispitivanje termodinamičkih veličina i faznih ravnoteža u sistemu Ag-In-Sn
EP  - 20
IS  - 1
SP  - 15
VL  - 15
UR  - https://hdl.handle.net/21.15107/rcub_technorep_924
ER  - 
@article{
author = "Milosavljević, Aleksandra and Živković, Dragana and Pavlović, Jelena",
year = "2006",
abstract = "Lead - free soldering became very popular in the whole world, because of high ecological demands in industry. Most of alternative alloys have high content of tin, and some of them are already used in electronic industry. One of them is Ag-Sn. In order to decrease melting point of alloy, addition of indium is used and it is expected that Ag-In-Sn alloy will be suitable for replace Sn-Pb standard solder alloy. From that reasons, the results of investigation thermodynamic properties and phase equilibria of Ag-In-Sn alloys are presented in this paper. The investigated samples are with constant molar ratio of In:Sn = 1:2. DTA and SEM analysis were used as methods for characterization of Ag-In-Sn ternary alloys, and the GSM model was used as a method for thermodynamic prediction of Ag-In-Sn alloys at 1423 K., Jedan od aktuelnih svetskih trendova, obzirom na primarne ekološke zahteve svakako je i pronalaženje novih, bezolovnih lemnih legura koje mogu zameniti već postojeće lemove na bazi olova. Legure koje se već koriste u elektronskoj industriji kao zamena za standardne Pb-Sn lemove, imaju veliki sadržaj kalaja (Ag-Sn), pa se može očekivati da će se dodatkom indijuma kao trećeg elementa sniziti temperatura topljenja legure. Iz tih razloga, ispitivan je sistem Ag-In-Sn, pri čemu su odabrane legure sa konstantnim molskim odnosom In:Sn = 1:2. U cilju što potpunijeg poznavanja termodinamičkih veličina, kao i faznih ravnoteža ovog sistema, rad obuhvata sledeće: • Kvalitativnu diferencijalnu termijsku analizu (DTA), u cilju određivanja karakterističnih temperatura faznih transformacija za ispitivane legure • Skenirajuću elektronsku mikroskopiju (SEM) radi utvrđivanja mikrostrukture uzoraka • Određivanje koeficijenata aktivnosti, aktivnosti, parcijalnih i integralnih molarnih termodinamičkih veličina legura sistema Ag-In-Sn, na temperaturi od 1423 K metodom termodinamičkog predviđanja po opštem modelu rastvora.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika - Novi materijali",
title = "Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system, Ispitivanje termodinamičkih veličina i faznih ravnoteža u sistemu Ag-In-Sn",
pages = "20-15",
number = "1",
volume = "15",
url = "https://hdl.handle.net/21.15107/rcub_technorep_924"
}
Milosavljević, A., Živković, D.,& Pavlović, J.. (2006). Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system. in Tehnika - Novi materijali
Savez inženjera i tehničara Srbije, Beograd., 15(1), 15-20.
https://hdl.handle.net/21.15107/rcub_technorep_924
Milosavljević A, Živković D, Pavlović J. Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system. in Tehnika - Novi materijali. 2006;15(1):15-20.
https://hdl.handle.net/21.15107/rcub_technorep_924 .
Milosavljević, Aleksandra, Živković, Dragana, Pavlović, Jelena, "Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system" in Tehnika - Novi materijali, 15, no. 1 (2006):15-20,
https://hdl.handle.net/21.15107/rcub_technorep_924 .