TY  - JOUR
AU  - Petrović, Rada
AU  - Lazarević, Slavica
AU  - Janković-Častvan, Ivona
AU  - Matić, Tamara
AU  - Milivojević, Marko
AU  - Milošević, Dragana
AU  - Veljović, Đorđe
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5263
AB  - Kaolinite/illite (KUb) and sepiolite (SEP) clays were used to study Cr(III) adsorption removal from aqueous solutions so that they could be utilized after saturation for ceramic manufacturing. SEP had a larger specific surface area and a higher PZC than KUb. The removal of Cr(III) was evaluated using a batch equilibration procedure at pHi = 4 and pHi = 6. Fast removal kinetics were observed for both clays. Maximum removal capacity was determined by changing the concentration of Cr(III) while keeping the concentration of clay constant and by altering the amount of clay while keeping the concentration of Cr(III) constant. In all situations, SEP had greater capacity than KUb, and capacity was greater for both clays at higher pHi. Not only did the pHi impact the removal capacity and efficiency, but so did the pH during adsorption and the initial concentration of Cr(III). Because of the higher PZC, the pHf for SEP was higher for the same pHi. The higher the pH and Cr(III) concentration, the higher the probability of Cr(OH)3 precipitation and the higher the removal capacity. Dried saturated clays were uniaxially pressed and sintered at 1000 °C for 2 h. The densities of the sintered materials were nearly identical to those of pure clay-based materials, but the compressive strengths were higher, which is significant for the use of saturated clays as raw materials in ceramic manufacturing. Leaching of Cr from SEP-based material was significantly higher than from KUb-based material probably due to the presence of CaCO3 in the SEP.
PB  - Elsevier
T2  - Applied  Clay Sciences
T1  - Removal of trivalent chromium from aqueous solutions by natural clays: Valorization of saturated adsorbents as raw materials in ceramic manufacturing
SP  - 106747
VL  - 231
DO  - 10.1016/j.clay.2022.106747
ER  - 

@article{
author = "Petrović, Rada and Lazarević, Slavica and Janković-Častvan, Ivona and Matić, Tamara and Milivojević, Marko and Milošević, Dragana and Veljović, Đorđe",
year = "2023",
abstract = "Kaolinite/illite (KUb) and sepiolite (SEP) clays were used to study Cr(III) adsorption removal from aqueous solutions so that they could be utilized after saturation for ceramic manufacturing. SEP had a larger specific surface area and a higher PZC than KUb. The removal of Cr(III) was evaluated using a batch equilibration procedure at pHi = 4 and pHi = 6. Fast removal kinetics were observed for both clays. Maximum removal capacity was determined by changing the concentration of Cr(III) while keeping the concentration of clay constant and by altering the amount of clay while keeping the concentration of Cr(III) constant. In all situations, SEP had greater capacity than KUb, and capacity was greater for both clays at higher pHi. Not only did the pHi impact the removal capacity and efficiency, but so did the pH during adsorption and the initial concentration of Cr(III). Because of the higher PZC, the pHf for SEP was higher for the same pHi. The higher the pH and Cr(III) concentration, the higher the probability of Cr(OH)3 precipitation and the higher the removal capacity. Dried saturated clays were uniaxially pressed and sintered at 1000 °C for 2 h. The densities of the sintered materials were nearly identical to those of pure clay-based materials, but the compressive strengths were higher, which is significant for the use of saturated clays as raw materials in ceramic manufacturing. Leaching of Cr from SEP-based material was significantly higher than from KUb-based material probably due to the presence of CaCO3 in the SEP.",
publisher = "Elsevier",
journal = "Applied  Clay Sciences",
title = "Removal of trivalent chromium from aqueous solutions by natural clays: Valorization of saturated adsorbents as raw materials in ceramic manufacturing",
pages = "106747",
volume = "231",
doi = "10.1016/j.clay.2022.106747"
}

Petrović, R., Lazarević, S., Janković-Častvan, I., Matić, T., Milivojević, M., Milošević, D.,& Veljović, Đ.. (2023). Removal of trivalent chromium from aqueous solutions by natural clays: Valorization of saturated adsorbents as raw materials in ceramic manufacturing. in Applied  Clay Sciences
Elsevier., 231, 106747.
https://doi.org/10.1016/j.clay.2022.106747

Petrović R, Lazarević S, Janković-Častvan I, Matić T, Milivojević M, Milošević D, Veljović Đ. Removal of trivalent chromium from aqueous solutions by natural clays: Valorization of saturated adsorbents as raw materials in ceramic manufacturing. in Applied  Clay Sciences. 2023;231:106747.
doi:10.1016/j.clay.2022.106747 .

Petrović, Rada, Lazarević, Slavica, Janković-Častvan, Ivona, Matić, Tamara, Milivojević, Marko, Milošević, Dragana, Veljović, Đorđe, "Removal of trivalent chromium from aqueous solutions by natural clays: Valorization of saturated adsorbents as raw materials in ceramic manufacturing" in Applied  Clay Sciences, 231 (2023):106747,
https://doi.org/10.1016/j.clay.2022.106747 . .

TY  - CONF
AU  - Dimitrijević, Jelena
AU  - Petrović, Jelena
AU  - Milošević, Dragana
AU  - Dikić, Jelena
AU  - Jevtić, Sanja
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6479
AB  - Silanization of the natural and synthetic zeolites as well as their use as adsorbents for removing arsenic(III) oxyanions from wastewater are the topic of this paper. Two types of zeolite were used: natural zeolite-clinoptilolite from Zlatokop deposit, Vranjska Banja, Serbia, previously converted to H+-form and synthetic zeolite, mordenite. The modification was performed with solution (3-aminopropyl) triethoxysilane (APTES). The presence of APTES on the surface of zeolite was confirmed using TG/DSC and FTIR analysis. The results showed that natural aminosilane-modified zeolite has a higher adsorption capacity for arsenic(III) oxyanions compared to mordenite prepared in the same way. The kinetic data follow the Lagergren pseudo-second-order model. This model implies a chemical interaction between AsO33–- ions and functional groups on the silanized zeolite surface.
PB  - Croatia : Croatian Zeolites Association
C3  - Proceedings of the 9th Croatian-Slovenian-Serbian Symposium on Zeolites
T1  - Removal of arsenic(III) oxyanions from wastewater using aminosilane -modified natural and synthetic zeolite
EP  - 50
SP  - 47
UR  - https://hdl.handle.net/21.15107/rcub_cer_4893
ER  - 

@conference{
author = "Dimitrijević, Jelena and Petrović, Jelena and Milošević, Dragana and Dikić, Jelena and Jevtić, Sanja",
year = "2021",
abstract = "Silanization of the natural and synthetic zeolites as well as their use as adsorbents for removing arsenic(III) oxyanions from wastewater are the topic of this paper. Two types of zeolite were used: natural zeolite-clinoptilolite from Zlatokop deposit, Vranjska Banja, Serbia, previously converted to H+-form and synthetic zeolite, mordenite. The modification was performed with solution (3-aminopropyl) triethoxysilane (APTES). The presence of APTES on the surface of zeolite was confirmed using TG/DSC and FTIR analysis. The results showed that natural aminosilane-modified zeolite has a higher adsorption capacity for arsenic(III) oxyanions compared to mordenite prepared in the same way. The kinetic data follow the Lagergren pseudo-second-order model. This model implies a chemical interaction between AsO33–- ions and functional groups on the silanized zeolite surface.",
publisher = "Croatia : Croatian Zeolites Association",
journal = "Proceedings of the 9th Croatian-Slovenian-Serbian Symposium on Zeolites",
title = "Removal of arsenic(III) oxyanions from wastewater using aminosilane -modified natural and synthetic zeolite",
pages = "50-47",
url = "https://hdl.handle.net/21.15107/rcub_cer_4893"
}

Dimitrijević, J., Petrović, J., Milošević, D., Dikić, J.,& Jevtić, S.. (2021). Removal of arsenic(III) oxyanions from wastewater using aminosilane -modified natural and synthetic zeolite. in Proceedings of the 9th Croatian-Slovenian-Serbian Symposium on Zeolites
Croatia : Croatian Zeolites Association., 47-50.
https://hdl.handle.net/21.15107/rcub_cer_4893

Dimitrijević J, Petrović J, Milošević D, Dikić J, Jevtić S. Removal of arsenic(III) oxyanions from wastewater using aminosilane -modified natural and synthetic zeolite. in Proceedings of the 9th Croatian-Slovenian-Serbian Symposium on Zeolites. 2021;:47-50.
https://hdl.handle.net/21.15107/rcub_cer_4893 .

Dimitrijević, Jelena, Petrović, Jelena, Milošević, Dragana, Dikić, Jelena, Jevtić, Sanja, "Removal of arsenic(III) oxyanions from wastewater using aminosilane -modified natural and synthetic zeolite" in Proceedings of the 9th Croatian-Slovenian-Serbian Symposium on Zeolites (2021):47-50,
https://hdl.handle.net/21.15107/rcub_cer_4893 .

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Milošević, Dragana
AU  - Veličić, Zorica
AU  - Karanac, Milica
AU  - Kalifa, Mustafa
AU  - Nikolić, Jovana
AU  - Marinković, Aleksandar
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3527
AB  - Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), didecyl terephthalate (DDTP), dibenzyl terephthalate(DBTP) and diglyceryl terephthalate(DGTP), were obtained by catalytic depolymerization of PET with isononyl alcohol, decyl alcohol, benzyl alcohol and glycerol. The structural analysis of the synthesized plasticizers was done using elemental, FTIR and NMR spectral analysis. Physical-mechanical properties of the rubber products composed of 100 phr of 28 % nitrile butadiene caoutchouc (NBR) and 20.7 phr of plasticizer were investigated. Influence of the synthesized plasticizers on Shore hardness, breaking strength and elongation at break was investigated. Obtained results were compared with ones obtained for commercial plasticizer dioctyl phthatale (DOP). Evaluation of economic potential of new technology for plasticizers production, i.e. results of techno-economic analysis, was presented. Benefits of the presented technology was based on the use of waste PET which is related to both environmental protection and profitability aspects.
AB  - U radu je predstavljen postupak sinteze plastifikatora na bazi otpadnog poli(etilen tereftalata) (PET-a), kao i ekonomičnost razvijene tehnologije. Plastifikatori na bazi otpadnog PET-a: diizononil-tereftalat (DINTP), didecil-tereftalat (DDTP), dibenzil-tereftalat (DBTP) i digliceriltereftalat (DGTP) dobijeni su katalitičkom depolimerizacijom PET-a monohidroksilnim alkoholima (izononil, decil i benzil alkoholi) i trohidroksilnim alkoholom (glicerinom). Struktura sintetisanih plastifikatora potvrđena je primenom elementalne, FT-IR i NMR analize. Proučavane su fizičkomehaničke karakteristike (tvrdoća po Šoru, prekidna jačina i prekidno istezanje) proizvoda od gume, koje se sastoje od 100 phr-a 28%-nog nitril butadien kaučuka (NBR) i 20,7 phr-a plastifikatora na bazi otpadnog PET-a. Dobijeni rezultati su upoređeni sa fizičko-mehaničkim karakteristikama proizvoda dobijenim korišćenjem komercijalnog plastifikatora dioktil-ftalata (DOPa). Procena ekonomskog potnecijala prikazane tehnologije za proizvodnju plastifikatora na bazi otpadnog PET-a izvršena je izradom detaljne tehno-ekonomske analize. Na osnovu određene tačke rentabiliteta doređena je minimalna cena koštanja jedinice proizvoda koja je, uz evidentno smanjen uticaj na životnu sredinu, konkurentna komercijalnom DOP-u.
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Production of rubber plasticizers based on waste PET: Techno-economical aspect
T1  - Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
EP  - 197
IS  - 2
SP  - 189
VL  - 58
DO  - 10.5937/ZasMat1702189R
ER  - 

@article{
author = "Rusmirović, Jelena and Milošević, Dragana and Veličić, Zorica and Karanac, Milica and Kalifa, Mustafa and Nikolić, Jovana and Marinković, Aleksandar",
year = "2017",
abstract = "Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), didecyl terephthalate (DDTP), dibenzyl terephthalate(DBTP) and diglyceryl terephthalate(DGTP), were obtained by catalytic depolymerization of PET with isononyl alcohol, decyl alcohol, benzyl alcohol and glycerol. The structural analysis of the synthesized plasticizers was done using elemental, FTIR and NMR spectral analysis. Physical-mechanical properties of the rubber products composed of 100 phr of 28 % nitrile butadiene caoutchouc (NBR) and 20.7 phr of plasticizer were investigated. Influence of the synthesized plasticizers on Shore hardness, breaking strength and elongation at break was investigated. Obtained results were compared with ones obtained for commercial plasticizer dioctyl phthatale (DOP). Evaluation of economic potential of new technology for plasticizers production, i.e. results of techno-economic analysis, was presented. Benefits of the presented technology was based on the use of waste PET which is related to both environmental protection and profitability aspects., U radu je predstavljen postupak sinteze plastifikatora na bazi otpadnog poli(etilen tereftalata) (PET-a), kao i ekonomičnost razvijene tehnologije. Plastifikatori na bazi otpadnog PET-a: diizononil-tereftalat (DINTP), didecil-tereftalat (DDTP), dibenzil-tereftalat (DBTP) i digliceriltereftalat (DGTP) dobijeni su katalitičkom depolimerizacijom PET-a monohidroksilnim alkoholima (izononil, decil i benzil alkoholi) i trohidroksilnim alkoholom (glicerinom). Struktura sintetisanih plastifikatora potvrđena je primenom elementalne, FT-IR i NMR analize. Proučavane su fizičkomehaničke karakteristike (tvrdoća po Šoru, prekidna jačina i prekidno istezanje) proizvoda od gume, koje se sastoje od 100 phr-a 28%-nog nitril butadien kaučuka (NBR) i 20,7 phr-a plastifikatora na bazi otpadnog PET-a. Dobijeni rezultati su upoređeni sa fizičko-mehaničkim karakteristikama proizvoda dobijenim korišćenjem komercijalnog plastifikatora dioktil-ftalata (DOPa). Procena ekonomskog potnecijala prikazane tehnologije za proizvodnju plastifikatora na bazi otpadnog PET-a izvršena je izradom detaljne tehno-ekonomske analize. Na osnovu određene tačke rentabiliteta doređena je minimalna cena koštanja jedinice proizvoda koja je, uz evidentno smanjen uticaj na životnu sredinu, konkurentna komercijalnom DOP-u.",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Production of rubber plasticizers based on waste PET: Techno-economical aspect, Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza",
pages = "197-189",
number = "2",
volume = "58",
doi = "10.5937/ZasMat1702189R"
}

Rusmirović, J., Milošević, D., Veličić, Z., Karanac, M., Kalifa, M., Nikolić, J.,& Marinković, A.. (2017). Production of rubber plasticizers based on waste PET: Techno-economical aspect. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 58(2), 189-197.
https://doi.org/10.5937/ZasMat1702189R

Rusmirović J, Milošević D, Veličić Z, Karanac M, Kalifa M, Nikolić J, Marinković A. Production of rubber plasticizers based on waste PET: Techno-economical aspect. in Zaštita materijala. 2017;58(2):189-197.
doi:10.5937/ZasMat1702189R .

Rusmirović, Jelena, Milošević, Dragana, Veličić, Zorica, Karanac, Milica, Kalifa, Mustafa, Nikolić, Jovana, Marinković, Aleksandar, "Production of rubber plasticizers based on waste PET: Techno-economical aspect" in Zaštita materijala, 58, no. 2 (2017):189-197,
https://doi.org/10.5937/ZasMat1702189R . .

TY  - JOUR
AU  - Budimirović, Dragoslav
AU  - Veličković, Zlate
AU  - Bajić, Zoran
AU  - Milošević, Dragana
AU  - Nikolić, Jasmina
AU  - Drmanić, Saša
AU  - Marinković, Aleksandar
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3679
AB  - The multistage synthesis of the multi-wall carbon nanotubes (MWCNT) modified with polyamidoamine dendrimers, A1/and A2/MWCNT, capable of cation removal, is presented in this work, as well as novel adsorbents based on these precursor materials and modified with goethite nano-deposit, alpha-FeOOH, A1/ and A2/MWCNT-alpha-FeO(OH) adsorbents used for As(V) removal. In a batch test, the influence of pH, contact time, initial ion concentration and temperature on adsorption efficiency were studied. Adsorption data modelling by the Langmuir isotherm, revealed good adsorption capacities (in mg g(-1)) of 18.8 for As(V) and 60.1 and 44.2 for Pb2+ and Cd2+ on A2/MWCNT, respectively. Also, 27.6 and 29.8 mg g(-1) of As(V) on A1/ and A2/MWCNT-alpha-FeO(OH), respectively, were removed. Thermodynamic parameters showed that the adsorption is spontaneous and endothermic processes. Results of the study of influences of competitive ions: bicarbonate, sulfate, phosphate, silicate, chromate, fluoride and natural organic matter (NOM), i.e., humic acid (HA), showed the highest effect of phosphate on the decrease of arsenate adsorption. Time-dependent adsorption was best described by pseudo-second-order kinetic model and Weber-Morris model which predicted intra-particle diffusion as a rate-controlling step. Also, activation energy (E-a/kJ mol(-1)): 8.85 for Cd2+, 9.25 for Pb2+ and 7.98 for As(V), were obtained from kinetic data.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - Removal of heavy metals from water using multistage functionalized multiwall carbon nanotubes
EP  - 1191
IS  - 10
SP  - 1175
VL  - 82
DO  - 10.2298/JSC170422066B
ER  - 

@article{
author = "Budimirović, Dragoslav and Veličković, Zlate and Bajić, Zoran and Milošević, Dragana and Nikolić, Jasmina and Drmanić, Saša and Marinković, Aleksandar",
year = "2017",
abstract = "The multistage synthesis of the multi-wall carbon nanotubes (MWCNT) modified with polyamidoamine dendrimers, A1/and A2/MWCNT, capable of cation removal, is presented in this work, as well as novel adsorbents based on these precursor materials and modified with goethite nano-deposit, alpha-FeOOH, A1/ and A2/MWCNT-alpha-FeO(OH) adsorbents used for As(V) removal. In a batch test, the influence of pH, contact time, initial ion concentration and temperature on adsorption efficiency were studied. Adsorption data modelling by the Langmuir isotherm, revealed good adsorption capacities (in mg g(-1)) of 18.8 for As(V) and 60.1 and 44.2 for Pb2+ and Cd2+ on A2/MWCNT, respectively. Also, 27.6 and 29.8 mg g(-1) of As(V) on A1/ and A2/MWCNT-alpha-FeO(OH), respectively, were removed. Thermodynamic parameters showed that the adsorption is spontaneous and endothermic processes. Results of the study of influences of competitive ions: bicarbonate, sulfate, phosphate, silicate, chromate, fluoride and natural organic matter (NOM), i.e., humic acid (HA), showed the highest effect of phosphate on the decrease of arsenate adsorption. Time-dependent adsorption was best described by pseudo-second-order kinetic model and Weber-Morris model which predicted intra-particle diffusion as a rate-controlling step. Also, activation energy (E-a/kJ mol(-1)): 8.85 for Cd2+, 9.25 for Pb2+ and 7.98 for As(V), were obtained from kinetic data.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "Removal of heavy metals from water using multistage functionalized multiwall carbon nanotubes",
pages = "1191-1175",
number = "10",
volume = "82",
doi = "10.2298/JSC170422066B"
}

Budimirović, D., Veličković, Z., Bajić, Z., Milošević, D., Nikolić, J., Drmanić, S.,& Marinković, A.. (2017). Removal of heavy metals from water using multistage functionalized multiwall carbon nanotubes. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 82(10), 1175-1191.
https://doi.org/10.2298/JSC170422066B

Budimirović D, Veličković Z, Bajić Z, Milošević D, Nikolić J, Drmanić S, Marinković A. Removal of heavy metals from water using multistage functionalized multiwall carbon nanotubes. in Journal of the Serbian Chemical Society. 2017;82(10):1175-1191.
doi:10.2298/JSC170422066B .

Budimirović, Dragoslav, Veličković, Zlate, Bajić, Zoran, Milošević, Dragana, Nikolić, Jasmina, Drmanić, Saša, Marinković, Aleksandar, "Removal of heavy metals from water using multistage functionalized multiwall carbon nanotubes" in Journal of the Serbian Chemical Society, 82, no. 10 (2017):1175-1191,
https://doi.org/10.2298/JSC170422066B . .