TY  - JOUR
AU  - Milošević, Ksenija
AU  - Lončarević, Davor
AU  - Mudrinić, Tihana
AU  - Kalagasidis Krušić, Melina
AU  - Dostanić, Jasmina
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5803
AB  - The visible-light-active heterojunctions based on TiO2 were extensively investigated due to their wide range of energy and environment applications. In this study, g-C3N4/titanate heterojunction photocatalyst was successfully prepared by a simple one-step calcination route from melamine and hydrothermally prepared titanates. The photocatalyst was characterized by different physicochemical methods, e.g., X-ray diffraction (XRD), scanning electron microscopy (SEM), and N2 physisorption analysis. The photocatalytic efficiency of synthesized photocatalyst was evaluated by single and simultaneous degradation of methylene blue (MB) and orange G (OG) dyes under solar and visible light irradiation. The photocatalyst exhibited improved visible light activity due to the efficient separation of photogenerated charge carriers and enhanced visible light absorption. The degradation of MB was examined under different reaction conditions to assess the influence of initial MB concentration, catalyst loading, and pH on the degradation kinetics. Dye degradation study in the single and binary dye systems revealed that adsorption was limiting step that governs the pollutant degradation order. Radical trapping experiments were performed using different types of scavengers to highlight the difference in photochemical reactions and mechanism of MB and OG dye degradation under different light irradiation. Comparison of the reaction pathways under visible and solar light irradiation supported with determined bandgap edges and photoluminescence (PL) analysis suggested that the g-C3N4/titanate heterojunction belonged to the type II heterojunction.
PB  - Springer Science and Business Media B.V.
T2  - Journal of Nanoparticle Research
T1  - Mechanistic insights into the simultaneous visible-light induced photodegradation of organic pollutants by g-C3N4/titanate heterojunction
IS  - 2
SP  - 26
VL  - 25
DO  - 10.1007/s11051-023-05673-x
ER  - 

@article{
author = "Milošević, Ksenija and Lončarević, Davor and Mudrinić, Tihana and Kalagasidis Krušić, Melina and Dostanić, Jasmina",
year = "2023",
abstract = "The visible-light-active heterojunctions based on TiO2 were extensively investigated due to their wide range of energy and environment applications. In this study, g-C3N4/titanate heterojunction photocatalyst was successfully prepared by a simple one-step calcination route from melamine and hydrothermally prepared titanates. The photocatalyst was characterized by different physicochemical methods, e.g., X-ray diffraction (XRD), scanning electron microscopy (SEM), and N2 physisorption analysis. The photocatalytic efficiency of synthesized photocatalyst was evaluated by single and simultaneous degradation of methylene blue (MB) and orange G (OG) dyes under solar and visible light irradiation. The photocatalyst exhibited improved visible light activity due to the efficient separation of photogenerated charge carriers and enhanced visible light absorption. The degradation of MB was examined under different reaction conditions to assess the influence of initial MB concentration, catalyst loading, and pH on the degradation kinetics. Dye degradation study in the single and binary dye systems revealed that adsorption was limiting step that governs the pollutant degradation order. Radical trapping experiments were performed using different types of scavengers to highlight the difference in photochemical reactions and mechanism of MB and OG dye degradation under different light irradiation. Comparison of the reaction pathways under visible and solar light irradiation supported with determined bandgap edges and photoluminescence (PL) analysis suggested that the g-C3N4/titanate heterojunction belonged to the type II heterojunction.",
publisher = "Springer Science and Business Media B.V.",
journal = "Journal of Nanoparticle Research",
title = "Mechanistic insights into the simultaneous visible-light induced photodegradation of organic pollutants by g-C3N4/titanate heterojunction",
number = "2",
pages = "26",
volume = "25",
doi = "10.1007/s11051-023-05673-x"
}

Milošević, K., Lončarević, D., Mudrinić, T., Kalagasidis Krušić, M.,& Dostanić, J.. (2023). Mechanistic insights into the simultaneous visible-light induced photodegradation of organic pollutants by g-C3N4/titanate heterojunction. in Journal of Nanoparticle Research
Springer Science and Business Media B.V.., 25(2), 26.
https://doi.org/10.1007/s11051-023-05673-x

Milošević K, Lončarević D, Mudrinić T, Kalagasidis Krušić M, Dostanić J. Mechanistic insights into the simultaneous visible-light induced photodegradation of organic pollutants by g-C3N4/titanate heterojunction. in Journal of Nanoparticle Research. 2023;25(2):26.
doi:10.1007/s11051-023-05673-x .

Milošević, Ksenija, Lončarević, Davor, Mudrinić, Tihana, Kalagasidis Krušić, Melina, Dostanić, Jasmina, "Mechanistic insights into the simultaneous visible-light induced photodegradation of organic pollutants by g-C3N4/titanate heterojunction" in Journal of Nanoparticle Research, 25, no. 2 (2023):26,
https://doi.org/10.1007/s11051-023-05673-x . .

TY  - JOUR
AU  - Milovanović, Biljana
AU  - Marinović, Sanja
AU  - Vuković, Zorica
AU  - Milutinović-Nikolić, Aleksandra
AU  - Petrović, Rada
AU  - Banković, Predrag
AU  - Mudrinić, Tihana
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5127
AB  - In this paper, the influence of cobalt loading in pillared clay-supported cobalt materials on their electrocatalytic performance toward glucose oxidation was investigated. A series of aluminum-pillared montmorillonite clay (AP) materials with different cobalt loadings (x%CoAP, x = 1, 3, 5, and 10 wt%) was synthesized using the incipient wetness impregnation method. The X-ray powder diffraction (XRPD), inductively coupled plasma optical emission spectroscopy (ICP-OES), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy coupled with energy dispersive X-ray spectrometry (FE-SEM/EDX), high resolution transmission electron microscopy (HR-TEM) coupled with EDX, X-ray photoelectron spectroscopy (XPS), and low temperature N2 physisorption, were employed for characterization of the materials. The incorporation of cobalt in porous structure of pillared montmorillonite was confirmed. The synthesized materials (x%CoAP) were used for modification of carbon paste (CP) electrode and tested in reaction of glucose electrooxidation. The electrochemical measurements were conducted using cyclic voltammetry and chronoamperometry in a 1 M NaOH solution, with or without glucose. The results showed that the increase of cobalt loading improved the electrode performance toward glucose. The highest current response and sensitivity were obtained for the CP-5%CoAP electrode. A lower electrode performance of CP-10%CoAP was correlated with the presence of higher quantities of Co3O4 (confirmed by XRPD and XPS) in the electrode material. The mechanism and kinetics of glucose electrooxidation was studied in more details for the best performing electrode (CP-5%CoAP). It was found that the process was diffusion-controlled and the diffusion coefficient was determined. The charge transfer coefficient and catalytic rate constant were calculated. The electrode exhibited satisfactory repeatability, reproducibility, stability, and selectivity. The obtained results showed that appropriate amount of cobalt loading in pillared clay led to the obtainment of non-enzymatic electrode materials suitable for sustainable and green glucose sensors.
PB  - Elsevier B.V.
T2  - Journal of Electroanalytical Chemistry
T1  - The influence of cobalt loading on electrocatalytic performance toward glucose oxidation of pillared montmorillonite-supported cobalt
SP  - 116332
VL  - 915
DO  - 10.1016/j.jelechem.2022.116332
ER  - 

@article{
author = "Milovanović, Biljana and Marinović, Sanja and Vuković, Zorica and Milutinović-Nikolić, Aleksandra and Petrović, Rada and Banković, Predrag and Mudrinić, Tihana",
year = "2022",
abstract = "In this paper, the influence of cobalt loading in pillared clay-supported cobalt materials on their electrocatalytic performance toward glucose oxidation was investigated. A series of aluminum-pillared montmorillonite clay (AP) materials with different cobalt loadings (x%CoAP, x = 1, 3, 5, and 10 wt%) was synthesized using the incipient wetness impregnation method. The X-ray powder diffraction (XRPD), inductively coupled plasma optical emission spectroscopy (ICP-OES), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy coupled with energy dispersive X-ray spectrometry (FE-SEM/EDX), high resolution transmission electron microscopy (HR-TEM) coupled with EDX, X-ray photoelectron spectroscopy (XPS), and low temperature N2 physisorption, were employed for characterization of the materials. The incorporation of cobalt in porous structure of pillared montmorillonite was confirmed. The synthesized materials (x%CoAP) were used for modification of carbon paste (CP) electrode and tested in reaction of glucose electrooxidation. The electrochemical measurements were conducted using cyclic voltammetry and chronoamperometry in a 1 M NaOH solution, with or without glucose. The results showed that the increase of cobalt loading improved the electrode performance toward glucose. The highest current response and sensitivity were obtained for the CP-5%CoAP electrode. A lower electrode performance of CP-10%CoAP was correlated with the presence of higher quantities of Co3O4 (confirmed by XRPD and XPS) in the electrode material. The mechanism and kinetics of glucose electrooxidation was studied in more details for the best performing electrode (CP-5%CoAP). It was found that the process was diffusion-controlled and the diffusion coefficient was determined. The charge transfer coefficient and catalytic rate constant were calculated. The electrode exhibited satisfactory repeatability, reproducibility, stability, and selectivity. The obtained results showed that appropriate amount of cobalt loading in pillared clay led to the obtainment of non-enzymatic electrode materials suitable for sustainable and green glucose sensors.",
publisher = "Elsevier B.V.",
journal = "Journal of Electroanalytical Chemistry",
title = "The influence of cobalt loading on electrocatalytic performance toward glucose oxidation of pillared montmorillonite-supported cobalt",
pages = "116332",
volume = "915",
doi = "10.1016/j.jelechem.2022.116332"
}

Milovanović, B., Marinović, S., Vuković, Z., Milutinović-Nikolić, A., Petrović, R., Banković, P.,& Mudrinić, T.. (2022). The influence of cobalt loading on electrocatalytic performance toward glucose oxidation of pillared montmorillonite-supported cobalt. in Journal of Electroanalytical Chemistry
Elsevier B.V.., 915, 116332.
https://doi.org/10.1016/j.jelechem.2022.116332

Milovanović B, Marinović S, Vuković Z, Milutinović-Nikolić A, Petrović R, Banković P, Mudrinić T. The influence of cobalt loading on electrocatalytic performance toward glucose oxidation of pillared montmorillonite-supported cobalt. in Journal of Electroanalytical Chemistry. 2022;915:116332.
doi:10.1016/j.jelechem.2022.116332 .

Milovanović, Biljana, Marinović, Sanja, Vuković, Zorica, Milutinović-Nikolić, Aleksandra, Petrović, Rada, Banković, Predrag, Mudrinić, Tihana, "The influence of cobalt loading on electrocatalytic performance toward glucose oxidation of pillared montmorillonite-supported cobalt" in Journal of Electroanalytical Chemistry, 915 (2022):116332,
https://doi.org/10.1016/j.jelechem.2022.116332 . .

TY  - JOUR
AU  - Marković, Marija
AU  - Marinović, Sanja
AU  - Mudrinić, Tihana
AU  - Ajduković, Marija
AU  - Jović-Jovičić, Nataša
AU  - Mojović, Zorica
AU  - Orlić, Jovana
AU  - Milutinović Nikolić, Aleksandra
AU  - Banković, Predrag
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5883
AB  - Aluminum pillared clay was synthesized and impregnated with Co2+ (CoAP), using incipient wetness impregnation method. The obtained CoAP was characterized by chemical analysis, XRPD, SEM with EDS, XPS and low temperature N2 physisorption. By these methods the incorporation of Co2+ was confirmed in both micro and mesoporous region. The synthesized material was investigated as a catalyst in catalytic oxidation of organic water pollutants – dyes – in the presence of Oxone® (peroxymonosulfate). Oxone® is a precursor of sulfate radicals. Tartrazine was chosen as a model dye pollutant. The influence of the mass of the catalyst, temperature and initial pH was investigated. Temperature increase was beneficial for dye degradation rate. The reaction rate was the highest for initial pH values around those corresponding to neutral conditions, somewhat slower for pH < 4 values, while for pH > 10 decolorization was significantly less expressed. Along with decolorization of tartrazine solution the formation and degradation of tartrazine catalytic oxidation products were monitored using UV–Vis spectroscopy. CoAP was found to be efficient catalyst in Oxone® induced catalytic degradation of both tartrazine and detected products of its degradation.
PB  - Elsevier
T2  - Applied Clay Science
T1  - Co(II) impregnated Al(III)-pillared montmorillonite–Synthesis, characterization and catalytic properties in Oxone® activation for dye degradation
SP  - 105276
VL  - 182
DO  - 10.1016/j.clay.2019.105276
ER  - 

@article{
author = "Marković, Marija and Marinović, Sanja and Mudrinić, Tihana and Ajduković, Marija and Jović-Jovičić, Nataša and Mojović, Zorica and Orlić, Jovana and Milutinović Nikolić, Aleksandra and Banković, Predrag",
year = "2019",
abstract = "Aluminum pillared clay was synthesized and impregnated with Co2+ (CoAP), using incipient wetness impregnation method. The obtained CoAP was characterized by chemical analysis, XRPD, SEM with EDS, XPS and low temperature N2 physisorption. By these methods the incorporation of Co2+ was confirmed in both micro and mesoporous region. The synthesized material was investigated as a catalyst in catalytic oxidation of organic water pollutants – dyes – in the presence of Oxone® (peroxymonosulfate). Oxone® is a precursor of sulfate radicals. Tartrazine was chosen as a model dye pollutant. The influence of the mass of the catalyst, temperature and initial pH was investigated. Temperature increase was beneficial for dye degradation rate. The reaction rate was the highest for initial pH values around those corresponding to neutral conditions, somewhat slower for pH < 4 values, while for pH > 10 decolorization was significantly less expressed. Along with decolorization of tartrazine solution the formation and degradation of tartrazine catalytic oxidation products were monitored using UV–Vis spectroscopy. CoAP was found to be efficient catalyst in Oxone® induced catalytic degradation of both tartrazine and detected products of its degradation.",
publisher = "Elsevier",
journal = "Applied Clay Science",
title = "Co(II) impregnated Al(III)-pillared montmorillonite–Synthesis, characterization and catalytic properties in Oxone® activation for dye degradation",
pages = "105276",
volume = "182",
doi = "10.1016/j.clay.2019.105276"
}

Marković, M., Marinović, S., Mudrinić, T., Ajduković, M., Jović-Jovičić, N., Mojović, Z., Orlić, J., Milutinović Nikolić, A.,& Banković, P.. (2019). Co(II) impregnated Al(III)-pillared montmorillonite–Synthesis, characterization and catalytic properties in Oxone® activation for dye degradation. in Applied Clay Science
Elsevier., 182, 105276.
https://doi.org/10.1016/j.clay.2019.105276

Marković M, Marinović S, Mudrinić T, Ajduković M, Jović-Jovičić N, Mojović Z, Orlić J, Milutinović Nikolić A, Banković P. Co(II) impregnated Al(III)-pillared montmorillonite–Synthesis, characterization and catalytic properties in Oxone® activation for dye degradation. in Applied Clay Science. 2019;182:105276.
doi:10.1016/j.clay.2019.105276 .

Marković, Marija, Marinović, Sanja, Mudrinić, Tihana, Ajduković, Marija, Jović-Jovičić, Nataša, Mojović, Zorica, Orlić, Jovana, Milutinović Nikolić, Aleksandra, Banković, Predrag, "Co(II) impregnated Al(III)-pillared montmorillonite–Synthesis, characterization and catalytic properties in Oxone® activation for dye degradation" in Applied Clay Science, 182 (2019):105276,
https://doi.org/10.1016/j.clay.2019.105276 . .

TY  - JOUR
AU  - Marković, Marija
AU  - Marinović, Sanja
AU  - Mudrinić, Tihana
AU  - Mojović, Zorica
AU  - Ajduković, Marija
AU  - Milutinović-Nikolić, Aleksandra
AU  - Banković, Predrag
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3913
AB  - Aluminum pillared montmorillonite impregnated with cobalt (CoAP) was synthe-sized and characterized using chemical analysis, XRD and N-2-physisorption. CoAP was tested as a catalyst in the peroxymonosulfate (Oxone (R)) induced catalytic degradation of tartrazine. The influence of Oxone (R)/catalyst ratio and temperature on CoAP catalytic performance was investigated. The UV-Vis spectra obtained after predetermined periods of time of reaction were analyzed in order for tartrazine solution composition to be monitored. The reaction was more efficient at 50 degrees C than at 30 degrees C and the presence of new peaks for the reaction at 50 degrees C was observed. The peaks were deconvoluted and further analyzed. The intensity of two characteristic peaks gradually decreased during the investigated reaction following the first order kinetics. Newly formed peaks indicated the formation of degradation products. The initial increase of the intensity of some of them was followed by certain decrease as the reaction proceeded. CoAP was found to be efficient catalyst in Oxone (R) induced catalytic decolorization of tartrazine. The degradation of different products formed in tartrazine oxidation was evidenced.
PB  - Springer, Dordrecht
T2  - Reaction Kinetics Mechanisms and Catalysis
T1  - Cobalt impregnated pillared montmorillonite in the peroxymonosulfate induced catalytic oxidation of tartrazine
EP  - 841
IS  - 2
SP  - 827
VL  - 125
DO  - 10.1007/s11144-018-1466-1
ER  - 

@article{
author = "Marković, Marija and Marinović, Sanja and Mudrinić, Tihana and Mojović, Zorica and Ajduković, Marija and Milutinović-Nikolić, Aleksandra and Banković, Predrag",
year = "2018",
abstract = "Aluminum pillared montmorillonite impregnated with cobalt (CoAP) was synthe-sized and characterized using chemical analysis, XRD and N-2-physisorption. CoAP was tested as a catalyst in the peroxymonosulfate (Oxone (R)) induced catalytic degradation of tartrazine. The influence of Oxone (R)/catalyst ratio and temperature on CoAP catalytic performance was investigated. The UV-Vis spectra obtained after predetermined periods of time of reaction were analyzed in order for tartrazine solution composition to be monitored. The reaction was more efficient at 50 degrees C than at 30 degrees C and the presence of new peaks for the reaction at 50 degrees C was observed. The peaks were deconvoluted and further analyzed. The intensity of two characteristic peaks gradually decreased during the investigated reaction following the first order kinetics. Newly formed peaks indicated the formation of degradation products. The initial increase of the intensity of some of them was followed by certain decrease as the reaction proceeded. CoAP was found to be efficient catalyst in Oxone (R) induced catalytic decolorization of tartrazine. The degradation of different products formed in tartrazine oxidation was evidenced.",
publisher = "Springer, Dordrecht",
journal = "Reaction Kinetics Mechanisms and Catalysis",
title = "Cobalt impregnated pillared montmorillonite in the peroxymonosulfate induced catalytic oxidation of tartrazine",
pages = "841-827",
number = "2",
volume = "125",
doi = "10.1007/s11144-018-1466-1"
}

Marković, M., Marinović, S., Mudrinić, T., Mojović, Z., Ajduković, M., Milutinović-Nikolić, A.,& Banković, P.. (2018). Cobalt impregnated pillared montmorillonite in the peroxymonosulfate induced catalytic oxidation of tartrazine. in Reaction Kinetics Mechanisms and Catalysis
Springer, Dordrecht., 125(2), 827-841.
https://doi.org/10.1007/s11144-018-1466-1

Marković M, Marinović S, Mudrinić T, Mojović Z, Ajduković M, Milutinović-Nikolić A, Banković P. Cobalt impregnated pillared montmorillonite in the peroxymonosulfate induced catalytic oxidation of tartrazine. in Reaction Kinetics Mechanisms and Catalysis. 2018;125(2):827-841.
doi:10.1007/s11144-018-1466-1 .

Marković, Marija, Marinović, Sanja, Mudrinić, Tihana, Mojović, Zorica, Ajduković, Marija, Milutinović-Nikolić, Aleksandra, Banković, Predrag, "Cobalt impregnated pillared montmorillonite in the peroxymonosulfate induced catalytic oxidation of tartrazine" in Reaction Kinetics Mechanisms and Catalysis, 125, no. 2 (2018):827-841,
https://doi.org/10.1007/s11144-018-1466-1 . .