TY  - JOUR
AU  - Mitrović, Tatjana
AU  - Tomić, Nataša M.
AU  - Đukić-Vuković, Aleksandra
AU  - Dohcević-Mitrović, Zorana
AU  - Lazović, Saša
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4532
AB  - Purpose Every advanced oxidation process (AOP) has its limitations in water purification. Novel designs with simultaneous application of different AOPs can offer better solutions for cleaner water. Methods We have comparatively studied two advanced oxidation processes (AOPs) on decolourisation of Reactive Orange 16 (RO 16) azo dye pollutant from water: gas plasma treatment by low power atmospheric pressure plasma using novel plasma needle configuration, and semiconductor heterogeneous photocatalysis using titanium dioxide (TiO2) nanopowders. Additionally, simultaneous application of two advanced oxidation processes on azo dye decolourisation was studied. Results It was found that plasma treatment is very efficient system for the dye removal even for low flow rates (1 slm) of the Ar as feed gas. The presence of 10% of O-2 in Ar flow intensified dye oxidation process and shortened required time for total decolourisation. When plasma and catalyst were simultaneously applied, TiO2 was activated with a few Watts plasma source as well as 300 W UV lamp source. The synergic effect of two AOPs was more pronounced for higher feed gas flow rates, resulting in improved decolourisation efficiency. Conclusion Plasma needle can efficiently remove Reactive Orange 16 azo dye from water with a power consumption of only few Watts. With the addition of TiO2 the removal efficiency is significantly improved. [GRAPHICS] .
PB  - Springer, Dordrecht
T2  - Waste and Biomass Valorization
T1  - Atmospheric Plasma Supported by TiO2 Catalyst for Decolourisation of Reactive Orange 16 Dye in Water
EP  - 6854
IS  - 12
SP  - 6841
VL  - 11
DO  - 10.1007/s12649-019-00928-y
ER  - 

@article{
author = "Mitrović, Tatjana and Tomić, Nataša M. and Đukić-Vuković, Aleksandra and Dohcević-Mitrović, Zorana and Lazović, Saša",
year = "2020",
abstract = "Purpose Every advanced oxidation process (AOP) has its limitations in water purification. Novel designs with simultaneous application of different AOPs can offer better solutions for cleaner water. Methods We have comparatively studied two advanced oxidation processes (AOPs) on decolourisation of Reactive Orange 16 (RO 16) azo dye pollutant from water: gas plasma treatment by low power atmospheric pressure plasma using novel plasma needle configuration, and semiconductor heterogeneous photocatalysis using titanium dioxide (TiO2) nanopowders. Additionally, simultaneous application of two advanced oxidation processes on azo dye decolourisation was studied. Results It was found that plasma treatment is very efficient system for the dye removal even for low flow rates (1 slm) of the Ar as feed gas. The presence of 10% of O-2 in Ar flow intensified dye oxidation process and shortened required time for total decolourisation. When plasma and catalyst were simultaneously applied, TiO2 was activated with a few Watts plasma source as well as 300 W UV lamp source. The synergic effect of two AOPs was more pronounced for higher feed gas flow rates, resulting in improved decolourisation efficiency. Conclusion Plasma needle can efficiently remove Reactive Orange 16 azo dye from water with a power consumption of only few Watts. With the addition of TiO2 the removal efficiency is significantly improved. [GRAPHICS] .",
publisher = "Springer, Dordrecht",
journal = "Waste and Biomass Valorization",
title = "Atmospheric Plasma Supported by TiO2 Catalyst for Decolourisation of Reactive Orange 16 Dye in Water",
pages = "6854-6841",
number = "12",
volume = "11",
doi = "10.1007/s12649-019-00928-y"
}

Mitrović, T., Tomić, N. M., Đukić-Vuković, A., Dohcević-Mitrović, Z.,& Lazović, S.. (2020). Atmospheric Plasma Supported by TiO2 Catalyst for Decolourisation of Reactive Orange 16 Dye in Water. in Waste and Biomass Valorization
Springer, Dordrecht., 11(12), 6841-6854.
https://doi.org/10.1007/s12649-019-00928-y

Mitrović T, Tomić NM, Đukić-Vuković A, Dohcević-Mitrović Z, Lazović S. Atmospheric Plasma Supported by TiO2 Catalyst for Decolourisation of Reactive Orange 16 Dye in Water. in Waste and Biomass Valorization. 2020;11(12):6841-6854.
doi:10.1007/s12649-019-00928-y .

Mitrović, Tatjana, Tomić, Nataša M., Đukić-Vuković, Aleksandra, Dohcević-Mitrović, Zorana, Lazović, Saša, "Atmospheric Plasma Supported by TiO2 Catalyst for Decolourisation of Reactive Orange 16 Dye in Water" in Waste and Biomass Valorization, 11, no. 12 (2020):6841-6854,
https://doi.org/10.1007/s12649-019-00928-y . .

TY  - JOUR
AU  - Golubović, Aleksandar
AU  - Veljković, Ivana
AU  - Scepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Tomić, Nataša M.
AU  - Mijin, Dušan
AU  - Babić, Biljana M.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3436
AB  - Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.
PB  - Savez hemijskih inženjera, Beograd
T2  - Chemical Industry & Chemical Engineering Quarterly
T1  - Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants
EP  - 73
IS  - 1
SP  - 65
VL  - 22
DO  - 10.2298/CICEQ150110020G
ER  - 

@article{
author = "Golubović, Aleksandar and Veljković, Ivana and Scepanović, Maja and Grujić-Brojčin, Mirjana and Tomić, Nataša M. and Mijin, Dušan and Babić, Biljana M.",
year = "2016",
abstract = "Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Chemical Industry & Chemical Engineering Quarterly",
title = "Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants",
pages = "73-65",
number = "1",
volume = "22",
doi = "10.2298/CICEQ150110020G"
}

Golubović, A., Veljković, I., Scepanović, M., Grujić-Brojčin, M., Tomić, N. M., Mijin, D.,& Babić, B. M.. (2016). Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants. in Chemical Industry & Chemical Engineering Quarterly
Savez hemijskih inženjera, Beograd., 22(1), 65-73.
https://doi.org/10.2298/CICEQ150110020G

Golubović A, Veljković I, Scepanović M, Grujić-Brojčin M, Tomić NM, Mijin D, Babić BM. Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants. in Chemical Industry & Chemical Engineering Quarterly. 2016;22(1):65-73.
doi:10.2298/CICEQ150110020G .

Golubović, Aleksandar, Veljković, Ivana, Scepanović, Maja, Grujić-Brojčin, Mirjana, Tomić, Nataša M., Mijin, Dušan, Babić, Biljana M., "Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants" in Chemical Industry & Chemical Engineering Quarterly, 22, no. 1 (2016):65-73,
https://doi.org/10.2298/CICEQ150110020G . .

TY  - JOUR
AU  - Zdravković, Jelena
AU  - Simović, Bojana
AU  - Golubović, Aleksandar
AU  - Poleti, Dejan
AU  - Veljković, Ivana
AU  - Šćepanović, Maja
AU  - Branković, Goran
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5754
AB  - The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
EP  - 1979
IS  - 2
SP  - 1970
VL  - 41
DO  - 10.1016/j.ceramint.2014.08.122
ER  - 

@article{
author = "Zdravković, Jelena and Simović, Bojana and Golubović, Aleksandar and Poleti, Dejan and Veljković, Ivana and Šćepanović, Maja and Branković, Goran",
year = "2015",
abstract = "The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors",
pages = "1979-1970",
number = "2",
volume = "41",
doi = "10.1016/j.ceramint.2014.08.122"
}

Zdravković, J., Simović, B., Golubović, A., Poleti, D., Veljković, I., Šćepanović, M.,& Branković, G.. (2015). Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International
Elsevier Sci Ltd, Oxford., 41(2), 1970-1979.
https://doi.org/10.1016/j.ceramint.2014.08.122

Zdravković J, Simović B, Golubović A, Poleti D, Veljković I, Šćepanović M, Branković G. Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International. 2015;41(2):1970-1979.
doi:10.1016/j.ceramint.2014.08.122 .

Zdravković, Jelena, Simović, Bojana, Golubović, Aleksandar, Poleti, Dejan, Veljković, Ivana, Šćepanović, Maja, Branković, Goran, "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors" in Ceramics International, 41, no. 2 (2015):1970-1979,
https://doi.org/10.1016/j.ceramint.2014.08.122 . .

TY  - JOUR
AU  - Golubović, Aleksandar
AU  - Simović, Bojana
AU  - Scepanović, Maja
AU  - Mijin, Dušan
AU  - Matković, Aleksandar
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2985
AB  - The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor, varying the temperature of calcination (from 500 to 550 degrees C with the step of 10 degrees C). XRPD results have shown that all synthesized nanopowders are dominantly in anatase phase. The analysis of the shift and linewidth of the most intensive anatase E-g Raman mode confirmed the XRPD results and added the presence of small amount of highly disordered brookite phase in all samples. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 1.5 and 4.5 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16). The sample calcined at temperature of 510 degrees C showed the best photocatalytic performance.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties
EP  - 49
IS  - 1
SP  - 41
VL  - 47
DO  - 10.2298/SOS1501041G
ER  - 

@article{
author = "Golubović, Aleksandar and Simović, Bojana and Scepanović, Maja and Mijin, Dušan and Matković, Aleksandar and Grujić-Brojčin, Mirjana and Babić, Biljana M.",
year = "2015",
abstract = "The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor, varying the temperature of calcination (from 500 to 550 degrees C with the step of 10 degrees C). XRPD results have shown that all synthesized nanopowders are dominantly in anatase phase. The analysis of the shift and linewidth of the most intensive anatase E-g Raman mode confirmed the XRPD results and added the presence of small amount of highly disordered brookite phase in all samples. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 1.5 and 4.5 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16). The sample calcined at temperature of 510 degrees C showed the best photocatalytic performance.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties",
pages = "49-41",
number = "1",
volume = "47",
doi = "10.2298/SOS1501041G"
}

Golubović, A., Simović, B., Scepanović, M., Mijin, D., Matković, A., Grujić-Brojčin, M.,& Babić, B. M.. (2015). Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 47(1), 41-49.
https://doi.org/10.2298/SOS1501041G

Golubović A, Simović B, Scepanović M, Mijin D, Matković A, Grujić-Brojčin M, Babić BM. Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties. in Science of Sintering. 2015;47(1):41-49.
doi:10.2298/SOS1501041G .

Golubović, Aleksandar, Simović, Bojana, Scepanović, Maja, Mijin, Dušan, Matković, Aleksandar, Grujić-Brojčin, Mirjana, Babić, Biljana M., "Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties" in Science of Sintering, 47, no. 1 (2015):41-49,
https://doi.org/10.2298/SOS1501041G . .

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Tomić, Nataša
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Veljković, Ivana
AU  - Zdravković, Jelena
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
AU  - Stojadinović, Bojan
AU  - Šćepanović, Maja
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5791
AB  - Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
PB  - Elsevier Ltd.
T2  - Ceramics International
T1  - Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam
EP  - 13418
IS  - 8
SP  - 13409
VL  - 40
DO  - 10.1016/j.ceramint.2014.05.060
ER  - 

@article{
author = "Golubović, Aleksandar V. and Tomić, Nataša and Finčur, Nina L. and Abramović, Biljana F. and Veljković, Ivana and Zdravković, Jelena and Grujić-Brojčin, Mirjana and Babić, Biljana M. and Stojadinović, Bojan and Šćepanović, Maja",
year = "2014",
abstract = "Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
publisher = "Elsevier Ltd.",
journal = "Ceramics International",
title = "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam",
pages = "13418-13409",
number = "8",
volume = "40",
doi = "10.1016/j.ceramint.2014.05.060"
}

Golubović, A. V., Tomić, N., Finčur, N. L., Abramović, B. F., Veljković, I., Zdravković, J., Grujić-Brojčin, M., Babić, B. M., Stojadinović, B.,& Šćepanović, M.. (2014). Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International
Elsevier Ltd.., 40(8), 13409-13418.
https://doi.org/10.1016/j.ceramint.2014.05.060

Golubović AV, Tomić N, Finčur NL, Abramović BF, Veljković I, Zdravković J, Grujić-Brojčin M, Babić BM, Stojadinović B, Šćepanović M. Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International. 2014;40(8):13409-13418.
doi:10.1016/j.ceramint.2014.05.060 .

Golubović, Aleksandar V., Tomić, Nataša, Finčur, Nina L., Abramović, Biljana F., Veljković, Ivana, Zdravković, Jelena, Grujić-Brojčin, Mirjana, Babić, Biljana M., Stojadinović, Bojan, Šćepanović, Maja, "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam" in Ceramics International, 40, no. 8 (2014):13409-13418,
https://doi.org/10.1016/j.ceramint.2014.05.060 . .

TY  - JOUR
AU  - Simović, Bojana
AU  - Golubović, Aleksandar
AU  - Veljković, Ivana
AU  - Poleti, Dejan
AU  - Zdravković, Jelena D.
AU  - Mijin, Dušan
AU  - Bjelajac, Anđelika
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2702
AB  - In this work, zinc oxide powders were obtained by two different techniques: hydro- and solvothermal synthesis starting from Zn(NO3)(2) and Zn(CH3COO)(2), respectively. The influence of synthetic procedure on the structural, microstructural, thermal and photocatalytic properties of the prepared ZnO powders was investigated. Both ZnO samples were further annealed under moderate conditions (300 degrees C) to avoid grain growth and to remove traces of impurities. In all four cases, single-phase hexagonal ZnO was confirmed by X-ray powder diffraction. The morphologies of prepared ZnO powders were different and they varied from rounded nanograins to microrods. All prepared samples showed higher photocatalytic efficiency in the degradation of the textile azo dye Reactive Orange 16 (RO16) than commercial ZnO. In addition, the non-annealed samples had better photocatalytic properties than the commercial Degussa P25 TiO2 powder.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye
EP  - 1443
IS  - 11
SP  - 1433
VL  - 79
DO  - 10.2298/JSC140520077S
ER  - 

@article{
author = "Simović, Bojana and Golubović, Aleksandar and Veljković, Ivana and Poleti, Dejan and Zdravković, Jelena D. and Mijin, Dušan and Bjelajac, Anđelika",
year = "2014",
abstract = "In this work, zinc oxide powders were obtained by two different techniques: hydro- and solvothermal synthesis starting from Zn(NO3)(2) and Zn(CH3COO)(2), respectively. The influence of synthetic procedure on the structural, microstructural, thermal and photocatalytic properties of the prepared ZnO powders was investigated. Both ZnO samples were further annealed under moderate conditions (300 degrees C) to avoid grain growth and to remove traces of impurities. In all four cases, single-phase hexagonal ZnO was confirmed by X-ray powder diffraction. The morphologies of prepared ZnO powders were different and they varied from rounded nanograins to microrods. All prepared samples showed higher photocatalytic efficiency in the degradation of the textile azo dye Reactive Orange 16 (RO16) than commercial ZnO. In addition, the non-annealed samples had better photocatalytic properties than the commercial Degussa P25 TiO2 powder.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye",
pages = "1443-1433",
number = "11",
volume = "79",
doi = "10.2298/JSC140520077S"
}

Simović, B., Golubović, A., Veljković, I., Poleti, D., Zdravković, J. D., Mijin, D.,& Bjelajac, A.. (2014). Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 79(11), 1433-1443.
https://doi.org/10.2298/JSC140520077S

Simović B, Golubović A, Veljković I, Poleti D, Zdravković JD, Mijin D, Bjelajac A. Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye. in Journal of the Serbian Chemical Society. 2014;79(11):1433-1443.
doi:10.2298/JSC140520077S .

Simović, Bojana, Golubović, Aleksandar, Veljković, Ivana, Poleti, Dejan, Zdravković, Jelena D., Mijin, Dušan, Bjelajac, Anđelika, "Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye" in Journal of the Serbian Chemical Society, 79, no. 11 (2014):1433-1443,
https://doi.org/10.2298/JSC140520077S . .

TY  - JOUR
AU  - Tomić, Nataša M.
AU  - Dohcević-Mitrović, Zorana
AU  - Paunović, Novica M.
AU  - Mijin, Dušan
AU  - Radić, Nenad
AU  - Grbić, Boško
AU  - Askrabić, Sonja M.
AU  - Babić, Biljana M.
AU  - Bajuk-Bogdanović, Danica
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2734
AB  - Ultrafine CeO2-delta nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.
PB  - Amer Chemical Soc, Washington
T2  - Langmuir
T1  - Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes
EP  - 11590
IS  - 39
SP  - 11582
VL  - 30
DO  - 10.1021/la502969w
ER  - 

@article{
author = "Tomić, Nataša M. and Dohcević-Mitrović, Zorana and Paunović, Novica M. and Mijin, Dušan and Radić, Nenad and Grbić, Boško and Askrabić, Sonja M. and Babić, Biljana M. and Bajuk-Bogdanović, Danica",
year = "2014",
abstract = "Ultrafine CeO2-delta nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.",
publisher = "Amer Chemical Soc, Washington",
journal = "Langmuir",
title = "Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes",
pages = "11590-11582",
number = "39",
volume = "30",
doi = "10.1021/la502969w"
}

Tomić, N. M., Dohcević-Mitrović, Z., Paunović, N. M., Mijin, D., Radić, N., Grbić, B., Askrabić, S. M., Babić, B. M.,& Bajuk-Bogdanović, D.. (2014). Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes. in Langmuir
Amer Chemical Soc, Washington., 30(39), 11582-11590.
https://doi.org/10.1021/la502969w

Tomić NM, Dohcević-Mitrović Z, Paunović NM, Mijin D, Radić N, Grbić B, Askrabić SM, Babić BM, Bajuk-Bogdanović D. Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes. in Langmuir. 2014;30(39):11582-11590.
doi:10.1021/la502969w .

Tomić, Nataša M., Dohcević-Mitrović, Zorana, Paunović, Novica M., Mijin, Dušan, Radić, Nenad, Grbić, Boško, Askrabić, Sonja M., Babić, Biljana M., Bajuk-Bogdanović, Danica, "Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes" in Langmuir, 30, no. 39 (2014):11582-11590,
https://doi.org/10.1021/la502969w . .