TY  - CONF
AU  - Dimitrijević, Silvana B.
AU  - Ivanović, Aleksandra T.
AU  - Magdalinović, Srđana
AU  - Đorđijevski, Stefan S.
AU  - Dimitrijević, Stevan P.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6800
AB  - Recycling of printed circuit boards (PCBs) is an extremely complex and sensitive process. Physicochemical
characterization of printed circuit boards is significant for choosing the optimal
processing procedure. The aim of this research was the physico-chemical characterization of the
boards and the separated fractions after cutting on a shredder and magnetic separation. Separated
fractions (metal granulate, magnetic fraction, and plastic) were leached in three consecutive phases
by use of sulfuric acid, nitric acid, and aqua regia. The experiments were performed on the
fractions obtained by processing 100 kg of the sample and were compared with the results obtained by the chemical analysis of the sample obtained by manually unfolding 10 PCBs. Also, the grain size analysis of each separated fraction was determined.
AB  - Reciklaža štampanih ploča (PCBs) je izuzetno složen i osetljiv postupak. Fizičko-hemijska karakterizacija štampanih ploča je od velikog značaja zbog izbora optimalnog postupka za preradu. Cilj ovog istraživanja bila je fizičko-hemijska karakterizacija ploča kao i izdvojenih frakcija nakon sečenja na šrederu i magnetne separacije. Izdvojene frakcije (metalni granulat, magnetna frakcija i plastika) su rastvarane u tri uzastopne faze, luženjem, uz korišćenje: sumporne kiseline, azotne kiseline i carske vode. Eksperimenti su izvedeni na frakcijama dobijenim preradom 100 kg uzorka i upoređivani su sa rezultatima dobijenim hemijskom analizom uzorka dobijenog ručnim rasklapanjem 10 ploča. Takođe, određivan je granulo sastav svake izdvojene frakcije.
PB  - Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources
C3  - Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
T1  - PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs
T1  - FIZIČKO-HEMIJSKA KARAKTERIZACIJA ŠTAMPANIH PLOČA
EP  - 339
SP  - 333
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6800
ER  - 

@conference{
author = "Dimitrijević, Silvana B. and Ivanović, Aleksandra T. and Magdalinović, Srđana and Đorđijevski, Stefan S. and Dimitrijević, Stevan P.",
year = "2023",
abstract = "Recycling of printed circuit boards (PCBs) is an extremely complex and sensitive process. Physicochemical
characterization of printed circuit boards is significant for choosing the optimal
processing procedure. The aim of this research was the physico-chemical characterization of the
boards and the separated fractions after cutting on a shredder and magnetic separation. Separated
fractions (metal granulate, magnetic fraction, and plastic) were leached in three consecutive phases
by use of sulfuric acid, nitric acid, and aqua regia. The experiments were performed on the
fractions obtained by processing 100 kg of the sample and were compared with the results obtained by the chemical analysis of the sample obtained by manually unfolding 10 PCBs. Also, the grain size analysis of each separated fraction was determined., Reciklaža štampanih ploča (PCBs) je izuzetno složen i osetljiv postupak. Fizičko-hemijska karakterizacija štampanih ploča je od velikog značaja zbog izbora optimalnog postupka za preradu. Cilj ovog istraživanja bila je fizičko-hemijska karakterizacija ploča kao i izdvojenih frakcija nakon sečenja na šrederu i magnetne separacije. Izdvojene frakcije (metalni granulat, magnetna frakcija i plastika) su rastvarane u tri uzastopne faze, luženjem, uz korišćenje: sumporne kiseline, azotne kiseline i carske vode. Eksperimenti su izvedeni na frakcijama dobijenim preradom 100 kg uzorka i upoređivani su sa rezultatima dobijenim hemijskom analizom uzorka dobijenog ručnim rasklapanjem 10 ploča. Takođe, određivan je granulo sastav svake izdvojene frakcije.",
publisher = "Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023",
title = "PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs, FIZIČKO-HEMIJSKA KARAKTERIZACIJA ŠTAMPANIH PLOČA",
pages = "339-333",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6800"
}

Dimitrijević, S. B., Ivanović, A. T., Magdalinović, S., Đorđijevski, S. S.,& Dimitrijević, S. P.. (2023). PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources., 333-339.
https://hdl.handle.net/21.15107/rcub_technorep_6800

Dimitrijević SB, Ivanović AT, Magdalinović S, Đorđijevski SS, Dimitrijević SP. PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023. 2023;:333-339.
https://hdl.handle.net/21.15107/rcub_technorep_6800 .

Dimitrijević, Silvana B., Ivanović, Aleksandra T., Magdalinović, Srđana, Đorđijevski, Stefan S., Dimitrijević, Stevan P., "PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs" in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023 (2023):333-339,
https://hdl.handle.net/21.15107/rcub_technorep_6800 .

TY  - CONF
AU  - Ivanović, Aleksandra T.
AU  - Dimitrijević, Silvana B.
AU  - Dimitrijević, Stevan P.
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6631
AB  - This paper presents original software, developed for the needs of mathematical modeling of complex processes using the simplex method. The software was developed in the Delphi programming language for the Windows environment. The idea was to use the developed software to determine the efficiency of the simplex method in choosing the optimal mode of heat treatment of PdNi5 alloy, and simplex triangle can visually monitor the legality of the behavior of the test process depending on the influential parameters.
AB  - U radu je predstavljen originalni softver, razvijen za potrebe matematičkog modeliranja složenih procesa primenom simpleks metode. Softver je razvijen u programskom jeziku Delphi za Vindovs okruženje. Ideja je bila da se razvijenim softverom utvrdi efikasnost simpleks metode u izboru optimalnog načina termičke obrade legure PdNi5, a simpleks trouglom se može vizuelno pratiti zakonitost ponašanja procesa ispitivanja u zavisnosti od uticajnih parametara.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije
C3  - Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
T1  - Presentation of software for applying simplex methods
T1  - Prezentacija softvera za primenu simpleks metoda
EP  - 210
IS  - 1
SP  - 207
VL  - 10
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6631
ER  - 

@conference{
author = "Ivanović, Aleksandra T. and Dimitrijević, Silvana B. and Dimitrijević, Stevan P.",
year = "2022",
abstract = "This paper presents original software, developed for the needs of mathematical modeling of complex processes using the simplex method. The software was developed in the Delphi programming language for the Windows environment. The idea was to use the developed software to determine the efficiency of the simplex method in choosing the optimal mode of heat treatment of PdNi5 alloy, and simplex triangle can visually monitor the legality of the behavior of the test process depending on the influential parameters., U radu je predstavljen originalni softver, razvijen za potrebe matematičkog modeliranja složenih procesa primenom simpleks metode. Softver je razvijen u programskom jeziku Delphi za Vindovs okruženje. Ideja je bila da se razvijenim softverom utvrdi efikasnost simpleks metode u izboru optimalnog načina termičke obrade legure PdNi5, a simpleks trouglom se može vizuelno pratiti zakonitost ponašanja procesa ispitivanja u zavisnosti od uticajnih parametara.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije",
journal = "Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije",
title = "Presentation of software for applying simplex methods, Prezentacija softvera za primenu simpleks metoda",
pages = "210-207",
number = "1",
volume = "10",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6631"
}

Ivanović, A. T., Dimitrijević, S. B.,& Dimitrijević, S. P.. (2022). Presentation of software for applying simplex methods. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije., 10(1), 207-210.
https://hdl.handle.net/21.15107/rcub_technorep_6631

Ivanović AT, Dimitrijević SB, Dimitrijević SP. Presentation of software for applying simplex methods. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije. 2022;10(1):207-210.
https://hdl.handle.net/21.15107/rcub_technorep_6631 .

Ivanović, Aleksandra T., Dimitrijević, Silvana B., Dimitrijević, Stevan P., "Presentation of software for applying simplex methods" in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije, 10, no. 1 (2022):207-210,
https://hdl.handle.net/21.15107/rcub_technorep_6631 .