TY  - JOUR
AU  - Golubović, Aleksandar
AU  - Veljković, Ivana
AU  - Scepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Tomić, Nataša M.
AU  - Mijin, Dušan
AU  - Babić, Biljana M.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3436
AB  - Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.
PB  - Savez hemijskih inženjera, Beograd
T2  - Chemical Industry & Chemical Engineering Quarterly
T1  - Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants
EP  - 73
IS  - 1
SP  - 65
VL  - 22
DO  - 10.2298/CICEQ150110020G
ER  - 

@article{
author = "Golubović, Aleksandar and Veljković, Ivana and Scepanović, Maja and Grujić-Brojčin, Mirjana and Tomić, Nataša M. and Mijin, Dušan and Babić, Biljana M.",
year = "2016",
abstract = "Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Chemical Industry & Chemical Engineering Quarterly",
title = "Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants",
pages = "73-65",
number = "1",
volume = "22",
doi = "10.2298/CICEQ150110020G"
}

Golubović, A., Veljković, I., Scepanović, M., Grujić-Brojčin, M., Tomić, N. M., Mijin, D.,& Babić, B. M.. (2016). Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants. in Chemical Industry & Chemical Engineering Quarterly
Savez hemijskih inženjera, Beograd., 22(1), 65-73.
https://doi.org/10.2298/CICEQ150110020G

Golubović A, Veljković I, Scepanović M, Grujić-Brojčin M, Tomić NM, Mijin D, Babić BM. Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants. in Chemical Industry & Chemical Engineering Quarterly. 2016;22(1):65-73.
doi:10.2298/CICEQ150110020G .

Golubović, Aleksandar, Veljković, Ivana, Scepanović, Maja, Grujić-Brojčin, Mirjana, Tomić, Nataša M., Mijin, Dušan, Babić, Biljana M., "Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants" in Chemical Industry & Chemical Engineering Quarterly, 22, no. 1 (2016):65-73,
https://doi.org/10.2298/CICEQ150110020G . .

TY  - JOUR
AU  - Zdravković, Jelena
AU  - Simović, Bojana
AU  - Golubović, Aleksandar
AU  - Poleti, Dejan
AU  - Veljković, Ivana
AU  - Šćepanović, Maja
AU  - Branković, Goran
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5754
AB  - The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
EP  - 1979
IS  - 2
SP  - 1970
VL  - 41
DO  - 10.1016/j.ceramint.2014.08.122
ER  - 

@article{
author = "Zdravković, Jelena and Simović, Bojana and Golubović, Aleksandar and Poleti, Dejan and Veljković, Ivana and Šćepanović, Maja and Branković, Goran",
year = "2015",
abstract = "The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors",
pages = "1979-1970",
number = "2",
volume = "41",
doi = "10.1016/j.ceramint.2014.08.122"
}

Zdravković, J., Simović, B., Golubović, A., Poleti, D., Veljković, I., Šćepanović, M.,& Branković, G.. (2015). Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International
Elsevier Sci Ltd, Oxford., 41(2), 1970-1979.
https://doi.org/10.1016/j.ceramint.2014.08.122

Zdravković J, Simović B, Golubović A, Poleti D, Veljković I, Šćepanović M, Branković G. Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International. 2015;41(2):1970-1979.
doi:10.1016/j.ceramint.2014.08.122 .

Zdravković, Jelena, Simović, Bojana, Golubović, Aleksandar, Poleti, Dejan, Veljković, Ivana, Šćepanović, Maja, Branković, Goran, "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors" in Ceramics International, 41, no. 2 (2015):1970-1979,
https://doi.org/10.1016/j.ceramint.2014.08.122 . .