TY  - JOUR
AU  - Milosević, Dragana L.
AU  - Tomić, Nataša
AU  - Đokić, Veljko
AU  - Vidović, Milka
AU  - Veličković, Zlate
AU  - Jančić-Heinemann, Radmila
AU  - Marinković, Aleksandar
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4506
AB  - The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3 and FeAl(2)O(3)APTES, was used for enhanced Pb2+, Cd2+ and Ni2+ removal. The phase composition and the structural and surface/textural properties of the obtained adsorbents were analyzed by X-ray diffraction analysis, field emission scanning electron microscope, energy dispersive X-ray analysis, thermogravimetry, Fourier-transfer infrared spectroscopy, specific surface area of the samples and point of zero charge determination. Adsorption of selected cations was examined in the batch conditions using different contact time, adsorbent dosage and temperatures. Different models of the adsorption isotherms were used for determination of the adsorption capacities, in which the best fit of Freundlich and Langmuir model was obtained for FeAl2O3, that is, Freundlich model for FeAl(2)O(3)APTES. A significant increase of adsorption capacities: from 44.21 to 51.66 mg g(-1) for Pb2+, 25.69 to 32.96 mg g(-1) for Cd2+ and 19.48 to 24.64 mg g(-1) for Ni2+ was obtained for FeAl2O3 and FeAl(2)O(3)APTES, respectively, which indicated the significance of the macroporous structure of 3DOM alumina and subsequent amino-terminal modification. The values of the correlation coefficient (R-2) suggested that pseudo-second kinetic model best describes Pb2+, Cd2+ and Ni2+ adsorption on FeAl(2)O(3)APTES, and Cd2+ and Ni2+ onto FeAl2O3, while second kinetic model gave the highest correlation coefficients for Pb2+ adsorption on FeAl2O3.
PB  - Desalination Publ, Hopkinton
T2  - Desalination and Water Treatment
T1  - Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution
EP  - 239
SP  - 220
VL  - 178
DO  - 10.5004/dwt.2020.24982
ER  - 

@article{
author = "Milosević, Dragana L. and Tomić, Nataša and Đokić, Veljko and Vidović, Milka and Veličković, Zlate and Jančić-Heinemann, Radmila and Marinković, Aleksandar",
year = "2020",
abstract = "The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3 and FeAl(2)O(3)APTES, was used for enhanced Pb2+, Cd2+ and Ni2+ removal. The phase composition and the structural and surface/textural properties of the obtained adsorbents were analyzed by X-ray diffraction analysis, field emission scanning electron microscope, energy dispersive X-ray analysis, thermogravimetry, Fourier-transfer infrared spectroscopy, specific surface area of the samples and point of zero charge determination. Adsorption of selected cations was examined in the batch conditions using different contact time, adsorbent dosage and temperatures. Different models of the adsorption isotherms were used for determination of the adsorption capacities, in which the best fit of Freundlich and Langmuir model was obtained for FeAl2O3, that is, Freundlich model for FeAl(2)O(3)APTES. A significant increase of adsorption capacities: from 44.21 to 51.66 mg g(-1) for Pb2+, 25.69 to 32.96 mg g(-1) for Cd2+ and 19.48 to 24.64 mg g(-1) for Ni2+ was obtained for FeAl2O3 and FeAl(2)O(3)APTES, respectively, which indicated the significance of the macroporous structure of 3DOM alumina and subsequent amino-terminal modification. The values of the correlation coefficient (R-2) suggested that pseudo-second kinetic model best describes Pb2+, Cd2+ and Ni2+ adsorption on FeAl(2)O(3)APTES, and Cd2+ and Ni2+ onto FeAl2O3, while second kinetic model gave the highest correlation coefficients for Pb2+ adsorption on FeAl2O3.",
publisher = "Desalination Publ, Hopkinton",
journal = "Desalination and Water Treatment",
title = "Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution",
pages = "239-220",
volume = "178",
doi = "10.5004/dwt.2020.24982"
}

Milosević, D. L., Tomić, N., Đokić, V., Vidović, M., Veličković, Z., Jančić-Heinemann, R.,& Marinković, A.. (2020). Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution. in Desalination and Water Treatment
Desalination Publ, Hopkinton., 178, 220-239.
https://doi.org/10.5004/dwt.2020.24982

Milosević DL, Tomić N, Đokić V, Vidović M, Veličković Z, Jančić-Heinemann R, Marinković A. Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution. in Desalination and Water Treatment. 2020;178:220-239.
doi:10.5004/dwt.2020.24982 .

Milosević, Dragana L., Tomić, Nataša, Đokić, Veljko, Vidović, Milka, Veličković, Zlate, Jančić-Heinemann, Radmila, Marinković, Aleksandar, "Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution" in Desalination and Water Treatment, 178 (2020):220-239,
https://doi.org/10.5004/dwt.2020.24982 . .

TY  - JOUR
AU  - Milošević, Milena D.
AU  - Daničić, Dunja
AU  - Kovačina, Jovanka N.
AU  - Bugarčić, Mladen
AU  - Rusmirović, Jelena
AU  - Kovačević, Tihomir
AU  - Marinković, Aleksandar
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4271
AB  - The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin modification were applied: direct method using ammonium hydroxide, ammonium hydroxide/ammonium chloride buffer or diethylenetriamine (DETA); and a two-step method including tannin modification with epichlorohydrin (ECH) in first step to produce epoxy modified tannin, ET, and further modification with heteroaromatic amines or linseed oil fatty acids (LFA) in second step. The obtained anticorrosive additives were characterized using ATR-FTIR, 1H and 13C NMR spectroscopies and elemental analysis. Epoxy, amino, hydroxyl, acid and iodine values of the synthesized inhibitors were determined according to standard methods. The prepared alkyd coating with tannin inhibitors was tested according to standard SRPS EN ISO 4628 method. Anticorrosive coating containing modified tannin based additive showed increased anticorrosive properties, good adhesion and coverage comparing to the coating with zinc phosphate additive. The alkyd coating films based on ET-LFA and ET modified with 2-amino-5-mercapto-1,3,4-thiadiazole showed best anticorrosive results.
AB  - U ovom radu prikazana je sinteza antikorozionih aditiva na bazi hemijski modifikovanog tanina i njihova primena u alkidnim premazima u cilju poboljšanja antikorozionih svojstava. Prikazane su dve metode modifikacije tanina: direktna modifikacija tanina primenom amonijum-hidroksida, amonijum-hidroksid/amonijum-hlorid pufera ili dietilentriamina (DETA); i dvostepena modifikacija tanina koja u prvom stupnju uključuje modifikaciju epihlorhidrinom sa ciljem da se dobije tannin sa epoksi terminiranim funkcionalnim grupama, ET, i modifikaciju ET tanina sa heteroaromatičnim aminima ili masnim kiselinama izolovanim iz lanenog ulja (LFA) u drugom stupnju. Sintetisani antikorozioni aditivi su okarakterisani primenom ATR-FTIR, 1H i 13C NMR spektroskopija, i elementalnom analizom. Sadržaj epoksi, amino, hidroksilnih i karboksilnih grupa i vrednost jodnog broja sintetisanih aditiva određen je prema standardnim metodama. Alkidni premazi koji sadrže antikorozione aditive na bazi modifikovanog tanina ispitani su prema standardnoj SRPS EN ISO 4628 metodi. Antikorozivni alkidni premazi na bazi modfikovanih tanina pokazali su poboljšane antikorozione karakteristike i adheziju u poređenju sa alkidnim premazom na bazi cink-fosfata. Alkidni premazi koji sadrže dvostepeno modifikovani tanin sa LFA i 2-amino-5-merkapto-1,3,4-tiadiazolom pokazali su najbolje antikorozione karakteristike.
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Modified tannins for alkyd based anticorrosive coatings
T1  - Primena modifikovanih tanina u antikorozionim alkidnim premazima
EP  - 95
IS  - 1
SP  - 81
VL  - 60
DO  - 10.5937/zasmat1901081M
ER  - 

@article{
author = "Milošević, Milena D. and Daničić, Dunja and Kovačina, Jovanka N. and Bugarčić, Mladen and Rusmirović, Jelena and Kovačević, Tihomir and Marinković, Aleksandar",
year = "2019",
abstract = "The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin modification were applied: direct method using ammonium hydroxide, ammonium hydroxide/ammonium chloride buffer or diethylenetriamine (DETA); and a two-step method including tannin modification with epichlorohydrin (ECH) in first step to produce epoxy modified tannin, ET, and further modification with heteroaromatic amines or linseed oil fatty acids (LFA) in second step. The obtained anticorrosive additives were characterized using ATR-FTIR, 1H and 13C NMR spectroscopies and elemental analysis. Epoxy, amino, hydroxyl, acid and iodine values of the synthesized inhibitors were determined according to standard methods. The prepared alkyd coating with tannin inhibitors was tested according to standard SRPS EN ISO 4628 method. Anticorrosive coating containing modified tannin based additive showed increased anticorrosive properties, good adhesion and coverage comparing to the coating with zinc phosphate additive. The alkyd coating films based on ET-LFA and ET modified with 2-amino-5-mercapto-1,3,4-thiadiazole showed best anticorrosive results., U ovom radu prikazana je sinteza antikorozionih aditiva na bazi hemijski modifikovanog tanina i njihova primena u alkidnim premazima u cilju poboljšanja antikorozionih svojstava. Prikazane su dve metode modifikacije tanina: direktna modifikacija tanina primenom amonijum-hidroksida, amonijum-hidroksid/amonijum-hlorid pufera ili dietilentriamina (DETA); i dvostepena modifikacija tanina koja u prvom stupnju uključuje modifikaciju epihlorhidrinom sa ciljem da se dobije tannin sa epoksi terminiranim funkcionalnim grupama, ET, i modifikaciju ET tanina sa heteroaromatičnim aminima ili masnim kiselinama izolovanim iz lanenog ulja (LFA) u drugom stupnju. Sintetisani antikorozioni aditivi su okarakterisani primenom ATR-FTIR, 1H i 13C NMR spektroskopija, i elementalnom analizom. Sadržaj epoksi, amino, hidroksilnih i karboksilnih grupa i vrednost jodnog broja sintetisanih aditiva određen je prema standardnim metodama. Alkidni premazi koji sadrže antikorozione aditive na bazi modifikovanog tanina ispitani su prema standardnoj SRPS EN ISO 4628 metodi. Antikorozivni alkidni premazi na bazi modfikovanih tanina pokazali su poboljšane antikorozione karakteristike i adheziju u poređenju sa alkidnim premazom na bazi cink-fosfata. Alkidni premazi koji sadrže dvostepeno modifikovani tanin sa LFA i 2-amino-5-merkapto-1,3,4-tiadiazolom pokazali su najbolje antikorozione karakteristike.",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Modified tannins for alkyd based anticorrosive coatings, Primena modifikovanih tanina u antikorozionim alkidnim premazima",
pages = "95-81",
number = "1",
volume = "60",
doi = "10.5937/zasmat1901081M"
}

Milošević, M. D., Daničić, D., Kovačina, J. N., Bugarčić, M., Rusmirović, J., Kovačević, T.,& Marinković, A.. (2019). Modified tannins for alkyd based anticorrosive coatings. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 60(1), 81-95.
https://doi.org/10.5937/zasmat1901081M

Milošević MD, Daničić D, Kovačina JN, Bugarčić M, Rusmirović J, Kovačević T, Marinković A. Modified tannins for alkyd based anticorrosive coatings. in Zaštita materijala. 2019;60(1):81-95.
doi:10.5937/zasmat1901081M .

Milošević, Milena D., Daničić, Dunja, Kovačina, Jovanka N., Bugarčić, Mladen, Rusmirović, Jelena, Kovačević, Tihomir, Marinković, Aleksandar, "Modified tannins for alkyd based anticorrosive coatings" in Zaštita materijala, 60, no. 1 (2019):81-95,
https://doi.org/10.5937/zasmat1901081M . .

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4223
AB  - Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL--APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mossbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456mgg(-1) for WL--APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382mgg(-1) for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL--APS/MG, e.g., 1.17-13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL--APS.
PB  - Springer Heidelberg, Heidelberg
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
EP  - 12398
IS  - 12
SP  - 12379
VL  - 26
DO  - 10.1007/s11356-019-04625-0
ER  - 

@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL--APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mossbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456mgg(-1) for WL--APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382mgg(-1) for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL--APS/MG, e.g., 1.17-13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL--APS.",
publisher = "Springer Heidelberg, Heidelberg",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12398-12379",
number = "12",
volume = "26",
doi = "10.1007/s11356-019-04625-0"
}

Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research
Springer Heidelberg, Heidelberg., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0

Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković A, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0 .

Rusmirović, Jelena, Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar, Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 . .

TY  - JOUR
AU  - Filipović, Vuk
AU  - Božić-Nedeljković, Biljana
AU  - Vukomanović, Marija
AU  - Tomić, Simonida
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3874
AB  - Gelatin hydrogels have great potential in regenerative medicine but their weak mechanical properties are a major drawback for the load-bearing applications, such as scaffolds for tissue engineering. To overcome this deficiency, novel biodegradable hydrogels with improved mechanical properties were prepared by combining gelatine with 2-hydroxyethyl methacrylate (HEMA), using a double network synthetic procedure. The first, superporous and mechanically strong network, was obtained by free radical polymerization of HEMA at cryogenic temperature, in the presence of gelatin. Degradable poly (beta-amino ester) (PBAE) macromers of different chemical composition or molecular weight were used as crosslinkers to introduce hydrolytically labile bonds in PHEMA. The second gelatin network was formed by crosslinking gelatin with glutaraldehyde. For comparison, a set of biodegradable PHEMA networks was obtained by polymerization of HEMA at cryogenic temperature. All samples were characterized revealing that mechanical strength, swelling behavior and degradation rate as well as high biocompatibility of new IPNs are in accordance with values required for scaffolds in tissue engineering applications and that tuning of these properties is accomplished by simply using different PBAE macromers.
PB  - Elsevier Sci Ltd, Oxford
T2  - Polymer Testing
T1  - Biocompatible and degradable scaffolds based on 2-hydroxyethyl methacrylate, gelatin and poly(beta amino ester) crosslinkers
EP  - 278
SP  - 270
VL  - 68
DO  - 10.1016/j.polymertesting.2018.04.024
ER  - 

@article{
author = "Filipović, Vuk and Božić-Nedeljković, Biljana and Vukomanović, Marija and Tomić, Simonida",
year = "2018",
abstract = "Gelatin hydrogels have great potential in regenerative medicine but their weak mechanical properties are a major drawback for the load-bearing applications, such as scaffolds for tissue engineering. To overcome this deficiency, novel biodegradable hydrogels with improved mechanical properties were prepared by combining gelatine with 2-hydroxyethyl methacrylate (HEMA), using a double network synthetic procedure. The first, superporous and mechanically strong network, was obtained by free radical polymerization of HEMA at cryogenic temperature, in the presence of gelatin. Degradable poly (beta-amino ester) (PBAE) macromers of different chemical composition or molecular weight were used as crosslinkers to introduce hydrolytically labile bonds in PHEMA. The second gelatin network was formed by crosslinking gelatin with glutaraldehyde. For comparison, a set of biodegradable PHEMA networks was obtained by polymerization of HEMA at cryogenic temperature. All samples were characterized revealing that mechanical strength, swelling behavior and degradation rate as well as high biocompatibility of new IPNs are in accordance with values required for scaffolds in tissue engineering applications and that tuning of these properties is accomplished by simply using different PBAE macromers.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Polymer Testing",
title = "Biocompatible and degradable scaffolds based on 2-hydroxyethyl methacrylate, gelatin and poly(beta amino ester) crosslinkers",
pages = "278-270",
volume = "68",
doi = "10.1016/j.polymertesting.2018.04.024"
}

Filipović, V., Božić-Nedeljković, B., Vukomanović, M.,& Tomić, S.. (2018). Biocompatible and degradable scaffolds based on 2-hydroxyethyl methacrylate, gelatin and poly(beta amino ester) crosslinkers. in Polymer Testing
Elsevier Sci Ltd, Oxford., 68, 270-278.
https://doi.org/10.1016/j.polymertesting.2018.04.024

Filipović V, Božić-Nedeljković B, Vukomanović M, Tomić S. Biocompatible and degradable scaffolds based on 2-hydroxyethyl methacrylate, gelatin and poly(beta amino ester) crosslinkers. in Polymer Testing. 2018;68:270-278.
doi:10.1016/j.polymertesting.2018.04.024 .

Filipović, Vuk, Božić-Nedeljković, Biljana, Vukomanović, Marija, Tomić, Simonida, "Biocompatible and degradable scaffolds based on 2-hydroxyethyl methacrylate, gelatin and poly(beta amino ester) crosslinkers" in Polymer Testing, 68 (2018):270-278,
https://doi.org/10.1016/j.polymertesting.2018.04.024 . .

TY  - JOUR
AU  - Jovicević, Niko
AU  - Cvetković, Vesna S.
AU  - Kamberović, Željko
AU  - Jovicević, Jovan N.
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2520
AB  - Aluminum was incorporated into a polycrystalline cadmium electrode surface by underpotential deposition from equimolar AlCl3+ NaCl melt at 473 K, 523 K, and 573 K (200 A degrees C, 250 A degrees C, and 300 A degrees C). The process was studied by linear sweep voltammetry and potentiostatic deposition/galvanostatic striping. The deposits were characterized X-ray diffraction (XRD), Auger electron spectroscopy (AES), and electron probe microanalyzer (EPMA). The electrochemical measurements showed evidence of Cd-Al alloys being formed but they could not be identified. The growth kinetics of the Cd-Al layers of various proportion and depths that depended on temperature and deposition time were described.
PB  - Springer, New York
T2  - Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science
T1  - Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate
EP  - 114
IS  - 1
SP  - 106
VL  - 44
DO  - 10.1007/s11663-012-9750-3
ER  - 

@article{
author = "Jovicević, Niko and Cvetković, Vesna S. and Kamberović, Željko and Jovicević, Jovan N.",
year = "2013",
abstract = "Aluminum was incorporated into a polycrystalline cadmium electrode surface by underpotential deposition from equimolar AlCl3+ NaCl melt at 473 K, 523 K, and 573 K (200 A degrees C, 250 A degrees C, and 300 A degrees C). The process was studied by linear sweep voltammetry and potentiostatic deposition/galvanostatic striping. The deposits were characterized X-ray diffraction (XRD), Auger electron spectroscopy (AES), and electron probe microanalyzer (EPMA). The electrochemical measurements showed evidence of Cd-Al alloys being formed but they could not be identified. The growth kinetics of the Cd-Al layers of various proportion and depths that depended on temperature and deposition time were described.",
publisher = "Springer, New York",
journal = "Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science",
title = "Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate",
pages = "114-106",
number = "1",
volume = "44",
doi = "10.1007/s11663-012-9750-3"
}

Jovicević, N., Cvetković, V. S., Kamberović, Ž.,& Jovicević, J. N.. (2013). Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate. in Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science
Springer, New York., 44(1), 106-114.
https://doi.org/10.1007/s11663-012-9750-3

Jovicević N, Cvetković VS, Kamberović Ž, Jovicević JN. Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate. in Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 2013;44(1):106-114.
doi:10.1007/s11663-012-9750-3 .

Jovicević, Niko, Cvetković, Vesna S., Kamberović, Željko, Jovicević, Jovan N., "Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate" in Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 44, no. 1 (2013):106-114,
https://doi.org/10.1007/s11663-012-9750-3 . .