TY  - CONF
AU  - Majstorović, Jelena
AU  - Volkov-Husović, Tatjana
AU  - Savković, Snežana
AU  - Ranković, Dragana
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7505
AB  - Today ultrasound application is part of program that is being applied in laboratories for determining dynamic parameters (Vp, Vs) and enables investigation of these parameters relations on rocks, marbles, schist, limestone and fireproof materials. It is emphasized that the results may obviously point to anisotropy, heterogeneity and an influence of thermal-shock on thermo-stability of fireproof materials.
PB  - Bor : Technical Faculty
C3  - Proceedings / 45th International October Conference on Mining and Metallurgy - IOC 2013, 16-19 October 2013, Bor, Serbia
T1  - APPLAYING ULTRASOUND LABORATORY RESEARCH IN MINING, CIVIL ENGINEERING AND METALLURY
EP  - 255
SP  - 252
ER  - 

@conference{
author = "Majstorović, Jelena and Volkov-Husović, Tatjana and Savković, Snežana and Ranković, Dragana",
year = "2013",
abstract = "Today ultrasound application is part of program that is being applied in laboratories for determining dynamic parameters (Vp, Vs) and enables investigation of these parameters relations on rocks, marbles, schist, limestone and fireproof materials. It is emphasized that the results may obviously point to anisotropy, heterogeneity and an influence of thermal-shock on thermo-stability of fireproof materials.",
publisher = "Bor : Technical Faculty",
journal = "Proceedings / 45th International October Conference on Mining and Metallurgy - IOC 2013, 16-19 October 2013, Bor, Serbia",
title = "APPLAYING ULTRASOUND LABORATORY RESEARCH IN MINING, CIVIL ENGINEERING AND METALLURY",
pages = "255-252"
}

Majstorović, J., Volkov-Husović, T., Savković, S.,& Ranković, D.. (2013). APPLAYING ULTRASOUND LABORATORY RESEARCH IN MINING, CIVIL ENGINEERING AND METALLURY. in Proceedings / 45th International October Conference on Mining and Metallurgy - IOC 2013, 16-19 October 2013, Bor, Serbia
Bor : Technical Faculty., 252-255.

Majstorović J, Volkov-Husović T, Savković S, Ranković D. APPLAYING ULTRASOUND LABORATORY RESEARCH IN MINING, CIVIL ENGINEERING AND METALLURY. in Proceedings / 45th International October Conference on Mining and Metallurgy - IOC 2013, 16-19 October 2013, Bor, Serbia. 2013;:252-255..

Majstorović, Jelena, Volkov-Husović, Tatjana, Savković, Snežana, Ranković, Dragana, "APPLAYING ULTRASOUND LABORATORY RESEARCH IN MINING, CIVIL ENGINEERING AND METALLURY" in Proceedings / 45th International October Conference on Mining and Metallurgy - IOC 2013, 16-19 October 2013, Bor, Serbia (2013):252-255.

TY  - JOUR
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Majstorović, Jelena
AU  - Matović, Branko
AU  - Volkov-Husović, Tatjana
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2043
AB  - Alumina based low cement castable (LCC) was synthesized and then treated from room temperature to 1600°C. Ultrasonic measurements were applied with the aim to obtain results of longitudinal and transversal ultrasonic velocities as well as Young's modulus of elasticity. Changes in microstructure of the samples treated at different temperatures were observed by SEM and image analyses. Correlation among mechanical, physical, and elastic properties and microstructure were also discussed. Results show that heating temperature, microstructure, and porosity have strong influence on cold crushing, flexural, and tensile strength as well as on Young's modulus of elasticity.
PB  - Association of Metallurgical Engineers of Serbia
T2  - Metallurgical & Materials Engineering
T1  - Thermal and mechanical properties of high alumina low cement castable
EP  - 65
IS  - 1
SP  - 53
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2043
ER  - 

@article{
author = "Martinović, Sanja and Vlahović, Milica and Majstorović, Jelena and Matović, Branko and Volkov-Husović, Tatjana",
year = "2012",
abstract = "Alumina based low cement castable (LCC) was synthesized and then treated from room temperature to 1600°C. Ultrasonic measurements were applied with the aim to obtain results of longitudinal and transversal ultrasonic velocities as well as Young's modulus of elasticity. Changes in microstructure of the samples treated at different temperatures were observed by SEM and image analyses. Correlation among mechanical, physical, and elastic properties and microstructure were also discussed. Results show that heating temperature, microstructure, and porosity have strong influence on cold crushing, flexural, and tensile strength as well as on Young's modulus of elasticity.",
publisher = "Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical & Materials Engineering",
title = "Thermal and mechanical properties of high alumina low cement castable",
pages = "65-53",
number = "1",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2043"
}

Martinović, S., Vlahović, M., Majstorović, J., Matović, B.,& Volkov-Husović, T.. (2012). Thermal and mechanical properties of high alumina low cement castable. in Metallurgical & Materials Engineering
Association of Metallurgical Engineers of Serbia., 18(1), 53-65.
https://hdl.handle.net/21.15107/rcub_technorep_2043

Martinović S, Vlahović M, Majstorović J, Matović B, Volkov-Husović T. Thermal and mechanical properties of high alumina low cement castable. in Metallurgical & Materials Engineering. 2012;18(1):53-65.
https://hdl.handle.net/21.15107/rcub_technorep_2043 .

Martinović, Sanja, Vlahović, Milica, Majstorović, Jelena, Matović, Branko, Volkov-Husović, Tatjana, "Thermal and mechanical properties of high alumina low cement castable" in Metallurgical & Materials Engineering, 18, no. 1 (2012):53-65,
https://hdl.handle.net/21.15107/rcub_technorep_2043 .