TY  - JOUR
AU  - Soldatović, Danijela
AU  - Vuksanović, Jelena
AU  - Radović, Ivona
AU  - Višak, Zoran P.
AU  - Kijevčanin, Mirjana
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3736
AB  - In this study, densities and viscosities of four binary systems {aniline/N,N-dimethylaniline + 1-butyl-3-methylimidazolium triflate ([bmim][OTf])} and {aniline/N,N-dimethylaniline + 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][NTf2])} were measured at atmospheric pressure and within the temperature range T = (288.15 to 333.15) K. Excess molar volumes V-E, viscosity deviations Delta eta and excess molar Gibbs energies of activation of viscous flow Delta G*(E) were calculated and the results were fitted to a Redlich-Kister polynomial equation. Also, enthalpic and entropic parts of the Delta G*(E) function were determined, at the same composition, for three studied systems that exhibit complete miscibility, since {aniline + [bmim][OTf]} is a partially miscible system. Considering the calculated thermodynamic properties, molecular interactions in the investigated binary systems were analysed and are discussed.
PB  - Academic Press Ltd- Elsevier Science Ltd, London
T2  - Journal of Chemical Thermodynamics
T1  - Excess molar volumes and viscosity behaviour of binary mixtures of aniline/or N,N-dimethylaniline with imidazolium ionic liquids having triflate or bistriflamide anion
EP  - 154
SP  - 137
VL  - 109
DO  - 10.1016/j.jct.2017.02.007
ER  - 

@article{
author = "Soldatović, Danijela and Vuksanović, Jelena and Radović, Ivona and Višak, Zoran P. and Kijevčanin, Mirjana",
year = "2017",
abstract = "In this study, densities and viscosities of four binary systems {aniline/N,N-dimethylaniline + 1-butyl-3-methylimidazolium triflate ([bmim][OTf])} and {aniline/N,N-dimethylaniline + 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][NTf2])} were measured at atmospheric pressure and within the temperature range T = (288.15 to 333.15) K. Excess molar volumes V-E, viscosity deviations Delta eta and excess molar Gibbs energies of activation of viscous flow Delta G*(E) were calculated and the results were fitted to a Redlich-Kister polynomial equation. Also, enthalpic and entropic parts of the Delta G*(E) function were determined, at the same composition, for three studied systems that exhibit complete miscibility, since {aniline + [bmim][OTf]} is a partially miscible system. Considering the calculated thermodynamic properties, molecular interactions in the investigated binary systems were analysed and are discussed.",
publisher = "Academic Press Ltd- Elsevier Science Ltd, London",
journal = "Journal of Chemical Thermodynamics",
title = "Excess molar volumes and viscosity behaviour of binary mixtures of aniline/or N,N-dimethylaniline with imidazolium ionic liquids having triflate or bistriflamide anion",
pages = "154-137",
volume = "109",
doi = "10.1016/j.jct.2017.02.007"
}

Soldatović, D., Vuksanović, J., Radović, I., Višak, Z. P.,& Kijevčanin, M.. (2017). Excess molar volumes and viscosity behaviour of binary mixtures of aniline/or N,N-dimethylaniline with imidazolium ionic liquids having triflate or bistriflamide anion. in Journal of Chemical Thermodynamics
Academic Press Ltd- Elsevier Science Ltd, London., 109, 137-154.
https://doi.org/10.1016/j.jct.2017.02.007

Soldatović D, Vuksanović J, Radović I, Višak ZP, Kijevčanin M. Excess molar volumes and viscosity behaviour of binary mixtures of aniline/or N,N-dimethylaniline with imidazolium ionic liquids having triflate or bistriflamide anion. in Journal of Chemical Thermodynamics. 2017;109:137-154.
doi:10.1016/j.jct.2017.02.007 .

Soldatović, Danijela, Vuksanović, Jelena, Radović, Ivona, Višak, Zoran P., Kijevčanin, Mirjana, "Excess molar volumes and viscosity behaviour of binary mixtures of aniline/or N,N-dimethylaniline with imidazolium ionic liquids having triflate or bistriflamide anion" in Journal of Chemical Thermodynamics, 109 (2017):137-154,
https://doi.org/10.1016/j.jct.2017.02.007 . .

TY  - JOUR
AU  - Zlatković, Nikola R.
AU  - Majstorović, Divna
AU  - Kijevčanin, Mirjana
AU  - Živković, Emila
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3617
AB  - Plate heat exchanger is a type of heat exchanger that uses corrugated metal plates to transfer heat between two fluids. The plate corrugations are designed to achieve turbulence across the entire heat transfer area thus producing the highest possible heat transfer coefficients while allowing close temperature approaches. Subsequently, this leads to a smaller heat transfer area, smaller units and in some cases, fewer heat exchangers. In this work, an application for thermal and hydraulic computations of plate heat exchangers had been developed using Sharp Develop, an open source programming platform. During the development process, several literature methods and correlations for calculation of heat transfer coefficient and pressure drop in a plate heat exchanger have been tested and the selected four methods: Martin, VDI, Kumar and Coulson and Richardson have been incorporated into the software. The structure of the software is visually presented through several windows: a window for inserting input data, windows for showing the results of computation by each of the methods, a window for showing comparative analysis of the most important computation results obtained by all of the used methods and a help window for demonstrating the working principle of plate heat exchanger.
PB  - Savez hemijskih inženjera, Beograd
T2  - Hemijska industrija
T1  - Plate heat exchanger design software for industrial and educational applications
EP  - 449
IS  - 5
SP  - 439
VL  - 71
DO  - 10.2298/HEMIND161021007Z
ER  - 

@article{
author = "Zlatković, Nikola R. and Majstorović, Divna and Kijevčanin, Mirjana and Živković, Emila",
year = "2017",
abstract = "Plate heat exchanger is a type of heat exchanger that uses corrugated metal plates to transfer heat between two fluids. The plate corrugations are designed to achieve turbulence across the entire heat transfer area thus producing the highest possible heat transfer coefficients while allowing close temperature approaches. Subsequently, this leads to a smaller heat transfer area, smaller units and in some cases, fewer heat exchangers. In this work, an application for thermal and hydraulic computations of plate heat exchangers had been developed using Sharp Develop, an open source programming platform. During the development process, several literature methods and correlations for calculation of heat transfer coefficient and pressure drop in a plate heat exchanger have been tested and the selected four methods: Martin, VDI, Kumar and Coulson and Richardson have been incorporated into the software. The structure of the software is visually presented through several windows: a window for inserting input data, windows for showing the results of computation by each of the methods, a window for showing comparative analysis of the most important computation results obtained by all of the used methods and a help window for demonstrating the working principle of plate heat exchanger.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Hemijska industrija",
title = "Plate heat exchanger design software for industrial and educational applications",
pages = "449-439",
number = "5",
volume = "71",
doi = "10.2298/HEMIND161021007Z"
}

Zlatković, N. R., Majstorović, D., Kijevčanin, M.,& Živković, E.. (2017). Plate heat exchanger design software for industrial and educational applications. in Hemijska industrija
Savez hemijskih inženjera, Beograd., 71(5), 439-449.
https://doi.org/10.2298/HEMIND161021007Z

Zlatković NR, Majstorović D, Kijevčanin M, Živković E. Plate heat exchanger design software for industrial and educational applications. in Hemijska industrija. 2017;71(5):439-449.
doi:10.2298/HEMIND161021007Z .

Zlatković, Nikola R., Majstorović, Divna, Kijevčanin, Mirjana, Živković, Emila, "Plate heat exchanger design software for industrial and educational applications" in Hemijska industrija, 71, no. 5 (2017):439-449,
https://doi.org/10.2298/HEMIND161021007Z . .

TY  - JOUR
AU  - Ivanović, Aleksandra
AU  - Trumić, Biserka
AU  - Ivanov, Svetlana Lj
AU  - Marjanović, Sasa R.
AU  - Zrilić, Milorad
AU  - Volkov-Husović, Tatjana
AU  - Petković, Branka B.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3441
AB  - In this paper, changes in the mechanical properties of Pd-5Ni alloy are analysed after recrystallisation annealing in order to determine the optimal conditions for a thermomechanical processing regime for this alloy. The temperature and annealing time were varied and the resulting changes in hardness, tensile strength, relative elongation and proof strength were monitored. By using the simplex-lattice method and analysing experimental data, a fourth degree mathematical model-regression polynomial was defined and isolines of changes in the mechanical properties of the investigated alloys were designed depending on the conditions of heat treatment after rolling.
PB  - Johnson Matthey Publ Ltd Co, Royston
T2  - Johnson Matthey Technology Review
T1  - Optimisation of the Recrystallisation Annealing Regime of Pd-5Ni Alloy Using experimental design and statistical analysis to understand the metallurgical properties of palladium alloy for ammonia oxidation catchment gauze applications
EP  - 38
IS  - 1
SP  - 31
VL  - 60
DO  - 10.1595/205651315X689964
ER  - 

@article{
author = "Ivanović, Aleksandra and Trumić, Biserka and Ivanov, Svetlana Lj and Marjanović, Sasa R. and Zrilić, Milorad and Volkov-Husović, Tatjana and Petković, Branka B.",
year = "2016",
abstract = "In this paper, changes in the mechanical properties of Pd-5Ni alloy are analysed after recrystallisation annealing in order to determine the optimal conditions for a thermomechanical processing regime for this alloy. The temperature and annealing time were varied and the resulting changes in hardness, tensile strength, relative elongation and proof strength were monitored. By using the simplex-lattice method and analysing experimental data, a fourth degree mathematical model-regression polynomial was defined and isolines of changes in the mechanical properties of the investigated alloys were designed depending on the conditions of heat treatment after rolling.",
publisher = "Johnson Matthey Publ Ltd Co, Royston",
journal = "Johnson Matthey Technology Review",
title = "Optimisation of the Recrystallisation Annealing Regime of Pd-5Ni Alloy Using experimental design and statistical analysis to understand the metallurgical properties of palladium alloy for ammonia oxidation catchment gauze applications",
pages = "38-31",
number = "1",
volume = "60",
doi = "10.1595/205651315X689964"
}

Ivanović, A., Trumić, B., Ivanov, S. L., Marjanović, S. R., Zrilić, M., Volkov-Husović, T.,& Petković, B. B.. (2016). Optimisation of the Recrystallisation Annealing Regime of Pd-5Ni Alloy Using experimental design and statistical analysis to understand the metallurgical properties of palladium alloy for ammonia oxidation catchment gauze applications. in Johnson Matthey Technology Review
Johnson Matthey Publ Ltd Co, Royston., 60(1), 31-38.
https://doi.org/10.1595/205651315X689964

Ivanović A, Trumić B, Ivanov SL, Marjanović SR, Zrilić M, Volkov-Husović T, Petković BB. Optimisation of the Recrystallisation Annealing Regime of Pd-5Ni Alloy Using experimental design and statistical analysis to understand the metallurgical properties of palladium alloy for ammonia oxidation catchment gauze applications. in Johnson Matthey Technology Review. 2016;60(1):31-38.
doi:10.1595/205651315X689964 .

Ivanović, Aleksandra, Trumić, Biserka, Ivanov, Svetlana Lj, Marjanović, Sasa R., Zrilić, Milorad, Volkov-Husović, Tatjana, Petković, Branka B., "Optimisation of the Recrystallisation Annealing Regime of Pd-5Ni Alloy Using experimental design and statistical analysis to understand the metallurgical properties of palladium alloy for ammonia oxidation catchment gauze applications" in Johnson Matthey Technology Review, 60, no. 1 (2016):31-38,
https://doi.org/10.1595/205651315X689964 . .