Search
Now showing items 21-30 of 1054
Frequency response of an adsorber with modulation of the inlet molar flow-rate - I. A semi-batch adsorber
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
A new method of frequency response analysis of an adsorber, with modulation of the adsorbate molar supply instead of traditional modulation of the reservoir volume, is presented. A semi-batch mode of operation is considered, ...
Frequency response of an adsorber with modulation of the inlet molar flow-rate - II. A continuous flow adsorber
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
A new method of frequency response analysis of an adsorber, with modulation of the adsorbate molar supply instead of traditional modulation of the reservoir volume, is presented. A continuous mode of operation is considered, ...
Predictive modeling of the mechanical properties of particulate hydroxyapatite reinforced polymer composites
(Wiley, Hoboken, 2002)
The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly-L-lactide and collagen) matrix composite was investigated through finite-element ...
Multifunctional PES fabrics modified with colloidal Ag and TiO2 nanoparticles
(Wiley, Hoboken, 2011)
This study is aimed to highlight the possibility of engineering the multifunctional textile nanocomposite material based on the polyester (PES) fabric modified with colloidal Ag and TiO2 nanoparticles (NPs). The effects ...
Experimental investigation and thermodynamic prediction of the Au-Cu-Sb phase diagram
(Elsevier Science Sa, Lausanne, 2011)
Phase diagram of the ternary Au-Cu-Sb system was investigated experimentally by DTA and SEM-EDS methods and analytically by CALPHAD method. The liquids projection, invariant equilibrium, several vertical sections and ...
Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
(MDPI, 2023)
Titanium alloys have been present for decades as the main components for the production of various orthopedic and dental elements. However, modern times require titanium alloys with a low Young’s modulus, and without the ...
Synthesis of mullite nanostructured spherical powder by ultrasonic spray pyrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
In this paper the synthesis of nanostructured spherical particles of mullite powders by ultrasonic spray pyrolysis is presented. The mullite crystallization and the nanostructure development during heating were examined ...
Vermiculite enriched by Fe(III) oxides as a novel adsorbent for toxic metals removal
(Journal of Environmental Chemical Engineering, 2021)
Expanded vermiculite (EV) was modified by deposition of different spinel ferrite composites on the outer surface of EV 2:1 layers in order to improve its adsorptive properties. Modifications were made by deposition of: ...
Antibacterial effect of silver nanoparticles deposited on corona-treated polyester and polyamide fabrics
(Wiley, Hoboken, 2008)
The possibility of using a corona treatment (electrical discharge at atmospheric pressure) for fiber surface activation, which can facilitate the loading of silver nanoparticles (NPs) from colloids onto the polyester (PES) ...
Bioreactor studies of native and tissue engineered cartilage
(IOS Press, Amsterdam, 2002)
Functional tissue engineering of cartilage involves the use of bioreactors designed to provide a controlled in vitro environment that embodies some of the biochemical and physical signals known to regulate chondrogenesis. ...