Претраживање
Приказ резултата 11-20 од 292
The thermal degradation of poly(di-n-hexyl itaconate) prepared in the presence of n-dodecyl mercaptan
(Elsevier Sci Ltd, Oxford, 1993)
The preparation of poly(di-n-hexyl itaconate) (PDHI) in the presence of the chain transfer agent n-dodecyl mercaptan resulted in polymers of increased thermal stability, owing to the suppression of the number of chain ...
The non-oxidative thermal degradation of poly (Di-2-chloroethyl itaconate)
(John Wiley & Sons Ltd, W Sussex, 1993)
The non-oxidative thermal degradation of poly (di-2-chloroethyl itaconate) (PD2CEI) was studied by TG and by analysing the thermal products. The major processes occurring during thermal analysis are crosslinking, ...
Electron‐impact induced decomposition of some 3‐alkyl‐5‐substituted‐6‐methyl uracils
(Wiley, Hoboken, 1995)
Mass spectrometry was used to study the main fragmentation routes of some 3‐alkyl‐5‐substituted‐6‐methyl uracils. Differences in fragmentation were caused by changes in the structure of the alkyl group in position 3 of the ...
Corrosion behaviour of polyester and fluoropolymer coatings on coil coated stainless steel
(Serbian Chemical Society, Belgrade, 1996)
Coil coated stainless steel is a new material for applications in civil and industrial fields with the purpose of reducing maintenance costs and increasing the service life of the products. The corrosion behaviour of ...
The interfacial stability of magnetically stabilized fluidized beds
(Serbian Chemical Society, Belgrade, 1996)
The study concerns a phenomenon in which the magnetization of ferromagnetic particles stabilizes the state of uniform fluidization in gas-solid, liquid-solid and gas-liquid-solid fluidized beds. Fluidization regimes and ...
Effect of test variables on apparent activation energy for hot working and critical recrystallization temperatures of V-microalloyed steel
(Verlag Stahleisen Mbh, Dusseldorf, 1997)
The effect of test variables on the apparent activation energy for hot working of a medium carbon V-microalloyed steel, Q(HW), and the critical recrystallization temperature, T-nr, have been studied by means of isothermal ...
Electrooxidation of H-2, CO and H-2/CO mixtures on a well-characterized Pt-Re bulk alloy electrode and comparison with other Pt binary alloys
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
We report new results for the electrooxidation of Hz, CO and H-2/CO mixtures on a Pt75Re25 bulk alloy using surface preparation in a UHV chamber and characterization by X-ray photoelectron spectroscopy (XPS). Sputter-cleaned ...
Leaching kinetics of lead from lead (II) sulphate in aqueous calcium chloride and magnesium chloride solutions
(Elsevier Science Bv, Amsterdam, 1997)
The kinetics of lead leaching from lead (II) sulphate in aqueous calcium chloride and magnesium chloride solutions was studied. The leaching rates of lead were measured by using an agitated vessel at atmospheric pressure, ...
Thermal shock of ceramic material : Comparison of resistance parameter with the critical ΔT values ΔTc = ΔTc(Bi) of ceramic materials
(Trans Tech Publications Ltd., 1997)
Thermal shock resistance of ceramic material can be characterized by using resistance parameters or critical temperature difference. Correlation between fracture resistance parameter, R and critical temperature difference, ...
The acid resistance and corrosion stability of polyester coatings on phosphatized steel
(Serbian Chemical Society, Belgrade, 1998)
Protective polyester coatings on phosphatized steel were obtained with different combinations of diols (2-butyl-2-ethyl-1,3-propanediol or 2,2-dimethyl-1,3-propanediol), organic acids (1,3-cyclohexanedicarboxylic acid, ...