Претраживање
Приказ резултата 11-20 од 56
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue
(Croatian Metallurgical Soc, Zagreb, 2014)
High strength low-alloy steel under low cycle fatigue at a certain level of strain controlled achieve stabilized condition. During the fatigue loading stabilized hysteresis loop is determined, which typical cycle of ...
Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties
(University of Novi Sad, Faculty of Technology, 2018)
Green hydroxyapatite ceramics were obtained by cold uniaxial and isostatic pressing of hydrothermally synthesized powders, pure hydroxyapatite and hydroxyapatite doped with Ag+, Cu2+ and Zn2+ ions. The ceramics were ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines
(Elsevier Science Bv, Amsterdam, 2018)
Steel grade 14MoV6-3 is a low-carbon microalloyed steel with addition of chromium and molybdenum. This grade is designed mainly for power industry applications, withstanding operating at elevated temperatures.In this paper, ...
Synthesis and characterisation of hybrid polymer composite materials based on wood. / Sinteza i karakterizacija hibridnih polimernih kompozita na bazi drveta
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2019)
The focus of this doctoral dissertation is the preparation and characterization of wood-plastic composites (WPC), whereby a new method of obtaining hybrid polymer composites based on wood from solution and forming the final ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
PVB/sepiolite nanocomposites as reinforcement agents for paper
(Srpsko hemijsko društvo, Beograd, 2016)
In order to improve the mechanical properties of paper, 1, 3 and 5 wt. % of sepiolite were dispersed in a poly(vinyl butyral) (PVB) matrix and coated onto the surface of schrenz (110 g m(-2)). Deagglomerated sepiolite ...
The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite ...
Investigation of the influence of processing parameters on the properties of bioceramic materials based on calcium hydroxyapatite and calcium phosphate obtained by different sintering technique / Ispitivanje uticaja parametara procesiranja na svojstva biokeramičkih materijala na bazi kalcijum-hidroksiapatita i kalcijum-fosfata dobijenih različitim tehnikama sinterovanja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Calcium phosphate bioceramics materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP), due to their chemical composition, excellent biocompatibility, bioactivity and osteoconduction have received considerable ...