Претраживање
Приказ резултата 41-50 од 3539
Surface characterization of keratin fibres treated by water vapour plasma
(Wiley, Hoboken, 2003)
The effect of water vapour plasma treatment on the shrinkage behaviour and chemical properties of the surface of keratin fibres was studied. The wettability and shrink resistance of wool were improved even at low plasma ...
Acceptability of Residual Stresses Measurement Methods of Butt Weldments and Repairs
(Strojarstvo, 2009)
The joints made by fusion of materials are exposed to the influence of residual stresses induced by welding thermal cycles. Residual stresses were measured on butt welded plates made of NIOMOL 490K, before and after ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Material properties and thermal shock behavior of alumina based refractories
(Belgian Ceramic Soc, Mons, 2001)
Materials were five alumina based commercial refractories with different contents of ( Al2O3 + TiO2) from 28 % to 78 %. Thermal and mechanical properties of the chosen materials, were measured using standard laboratory ...
Tailoring of advanced poly(lactic acid)-based materials: A review
(Journal of Applied Polymer Science, 2022)
Poly(lactic acid) (PLA) stands out as the most promising biodegradable alternative to conventional petrochemical-based polymers for manufacturing of high-performance materials applied in medicine, pharmacy, food, textile, ...
Nonlinear frequency response of a chromatographic column. part I: Application to estimation of adsorption isotherms with inflection points
(Taylor & Francis Inc, Philadelphia, 2005)
A new method to determine adsorption isotherms is suggested. The method is based on analysis of the nonlinear frequency response of a chromatographic column. Due to the fact that higher order frequency response functions ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
On the deactivation mechanism of RuO2-TiO2/Ti anodes prepared by the sol-gel procedure
(Elsevier Science Sa, Lausanne, 2005)
The deactivation process that leads to the end of titanium supported RuO2-TiO2 coating service life, for anodes prepared from RuO2 and TiO2 sols, as well as by the conventional thermal decomposition of RuCl3 and TiCl3, was ...
Nanomechanical properties evaluation of bioactive glass coatings on titanium alloy substrate
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
Bioinert metallic implants such as titanium and titanium alloys could be coated with bioactive materials with good adhesion to metal and which could be also bonded to the bone. In order to predict the mechanical behavior ...
Synthesis of N-substituted 4,6-dimethyl-3-cyano-2-pyridones under microwave irradiation
(Taylor & Francis Inc, Philadelphia, 2006)
N-substituted 4,6-dimethyl-3-cyano-2-pyridones have been prepared from acetylacetone, N-substituted cyanoacetamide, and pyperidine as catalyst under microwave irradiation without solvent. The rapid and simple method produced ...