Претраживање
Приказ резултата 1-10 од 1042
Simple and cost-effective measures for the improvement of paper mill effluent treatment - A case study
(Journal of Cleaner Production, 2011)
In this study, the performance and the efficiency of physico-chemical effluent treatment in a paper mill was investigated, with the aim of evaluating the treatment rationality and running stability. The effluent treatment ...
Micromechanical model for fracture toughness prediction in Al-Zn-Mg-Cu alloy forgings
(Taylor & Francis Ltd, Abingdon, 2008)
An attempt has been made to model the plane-strain fracture toughness, KIc, in Al-Zn-Mg-Cu alloy forgings subjected to overageing. The proposed model, based on the multiple micromechanisms, reveals the quantitative relations ...
Human exposure to trace metals and possible public health risks via consumption of mussels Mytilus galloprovincialis from the Adriatic coastal area
(Elsevier Ltd., 2014)
Considering the growing concern due to different levels of anthropogenic loadings, the main purpose of this study was to identify the levels of trace metals (Fe, Mn, Cu, Zn, Co, Ni, Cd, Pb and Hg) in the mussels Mytilus ...
Densities, viscosities and refractive indices of binary mixtures containing methyl ethyl ketone. Friction theory. New UNIFAC-VISCO and ASOG-VISCO parameter determination
(Elsevier Science Bv, Amsterdam, 2016)
In this paper densities, viscosities and refractive indices of four binary mixtures containing methyl ethyl ketone, at atmospheric pressure and in the temperature range from 288.15 K to 333.15 K are reported. From experimental ...
Influence of the common varistor dopants (CoO, Cr2O3 and Nb2O5) on the structural properties of SnO2 ceramics
(Elsevier Science Inc, New York, 2004)
The influence of dopants commonly used in SnO2 varistor ceramics, such as CoO, Cr2O3 or Nb2O5, on the structural properties of SnO2 was investigated. Several SnO2-based ceramics containing only one of the dopants were ...
Degradation of the Insulating System of Power Transformers by Copper Sulfide Deposition: Influence of Oil Oxidation and Presence of Metal Passivator
(Amer Chemical Soc, Washington, 2010)
Deposition of conductive copper sulfide on paper insulation of power transformers was recognized as a serious risk that can result in equipment failure. The aim of this study was to investigate the influence of mineral ...
Modelling of plasma activated CVD of Co-C-O layers in parallel plate reactor
(Elsevier, 2006)
A modelling procedure for Co-C-O layers generated on steel C35 from cobalt(II) acetylacetonate by PACVD is suggested. The investigations were carried out in a parallel plate reactor, under a radio frequency (13.56 MHz) ...
Quality attributes of a fermented whey-based beverage enriched with milk and a probiotic strain
(Royal Society of Chemistry, 2014)
Beverages produced by fermentation of whey have significantly lower viscosity, milder flavour and less viability of probiotic microorganisms compared to those obtained by fermentation of milk. Therefore, it is necessary ...
Electrochemically deposited iridium-oxide: Estimation of intrinsic activity and stability in oxygen evolution in acid solution
(Journal of Electroanalytical Chemistry, 2021)
Hydrated iridiumoxyhydroxide (IrOx) films were electrochemically deposited from an alkaline oxalic solution at constant anodic potentials and by applying a potential cycling protocol, in both cases with variation of the ...
Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives
(Elsevier, 2002)
Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were ...