Претраживање
Приказ резултата 1-10 од 899
Nanomechanical properties evaluation of bioactive glass coatings on titanium alloy substrate
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
Bioinert metallic implants such as titanium and titanium alloys could be coated with bioactive materials with good adhesion to metal and which could be also bonded to the bone. In order to predict the mechanical behavior ...
Electrophoretic Deposition of Biocomposite Lignin/Hydroxyapatite Coatings on Titanium
(Walter de Gruyter Gmbh, Berlin, 2009)
In this work, electrophoretic deposition (EPD) was applied to obtain novel hydroxyapatite (HAP)/lignin (Lig) biocomposite coatings on titanium substrate. Nanosized hydroxyapatite powder, prepared by using the modified ...
Effect of low-temperature plasma and chitosan treatment on wool dyeing with acid red 27
(John Wiley & Sons Inc, Hoboken, 2005)
This study examines in detail the influence of low-temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink-resistance measurements. ...
A comparative study of the electrochemical properties of carbon nanotubes and carbon black
(Elsevier Science Sa, Lausanne, 2009)
Two samples of commercial multi-walled carbon nanotubes (Sigma-Aldrich and Sun Nanotech) and a sample of carbon black (Vulcan XC-72R) were investigated in raw state and after the activation in nitric and sulfuric acid by ...
Method for quantitative analysis of glycosaminoglycan distribution in cultured natural and engineered cartilage
(Amer Inst Physics, Woodbury, 1999)
Cartilage tissue engineering can provide a valuable tool for controlled studies of tissue development. As an example, analysis of the spatial distribution of glycosaminoglycans (GAG) in sections of cartilaginous tissues ...
Oxidation of carbon monoxide and formic acid on bulk and nanosized Pt-Co alloys
(Springer, New York, 2012)
Bulk Pt3Co and nanosized Pt3Co and PtCo alloys supported on high area carbon were investigated as the electrocatalysts for the COads and HCOOH oxidation. Pt3Co alloy with Co electrochemically leached from the surface (Pt ...
Structure and thermal behavior of the layered zincophosphate [NH3-CH2-CH(NH3)-CH3](ZnPO4)(2)
(Elsevier Science Sa, Lausanne, 2009)
A zinc phosphate with the composition [NH3-CH2-CH(NH3)-CH3](ZnPO4)(2), containing the doubly protonated 1,2-diaminopropane (abbr. HDAP), was synthesized by hydrothermal crystallization of zinc nitrate, phosphoric acid, ...
Recycled-wool-based nonwoven material as a sorbent for lead cations
(Wiley, Hoboken, 2003)
The aim of this study was to investigate the sorption properties of a recycled-wool-based nonwoven material for lead cations. To improve sorption properties, the material was treated with low-temperature air plasma and/or ...
Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys
(Japan Inst Metals, Sendai, 2009)
The as-cast matrix microstructure in 19 mass%Cr-2.8 mass%C white cast iron with up to 4.7 mass% V additions has been studied. Type and degree of the austenite transformation in the course of cooling after solidification ...
Recovery of (-)-epigallocatechingallate (EGCG) from aqueous solution by selective adsorption onto spent coffee grounds
(Springer, New York, 2015)
Activated carbons from spent coffee grounds have been prepared for column adsorption of main green tea polyphenol (-)-epigallocatechingallate (EGCG). The response surface methodology was used to estimate the influence of ...