Претраживање
Приказ резултата 1-10 од 23
The nano-wetting aspect at the liquid-metal/sic interface
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
The wetting process on the nano-scale, as an initial and essential step in liquid metal/ceramic joining, is discussed here. Thanks to recent breakthroughs in experimental techniques with nanometre resolution, questions ...
Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an aa5083-type alloy
(Institute of Metals and Technology, 2014)
Exfoliation and pitting corrosion were tested on an AA5083-type alloy sheet, after applying different thermo-mechanical treatments. Hot-rolled plates were laboratory cold rolled with 16-54 % reductions, and subsequently ...
Influence of cold-rolling deformation and annealing temperature on the grain growth of al-4%mg-mn alloy
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2020)
The propensity of an alloy toward an abnormal grain growth (AGG) severely limits the annealing temperature range, capability for hot forming, and deteriorates mechanical properties. In this work, the results of a study of ...
Homogenization of an al-mg alloy and alligatoring failure: alloy ductility and fracture
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
High-strength Al-Mg alloys have a propensity toward hot fracture and failure by alligatoring during hot rolling. In this study the effect of homogenization conditions on the susceptibility of an Al-5.1Mg-0.7Mn alloy toward ...
Wear resistance and dynamic fracture toughness of hypoeutectic high-chromium white cast iron alloyed with niobium and vanadium
(Institute of Metals and Technology, 2014)
The influence of mass fractions 1.5 % Nb and 1.5 % V, added singly and in combination, on the microstructural characteristics and properties relevant to the service performance of the hypoeutectic high-chromium white iron ...
Liquid metal/ceramic interfaces in dental practice and jewellery manufacturing
(Institute of Metals and Technology, 2010)
Metal-ceramic fusing has been the essential step in obtaining materials that benefit from both ceramic and metal constituents. i e where the combined properties of metal and ceramic layers are desirable When considering ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
Mechanical and structural characteristics of atmospheric plasma-sprayed multifunctional tio2 coatings
(Materiali in Tehnologije, 2020)
Titanium dioxide (TiO2) is a multifunctional oxide that is an interesting material for many technological applications. This paper presents the mechanical properties and microstructure of TiO2 coatings resistant to dry ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Nanofoils for soldering and brazing in dental joining practice and jewellery manufacturing
(Institute of Metals and Technology, 2010)
This paper describes the development of novel, reactive Al-Au nano-multilayered foils, their possible application in different fields and a discussion of the nano-foils' suitability for dental and jewellery applications. ...