Search
Now showing items 1-10 of 39
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Thermoplastic Copolyester Elastomers
(Handbook of Engineering and Speciality Thermoplastics: Polyethers and Polyesters, 2011)
In this chapter the preparation, structure and properties of thermoplastic copolyester elastomers, TPEE, are presented. TPEEs are multiblock copolymers built up from so-called short crystallizable hard segments and long ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Optimization of Al2O3 particle modification and UHMWPE fiber oxidation of EVA based hybrid composites: Compatibility, morphological and mechanical properties
(Elsevier Sci Ltd, Oxford, 2018)
Ultra-high molecular weight polyethylene (UHMWPE, PE)/oxidized PE (ox-PE) fibers and alumina reinforcement were used in preparation of poly (ethylene-co-vinyl acetate) (EVA)/hydrolyzed EVA (EVAOH) based composites. Different ...
Composite materials from fully bio-based thermosetting resins and recycled waste poly(ethylene terephthalate)
(Elsevier Sci Ltd, Oxford, 2018)
During the last two decades, interest in bio-based polymers, especially in bio-based composite materials, has grown as a result of environmental concerns. In this paper new composites obtained from fully bio-based unsaturated ...
Aramid hybrid composite laminates reinforced with inorganic fullerene-like tungsten disulfide nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
Combination of phenolic resin with poly (vinyl butyral), PVB, is often used as impregnation of aramid fabrics in prepregs for the ballistic protection products. In this study an effect of inorganic fullerene-like tungsten ...
Optimized preparation of alumina based fillers for tuning composite properties
(Elsevier Sci Ltd, Oxford, 2018)
Alumina based particles were prepared from aluminium chloride hydroxide as starting material by sol-gel technique. One series of particles was doped with ferrous oxide. Both series of particles were calcinated at three ...
Sr,Mg co-doping of calcium hydroxyapatite: Hydrothermal synthesis, processing, characterization and possible application as dentin substitutes
(Ceramics International, 2022)
The aim of this study was to investigate the influence of binary Sr, Mg ion-doping compared to the single-ion doping effects on the phase composition and morphology of hydrothermally obtained calcium hydroxyapatite (HAP) ...
Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane)
(Progress in Organic Coatings, 2021)
A series of novel waterborne polyurethanes (WBPUs) was synthesized using alpha,omega-dihydroxypropyl poly(dimethylsiloxane) (PDMS), isophorone diisocyanate (IPDI), 2,2-bis-(hydroxymethyl) propionic acid (DMPA) and triethylamine ...