Pretraživanje
Prikaz rezultata 1-10 od 2709
Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods
(Elsevier Sci Ltd, Oxford, 2016)
BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. ...
Characterization of glycidyl methacrylate based magnetic nanocomposites
(Savez hemijskih inženjera, Beograd, 2019)
Magnetic and non-magnetic macroporous crosslinked copolymers of glycidyl methacrylate and trimethylolpropane trimethacrylate were prepared by suspension copolymerization and functionalized with diethylenetriamine. The ...
Physical Properties of Sintered Alumina Doped with Different Oxides
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Corundum (alpha-alumina) is a suiTab. material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition ...
Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards
(MDPI, Basel, 2018)
This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Adsorption of arsenate on iron(III) oxide coated ethylenediamine functionalized multiwall carbon nanotubes
(Elsevier Science Sa, Lausanne, 2012)
New criteria in assessing the quality of drinking water reduced the maximum permissible concentration of arsenic from 50 mu g L-1 to 10 mu g L-1 and set a requirement for the development of new technologies for arsenic ...
Resveratrol loaded liposomes produced by different techniques
(Elsevier Sci Ltd, Oxford, 2013)
Several different methods for production of liposomes incorporating resveratrol were investigated and compared from the aspect of size distribution, surface charge, entrapment efficiency, phase behavior and stability. Thin ...
Seam pipes for process industry - Fracture analysis by using ring-shaped specimens
(Savez hemijskih inženjera, Beograd, 2018)
Pipelines are commonly used in process industry for transport of fluids, as well as granular solids, due to their numerous advantages in comparison to other transportation means. Pipe integrity is essential for a reliable ...
Experimental and theoretical consideration of the factors influencing cationic pollutants retention by seashell waste
(Wiley, Hoboken, 2018)
BACKGROUNDSeashell waste (SW) is rich in biogenic calcium carbonate and potentially can substitute geological sources in various applications, such as the separation of heavy metals and radionuclides from contaminated ...
Unsupervised classification and multi-criteria decision analysis as chemometric tools for the assessment of sediment quality: A case study of the Danube and Sava River
(Elsevier, Amsterdam, 2016)
The aim of this study was to evaluate the quality of freshwater sediments by means of three chemometric techniques for multi-criteria analysis and decision: self-organizing network (SON), self-organizing map (SOM) and ...