Search
Now showing items 1-10 of 3362
Hemp-based adsorbents for sequestration of metals: a review
(Springer Heidelberg, Heidelberg, 2019)
With the increasing focus on renewable materials and sustainability issues, the development of non-conventional materials from natural resources and possessing complexing properties is currently an area of extensive research ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
Effects of process and design parameters on heat management in fixed bed Fischer-Tropsch synthesis reactor
(Korean Institute Chemical Engineers, Seoul, 2018)
A two-dimensional pseudo-homogeneous model of wall-cooled fixed bed Fischer-Tropsch synthesis (FTS) reactor with Co/Re/gamma-Al2O3 catalyst was developed to study the effect of process and design parameters on heat generation ...
Multifunctional ternary composite films based on PLA and Ag/alginate microbeads: Physical characterization and silver release kinetics
(Elsevier Science Bv, Amsterdam, 2019)
Novel multifunctional composite poly(lactic acid) (PLA) films with alginate microbeads containing silver nanoparticles (AgNPs) were developed for potential antimicrobial food packaging applications. AgNPs, 10-20 nm in size, ...
Karakterizacija komercijalnih hiperrazgranatih poliestara / Characterization of the commercial hyperbranched polyesters
(Association of Chemical Engineers of Serbia, 2010)
U ovom radu prikazani su rezultati ispitivanja tri uzorka Boltorn® hidroksi-funkcionalnih hiperrazgranatih alifatskih poliestara druge, treće i četvrte pseudo generacije, kao i frakcija uzoraka treće i četvrte pseudo ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNaH(2)PO(4)+(1-y)KH2PO4}(aq) System at T=298.15K
(Springer/Plenum Publishers, New York, 2019)
Isopiestic measurements have been made for aqueous mixtures of NaH2PO4 and KH2PO4 at T=(298.15 +/- 0.01) K, at NaH2PO4 ionic strength fractions y=(0, 0.19108, 0.38306, 0.58192, and 1), assuming that both electrolytes ...
Compatibilization of polymer blends by the addition of graft copolymers
(Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characteriz, 2019)
Polymer blends are mixtures of two or more polymers that are very often immiscible components and they need to be compatibilized. The compatibilization must not only ensure improvement in microstructure uniformity, but ...
Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag
(MDPI, Basel, 2019)
Reuse of waste is one of the main principles of sustainable development and circular economy. Secondary alkaline lead slag is a hazardous waste generated in the recycling process of lead-acid batteries that may be suitable ...
Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release
(Elsevier Science Bv, Amsterdam, 2019)
Amorphous, medical grade poly(D,L-lactic acid) (PLA) and poly(D,L-lactic-co-glycolic acid) (PLGA) were used to develop systems for controlled release of a natural bioactive substance - thymol. Supercritical carbon dioxide ...