Pretraživanje
Prikaz rezultata 1-10 od 3530
Photodegradation of an azo pyridone dye using TiO2 films prepared by the spray pyrolysis method
(Elsevier Science Sa, Lausanne, 2012)
In this study, the feasibility of preparing porous TiO2 films on a stainless steel substrate from a hydrothermally prepared colloidal TiO2 solution by the spray pyrolysis technique is presented. The prepared samples were ...
Behaviour of non-standard composition copper bearing anodes from the copper refining process
(Elsevier Science Bv, Amsterdam, 2010)
This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, ...
Preparation and Thermal Stability of Elastomers Based on Irregular Poly(urethane-isocyanurate) Networks
(Taylor & Francis Inc, Philadelphia, 2009)
The objective of this study was to investigate the thermal stability of poly(urethane-isocyanurate) networks with increasing amount of dangling chains. In order to improve thermal stability of elastomeric materials, networks ...
Examination of rheological properties of fine particles as carriers for controlled drug release
(Taylor & Francis Inc, Philadelphia, 2003)
Development of lipid-based fine particles as potential drug carriers requires detailed investigation of possible effects of these carriers on rheological properties of blood. In this study, we have investigated the influence ...
Electrodeposited hydroxyapatite thin films modified by ion beam irradiation
(Natl Inst Optoelectronics, Bucharest-Magurele, 2009)
Surface modification of hydroxyapatite (HA) thin films electrodeposited on titanium was conducted by ion implantation, using nitrogen and argon ions at different constant fluences of 1x10(15), 1x10(16) and 1x10(17) ions/cm(2). ...
Silver/poly(vinyl alcohol)/graphene hydrogels for wound dressing applications: Understanding the mechanism of silver, antibacterial agent release
(Journal of Vinyl & Additive Technology, 2022)
Long-term wound healing and chronic wound care represent significant challenges for biomaterials science and engineering with many diverse requirements for the wound dressing properties, as well as antibacterial efficacy ...
Danube and Sava river sediment monitoring in Belgrade and its surroundings
(Taylor & Francis Inc, Philadelphia, 2008)
Belgrade is the largest city in Serbia located at the confluence of river Sava to the Danube river. The quality of water and sediments of rivers which run through Belgrade is of a significant importance, since water from ...
Thermal Properties of PMMA/TiO2 Nanocomposites Prepared by In-Situ Bulk Polymerization
(Wiley-Blackwell, Malden, 2009)
The surface of anatase TiO2 nanoparticles, obtained by the controlled hydrolysis of titanium tetrachloride, was modified by 6-palmitate ascorbic acid. The surface modified TiO2 nanoparticles were dispersed in methyl ...
Influence of cubic alpha-Fe2O3 particles on the thermal stability of poly(methyl methacrylate) synthesized by in situ bulk polymerization
(Elsevier Sci Ltd, Oxford, 2009)
Poly(methyl methacrylate)/alpha-Fe2O3 Composites were prepared by in situ bulk radical polymerization of methyl methacrylate in the presence of the cubic alpha-Fe2O3 particles using 2,2'-azobisisobutyronitrile as initiator. ...
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...