Pretraživanje
Prikaz rezultata 1-10 od 18
Using the image analysis program for prediction of thermal stability behavior of refractory specimen
(8th International Symposium on Multifunctional and Functionally Graded Materials, FGM2004, 2005)
Most important properties which are usually measured for refractories are work temperature and thermal stability. Thermal stability of the alumina based samples was measured using a standard laboratory procedure, the water ...
Assessment of viscoelastic crack bridging toughening in refractory materials
(Elsevier Sci Ltd, Oxford, 2008)
Viscoelastic bridges can be formed in refractory ceramics while cooling from high temperatures. Such bridges can shield crack tips, thus reducing the effective crack tip stress intensity factors leading to higher resistance ...
The use of image analysis for the study of interfacial bonding in solid composite propellant / Korišćenje analize slike za određivanje interakcija u čvrstim kompozitnim gorivima
(Serbian Chemical Society, Belgrade, 2007)
In the framework of this research, the program Image Pro Plus was applied for determining the polymer-oxidizer interactions in HTPB-based composite propellants. In order to improve the interactions, different bonding agents ...
Cavitation damage of the medium carbon steel: Implementation of image analysis
(Elsevier Science Bv, Amsterdam, 2008)
Cavitation damage of the medium carbon steel was performed using the modified vibratory cavitation test set up. Erosion rates were measured by analytical method. The morphology of damage under cavitation action was determined ...
Thermal stability of cordierite/silicon carbide composites after cyclic thermal shock
(Natl Inst Optoelectronics, Bucharest-Magurele, 2008)
In this paper composite material made from silicium carbide and cordierite was used in experiments. Behavior of the material in conditions of rapid temperature changes was investigated. Modified water quench test was applied ...
Thermal stability testing of refractory specimen
(Amer Soc Testing Materials, W Conshohocken, 2006)
The most important properties usually measured for refractories are working temperature and thermal stability. Thermal stability of the alumina based samples was measured using standard laboratory procedure, water quench ...
Rotating disk alumina precursor fiber formation process stability determination using image analysis
(Savez inženjera metalurgije Srbije, Beograd, 2002)
Precursor fibers are made from the aluminium-hydroxide chloride based sols. The process stability can be influenced both by the fiber formation conditions and the rheology of the sol. The distance from the disk canter is ...
An improved method for thermal stability behavior characterization of silicon carbide/cordierite composite material
(Savez inženjera metalurgije Srbije, Beograd, 2007)
In the present work Mg-exchanged zeolit and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 50:50. Samples were exposed to the water quench test from 950°C, ...
Microstructural dependence of fracture toughness in high-strength 7000 forging alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The effects of microstructural parameters associated with the coarse intermetallic phases particles and precipitates on the fracture toughness of the overaged 7000 alloy forgings are investigated. Detailed microstructural ...
The influences of multiscale-sized second-phase particles on fracture behaviour of overaged 7000 alloys
(Procedia Engineering, 2009)
To identify the most important parameters of multiscale microstructural features influencing the fracture modes and resistance to damage, detailed microstructural and fractographic analysis of overaged 7000 alloy plates ...