Претраживање
Приказ резултата 1-10 од 216
Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings
(Elsevier, 2006)
In this article, a multiple micromechanisms-based model that quantitatively relates the plane-strain fracture toughness, KIC, of overaged 7000 alloy forgings to their microstructural attributes, fracture surface morphology ...
Modelling of plasma activated CVD of Co-C-O layers in parallel plate reactor
(Elsevier, 2006)
A modelling procedure for Co-C-O layers generated on steel C35 from cobalt(II) acetylacetonate by PACVD is suggested. The investigations were carried out in a parallel plate reactor, under a radio frequency (13.56 MHz) ...
Characterization of Structure and Properties of As-cast AlCuMg Alloys
(Japan Institute of Metals (JIM), 2004)
Early stages of transformation of a metastable AlCuMg alloy have been studied by DSC, X-ray powder diffraction method, quantitative microstructure analysis, hardness, compression strength and by scanning electron microscope. ...
Synthesis and characterization of MoOx-Pt/C and TiOx-Pt/C nano-catalysts for oxygen reduction
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
The oxygen reduction reaction (ORR) was studied at carbon supported MoOx-Pt/C and TiOx-Pt nanocatalysts in 0.5 mol dm(-3) HClO4 solution, at 25 degrees C. The MoOx-Pt/C and TiOx-Pt/C catalysts were prepared by the polyole ...
Leaching of copper(I) sulfide in calcium chloride solution
(Elsevier, 2000)
Finely grained samples of copper(I) sulphide were leached by CaCl2·2H2O solution with added HCl and the introduction of gaseous oxygen. The occurrence probability of chemical reactions was analyzed based on literature and ...
The elusive metastable peak.
(Wiley-Blackwell, 2004)
SmartMetals: a new method for metal identification based on fuzzy logic
(John Wiley & Sons Ltd, Chichester, 2009)
This paper presents a method of searching, identifying and cross-referencing metal alloys based on their chemical composition and/or mechanical properties, typically obtained by analysis and tests. The method uses a general ...
Effect of different fermentation parameters on bioethanol production from corn meal hydrolyzates by free and immobilized cells of Saccharomyces cerevisiae var. ellipsoideus
(Wiley, Hoboken, 2009)
BACKGROUND: Bioethanol produced from renewable biomass, such as corn meal, is a biofuel that is both renewable and environmentally friendly. Significant scientific and technological investments will be needed to achieve ...
The effect of the mass ratio of hard and soft segments on some properties of thermoplastic poly(ester-siloxane)s
(John Wiley and Sons Ltd, 2004)
A series of thermoplastic elastomers based on soft polydimethylsiloxane (PDMS) and hard poly(butylene terephthalate) (PBT) segments was synthesized using a two-step transesterification reaction in the melt. The molar mass ...
Catalytic incineration of ethylene oxide in the packed bed reactor
(Elsevier, 2006)
Investigations of catalytic incineration of ethylene oxide (ETO) over Pt/Al2O3 catalyst have been conducted on laboratory and pilot scale level. The measurements of the reaction rate conducted under gradientless conditions ...